Vs: RE: [Freevo-users] Re: Problen with newest Freevo
Hi,
Yes I know. But the monitor alone does not work either. Also Freevo 1.3.2 _works_
perfectly so something has been changed in current Freevo, which causes this.
I have both Freevo 1.3.2 and 1.3.4 installed at the same time so I can easily confirm
that 1.3.2 works and 1.3.4 does not work.
-Teemu-
> you do know that televisions can not handle resolutions that your
> monitorcan...
>
> I'm betting anything over 800X600 will not work.
>
> I have had zero luck with ATI cards under linux, I always end up
> tradingthem to someone for an nvidia card
>
>
> Hope you have better luck!
>
>
> -Original Message-
> From: Teemu Ahola [EMAIL PROTECTED]
> Sent: Friday, August 29, 2003 12:33 PM
> To: Freevo Users mailing list
> Subject: Re: [Freevo-users] Re: Problen with newest Freevo
>
>
> Hi,
>
> Still no help ;). Basically my monitor goes Power Off and if my TV
> is
> connected to my Radeon7000 SVIDEO connection, its picture goes
> disordered. It seems that video signal goes to a mode, which is not
> supported by my monitor nor my TV. Freevo 1.3.2 works OK. Also
> under
> XFree Freevo works correctly. If I export SDL_VIDEODRIVER=fbcon I
> get
> following output:
>
>
>
> WARNING: freevo_config.py was changed, please check local_config.py
>
> You are using version 3.5, changes since then:
> Version 3.6:
> Added USE_MEDIAID_TAG_NAMES as directory based variable and
> HIDE_UNUSABLE_DISCS to hide discs in the wrong menus and empty
> drives
>
>
> ROM_DRIVES: Auto-detected and added "('/mnt/cdrom',
> '/dev/cdroms/cdrom0', 'CD-1')"
> Traceback (most recent call last):
> File "./src/main.py", line 99, in ?
>skin= skin.get_singleton()
> File "./src/skin.py", line 71, in get_singleton
>exec('import skins.' + config.OSD_SKIN + '.' + config.OSD_SKIN
> + '
> as skinimpl')
> File "", line 1, in ?
> File "./src/skins/main/main.py", line 58, in ?
>import xml_skin
> File "./src/skins/main/xml_skin.py", line 57, in ?
>osd = osd.get_singleton()
> File "./src/osd.py", line 218, in get_singleton
>_singleton = util.SynchronizedObject(OSD())
> File "./src/osd.py", line 365, in __init__
>pygame.display.init()
> pygame.error: No available video device
>
>
>
> On Sun, 2003-08-24 at 16:46, Dirk Meyer wrote:
> > teemu ahola wrote:
> > > Hi,
> > >
> > > Sorry. I still does not work ;). Or maybe I did something
> wrong. I
> > > simply 'check out' files from cvs and ran './freevo setup',
> updated
> > > freevo.conf 'display = fbdev:vidix' and ran './freevo'.
> >
> > display=fbdev:vidix is not valid. Use display=fbdev and set
> > fbdev:vidix manualy as output device for mplayer. If it still
> doesn't
> > work, try export SDL_VIDEODRIVER=fbcon before starting Freevo. If
> you
> > still have problems, please mail what exactly happens.
> >
> --
> Teemu Ahola
> EMail : [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> Mobile: +358 50 5873210
>
begin:vcard
n:ahola;teemu
fn:teemu ahola
tel;cell:+358 (050) 5873210
adr:;;;Oulu;;;Finland
version:2.1
email;internet:[EMAIL PROTECTED]
end:vcard
RE: [Freevo-users] Re: Problen with newest Freevo
you do know that televisions can not handle resolutions that your monitor
can...
I'm betting anything over 800X600 will not work.
I have had zero luck with ATI cards under linux, I always end up trading
them to someone for an nvidia card
Hope you have better luck!
