Re: [Freevo-users] cvs build
On Tue, 2004-01-13 at 15:34, Mick wrote: where do we find the nightly builds? OK, found it.. Can we add this to the downloads section on the website? no Also, there is no news about 1.4.1 being released on it.. this point still stands though ;-) Cheers, Mick --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] cvs build
Hi, Snapshots are here : http://freevo.sourceforge.net/snapshots/ If you are using gentoo, you can use Dichi's ebuild, download the rsync script, don't forget to set the portage overlay dir (/etc/make.conf) rsync-freevo script under gentoo : http://freevo.sourceforge.net/install.html#Download Bart -- Original Message -- From: Mick [EMAIL PROTECTED] To: [EMAIL PROTECTED] [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] Date: Tue, 13 Jan 2004 15:34:36 +0800 Subject: [Freevo-users] cvs build where do we find the nightly builds? Can we add this to the downloads section on the website? Also, there is no news about 1.4.1 being released on it.. Cheers, Mick --- This SF.net ema l is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html __ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
AW: [Freevo-users] Setting up a freevo box on MSI Hermes 651P...
Hi, thanks for the feedback. Please find my comments to your comments between the lines. -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:freevo-users- [EMAIL PROTECTED] Im Auftrag von Gray, Tim Gesendet: Montag, 12. Januar 2004 19:46 An: '[EMAIL PROTECTED]' Betreff: RE: [Freevo-users] Setting up a freevo box on MSI Hermes 651P... good luck getting mplayer to play anything fullscreen on any framebuffer other than the Matrox G400. It is already working. The only tricky thing was the append line in lilo.conf. and if you do find a way to get mplayer to play fullscreen on the generic framebuffer... please let me know! The generic frame buffer does not work. I am using the sisfb driver. The generic frame buffer only let me use 640x480x8. I strongly suggest you go the X window route to get mplayer to scale fullscreen, Perhaps you mean hardware scaling? Software scaling works. do not use a window manager as that adds only un-needed bloat, specifying a single line to start freevo in your .xinitrc should do the job. I thought that the X window system itself is un-needed bloat compared to the frame buffer solution. But perhaps I am missing something here. I will try your suggestion. Perhaps the bloat really only consists in the window manager. KDE really needs a little time to start up. use the sis driver in Xfree86. although the vesa driver also works with this chipset and still enables the XV playback acceleration on mpeg2 files. There is one sis driver in debian woody which does not seem to work. I am going to try to download it from Thomas Winischhofers page. Also cince you have i810 for your audio, you are also suffering with the chipset limitations... the latest alsa fixes most of those, the OSS drivers I believe are legacy as alsa is now the standard for linux sound as of 2.4.6.. Ok, I have heard of this. But it was really easy to get OSS running and it sounds good... Which limitations do I have with this? you MUST set mplayer to record at 48000 if you are recording from the line-in. and the sound is cleaner if you are able to force the sound output to 48000. I have not tried recording yet... It sounds like your machine has the same hardware my micro-ATX motherboard has..(except for the tv out... that is nice that yours has that.) Yes, that's one reason I have bought exactly this box. It should have a really good TV out. Which I haven't even tried out yet... Regards, Thorsten -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Pferdekaemper, Thorsten Sent: Monday, January 12, 2004 12:38 PM To: [EMAIL PROTECTED] Subject: [Freevo-users] Setting up a freevo box on MSI Hermes 651P... Hi, I am currently setting up a freevo box on a MSI Hermes 651P. I would like to share my experiences, problems and solutions I found out. Perhaps someone is interested... Regards, Thorsten 1. The idea === Last year, I began to digtize some old videotapes. I also began to use my computer as a video recorder and I also collected some shows in divx [skipped my own bla bla] --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
AW: [Freevo-users] Re: Setting up a freevo box on MSI Hermes 651P ...
