Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
you need to add this setting to sofia.conf.xml param name=auto-restart value=false/ You'll also need to edit the sofia profiles and input the exact IP you wish it to bind to. The params are sip-ip and rtp-ip. /b On Feb 1, 2009, at 3:24 PM, c...@eugeneweb.com wrote: Hi Gang, I've been struggleing with this also. Actually I can get it to bind to my address, the problem is it randomly drops my calls. :-( I have a FS running on a box with a static IP and I can start a call between two extensions and it will go for hours. Then I add anther interface say eth0:0 with a new static IP and reconfigure my phones and FS to use that, and the calls drop after about 15-20 mins. Though it's pretty random. Here is my setup. I have Debian Linux 2.6.23.1 kernel, and freeswitch-1.0.1. Here is my /etc/network/interfaces: # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # The loopback interface auto lo iface lo inet loopback # The first network card - this entry was created during the Debian installation auto eth0 eth0:0 iface eth0 inet dhcp iface eth0:0 inet static address 192.168.0.249 netmask 255.255.255.0 gateway 192.168.0.254 The only change I made to the FS config is in Vars.xml. I added this line close to the top: X-PRE-PROCESS cmd=set data=local_ip_v4=192.168.0.249/ Here is the console log of the call being dropped: freeswi...@archive sofia status API CALL [sofia(status)] output: NameType Data State = = = = = = = = = = = = = = = = = = = = = = = = = = = == external profile sip:mod_so...@67.171.158.226:5080 RUNNING (0) internal profile sip:mod_so...@192.168.0.249:5060 RUNNING (2) nat profile sip:mod_so...@67.171.158.226:5070 RUNNING (0) default alias internal ALIASED outbound alias external ALIASED 192.168.0.249 alias internal ALIASED = = = = = = = = = = = = = = = = = = = = = = = = = = = == 3 profiles 3 aliases freeswi...@archive 2009-02-01 13:23:19 [NOTICE] sofia_glue.c:2634 sofia_glue_restart_all_profiles() Reload XML [Success] 2009-02-01 13:23:19 [INFO] mod_enum.c:817 event_handler() ENUM Reloaded 2009-02-01 13:23:19 [NOTICE] mod_sofia.c:568 sofia_read_frame() Hangup sofia/internal/ 1...@192.168.0.53:5060;user=phone;transport=udp;fs_nat=yes [CS_EXCHANGE_MEDIA] [NORMAL_CLEARING] 2009-02-01 13:23:19 [NOTICE] switch_ivr_bridge.c:820 switch_ivr_multi_threaded_bridge() Hangup sofia/internal/1...@192.168.0.249 [CS_EXECUTE] [NORMAL_CLEARING] 2009-02-01 13:23:19 [NOTICE] switch_core_session.c:807 switch_core_session_thread() Session 6 (sofia/internal/ 1...@192.168.0.53:5060;user=phone;transport=udp;fs_nat=yes) Ended 2009-02-01 13:23:19 [NOTICE] switch_core_session.c:809 switch_core_session_thread() Close Channel sofia/internal/ 1...@192.168.0.53:5060;user=phone;transport=udp;fs_nat=yes [CS_HANGUP] 2009-02-01 13:23:19 [NOTICE] switch_core_session.c:807 switch_core_session_thread() Session 5 (sofia/internal/1...@192.168.0.249 ) Ended 2009-02-01 13:23:19 [NOTICE] switch_core_session.c:809 switch_core_session_thread() Close Channel sofia/internal/1...@192.168.0.249 [CS_HANGUP] 2009-02-01 13:23:19 [NOTICE] sofia.c:645 sofia_profile_thread_run() waiting for worker thread 2009-02-01 13:23:19 [NOTICE] sofia.c:645 sofia_profile_thread_run() waiting for worker thread 2009-02-01 13:23:19 [NOTICE] sofia.c:1865 config_sofia() Adding Alias [192.168.0.249] for profile [internal] 2009-02-01 13:23:19 [NOTICE] sofia.c:1865 config_sofia() Adding Alias [default] for profile [internal] 2009-02-01 13:23:19 [NOTICE] sofia.c:1875 config_sofia() Started Profile internal [sofia_reg_internal] 2009-02-01 13:23:20 [NOTICE] sofia.c:1865 config_sofia() Adding Alias [outbound] for profile [external] 2009-02-01 13:23:20 [NOTICE] sofia.c:1875 config_sofia() Started Profile external [sofia_reg_external] 2009-02-01 13:23:20 [NOTICE] sofia.c:645 sofia_profile_thread_run() waiting for worker thread 2009-02-01 13:23:20 [NOTICE] sofia.c:1875 config_sofia() Started Profile nat [sofia_reg_nat] sofia status API CALL [sofia(status)] output: NameType Data State = = = = = = = = = = = = = = = = = = = = = = = = = = = == external profile sip:mod_so...@67.171.158.226:5080