-Original Message-
From: Teemu Ahola [mailto:[EMAIL PROTECTED]
Sent: Friday, August 29, 2003 12:33 PM
To: Freevo Users mailing list
Subject: Re: [Freevo-users] Re: Problen with newest Freevo
Hi,
Still no help ;). Basically my monitor goes Power Off and if my TV is
connected to my Radeon7000 SVIDEO connection, its picture goes
disordered. It seems that video signal goes to a mode, which is not
supported by my monitor nor my TV. Freevo 1.3.2 works OK. Also under
XFree Freevo works correctly. If I export SDL_VIDEODRIVER=fbcon I get
following output:
WARNING: freevo_config.py was changed, please check local_config.py
You are using version 3.5, changes since then:
Version 3.6:
Added USE_MEDIAID_TAG_NAMES as directory based variable and
HIDE_UNUSABLE_DISCS to hide discs in the wrong menus and empty
drives
ROM_DRIVES: Auto-detected and added "('/mnt/cdrom',
'/dev/cdroms/cdrom0', 'CD-1')"
Traceback (most recent call last):
File "./src/main.py", line 99, in ?
skin= skin.get_singleton()
File "./src/skin.py", line 71, in get_singleton
exec('import skins.' + config.OSD_SKIN + '.' + config.OSD_SKIN + '
as skinimpl')
File "", line 1, in ?
File "./src/skins/main/main.py", line 58, in ?
import xml_skin
File "./src/skins/main/xml_skin.py", line 57, in ?
osd = osd.get_singleton()
File "./src/osd.py", line 218, in get_singleton
_singleton = util.SynchronizedObject(OSD())
File "./src/osd.py", line 365, in __init__
pygame.display.init()
pygame.error: No available video device
On Sun, 2003-08-24 at 16:46, Dirk Meyer wrote:
> teemu ahola wrote:
> > Hi,
> >
> > Sorry. I still does not work ;). Or maybe I did something wrong. I
> > simply 'check out' files from cvs and ran './freevo setup', updated
> > freevo.conf 'display = fbdev:vidix' and ran './freevo'.
>
> display=fbdev:vidix is not valid. Use display=fbdev and set
> fbdev:vidix manualy as output device for mplayer. If it still doesn't
> work, try export SDL_VIDEODRIVER=fbcon before starting Freevo. If you
> still have problems, please mail what exactly happens.
>
--
Teemu Ahola
EMail : [EMAIL PROTECTED]
[EMAIL PROTECTED]
Mobile: +358 50 5873210
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
___
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
___
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Re: Problen with newest Freevo
Hi,
Still no help ;). Basically my monitor goes Power Off and if my TV is
connected to my Radeon7000 SVIDEO connection, its picture goes
disordered. It seems that video signal goes to a mode, which is not
supported by my monitor nor my TV. Freevo 1.3.2 works OK. Also under
XFree Freevo works correctly. If I export SDL_VIDEODRIVER=fbcon I get
following output:
WARNING: freevo_config.py was changed, please check local_config.py
You are using version 3.5, changes since then:
Version 3.6:
Added USE_MEDIAID_TAG_NAMES as directory based variable and
HIDE_UNUSABLE_DISCS to hide discs in the wrong menus and empty
drives
ROM_DRIVES: Auto-detected and added "('/mnt/cdrom',
'/dev/cdroms/cdrom0', 'CD-1')"
Traceback (most recent call last):
File "./src/main.py", line 99, in ?
skin= skin.get_singleton()
File "./src/skin.py", line 71, in get_singleton
exec('import skins.' + config.OSD_SKIN + '.' + config.OSD_SKIN + '
as skinimpl')
File "", line 1, in ?
File "./src/skins/main/main.py", line 58, in ?
import xml_skin
File "./src/skins/main/xml_skin.py", line 57, in ?
osd = osd.get_singleton()
File "./src/osd.py", line 218, in get_singleton
_singleton = util.SynchronizedObject(OSD())
File "./src/osd.py", line 365, in __init__
pygame.display.init()
pygame.error: No available video device
On Sun, 2003-08-24 at 16:46, Dirk Meyer wrote:
> teemu ahola wrote:
> > Hi,
> >
> > Sorry. I still does not work ;). Or maybe I did something wrong. I
> > simply 'check out' files from cvs and ran './freevo setup', updated
> > freevo.conf 'display = fbdev:vidix' and ran './freevo'.