Hi, I could do framebuffer output after chmod a+rw /dev/fb*... But I think I am going to switch to X without window manager as Tim suggested. Kind regards, Thorsten -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:freevo-users- [EMAIL PROTECTED] Im Auftrag von Dirk Meyer Gesendet: Montag, 12. Januar 2004 20:29 An: [EMAIL PROTECTED] Betreff: [Freevo-users] Re: Setting up a freevo box on MSI Hermes 651P... Pferdekaemper, Thorsten wrote: I chmod'd /dev/fb0, /dev/mixer and /dev/psaux (there's the mouse...). A few things are working now. But it seems that there is missing something. Is there a way to really run freevo with a user other than root? It should, it works for me using X. You need access to all devices freevo needs (like /dev/dsp0). But for some reasons, framebuffer output doesn't work for me as user. It's more a SDL problem than a freevo one. It also seems that freevo does not like it at all when I try to enter a directory (e.g. from the Play music menu) and there are files which freevo is not allowed to read. There is no message about authorization but a crash message. mmpython bug, latest mmpython cvs should fix this. Dischi -- Your job is being a professor and researcher: That's one hell of a good excuse for some of the brain-damages of minix. -Linus Torvalds to Andrew Tanenbaum --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] Timed recording from line in?
I can't see any information in the docs about timed recording of audio-only from the soundcard line inputs- is it possible? I typically record a couple of radio programmes each week, I can download the station schedules and have the tuner output connected to the line in. How do I set freevo to record them? Nigel --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Menu_select crashing
On Tuesday 13 January 2004 02:16, Robert Lunnon wrote: When reading some ogg directories (With m3u playlists) Freevo crashes in MENU_SELECt right after it says scanning directory how can I determine why this is happenning and/or fix it. Bob Hmm, I have discovered that it is the m3u playlist that is causing the crash, there are a couple of odd filenames in there, two with an ! and one with a double period .. perhaps one of these is destabilising the menu generator --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Menu_select crashing
On Tuesday 13 January 2004 02:16, Robert Lunnon wrote: When reading some ogg directories (With m3u playlists) Freevo crashes in MENU_SELECt right after it says scanning directory how can I determine why this is happenning and/or fix it. Bob Problem found Freevos menu generator does not like ! in the titles within the #EXTINF lines in the playlist file. I remove the exclamation marks then I dont get the crash. --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] TV out resolution on a ATI AIWonder card? (Wa s DirectFB help)
th etv out resolution is 720x480 in the united states and japan + the vertical blanking lines that you dont see. no matter what you set the card to, 640x480 or 800x600 you will get the 720x480 standard NTSC size out the tv out. This is the same for any TV out. it only outputs either a NTSC standard signal or a PAL standard signal. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bill Sent: Monday, January 12, 2004 6:12 PM To: [EMAIL PROTECTED] Subject: [Freevo-users] TV out resolution on a ATI AIWonder card? (Was DirectFB help) Does anyone here know what the output resolution is on the AIW card? I plan on using the s-video out on the card. I am still fighting with a Gentoo install (first time I ever tried to use Gentoo) but once its working I plan on installing Freevo and making it a dedicated recorder. PS - I ended up picking up a KT4VM board with a Athlon 2400+ for the MB. --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] Jump to active/detached Player
Hi All! Is there any chance to directly jump to the active/detached Player! Reason being. I am using Freevo mainly with a remote control and sometimes without TV. So my problem is when I have detached e.g. the audio player and just want to pause the music I don't want switch on the TV to check how to go to the detached player. I just want to press pause (or one button before) to pause the song! Cheers Fred --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] recording daemon py??
Hello.. I've been trying to get freevo 100% setup for some time now. I finally got it working with my 36" VGA monitor. The monitor only runs 640 x 480 , the guide is still a little off centered but everything else is good now , just can't see the channel numbers etc... I am having trouble following the docs on recording though.. I have setup freevo , and it works , I goto the guide and hit f6 on a program , it tells me that it is scheduled to be recorded , and the webfront says that it is recording it , however , it never gets recorded.. I have my record directory set to /media/tv and nothing ever shows up , It freely lets me pick other channels even though it shouldn't so that it can record etc.. The docs all mention entering a cron to run recorddaemon.py or something but that file doesn't exist in my /src/tv directory.. Is this a new thing some new way of doing it , I have the recordserver running constantly as well using /usr/local/freevo/freevo recordserver and i verify that it's running by issuing /usr/local/freevo/freevo recordserver and it responds with "already running" etc.. If you have any ideas on how to get this working correctly please let me know , as I'm in dire straights haha.. --Josh