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
Hi Gang, I've been struggleing with this also. Actually I can get it to bind to my address, the problem is it randomly drops my calls. :-( I have a FS running on a box with a static IP and I can start a call between two extensions and it will go for hours. Then I add anther interface say eth0:0 with a new static IP and reconfigure my phones and FS to use that, and the calls drop after about 15-20 mins. Though it's pretty random. Here is my setup. I have Debian Linux 2.6.23.1 kernel, and freeswitch-1.0.1. Here is my /etc/network/interfaces: # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # The loopback interface auto lo iface lo inet loopback # The first network card - this entry was created during the Debian installation auto eth0 eth0:0 iface eth0 inet dhcp iface eth0:0 inet static address 192.168.0.249 netmask 255.255.255.0 gateway 192.168.0.254 The only change I made to the FS config is in Vars.xml. I added this line close to the top: X-PRE-PROCESS cmd=set data=local_ip_v4=192.168.0.249/ Here is the console log of the call being dropped: freeswi...@archive sofia status API CALL [sofia(status)] output: Name Type Data State = external profile sip:mod_so...@67.171.158.226:5080 RUNNING (0) internal profile sip:mod_so...@192.168.0.249:5060 RUNNING (2) nat profile sip:mod_so...@67.171.158.226:5070 RUNNING (0) defaultalias internal ALIASED outboundalias external ALIASED 192.168.0.249alias internal ALIASED = 3 profiles 3 aliases freeswi...@archive 2009-02-01 13:23:19 [NOTICE] sofia_glue.c:2634 sofia_glue_restart_all_profiles() Reload XML [Success] 2009-02-01 13:23:19 [INFO] mod_enum.c:817 event_handler() ENUM Reloaded 2009-02-01 13:23:19 [NOTICE] mod_sofia.c:568 sofia_read_frame() Hangup sofia/internal/1...@192.168.0.53:5060;user=phone;transport=udp;fs_nat=yes [CS_EXCHANGE_MEDIA] [NORMAL_CLEARING] 2009-02-01 13:23:19 [NOTICE] switch_ivr_bridge.c:820 switch_ivr_multi_threaded_bridge() Hangup sofia/internal/1...@192.168.0.249 [CS_EXECUTE] [NORMAL_CLEARING] 2009-02-01 13:23:19 [NOTICE] switch_core_session.c:807 switch_core_session_thread() Session 6 (sofia/internal/1...@192.168.0.53:5060;user=phone;transport=udp;fs_nat=yes) Ended 2009-02-01 13:23:19 [NOTICE] switch_core_session.c:809 switch_core_session_thread() Close Channel sofia/internal/1...@192.168.0.53:5060;user=phone;transport=udp;fs_nat=yes [CS_HANGUP] 2009-02-01 13:23:19 [NOTICE] switch_core_session.c:807 switch_core_session_thread() Session 5 (sofia/internal/1...@192.168.0.249) Ended 2009-02-01 13:23:19 [NOTICE] switch_core_session.c:809 switch_core_session_thread() Close Channel sofia/internal/1...@192.168.0.249 [CS_HANGUP] 2009-02-01 13:23:19 [NOTICE] sofia.c:645 sofia_profile_thread_run() waiting for worker thread 2009-02-01 13:23:19 [NOTICE] sofia.c:645 sofia_profile_thread_run() waiting for worker thread 2009-02-01 13:23:19 [NOTICE] sofia.c:1865 config_sofia() Adding Alias [192.168.0.249] for profile [internal] 2009-02-01 13:23:19 [NOTICE] sofia.c:1865 config_sofia() Adding Alias [default] for profile [internal] 2009-02-01 13:23:19 [NOTICE] sofia.c:1875 config_sofia() Started Profile internal [sofia_reg_internal] 2009-02-01 13:23:20 [NOTICE] sofia.c:1865 config_sofia() Adding Alias [outbound] for profile [external] 2009-02-01 13:23:20 [NOTICE] sofia.c:1875 config_sofia() Started Profile external [sofia_reg_external] 2009-02-01 13:23:20 [NOTICE] sofia.c:645 sofia_profile_thread_run() waiting for worker thread 2009-02-01 13:23:20 [NOTICE] sofia.c:1875 config_sofia() Started Profile nat [sofia_reg_nat] sofia status API CALL [sofia(status)] output: Name Type Data State = external profile sip:mod_so...@67.171.158.226:5080 RUNNING (0) internal profile sip:mod_so...@192.168.0.249:5060 RUNNING (0) outboundalias external ALIASED 192.168.0.249alias internal ALIASED nat profile sip:mod_so...@67.171.158.226:5070 RUNNING (0) defaultalias internal ALIASED = 3 profiles 3 aliases There is an older thread that says one
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
That is the DOMAIN not the IP... Hence the name is domain... If you look
thru vars.xml you¹ll see other variables for the IP...