>
> display=fbdev:vidix is not valid. Use display=fbdev and set
> fbdev:vidix manualy as output device for mplayer. If it still doesn't
> work, try export SDL_VIDEODRIVER=fbcon before starting Freevo. If you
> still have problems, please mail what exactly happens.
>
--
Teemu Ahola
EMail : [EMAIL PROTECTED]
[EMAIL PROTECTED]
Mobile: +358 50 5873210
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
___
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Re: Problen with newest Freevo
Hi,
Still no help ;). Basically my monitor goes Power Off and if my TV is
connected to my Radeon7000 SVIDEO connection, its picture goes
disordered. It seems that video signal goes to a mode, which is not
supported by my monitor nor my TV. Freevo 1.3.2 works OK. Also under
XFree Freevo works correctly. If I export SDL_VIDEODRIVER=fbcon I get
following output:
WARNING: freevo_config.py was changed, please check local_config.py
You are using version 3.5, changes since then:
Version 3.6:
Added USE_MEDIAID_TAG_NAMES as directory based variable and
HIDE_UNUSABLE_DISCS to hide discs in the wrong menus and empty
drives
ROM_DRIVES: Auto-detected and added "('/mnt/cdrom',
'/dev/cdroms/cdrom0', 'CD-1')"
Traceback (most recent call last):
File "./src/main.py", line 99, in ?
skin= skin.get_singleton()
File "./src/skin.py", line 71, in get_singleton
exec('import skins.' + config.OSD_SKIN + '.' + config.OSD_SKIN + '
as skinimpl')
File "", line 1, in ?
File "./src/skins/main/main.py", line 58, in ?
import xml_skin
File "./src/skins/main/xml_skin.py", line 57, in ?
osd = osd.get_singleton()
File "./src/osd.py", line 218, in get_singleton
_singleton = util.SynchronizedObject(OSD())
File "./src/osd.py", line 365, in __init__
pygame.display.init()
pygame.error: No available video device
On Sun, 2003-08-24 at 16:46, Dirk Meyer wrote:
> teemu ahola wrote:
> > Hi,
> >
> > Sorry. I still does not work ;). Or maybe I did something wrong. I
> > simply 'check out' files from cvs and ran './freevo setup', updated
> > freevo.conf 'display = fbdev:vidix' and ran './freevo'.
>
> display=fbdev:vidix is not valid. Use display=fbdev and set
> fbdev:vidix manualy as output device for mplayer. If it still doesn't
> work, try export SDL_VIDEODRIVER=fbcon before starting Freevo. If you
> still have problems, please mail what exactly happens.
>
>
> Dischi
>
> --
> Half of the troubles of this life can be traced to saying yes too
> quickly and not saying no soon enough. - Josh Billings
>
>
> ---
> This SF.net email is sponsored by: VM Ware
> With VMware you can run multiple operating systems on a single machine.
> WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines
> at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0
> ___
> Freevo-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
--
Teemu Ahola
EMail : [EMAIL PROTECTED]
[EMAIL PROTECTED]
Mobile: +358 50 5873210
---
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines
at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0
___
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] Re: Problen with newest Freevo
teemu ahola wrote: > Hi, > > Sorry. I still does not work ;). Or maybe I did something wrong. I > simply 'check out' files from cvs and ran './freevo setup', updated > freevo.conf 'display = fbdev:vidix' and ran './freevo'. display=fbdev:vidix is not valid. Use display=fbdev and set fbdev:vidix manualy as output device for mplayer. If it still doesn't work, try export SDL_VIDEODRIVER=fbcon before starting Freevo. If you still have problems, please mail what exactly happens. Dischi -- Half of the troubles of this life can be traced to saying yes too quickly and not saying no soon enough. - Josh Billings --- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Vs: [Freevo-users] Re: Problen with newest Freevo