[Freevo-users] dxr3 and libSDL
Hi all, I have a dxr3 card that I am using in a Freevo box for a friend and have been working on the dxr3 patch for SDL. It looks like there are some PAL things hardcoded in the patch so I was wondering if there is anyone out there that is using NTSC and a dxr3 for Freevo. Thanks, Rob --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] dxr3 and libSDL
Gray, Tim wrote: yup. I simply set the dxr3 driver for NTSC and ignore everything in the patch. it works fine even with the PAL stuff in the patch. That's good to hear. Last night I did some work porting the patch to SDL12 cvs and last ffmpeg release (0.4.8). I had to change a few things to get it to build but haven't had a chance to test it. Tim, in order to save me some time can you tell me how your dxr3 modules are configured? Modprobe options and such. Thanks! -Rob -Original Message- From: Rob Shortt [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 11:46 AM To: [EMAIL PROTECTED] Subject: [Freevo-users] dxr3 and libSDL Hi all, I have a dxr3 card that I am using in a Freevo box for a friend and have been working on the dxr3 patch for SDL. It looks like there are some PAL things hardcoded in the patch so I was wondering if there is anyone out there that is using NTSC and a dxr3 for Freevo. Thanks, Rob --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] dxr3 and libSDL
yup. I simply set the dxr3 driver for NTSC and ignore everything in the patch. it works fine even with the PAL stuff in the patch. -Original Message- From: Rob Shortt [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 11:46 AM To: [EMAIL PROTECTED] Subject: [Freevo-users] dxr3 and libSDL Hi all, I have a dxr3 card that I am using in a Freevo box for a friend and have been working on the dxr3 patch for SDL. It looks like there are some PAL things hardcoded in the patch so I was wondering if there is anyone out there that is using NTSC and a dxr3 for Freevo. Thanks, Rob --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] dxr3 and libSDL
I sure can, the freevo machine I have that on is at home so I'll email you with that info ASAP. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Rob Shortt Sent: Tuesday, January 13, 2004 11:56 AM To: [EMAIL PROTECTED] Subject: Re: [Freevo-users] dxr3 and libSDL Gray, Tim wrote: yup. I simply set the dxr3 driver for NTSC and ignore everything in the patch. it works fine even with the PAL stuff in the patch. That's good to hear. Last night I did some work porting the patch to SDL12 cvs and last ffmpeg release (0.4.8). I had to change a few things to get it to build but haven't had a chance to test it. Tim, in order to save me some time can you tell me how your dxr3 modules are configured? Modprobe options and such. Thanks! -Rob -Original Message- From: Rob Shortt [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 11:46 AM To: [EMAIL PROTECTED] Subject: [Freevo-users] dxr3 and libSDL Hi all, I have a dxr3 card that I am using in a Freevo box for a friend and have been working on the dxr3 patch for SDL. It looks like there are some PAL things hardcoded in the patch so I was wondering if there is anyone out there that is using NTSC and a dxr3 for Freevo. Thanks, Rob --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] recording..
Just wanted to say that it doesn't seem to record at all , even if i Try to record manually.. any ideas?? still no sign of record_daemon.py or whatever either.. =\ - Original Message - From: Bikr To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 10:52 AM Subject: [Freevo-users] recording daemon py?? Hello.. I've been trying to get freevo 100% setup for some time now. I finally got it working with my 36" VGA monitor. The monitor only runs 640 x 480 , the guide is still a little off centered but everything else is good now , just can't see the channel numbers etc... I am having trouble following the docs on recording though.. I have setup freevo , and it works , I goto the guide and hit f6 on a program , it tells me that it is scheduled to be recorded , and the webfront says that it is recording it , however , it never gets recorded.. I have my record directory set to /media/tv and nothing ever shows up , It freely lets me pick other channels even though it shouldn't so that it can record etc.. The docs all mention entering a cron to run recorddaemon.py or something but that file doesn't exist in my /src/tv directory.. Is this a new thing some new way of doing it , I have the recordserver running constantly as well using /usr/local/freevo/freevo recordserver and i verify that it's running by issuing /usr/local/freevo/freevo recordserver and it responds with "already running" etc.. If you have any ideas on how to get this working correctly please let me know , as I'm in dire straights haha.. --Josh
Re: [Freevo-users] recording..