From: mszla...@aol.com
Reply-To: freeswitch-users@lists.freeswitch.org
Date: Sun, 04 Jan 2009 15:14:27 -0500
To: freeswitch-users@lists.freeswitch.org
Subject: [Freeswitch-users] How do I set my FS internal ip address to a
static value.
I believe there is a variable $${domain} that is used by FreeSwitch for it's
internal IP address. This address was 10.0.0.2 but changes when I connect or
disconnect things to my computer and I wanted to make it static. The
Getting Started Guide suggests this is do-able but it seems I have to
change things in several places besides vars.xml like
\sip_profiles\internal.xml and maybe other places. Is there some general way
to set my internal domain?
Thanks.
Get a free MP3 every day with the Spinner.com Toolbar. Get it Now
http://toolbar.aol.com/spinner/download.html?ncid=emlweusdown0020 .
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
Ok, so is it $${local_ip_v4} that needs changing somewhere? I see stuff in
vars.xml for external address changes but not for internal ip address changes??
-Original Message-
From: Ken Rice kr...@suspicious.org
To: freeswitch-users@lists.freeswitch.org
Sent: Sun, 4 Jan 2009 12:48 pm
Subject: Re: [Freeswitch-users] How do I set my FS internal ip address to a
static value.
That is the DOMAIN not the IP... Hence the name is domain... If you look thru
vars.xml you’ll see other variables for the IP...
From: mszla...@aol.com
Reply-To: freeswitch-users@lists.freeswitch.org
Date: Sun, 04 Jan 2009 15:14:27 -0500
To: freeswitch-users@lists.freeswitch.org
Subject: [Freeswitch-users] How do I set my FS internal ip address to a
static value.
I believe there is a variable $${domain} that is used by FreeSwitch for it's
internal IP address. This address was 10.0.0.2 but changes when I connect or
disconnect things to my computer and I wanted to make it static. The Getting
Started Guide suggests this is do-able but it seems I have to change things in
several places besides vars.xml like \sip_profiles\internal.xml and maybe other
places. Is there some general way to set my internal domain?
Thanks.
Get a free MP3 every day with the Spinner.com Toolbar. Get it Now
http://toolbar.aol.com/spinner/download.html?ncid=emlweusdown0020 .
___
Freeswitch-users mailing li
st
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
or you can open the confit in sip_profiles/*.xml and input the sip-ip
and rtp-ip for the sofia profile.
/b
On Jan 4, 2009, at 3:05 PM, mszla...@aol.com wrote:
Ok, so is it $${local_ip_v4} that needs changing somewhere? I see
stuff in vars.xml for external address changes but not for internal
ip address changes??
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
mszla...@aol.com mszla...@aol.com wrote:
Ok, so is it $${local_ip_v4} that needs changing somewhere? I see stuff in
vars.xml for external address changes but not for internal ip address
changes??
If you set $${local_ip_v4} in vars.xml it will determine which address
FreeSWITCH binds to, at least in the default configuration.
Addresses can be configured more flexibly in the SIP profiles.
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
I see the following in that file:
? X-PRE-PROCESS cmd=set data=bind_server_ip=auto/
and thought that's what might need changing to:
? X-PRE-PROCESS cmd=set data=bind_server_ip=10.0.0.3/
But your looking at the same variable I was and I'm guessing something else
might be in order like:
X-PRE-PROCESS cmd=set data=local_ip_v4=10.0.0.3/
I'll see if either of these work unless you have a different suggestion.
You and Brian also suggested a more specific approach in sip_profiles/*.xml and
input the sip-ip and rtp-ip for the sofia profile.
??? param name=sip-ip value=$${local_ip_v4}/? to param
name=sip-ip value=10.0.0.3/
??? param name=rtp-ip value=$${local_ip_v4}/?? to param
name=rtp-ip value=10.0.0.3/
What's the advantage to doing it in the sip_profiles\internal.xml file over the
general way in vars.xml?
?
?
