Hi, Yes I know. But the monitor alone does not work either. Also Freevo 1.3.2 _works_ perfectly so something has been changed in current Freevo, which causes this.
I have both Freevo 1.3.2 and 1.3.4 installed at the same time so I can easily confirm that 1.3.2 works and 1.3.4 does not work. -Teemu- > you do know that televisions can not handle resolutions that your > monitorcan... > > I'm betting anything over 800X600 will not work. > > I have had zero luck with ATI cards under linux, I always end up > tradingthem to someone for an nvidia card.... > > > Hope you have better luck! > > > -----Original Message----- > From: Teemu Ahola [EMAIL PROTECTED] > Sent: Friday, August 29, 2003 12:33 PM > To: Freevo Users mailing list > Subject: Re: [Freevo-users] Re: Problen with newest Freevo > > > Hi, > > Still no help ;). Basically my monitor goes Power Off and if my TV > is > connected to my Radeon7000 SVIDEO connection, its picture goes > disordered. It seems that video signal goes to a mode, which is not > supported by my monitor nor my TV. Freevo 1.3.2 works OK. Also > under > XFree Freevo works correctly. If I export SDL_VIDEODRIVER=fbcon I > get > following output: > > > > WARNING: freevo_config.py was changed, please check local_config.py > > You are using version 3.5, changes since then: > Version 3.6: > Added USE_MEDIAID_TAG_NAMES as directory based variable and > HIDE_UNUSABLE_DISCS to hide discs in the wrong menus and empty > drives > > > ROM_DRIVES: Auto-detected and added "('/mnt/cdrom', > '/dev/cdroms/cdrom0', 'CD-1')" > Traceback (most recent call last): > File "./src/main.py", line 99, in ? > skin = skin.get_singleton() > File "./src/skin.py", line 71, in get_singleton > exec('import skins.' + config.OSD_SKIN + '.' + config.OSD_SKIN > + ' > as skinimpl') > File "<string>", line 1, in ? > File "./src/skins/main/main.py", line 58, in ? > import xml_skin > File "./src/skins/main/xml_skin.py", line 57, in ? > osd = osd.get_singleton() > File "./src/osd.py", line 218, in get_singleton > _singleton = util.SynchronizedObject(OSD()) > File "./src/osd.py", line 365, in __init__ > pygame.display.init() > pygame.error: No available video device > > > > On Sun, 2003-08-24 at 16:46, Dirk Meyer wrote: > > teemu ahola wrote: > > > Hi, > > > > > > Sorry. I still does not work ;). Or maybe I did something > wrong. I > > > simply 'check out' files from cvs and ran './freevo setup', > updated > > > freevo.conf 'display = fbdev:vidix' and ran './freevo'. > > > > display=fbdev:vidix is not valid. Use display=fbdev and set > > fbdev:vidix manualy as output device for mplayer. If it still > doesn't > > work, try export SDL_VIDEODRIVER=fbcon before starting Freevo. If > you > > still have problems, please mail what exactly happens. > > > -- > Teemu Ahola > EMail : [EMAIL PROTECTED] > [EMAIL PROTECTED] > Mobile: +358 50 5873210 >
begin:vcard n:ahola;teemu fn:teemu ahola tel;cell:+358 (050) 5873210 adr:;;;Oulu;;;Finland version:2.1 email;internet:[EMAIL PROTECTED] end:vcard