Hi, record_daemon which used to be run from cron is depricated, as are the docs you are reading (which should be updated). It sounds as if your recordserver is running so please look into the logs to see what is happening, it is most likely that your VCR_CMD is failing. You should find your logs in /var/log/freevo/ or /tmp/freevo/ if that doesn't exist. -Rob Bikr wrote: Just wanted to say that it doesn't seem to record at all , even if i Try to record manually.. any ideas?? still no sign of record_daemon.py or whatever either.. =\ - Original Message - *From:* Bikr mailto:[EMAIL PROTECTED] *To:* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] *Sent:* Tuesday, January 13, 2004 10:52 AM *Subject:* [Freevo-users] recording daemon py?? Hello.. I've been trying to get freevo 100% setup for some time now. I finally got it working with my 36 VGA monitor. The monitor only runs 640 x 480 , the guide is still a little off centered but everything else is good now , just can't see the channel numbers etc... I am having trouble following the docs on recording though.. I have setup freevo , and it works , I goto the guide and hit f6 on a program , it tells me that it is scheduled to be recorded , and the webfront says that it is recording it , however , it never gets recorded.. I have my record directory set to /media/tvand nothing ever shows up , It freely lets me pick other channels even though it shouldn't so that it can record etc.. The docs all mention entering a cron to run recorddaemon.py or something but that file doesn't exist in my /src/tv directory.. Is this a new thing some new way of doing it , I have the recordserver running constantly as well using /usr/local/freevo/freevo recordserver and i verify that it's running by issuing /usr/local/freevo/freevo recordserver and it responds with already running etc.. If you have any ideas on how to get this working correctly please let me know , as I'm in dire straights haha.. --Josh --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
Rob: and others here is the log file for a recording I just tried to do , it should have recorded from 11:30 - 12:00 It did nothing.. although it showed as recording from the web front.. 2004/01/13 11:21 EST [*RecordServer*] twisted.web.server.Site starting on 18001 2004/01/13 11:21 EST [*RecordServer*] Starting factory twisted.web.server.Site instance at 0x41a155cc 2004/01/13 11:24 EST [HTTPChannel,0,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:24:48 +] POST / HTTP/1.0 200 230 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:24 EST [HTTPChannel,1,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:24:49 +] POST / HTTP/1.0 200 628 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:25 EST [HTTPChannel,2,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:25:04 +] POST / HTTP/1.0 200 628 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:25 EST [HTTPChannel,3,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:25:30 +] POST / HTTP/1.0 200 230 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:25 EST [HTTPChannel,4,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:25:30 +] POST / HTTP/1.0 200 1039 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:25 EST [HTTPChannel,5,127.0.0.1] addProgram: key is C58spiketv.zap2it.com:1074011400.0 2004/01/13 11:25 EST [HTTPChannel,5,127.0.0.1] addProgram: actually adding 2004-01-13 11:30 to 2004-01-13 12:00 C58spiketv.zap2it.com Real TV 2004/01/13 11:25 EST [HTTPChannel,5,127.0.0.1] addProgram: len is 1 2004/01/13 11:25 EST [HTTPChannel,5,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:25:30 +] POST / HTTP/1.0 200 251 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:25 EST [HTTPChannel,6,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:25:30 +] POST / HTTP/1.0 200 1613 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:25 EST [HTTPChannel,7,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:25:30 +] POST / HTTP/1.0 200 264 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:25 EST [HTTPChannel,8,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:25:30 +] POST / HTTP/1.0 200 243 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:25 EST [HTTPChannel,9,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:25:35 +] POST / HTTP/1.0 200 230 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:25 EST [HTTPChannel,10,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:25:35 +] POST / HTTP/1.0 200 1613 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:29 EST [HTTPChannel,11,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:29:43 +] POST / HTTP/1.0 200 230 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:29 EST [HTTPChannel,12,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:29:43 +] POST / HTTP/1.0 200 1613 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:29 EST [HTTPChannel,13,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:29:56 +] POST / HTTP/1.0 200 230 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:29 EST [HTTPChannel,14,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:29:56 +] POST / HTTP/1.0 200 1613 - xmlrpclib.py/1.0.1 (by www.pythonware.com) 2004/01/13 11:30 EST [*RecordServer*] Recorder::Record: /usr/bin/mencoder -tv on:driver=v4l:input=0:norm=NTSC:channel=58:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/01-13_11:30_Real_TV_-_.avi 2004/01/13 11:30 EST [*RecordServer*] Record_Thread::run: mode=record 2004/01/13 11:30 EST [*RecordServer*] Record_Thread::run: cmd=/usr/bin/mencoder -tv on:driver=v4l:input=0:norm=NTSC:channel=58:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/01-13_11:30_Real_TV_-_.avi 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER GOT EVENT NOTICE 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER HANDLING EVENT 2004/01/13 11:30 EST [*RecordServer*] popen ./runtime/runapp /usr/bin/mencoder -tv on:driver=v4l:input=0:norm=NTSC:channel=58:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/01-13_11:30_Real_TV_-_.avi 2004/01/13 11:30 EST [*RecordServer*] Record_Thread::run: past wait()!! 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER GOT EVENT NOTICE 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER GOT EVENT NOTICE 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER HANDLING EVENT 2004/01/13 11:30 EST [*RecordServer*] killing pid 5357 with sig 15 2004/01/13 11:30 EST [*RecordServer*] recorderver: After wait() 2004/01/13
Re: [Freevo-users] recording..