-Original Message-
From: Jason White ja...@jasonjgw.net
To: freeswitch-users@lists.freeswitch.org
Sent: Sun, 4 Jan 2009 3:15 pm
Subject: Re: [Freeswitch-users] How do I set my FS internal ip address to a
static value.
mszla...@aol.com mszla...@aol.com wrote:
Ok, so is it? $${local_ip_v4} that needs changing somewhere? I see stuff in
vars.xml for external address changes but not for internal ip address
changes??
If you set $${local_ip_v4} in vars.xml it will determine which address
FreeSWITCH binds to, at least in the default configuration.
Addresses can be configured more flexibly in the SIP profiles.
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
mszla...@aol.com mszla...@aol.com wrote: What's the advantage to doing it in the sip_profiles\internal.xml file over the general way in vars.xml? The obvious advantage is that you can set those RTP and SIP addresses independently of each other in the profile, so presumably they could be different if that's what you wanted. ___ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
I'm going to guess you don't have the latest configs. bind_server_ip
is for Dingaling ONLY at this point and is noted with the nice HUGE
warning above the setting. You can set the local_ip_v4 address but
you're better off setting the ip's in the profile.
/b
On Jan 4, 2009, at 6:23 PM, mszla...@aol.com wrote:
I see the following in that file:
X-PRE-PROCESS cmd=set data=bind_server_ip=auto/
and thought that's what might need changing to:
X-PRE-PROCESS cmd=set data=bind_server_ip=10.0.0.3/
But your looking at the same variable I was and I'm guessing
something else might be in order like:
X-PRE-PROCESS cmd=set data=local_ip_v4=10.0.0.3/
I'll see if either of these work unless you have a different
suggestion.
You and Brian also suggested a more specific approach in
sip_profiles/*.xml and input the sip-ip and rtp-ip for the sofia
profile.
param name=sip-ip value=$${local_ip_v4}/ to
param name=sip-ip value=10.0.0.3/
param name=rtp-ip value=$${local_ip_v4}/ to
param name=rtp-ip value=10.0.0.3/
What's the advantage to doing it in the sip_profiles\internal.xml
file over the general way in vars.xml?
-Original Message-
From: Jason White ja...@jasonjgw.net
To: freeswitch-users@lists.freeswitch.org
Sent: Sun, 4 Jan 2009 3:15 pm
Subject: Re: [Freeswitch-users] How do I set my FS internal ip
address to a static value.
mszla...@aol.com mszla...@aol.com wrote:
Ok, so is it $${local_ip_v4} that needs changing somewhere? I
see stuff in
vars.xml for external address changes but not for internal ip
address
changes??
If you set $${local_ip_v4} in vars.xml it will determine which address
FreeSWITCH binds to, at least in the default configuration.
Addresses can be configured more flexibly in the SIP profiles.
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Get a free MP3 every day with the Spinner.com Toolbar. Get it Now.
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
Brian and Jason.
I tried changing $${local_ip_v4} to a static IP in the vars.xml and internal
and external sip_profiles files. This didn't work.
What I want to do is maybe more related to what local ip address my Windows
machine binds FreeSwitch to. It's currently associating it to 10.0.0.2 if I
change? $${local_ip_v4} to 10.0.0.3 then FS gets errors and sofia status
doesn't show any ip address associated with FS.
I'm guessing I need to get Windows always associating FS with a static IP
instead of a possibly changing value. I did this with a Linksys SPA3103 in it's
configuration menu so is there something analogous for FS and how do I do that?
Thanks.
-Original Message-
From: Brian West br...@freeswitch.org
To: freeswitch-users@lists.freeswitch.org
Sent: Sun, 4 Jan 2009 5:56 pm
Subject: Re: [Freeswitch-users] How do I set my FS internal ip address to a
static value.
I'm going to guess you don't have the latest configs. ?bind_server_ip is for
Dingaling ONLY at this point and is noted with the nice HUGE warning above the
setting. You can set the local_ip_v4 address but you're better off setting the
ip's in the profile.
/b
On Jan 4, 2009, at 6:23 PM, mszla...@aol.com wrote:
I see the following in that file:
? X-PRE-PROCESS cmd=set data=bind_server_ip=auto/
and thought that's what might need changing to:
? X-PRE-PROCESS cmd=set data=bind_server_ip=10.0.0.3/
But your looking at the same variable I was and I'm guessing something else
might be in order like:
X-PRE-PROCESS cmd=set data=local_ip_v4=10.0.0.3/
I'll see if either of these work unless you have a different suggestion.
