Re: [Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti
Sure, I've attached a copy of my XFree86 to this message. Note that I use Screen0 by default when I boot into X. I use the screen tvout when booting into Freevo via a run level 4 configuration. Both configurations work fine with my TV through the SVIDEO port. The only reason I have the two screens is that I have been attempting to get a little better quality by having a specific tv configuration. As you will see, I haven't done much with it yet. As for the root of the problem, I think I cause the error by having: Option "TVStandard" "NTSC" Rather than: Option "TVStandard" "NTSC-M" One last note, I am running RH9. Not sure if that matters or not, but I thought I'd mention it. -Davin - Original Message - From: "Taylor Dondich" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, July 02, 2003 11:39 AM Subject: Re: [Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti > Is there any chance you can send me a copy of your XFree86 config when > you have a chance? It'd really help to have a reference. > > Thanks, > > Taylor > > > Davin Desborough wrote: > > > I had the same problem. For me, it turned out that my card/driver did not > > like one of the option statements. It was either the one that set NTSC or > > the one that set the output to SVIDEO (I think this was it). Removing the > > offending option got everything up and running for me. > > > > Sorry I'm being vague, but I'm at work and don't have the config file > > available. > > > > -Davin > > ----- Original Message - > > From: "Taylor Dondich" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, July 01, 2003 5:43 PM > > Subject: [Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti > > > > > > > >>I have RedHat 8.0, with an Nvidia Geforce 4ti. When RedHat installed, > >>it used it's vesa driver, with 16-bit graphics at 800x600 and displayed > >>fine on my television (A Sony 27-inch trinitron). I am trying to > >>install the accelerated nvidia drivers from nvidia's site. I am using > >>the latest drivers. The driver supposedly installs fine. After > >>configuring my XFree86 configuration file as shown in the FreeVo > >>documentation (and also consulting nvidia's readme as well), I attempt > >>to startx and receive this error: > >> > >>(EE) NVIDIA(0): No modes remaining for display device: TV-0 > >>(EE) NVIDIA(0): *** Aborting *** > >>(EE) Screen(s) found, but none have a usable configuration. > >> > >> > >>Has anyone run into this issue? How can I troubleshoot this further? > >> > >>Taylor > >> > >> > >> > >>--- > >>This SF.Net email sponsored by: Free pre-built ASP.NET sites including > >>Data Reports, E-commerce, Portals, and Forums are available now. > >>Download today and enter to win an XBOX or Visual Studio .NET. > >>http://aspnet.click-url.com/go/psa0016ave/direct;at.asp_061203_01/01 > >>___ > >>Freevo-users mailing list > >>[EMAIL PROTECTED] > >>https://lists.sourceforge.net/lists/listinfo/freevo-users > >> > > > > > > > > > > --- > > This SF.Net email sponsored by: Free pre-built ASP.NET sites including > > Data Reports, E-commerce, Portals, and Forums are available now. > > Download today and enter to win an XBOX or Visual Studio .NET. > > http://aspnet.click-url.com/go/psa0016ave/direct;at.asp_061203_01/01 > > ___ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > -- > Taylor Dondich > Majik Networks > www.majiknetworks.com > 702-896-3470 - Office > 702-617-9613 - Fax > > XF86Config Description: Binary data
Re: [Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti
Is there any chance you can send me a copy of your XFree86 config when you have a chance? It'd really help to have a reference. Thanks, Taylor Davin Desborough wrote: I had the same problem. For me, it turned out that my card/driver did not like one of the option statements. It was either the one that set NTSC or the one that set the output to SVIDEO (I think this was it). Removing the offending option got everything up and running for me. Sorry I'm being vague, but I'm at work and don't have the config file available. -Davin - Original Message - From: "Taylor Dondich" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 01, 2003 5:43 PM Subject: [Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti I have RedHat 8.0, with an Nvidia Geforce 4ti. When RedHat installed, it used it's vesa driver, with 16-bit graphics at 800x600 and displayed fine on my television (A Sony 27-inch trinitron). I am trying to install the accelerated nvidia drivers from nvidia's site. I am using the latest drivers. The driver supposedly installs fine. After configuring my XFree86 configuration file as shown in the FreeVo documentation (and also consulting nvidia's readme as well), I attempt to startx and receive this error: (EE) NVIDIA(0): No modes remaining for display device: TV-0 (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Has anyone run into this issue? How can I troubleshoot this further? Taylor --- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa0016ave/direct;at.asp_061203_01/01 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa0016ave/direct;at.asp_061203_01/01 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users -- Taylor Dondich Majik Networks www.majiknetworks.com 702-896-3470 - Office 702-617-9613 - Fax --- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa0016ave/direct;at.asp_061203_01/01 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti
I had the same problem. For me, it turned out that my card/driver did not like one of the option statements. It was either the one that set NTSC or the one that set the output to SVIDEO (I think this was it). Removing the offending option got everything up and running for me. Sorry I'm being vague, but I'm at work and don't have the config file available. -Davin - Original Message - From: "Taylor Dondich" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 01, 2003 5:43 PM Subject: [Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti > I have RedHat 8.0, with an Nvidia Geforce 4ti. When RedHat installed, > it used it's vesa driver, with 16-bit graphics at 800x600 and displayed > fine on my television (A Sony 27-inch trinitron). I am trying to > install the accelerated nvidia drivers from nvidia's site. I am using > the latest drivers. The driver supposedly installs fine. After > configuring my XFree86 configuration file as shown in the FreeVo > documentation (and also consulting nvidia's readme as well), I attempt > to startx and receive this error: > > (EE) NVIDIA(0): No modes remaining for display device: TV-0 > (EE) NVIDIA(0): *** Aborting *** > (EE) Screen(s) found, but none have a usable configuration. > > > Has anyone run into this issue? How can I troubleshoot this further? > > Taylor > > > > --- > This SF.Net email sponsored by: Free pre-built ASP.NET sites including > Data Reports, E-commerce, Portals, and Forums are available now. > Download today and enter to win an XBOX or Visual Studio .NET. > http://aspnet.click-url.com/go/psa0016ave/direct;at.asp_061203_01/01 > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > --- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa0016ave/direct;at.asp_061203_01/01 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti
I have RedHat 8.0, with an Nvidia Geforce 4ti. When RedHat installed, it used it's vesa driver, with 16-bit graphics at 800x600 and displayed fine on my television (A Sony 27-inch trinitron). I am trying to install the accelerated nvidia drivers from nvidia's site. I am using the latest drivers. The driver supposedly installs fine. After configuring my XFree86 configuration file as shown in the FreeVo documentation (and also consulting nvidia's readme as well), I attempt to startx and receive this error: (EE) NVIDIA(0): No modes remaining for display device: TV-0 (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. Has anyone run into this issue? How can I troubleshoot this further? Taylor --- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa0016ave/direct;at.asp_061203_01/01 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users