Time to record... 2004/01/13 11:30 EST [*RecordServer*] Recorder::Record: /usr/bin/mencoder -tv on:driver=v4l:input=0:norm=NTSC:channel=58:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/01-13_11:30_Real_TV_-_.avi 2004/01/13 11:30 EST [*RecordServer*] Record_Thread::run: mode=record 2004/01/13 11:30 EST [*RecordServer*] Record_Thread::run: cmd=/usr/bin/mencoder -tv on:driver=v4l:input=0:norm=NTSC:channel=58:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/01-13_11:30_Real_TV_-_.avi 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER GOT EVENT NOTICE 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER HANDLING EVENT The main thread of recordserver starts the recording command... 2004/01/13 11:30 EST [*RecordServer*] popen ./runtime/runapp /usr/bin/mencoder -tv on:driver=v4l:input=0:norm=NTSC:channel=58:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/01-13_11:30_Real_TV_-_.avi 2004/01/13 11:30 EST [*RecordServer*] Record_Thread::run: past wait()!! This past wait message indicates that the recording command exited. This is still at 11:30 so something is wrong with your VCR_CMD. Try to run it on your command line: /usr/bin/mencoder -tv on:driver=v4l:input=0:norm=NTSC:channel=58:chanlist=us-cable:width=320:height=240:outfmt=yv12: device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/01-13_11:30_Real_TV_-_.avi With fixed line wrapping of course. I am willing to bet your mencoder command is new enough to need tv:// -tv instead of -tv on: so try removing the on: and adding tv:// -Rob --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
On Tue, 13 Jan 2004, Bikr wrote: Rob: and others here is the log file for a recording I just tried to do , it should have recorded from 11:30 - 12:00 It did nothing.. although it showed as recording from the web front.. snip As far as I can tell, the web front merely looks at the schedule to see if it's recording - it doesn't actually check to see if it's actually being recorded. The error you're seeing below is the same one I had when my mencoder command was incorrect. If I was you, I'd take the mencoder command as it shows up in the log and try to run it manually from the command line. Fix the errors that show up until you do get a clean recording; then, make the appropriate changes in local_conf.py. ---Patrick M [EMAIL PROTECTED]:3784715-- You know, this is how the sum total of human knowledge is increased. Not with idle speculation and meaningless chatter, but with a medium-sized hammer and some free time. - [EMAIL PROTECTED], a.f.c-a --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
If I formed that command propery then it looks like the error is telling me that I don't have mplayer configured properly , ie;; codecs.conf isn't there and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is the results of the command.. =\ bash-2.05b# /usr/bin/mencoder -tv on:driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/0-13_11:30_Real_TV_-_.avi MEncoder 1.0pre3-3.2.2 (C) 2000-2003 MPlayer Team CPU: Advanced Micro Devices Duron MG Morgan 1103 MHz (Family: 6, Stepping: 0) Detected cache-line size is 64 bytes CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 Compiled with Runtime CPU Detection - WARNING - this is not optimal! To get best performance, recompile MPlayer with --disable-runtime-cpudetection. Reading file://.mplayer/codecs.conf: Can't open '//.mplayer/codecs.conf': No such file or directory Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No such file or directory Using built-in default codecs.conf. File not found: 'frameno.avi' Failed to open frameno.avi Reading config file file://.mplayer/mencoder: No such file or directory -tv on is deprecated, use tv:// instead Exiting... (error parsing cmdline) bash-2.05b# --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] freevo epia-V xine problem
Hello, I'am running freevo on my epia-V1000 for a few weeks now with ups and downs. whatever I do I can't play dvd's smoothly (xine) and recording with mencoder/libavcodec_mpeg4 is imposible (99% cpu and 17fps). I know this isn't freevo related, but maybe there's another epia-V user who can help me, I'am really stuck. I'am using LFS-5.0, kernel-2.4.23-epia1+xfs, 512Mb. ram, latest xine and mplayer/mencoder and the kernels bttv driver card=24 -- Groetjes Japie --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
On Tue, 13 Jan 2004, Bikr wrote: If I formed that command propery then it looks like the error is telling me that I don't have mplayer configured properly , ie;; codecs.conf isn't there and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is the results of the command.. =\ Ignore that stuff. It's informative, nothing more. This is the important line: -tv on is deprecated, use tv:// instead Exiting... (error parsing cmdline) I had the same problem. Change the options line after -tv. Take out the 'on:'. Then, at then end of your command line, enter a tv://. That should clear it up. ---Patrick M [EMAIL PROTECTED]:3784715-- You know, this is how the sum total of human knowledge is increased. Not with idle speculation and meaningless chatter, but with a medium-sized hammer and some free time. - [EMAIL PROTECTED], a.f.c-a --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