You and Brian also suggested a more specific approach in sip_profiles/*.xml
and input the sip-ip and rtp-ip for the sofia profile.
??? param name=sip-ip value=$${local_ip_v4}/? to param
name=sip-ip value=10.0.0.3/
??? param name=rtp-ip value=$${local_ip_v4}/?? to param
name=rtp-ip value=10.0.0.3/
What's the advantage to doing it in the sip_profiles\internal.xml file over
the general way in vars.xml?
?
?
-Original Message-
From: Jason White ja...@jasonjgw.net
To: freeswitch-users@lists.freeswitch.org
Sent: Sun, 4 Jan 2009 3:15 pm
Subject: Re: [Freeswitch-users] How do I set my FS internal ip address to a
static value.
mszla...@aol.com mszla...@aol.com wrote:
Ok, so is it? $${local_ip_v4} that needs changing somewhere? I see stuff in
vars.xml for external address changes but not for internal ip address
changes??
If you set $${local_ip_v4} in vars.xml it will determine which address
FreeSWITCH binds to, at least in the default configuration.
Addresses can be configured more flexibly in the SIP profiles.
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Get a free MP3 every day with the Spinner.com Toolbar. Get it Now.
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
=
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
Well I did say open up sip_profiles/internal.xml or sip_profiles/
external.xml and every place it has $${local_ip_v4} REPLACE IT with
the desired IP. Is 10.0.0.3 bound to your windows machine?
/b
On Jan 5, 2009, at 12:06 AM, mszla...@aol.com wrote:
I tried changing $${local_ip_v4} to a static IP in the vars.xml and
internal and external sip_profiles files. This didn't work.
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
mszla...@aol.com mszla...@aol.com wrote:
I tried changing $${local_ip_v4} to a static IP in the vars.xml and internal
and external sip_profiles files. This didn't work.
Make sure that one of your network interfaces - the one that you want
FreeSWITCH to use - is assigned that address first, otherwise there will be
nothing for FreeSWITCH to bind to when it starts.
I don't know much about Windows, so if you're running FreeSWITCH on Windows,
I'm sure there will be others on the list who are in a position to help.
If you're using Linux, just make sure that the address you want is associated
with an interface, e.g., using ifconfig, then start FreeSWITCH with the
pre-processor variable $${local_ip_v4} set appropriately.
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
Brian, I did that and know it was every instance since I used Textpad's
replace function.
-Original Message-
From: Brian West br...@freeswitch.org
To: freeswitch-users@lists.freeswitch.org
Sent: Sun, 4 Jan 2009 10:13 pm
Subject: Re: [Freeswitch-users] How do I set my FS internal ip address to a
static value.
Well I did say open up sip_profiles/internal.xml or sip_profiles/external.xml
and every place it has $${local_ip_v4} REPLACE IT with the desired IP.
?Is?10.0.0.3 bound to your windows machine?
/b
On Jan 5, 2009, at 12:06 AM, mszla...@aol.com wrote:
I tried changing $${local_ip_v4} to a static IP in the vars.xml and internal
and external sip_profiles files. This didn't work.
=
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Re: [Freeswitch-users] How do I set my FS internal ip address to a static value.
Jason, I have no idea either but if I assign an IP address to the network
interface, say 10.0.0.3 then I may have another problem. I have a Voxeo
Prophecy ASR server being assigned to 10.0.0.2. Actually both FS and Prophecy
were being assigned by Windows to 10.0.0.2 but this was causing audio transfer
problems when I bridged FS to Prophecy. So I wanted to assign FS to something
else but I *believe* that Windows only uses one adaptor. What I need to do next
I don't know (create another adaptor) and probably I've never done.
-Original Message-
From: Jason White ja...@jasonjgw.net
To: freeswitch-users@lists.freeswitch.org
Sent: Sun, 4 Jan 2009 10:17 pm
Subject: Re: [Freeswitch-users] How do I set my FS internal ip address to a
static value.
mszla...@aol.com mszla...@aol.com wrote:
I tried changing $${local_ip_v4} to a static IP in the vars.xml and internal
and external sip_profiles files. This didn't work.
Make sure that one of your network interfaces - the one that you want
FreeSWITCH to use - is assigned that address first, otherwise there will be
nothing for FreeSWITCH to bind to when it starts.
I don't know much about Windows, so if you're running FreeSWITCH on Windows,
I'm sure there will be others on the list who are in a position to help.
If you're using Linux, just make sure that the address you want is associated
with an interface, e.g., using ifconfig, then start FreeSWITCH with the
pre-processor variable $${local_ip_v4} set appropriately.
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
