I have a dual 1.0 MDD. Until recently, I was running a drive with Leopard (SATA with ATA bridge) ont the fast bus and an older ATA drive with Tiger on the slower bus.
I recently installed a generic Sil3112 "1+1" card that I had flashed with Mac firmware from Weibe and moved the Leopard drive over to it. Everything seems to work fine with one exception: If I boot the Tiger drive, I can see the Leopard drive on the desktop. If I boot from the Leopard drive on the SATA controller, however, the OS boots fine but the Tiger drive is nowhere to be found. According to the 10.5 system System Profiler, the Sata card is actually an ATA bus, only three are visible, and the Tiger drive is not seen. Thoughts? It seems like something is limited to three ATA busses and the SATA card ends up overriding one of them. -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list