woot , there it is , from command line , now let me try to figure out how to edit it local_conf.pyIf you get this before I do , let me know how to do it , if not , then thanks annyway hahah.. I'll respond when I get it working.. =)---Josh - Original Message - From: Patrick M Geahan [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 1:17 PM Subject: Re: [Freevo-users] recording.. On Tue, 13 Jan 2004, Bikr wrote: If I formed that command propery then it looks like the error is telling me that I don't have mplayer configured properly , ie;; codecs.conf isn't there and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is the results of the command.. =\ Ignore that stuff. It's informative, nothing more. This is the important line: -tv on is deprecated, use tv:// instead Exiting... (error parsing cmdline) I had the same problem. Change the options line after -tv. Take out the 'on:'. Then, at then end of your command line, enter a tv://. That should clear it up. ---Patrick M [EMAIL PROTECTED]:3784715-- You know, this is how the sum total of human knowledge is increased. Not with idle speculation and meaningless chatter, but with a medium-sized hammer and some free time. - [EMAIL PROTECTED], a.f.c-a --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
ahah I think I got it , went to the vcr section of course , toko out the on from -tv then went down to the filename section and removed the right paren , and made a new line under that containing this 'tv:// ') hopefully that'll do it =) let's see.. --Josh - Original Message - From: Bikr [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 1:24 PM Subject: Re: [Freevo-users] recording.. woot , there it is , from command line , now let me try to figure out how to edit it local_conf.pyIf you get this before I do , let me know how to do it , if not , then thanks annyway hahah.. I'll respond when I get it working.. =)---Josh - Original Message - From: Patrick M Geahan [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 1:17 PM Subject: Re: [Freevo-users] recording.. On Tue, 13 Jan 2004, Bikr wrote: If I formed that command propery then it looks like the error is telling me that I don't have mplayer configured properly , ie;; codecs.conf isn't there and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is the results of the command.. =\ Ignore that stuff. It's informative, nothing more. This is the important line: -tv on is deprecated, use tv:// instead Exiting... (error parsing cmdline) I had the same problem. Change the options line after -tv. Take out the 'on:'. Then, at then end of your command line, enter a tv://. That should clear it up. ---Patrick M [EMAIL PROTECTED]:3784715-- You know, this is how the sum total of human knowledge is increased. Not with idle speculation and meaningless chatter, but with a medium-sized hammer and some free time. - [EMAIL PROTECTED], a.f.c-a --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] Install problems (Debian)
I'm trying to install based on: http://freevo.sourceforge.net/install.html#Installation --- Quick install The first and easy way is to use our installer. Yust run the following line in a terminal: lynx http://freevo.sf.net/install.sh -dump | bash --- Ok, here goes: +++ lynx http://freevo.sf.net/install.sh -dump | bash Looking up freevo.sf.net freevo.sf.net Making HTTP connection to freevo.sf.net Sending HTTP request. HTTP request sent; waiting for response. HTTP/1.1 302 Found Data transfer complete HTTP/1.1 302 Found Looking up freevo.sourceforge.net freevo.sourceforge.net Making HTTP connection to freevo.sourceforge.net Sending HTTP request. HTTP request sent; waiting for response. HTTP/1.1 200 OK Data transfer complete lynx: Start file could not be found or is not text/html or text/plain Exiting... +++ Hmmm... Ok, how about: --- Debian A Debian apt source is available and includes all the dependencies you'll need. You should add this to your /etc/apt/sources.list file: deb http://freevo.sourceforge.net/debian unstable main deb http://marillat.free.fr/ unstable main --- +++ apt-get update snip Get:6 http://http.us.debian.org unstable/contrib Release [85B] Get:7 http://http.us.debian.org unstable/non-free Packages [68.6kB] Get:8 http://http.us.debian.org unstable/non-free Release [86B] Fetched 3066kB in 7s (387kB/s) Failed to fetch http://marillat.free.fr/dists/unstable/main/binary-i386/Packages 404 Not Found [IP: 212.27.35.1 80] Reading Package Lists... Done Building Dependency Tree... Done snip +++ --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Install problems (Debian)