Hi, Sorry. I still does not work ;). Or maybe I did something wrong. I simply 'check out' files from cvs and ran './freevo setup', updated freevo.conf 'display = fbdev:vidix' and ran './freevo'. -Teemu- > teemu ahola wrote: > > Hi, > > > > I know that the setup is from freevo.conf. But for some reason it > > does not work with Freevo 1.3.4 but it does work with Freevo 1.3.2. > > Try cvs please, I made some changes in the pygame init code. It should > work now. > > > Dischi begin:vcard n:ahola;teemu fn:teemu ahola tel;cell:+358 (050) 5873210 adr:;;;Oulu;;;Finland version:2.1 email;internet:[EMAIL PROTECTED] end:vcard
[Freevo-users] Re: Problen with newest Freevo
teemu ahola wrote: > Hi, > > I know that the setup is from freevo.conf. But for some reason it > does not work with Freevo 1.3.4 but it does work with Freevo 1.3.2. Try cvs please, I made some changes in the pygame init code. It should work now. Dischi -- Drinking coffee for instant relaxation? That's like drinking alcohol for instant motor skills. -- Marc Price --- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Vs: [Freevo-users] Re: Problen with newest Freevo
Hi, I know that the setup is from freevo.conf. But for some reason it does not work with Freevo 1.3.4 but it does work with Freevo 1.3.2. -Teemu- - Alkuperäinen viesti - Lähettäjä: Dirk Meyer <[EMAIL PROTECTED]> Päivämäärä: Keskiviikko, Elokuu 20, 2003 11:29 am Otsikko: [Freevo-users] Re: Problen with newest Freevo > teemu ahola wrote: > > Hi, > > > > So far I have managed to found out that the screen goes blanc > because of the line 340 on file osd.py. There is following line: > > > > self.screen = pygame.display.set_mode((self.width, self.height), > self.hw, self.depth) > > > > For some reason this causes the screen go to a mode, which is not > > supported by my display nor my TV. I printed 'self.width' and > > 'self.height' and they were 1024 and 768 which are correct value. > > > > Does anyone known what goes wrong and is there anything I can do > > about it. I am not python programmed but I can try to help with > > debugging. Freevo 1.3.2 works correctly. > > It's in freevo.conf generated by calling 'freevo setup' > > > Dischi > > -- > Five exclamation marks, the sure sign of an insane mind. >-- (Terry Pratchett, Reaper Man) > begin:vcard n:ahola;teemu fn:teemu ahola tel;cell:+358 (050) 5873210 adr:;;;Oulu;;;Finland version:2.1 email;internet:[EMAIL PROTECTED] end:vcard
[Freevo-users] Re: Problen with newest Freevo
teemu ahola wrote: > Hi, > > So far I have managed to found out that the screen goes blanc because of the line > 340 on file osd.py. There is following line: > > self.screen = pygame.display.set_mode((self.width, self.height), self.hw, self.depth) > > For some reason this causes the screen go to a mode, which is not > supported by my display nor my TV. I printed 'self.width' and > 'self.height' and they were 1024 and 768 which are correct value. > > Does anyone known what goes wrong and is there anything I can do > about it. I am not python programmed but I can try to help with > debugging. Freevo 1.3.2 works correctly. It's in freevo.conf generated by calling 'freevo setup' Dischi -- Five exclamation marks, the sure sign of an insane mind. -- (Terry Pratchett, Reaper Man) --- This SF.net email is sponsored by Dice.com. Did you know that Dice has over 25,000 tech jobs available today? From careers in IT to Engineering to Tech Sales, Dice has tech jobs from the best hiring companies. http://www.dice.com/index.epl?rel_code=104 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] Re: Problen with newest Freevo
Hi, So far I have managed to found out that the screen goes blanc because of the line 340 on file osd.py. There is following line: self.screen = pygame.display.set_mode((self.width, self.height), self.hw, self.depth) For some reason this causes the screen go to a mode, which is not supported by my display nor my TV. I printed 'self.width' and 'self.height' and they were 1024 and 768 which are correct value. Does anyone known what goes wrong and is there anything I can do about it. I am not python programmed but I can try to help with debugging. Freevo 1.3.2 works correctly. -Teemu- begin:vcard n:ahola;teemu fn:teemu ahola tel;cell:+358 (050) 5873210 adr:;;;Oulu;;;Finland version:2.1 email;internet:[EMAIL PROTECTED] end:vcard