Daniel Webb wrote: Daniel, the mallrat debs have moved to: deb http://hpisi.nerim.net/ unstable main HTH, -Rob Debian A Debian apt source is available and includes all the dependencies you'll need. You should add this to your /etc/apt/sources.list file: deb http://freevo.sourceforge.net/debian unstable main deb http://marillat.free.fr/ unstable main --- +++ apt-get update snip Get:6 http://http.us.debian.org unstable/contrib Release [85B] Get:7 http://http.us.debian.org unstable/non-free Packages [68.6kB] Get:8 http://http.us.debian.org unstable/non-free Release [86B] Fetched 3066kB in 7s (387kB/s) Failed to fetch http://marillat.free.fr/dists/unstable/main/binary-i386/Packages 404 Not Found [IP: 212.27.35.1 80] --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
Ok , Now , new problem , recordings are starting , and when I grab the .avi files , they are just static and the green screen that my video always shows when there is no signal to it , however , there should be good signal , does freevo need to be running , the front end I mean , for it to record actual video , or did I maybe miss a step? - Original Message - From: Patrick M Geahan [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 1:17 PM Subject: Re: [Freevo-users] recording.. On Tue, 13 Jan 2004, Bikr wrote: If I formed that command propery then it looks like the error is telling me that I don't have mplayer configured properly , ie;; codecs.conf isn't there and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is the results of the command.. =\ Ignore that stuff. It's informative, nothing more. This is the important line: -tv on is deprecated, use tv:// instead Exiting... (error parsing cmdline) I had the same problem. Change the options line after -tv. Take out the 'on:'. Then, at then end of your command line, enter a tv://. That should clear it up. ---Patrick M [EMAIL PROTECTED]:3784715-- You know, this is how the sum total of human knowledge is increased. Not with idle speculation and meaningless chatter, but with a medium-sized hammer and some free time. - [EMAIL PROTECTED], a.f.c-a --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] recording..
Have a look at the command line freevo is using to kick off the recording. Sounds like you're not specifying :input=# or something similar on your command line. If you're using mencoder to record, its completely separate from freevo - ie, freevo shouldn't need to be running. What I found easiest, was to take freevo's command line, and play with it until it recorded fine, then take those changes and make them to VCR_CMD in local_config.py Cheers Dave Smylie -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bikr Sent: Wednesday, 14 January 2004 7:56 a.m. To: [EMAIL PROTECTED] Subject: Re: [Freevo-users] recording.. Importance: High Ok , Now , new problem , recordings are starting , and when I grab the .avi files , they are just static and the green screen that my video always shows when there is no signal to it , however , there should be good signal , does freevo need to be running , the front end I mean , for it to record actual video , or did I maybe miss a step? - Original Message - From: Patrick M Geahan [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 1:17 PM Subject: Re: [Freevo-users] recording.. On Tue, 13 Jan 2004, Bikr wrote: If I formed that command propery then it looks like the error is telling me that I don't have mplayer configured properly , ie;; codecs.conf isn't there and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is the results of the command.. =\ Ignore that stuff. It's informative, nothing more. This is the important line: -tv on is deprecated, use tv:// instead Exiting... (error parsing cmdline) I had the same problem. Change the options line after -tv. Take out the 'on:'. Then, at then end of your command line, enter a tv://. That should clear it up. ---Patrick M [EMAIL PROTECTED]:3784715-- You know, this is how the sum total of human knowledge is increased. Not with idle speculation and meaningless chatter, but with a medium-sized hammer and some free time. - [EMAIL PROTECTED], a.f.c-a --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.558 / Virus Database: 350 - Release Date: 2/01/2004 --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
It starts recording ok and i'm using input as /dev/video0 if i set it to video1 or any other video* that is in /dev , it doesnt' do anything at all just doesn't run , video0 runs but it is all static that is recording. When I watch tv @ the box though with freevo , i get a picture.. my command line is this.. bash-2.05b# /usr/bin/mencoder -tv :driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/0-13_11:30_Real_TV_-_.avi tv:// - Original Message - From: Dave Smylie [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 6:49 PM Subject: RE: [Freevo-users] recording.. Have a look at the command line freevo is using to kick off the recording. Sounds like you're not specifying :input=# or something similar on your command line. If you're using mencoder to record, its completely separate from freevo - ie, freevo shouldn't need to be running. What I found easiest, was to take freevo's command line, and play with it until it recorded fine, then take those changes and make them to VCR_CMD in local_config.py Cheers Dave Smylie -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bikr Sent: Wednesday, 14 January 2004 7:56 a.m. To: [EMAIL PROTECTED] Subject: Re: [Freevo-users] recording.. Importance: High Ok , Now , new problem , recordings are starting , and when I grab the .avi files , they are just static and the green screen that my video always shows when there is no signal to it , however , there should be good signal , does freevo need to be running , the front end I mean , for it to record actual video , or did I maybe miss a step? - Original Message - From: Patrick M Geahan [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 1:17 PM Subject: Re: [Freevo-users] recording.. On Tue, 13 Jan 2004, Bikr wrote: If I formed that command propery then it looks like the error is telling me that I don't have mplayer configured properly , ie;; codecs.conf isn't there and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is the results of the command.. =\ Ignore that stuff. It's informative, nothing more. This is the important line: -tv on is deprecated, use tv:// instead Exiting... (error parsing cmdline) I had the same problem. Change the options line after -tv. Take out the 'on:'. Then, at then end of your command line, enter a tv://. That should clear it up. ---Patrick M [EMAIL PROTECTED]:3784715-- You know, this is how the sum total of human knowledge is increased. Not with idle speculation and meaningless chatter, but with a medium-sized hammer and some free time. - [EMAIL PROTECTED], a.f.c-a --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.558 / Virus Database: 350 - Release Date: 2/01/2004 --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___
Re: [Freevo-users] recording..
I also just tried with input 1 instead of 0 input 1 gives me blue screen , as it appears to be the rca in on the card. . 0 I'm sure is probably the correct one , but for some reason , it's not getting the signal from the card , could it be tuning in to the wrong frequency for the channels? I tried a few channels and none of them seem to work .. --Josh - Original Message - From: Bikr [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 7:23 PM Subject: Re: [Freevo-users] recording.. It starts recording ok and i'm using input as /dev/video0 if i set it to video1 or any other video* that is in /dev , it doesnt' do anything at all just doesn't run , video0 runs but it is all static that is recording. When I watch tv @ the box though with freevo , i get a picture.. my command line is this.. bash-2.05b# /usr/bin/mencoder -tv :driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/0-13_11:30_Real_TV_-_.avi tv:// - Original Message - From: Dave Smylie [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 6:49 PM Subject: RE: [Freevo-users] recording.. Have a look at the command line freevo is using to kick off the recording. Sounds like you're not specifying :input=# or something similar on your command line. If you're using mencoder to record, its completely separate from freevo - ie, freevo shouldn't need to be running. What I found easiest, was to take freevo's command line, and play with it until it recorded fine, then take those changes and make them to VCR_CMD in local_config.py Cheers Dave Smylie -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bikr Sent: Wednesday, 14 January 2004 7:56 a.m. To: [EMAIL PROTECTED] Subject: Re: [Freevo-users] recording.. Importance: High Ok , Now , new problem , recordings are starting , and when I grab the .avi files , they are just static and the green screen that my video always shows when there is no signal to it , however , there should be good signal , does freevo need to be running , the front end I mean , for it to record actual video , or did I maybe miss a step? - Original Message - From: Patrick M Geahan [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 1:17 PM Subject: Re: [Freevo-users] recording.. On Tue, 13 Jan 2004, Bikr wrote: If I formed that command propery then it looks like the error is telling me that I don't have mplayer configured properly , ie;; codecs.conf isn't there and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is the results of the command.. =\ Ignore that stuff. It's informative, nothing more. This is the important line: -tv on is deprecated, use tv:// instead Exiting... (error parsing cmdline) I had the same problem. Change the options line after -tv. Take out the 'on:'. Then, at then end of your command line, enter a tv://. That should clear it up. ---Patrick M [EMAIL PROTECTED]:3784715-- You know, this is how the sum total of human knowledge is increased. Not with idle speculation and meaningless chatter, but with a medium-sized hammer and some free time. - [EMAIL PROTECTED], a.f.c-a --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.558 / Virus Database: 350 - Release Date: 2/01/2004 --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced
