Re: [Gambas-user] Fwd: confirm 0bca3e2cd2fe186cd8c172cee9ce1858aec6ce7a

[David Villalobos Cambronero]

I got it too, don't worry about the pass, we are not going to use it :D

Gracias
---
David

On Tue, Jan 3, 2017 at 12:28 PM, Jussi Lahtinen 
wrote:

> Any clue why I got this?
>
>
> Jussi
>
>
> -- Forwarded message --
> From: 
> Date: Tue, Jan 3, 2017 at 5:53 PM
> Subject: confirm 0bca3e2cd2fe186cd8c172cee9ce1858aec6ce7a
>
>
> Your membership in the mailing list Gambas-user has been disabled due
> to excessive bounces The last bounce received from you was dated
> 03-Jan-2017.  You will not get any more messages from this list until
> you re-enable your membership.  You will receive 3 more reminders like
> this before your membership in the list is deleted.
>
> To re-enable your membership, you can simply respond to this message
> (leaving the Subject: line intact), or visit the confirmation page at
>
> https://lists.sourceforge.net/lists/confirm/gambas-user/
> 0bca3e2cd2fe186cd8c172cee9ce1858aec6ce7a
>
>
> You can also visit your membership page at
>
> https://lists.sourceforge.net/lists/options/gambas-user/
> jussi.lahtinen%40gmail.com
>
>
> On your membership page, you can change various delivery options such
> as your email address and whether you get digests or not.  As a
> reminder, your membership password is
>
> mcvwo5492f
>
> If you have any questions or problems, you can contact the list owner
> at
>
> gambas-user-ow...@lists.sourceforge.net
> 
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> ___
> Gambas-user mailing list
> Gambas-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>
--
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] We live a dangerous life sometimes...

[David Villalobos Cambronero]

Good luck. Hope it goes well.

---
David


On Thu, May 26, 2011 at 12:39, Fabien Bodard gambas...@gmail.com wrote:

 good luck

 2011/5/26 nando nand...@nothingsimple.com:
  Best wishes on your voyage!
 
 
  -- Original Message ---
  From: Benoît Minisini gam...@users.sourceforge.net
  To: gambas-user@lists.sourceforge.net
  Sent: Thu, 26 May 2011 19:15:31 +0200
  Subject: [Gambas-user] We live a dangerous life sometimes...
 
  Hi,
 
  I'm going to flash the firmware of my WD Velociraptor hard disk, because
 it
  freezes sometimes, and I want to know if it will fix that.
 
  So if you have no news from me, it's because some bad things may
 happened!
 
  See you in the next world!
 
  --
  Benoît Minisini
 
 
 --
  vRanger cuts backup time in half-while increasing security.
  With the market-leading solution for virtual backup and recovery,
  you get blazing-fast, flexible, and affordable data protection.
  Download your free trial now.
  http://p.sf.net/sfu/quest-d2dcopy1
  ___
  Gambas-user mailing list
  Gambas-user@lists.sourceforge.net
  https://lists.sourceforge.net/lists/listinfo/gambas-user
  --- End of Original Message ---
 
 
 
 --
  vRanger cuts backup time in half-while increasing security.
  With the market-leading solution for virtual backup and recovery,
  you get blazing-fast, flexible, and affordable data protection.
  Download your free trial now.
  http://p.sf.net/sfu/quest-d2dcopy1
  ___
  Gambas-user mailing list
  Gambas-user@lists.sourceforge.net
  https://lists.sourceforge.net/lists/listinfo/gambas-user
 



 --
 Fabien Bodard


 --
 vRanger cuts backup time in half-while increasing security.
 With the market-leading solution for virtual backup and recovery,
 you get blazing-fast, flexible, and affordable data protection.
 Download your free trial now.
 http://p.sf.net/sfu/quest-d2dcopy1
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user

--
vRanger cuts backup time in half-while increasing security.
With the market-leading solution for virtual backup and recovery, 
you get blazing-fast, flexible, and affordable data protection.
Download your free trial now. 
http://p.sf.net/sfu/quest-d2dcopy1
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] KDE 4.5 / Mandriva 2010.1 / Gambas

[David Villalobos Cambronero]

Thanks!!


Gracias
---
David


2010/8/12 Benoît Minisini gam...@users.sourceforge.net

 Just a warning for Mandriva users...

 If you install KDE 4.5 packages on Mandriva 2010.1, then you won't be able
 to
 compile the Qt4 component, because a file in the qt4-devel package has a
 bug.

 The bad file is named libQtWebKit.la and is located in /usr/lib (or
 /usr/lib64 on 64 bits systems).

 I join a fixed libQtWebKit.la so that everything compiles correctly!

 Regards,

 --
 Benoît Minisini


 --
 This SF.net email is sponsored by

 Make an app they can't live without
 Enter the BlackBerry Developer Challenge
 http://p.sf.net/sfu/RIM-dev2dev
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user


--
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] DatePicker and MessageLabel were disabled in revision #3084

[David Villalobos Cambronero]

Hi all, I wrote MessageLabel, if some people use it, I'll fix it,
otherwise just delete it.

Regards
---
David

2010/7/31 Benoît Minisini gam...@users.sourceforge.net:
 Hi,

 As the subject said, I have disabled DatePicker and MessageLabel in the
 gb.form component, to see if someone use them.

 These controls have problems, especially the DatePicker, and if their creator
 want to fix them, they should tell me. Otherwise they may be removed, or
 rewritten if I have time and someone really needs them.

 In the same revision, you can add close buttons to TabStrip tabs, as someone
 asked recently.

 Regards,

 --
 Benoît Minisini

 --
 The Palm PDK Hot Apps Program offers developers who use the
 Plug-In Development Kit to bring their C/C++ apps to Palm for a share
 of $1 Million in cash or HP Products. Visit us here for more details:
 http://p.sf.net/sfu/dev2dev-palm
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user


--
The Palm PDK Hot Apps Program offers developers who use the
Plug-In Development Kit to bring their C/C++ apps to Palm for a share
of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Detect a Window closed in Workspace

[David Villalobos Cambronero]

Hi, I got a problem, here is the scenario:

I got a WorkSpace, to this work space I add some objects, these objects
inherits from Window, and basicaly has an Editor inside of them, I load a
text from a file to the Editor, what I need is that when the WorkSpace tab
is closed I need to check if there are modification without been saved.

How can I know if the ActiveWindow of the Workspace is going to be closed?

-- 
Regards
---
David
--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Detect a Window closed in Workspace

[David Villalobos Cambronero]

You will have to help out a bit more :)

Here is the header of the class Added to the Workspace:

' Gambas class file

Inherits Window

Private $hPHPEditor As Editor

Public Sub _new()

  Me.Arrangement = Arrange.Fill
  Me.Expand = True

  $hPHPEditor = New Editor(Me) As PHPEditor
  $hPHPEditor.Expand = True
  $hPHPEditor.Highlight = Highlight.Custom

End Sub

How do I implement the Close event in this case?

-- 
Regards
---
David
--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Detect a Window closed in Workspace

[David Villalobos Cambronero]

2010/4/26 Benoît Minisini gam...@users.sourceforge.net

  You will have to help out a bit more :)
 
  Here is the header of the class Added to the Workspace:
 
  ' Gambas class file
 
  Inherits Window
 
  Private $hPHPEditor As Editor
 
  Public Sub _new()
 
Me.Arrangement = Arrange.Fill
Me.Expand = True
 
$hPHPEditor = New Editor(Me) As PHPEditor
$hPHPEditor.Expand = True
$hPHPEditor.Highlight = Highlight.Custom
 
  End Sub
 
  How do I implement the Close event in this case?

 As any other object. When you instanciate the Window class, the object
 where
 you instanciate it becomes its event observer, provided that you specified
 an
 event handler prefix with the AS keyword.

 Regards,

 --
 Benoît Minisini


 --
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user



Now I got it, thanks

-- 
Regards
---
David
--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Find a ( with a Regexp

[David Villalobos Cambronero]

Hi, I need to find a ( with an a Regexp.

Does anybody knows how to? I've tried but I could not :(

-- 
Regards
---
David
--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Find a ( with a Regexp

[David Villalobos Cambronero]

No, it has to be inside a Regexp

$hRexEpr = New Regexp($sLineSymbol, ^function \()

But it does no work :(

-- 
Gracias
---
David
--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Licensing problems in Gambas

[David Villalobos Cambronero]

Maybe not too usefull but

1- Can we use GPL 3 for wiki?

2- I think the first stet will be write a mail to www.ibpp.org and ask them for 
permition. :) And we can make a list of all gb.db.firebird users to see if they 
how many their are, and maybe write a Letter in name of all of them to let know 
their will to use Firebird  Gambas.

 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: gambas-user@lists.sourceforge.net
Sent: Thu, November 19, 2009 6:09:52 AM
Subject: [Gambas-user] Licensing problems in Gambas

Hi,

There are two licensing problems in Gambas that must be solved.

1) The first one should not be difficult: we must find a license for the 
gambas wiki documentation that makes it free. I need suggestions...

2) The bad problem: gb.db.firebird uses two sources files from www.ibpp.org 
whose license (the Borland Interbase Public License) is not compatible with 
the GPL. This point was raised by Kelly Hopkins, the maintainer of the gnu.org 
free software directory. I'm afraid Gambas will have to lose firebird support, 
but maybe we should ask www.ibpp.org about that. I need help there too!

Thanks in advance for your comments.

Regards,

-- 
Benoît Minisini


--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Good news!!

[David Villalobos Cambronero]

Hi, Benoît  All:

Days ago one friend call me to ask to
by a judge in a scientific exposition, my surprise came when he told
me that one of the projects was created with gambas by a couple of
students. They made a system to turn lights on  off in a house.
The use the LPT1 port to interact with the lights.

They made it complete by themselves and
they are 17 years old!

I just wanted to share this news with
you, I think is great that young people are using Gambas in my
country (Costa Rica).

This shows how easy-to-use and reliable
gambas could be.

The students are very exited because I
told them I will share this news with all of you, if there is
something you want me to tell them, just let me know.

Best Regards.

David.


  

--
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay 
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Set text to a spinbox

[David Villalobos Cambronero]

Hi all, How do I write text to a spinbox like the pic shown in the help. See 
the link: http://gambasdoc.org/help/comp/gb.qt/spinbox

 Regards


--
David



  

--
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay 
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Passive wait ???

[David Villalobos Cambronero]

What about using MessageLabel?

 Regards


--
David



- Original Message 
From: M0E Lnx m0e@gmail.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Tuesday, September 22, 2009 2:55:24 PM
Subject: [Gambas-user] Passive wait ???

I'm trying to implement soft of a status bar on my application.
When certain actions are performed, I want to display the successful
results on this status bar, rather than a pop-up message. This is an
attempt to reduce the number of clicks necessary (get annoying after a
while).

So I thought, to accomplish this, I can add a text label a the bottom
of my form, and use it as a status bar.
When a task is performed succesffully, I want it to display the
message for 5 seconds and then clear the status bar, so I thogh

tlStatusLbl.text = Task succeeded
wait 5
tlStatusLbl.text = 

And that works, except that while it's in that WAIT loop, the whole
app lags, and the app doesn't move or refresh until the wait period is
over.

Does anyone know a way to send this wait to the background or another
way to implement this behaviour?

--
Come build with us! The BlackBerryreg; Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay 
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  


--
Come build with us! The BlackBerryreg; Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay 
ahead of the curve. Join us from November 9#45;12, 2009. Register now#33;
http://p.sf.net/sfu/devconf
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Obtain my IP with Gambas

[David Villalobos Cambronero]

Hi, is there an easy way to obtain my IP address?

 Regards


--
David



  


--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Obtain my IP with Gambas

[David Villalobos Cambronero]

 it's OK, I think there must be something like User.IP :)

 Regards


--
David



- Original Message 
From: nando nand...@nothingsimple.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, September 9, 2009 9:23:55 AM
Subject: Re: [Gambas-user] Obtain my IP with Gambas

The way I do it is by shelling the ip command
At the prompt:

   ip addr | grep -w inet

I have redirected it to a file and parse items the lines
I have used SHELL .. FOR READ and used PROCESS_READ
to parse the lines

Somebody may have something much more elegant.
-Fernando


-- Original Message ---
From: David Villalobos Cambronero david_villalobo...@yahoo.com
To: Gambas Inglés gambas-user@lists.sourceforge.net
Sent: Wed, 9 Sep 2009 07:52:43 -0700 (PDT)
Subject: [Gambas-user] Obtain my IP with Gambas

 Hi, is there an easy way to obtain my IP address?
 
  Regards
 
 --
 David
 
 --
 Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
 trial. Simplify your report design, integration and deployment - and focus on 
 what you do best, core application coding. Discover what's new with 
 Crystal Reports now.  http://p.sf.net/sfu/bobj-july
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user
--- End of Original Message ---


--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  


--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Obtain my IP with Gambas

[David Villalobos Cambronero]

Hi, It works just fine. Thanks Jean-Yves
 Regards


--
David



- Original Message 
From: Jean-Yves F. Barbier 12u...@gmail.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, September 9, 2009 9:44:14 AM
Subject: Re: [Gambas-user] Obtain my IP with Gambas

David Villalobos Cambronero a écrit :
 Hi, is there an easy way to obtain my IP address?

by shell, I use:
ifconfig | grep inet | cut -d: -f2 | cut -d' ' -f1 | grep -v 127

if you have multiple interfaces, you must add (for each unwanted): 
| grep -v nnn.nnn.nnn.nnn
at the end

HTH
JY
-- 
I don't mind what Congress does, as long as they don't do it in the
streets and frighten the horses.
-- Victor Hugo

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  


--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Need help / call for volunteers

[David Villalobos Cambronero]

Thanks Joshua, I'll add your code ASAP, just let me finish some small changes.

Can we try this, specially on vector Linux? Please.

I now adding ./reconf-all, etc are pending, just be paitient.

 Regards


--
David



- Original Message 
From: Joshua Higgins joshigg...@googlemail.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Monday, August 24, 2009 11:25:35 AM
Subject: Re: [Gambas-user] Need help / call for volunteers

I've adapted David's original script, adding more distro detection and cpu
architecture identification.

Attached, writes log to report2.log


-- 
joshua higgins
--



  

report
Description: Binary data
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Need help / call for volunteers

[David Villalobos Cambronero]

The same for any other distro?

 Regards


--
David



- Original Message 
From: M0E Lnx m0e@gmail.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Monday, August 24, 2009 11:50:53 AM
Subject: Re: [Gambas-user] Need help / call for volunteers

Still not good on Vector

==
vluser:$ cat report.log
[OperatingSystem]
OperatingSystem=Linux
KernelRelease=2.6.27.29

[Distribution]
ID=
RELEASE=
CODENAME=
DESCRIPTION=

[Hardware]
Architecture=2.6.27.29

[Gambas]
Gambas=
Gambas2=2.15.2
Gambas3=
==

And here is the complete output of report2.log
==
vluser:$ sh report2
report2: line 22: [: /etc/slackware-version: binary operator expected
report2: line 39: gbx: command not found
report2: line 41: gbx3: command not found
VLVM:/~/Downloads
vluser:$ cat report2.log
[OperatingSystem]

OperatingSystem=Linux
KernelRelease=2.6.27.29
CPUArchitecture=i686
Distribution=

[Gambas]
Gambas1=
Gambas2=2.15.2
Gambas3=
===

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  


--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Need help / call for volunteers

[David Villalobos Cambronero]

Well, I think you're closer than me. So you can finish the job.

 Regards


--
David



- Original Message 
From: Joshua Higgins joshigg...@googlemail.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Monday, August 24, 2009 1:48:17 PM
Subject: Re: [Gambas-user] Need help / call for volunteers


 it work well here too... just ... you have a blank line after
 [OperatingSystem]


At the moment, I'm unsure whether to keep updating and attaching this script
until we know the status of David's script and how far he is along...

However the blank line is by accident... nothing should be there :-)


-- 
joshua higgins
--
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  


--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Need help / call for volunteers

[David Villalobos Cambronero]

Hi, how can I take The distribution   The distribution version?

It the same for all Linux?

 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: gambas-user@lists.sourceforge.net
Sent: Tuesday, August 18, 2009 3:08:28 PM
Subject: [Gambas-user] Need help / call for volunteers

Hi,

As you may have noticed, each time someone has a problem with Gambas, the same 
information is always requested.

So I'm looking for kind peoples who would write a shell script for Gambas that 
automatically dump all the needed information in a text file.

The information needed are:
- The OS.
- The distribution.
- The distribution version.
- The CPU.
- The architecture (32/64 bits).
- The version of Gambas.
- The output of ./reconf  ./configure -C (optional)

Of course, other information can be added.

I have tons of things to do, so I ask for help. Any volunteer?

-- 
Benoît

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Need help / call for volunteers

[David Villalobos Cambronero]

Well, right now I'm learning Java (under windows :( ), so I'm very busy, if no 
body take cake of it I'll take a look on it next week.

 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Tuesday, August 18, 2009 4:02:23 PM
Subject: Re: [Gambas-user] Need help / call for volunteers

 Hi David,
 I normaly look at the /etc/issue file, which if not edited, contains
 the distribution name and version. It works for Fedoras and Ubuntus, but
 I am not sure whether it's standard across other distributions.
 Regards,
 Toni


It works for Mandriva too.

-- 
Benoît

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Question about gb.db

[David Villalobos Cambronero]

Have you ever try $Conn.Exec()

 Regards


--
David



- Original Message 
From: Charlie Reinl karl.re...@fen-net.de
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Friday, August 14, 2009 11:10:52 AM
Subject: [Gambas-user] Question about gb.db

Salut,

till now I use the Request part in $hConn.Find to set my sorting 
Order by
Is there a better/easier way, which I ignore ?

Hope you have solutions.

for gambas2 (2.15.2)

-- 
Amicalment
Charlie


--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Executing commands as root

[David Villalobos Cambronero]

Hi all, 

Time ago, someone asked about executing commands as root and pass the root 
password to SHELL, does anybody remember the solution?

 Regards


--
David



  

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Executing commands as root

[David Villalobos Cambronero]

Hey Thanks to all, very helpful 

 Regards


--
David



- Original Message 
From: Steven revimmo ste...@revimmo.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, August 5, 2009 9:30:46 AM
Subject: Re: [Gambas-user] Executing commands as root

I used this :
  SHELL kdesu   Chr(34)  /usr/sbin/lpadmin -p request_ps -v
'pipe:/bin/cat -User.Home  /request/work/tempfile.ps' -m
PostscriptColor.ppd -E  Chr(34) WAIT

(to install a printer)

cheers,
steven


Le mercredi 05 août 2009 à 17:07 +0200, Stefano Palmeri a écrit :

 Il mercoledì 5 agosto 2009 15:45:24 David Villalobos Cambronero ha scritto:
  Hi all,
 
  Time ago, someone asked about executing commands as root and pass the root
  password to SHELL, does anybody remember the solution?
 
   Regards
 
 
  --
  David
 
 
 
 He was me. My error was I opened the shell process 
 FOR READ WRITE instead of INPUT OUTPUT. 
 I attache a little example so it will be clear howto.
 The example is a form with a textbox. You type
 the root password and confirm and you execute
 cat /etc/sudoers as root (you'll see the output on Gambas
 console). It's just an example, you can try any other root command.
 Other solutions includes using gtksu or kdesu, but this way you
 depend on desktop.
 
 Ciao,
 
 Stefano
 
 
 
  ---
 --- Let Crystal Reports handle the reporting - Free Crystal Reports 2008
  30-Day trial. Simplify your report design, integration and deployment - and
  focus on what you do best, core application coding. Discover what's new
  with Crystal Reports now.  http://p.sf.net/sfu/bobj-july
  ___
  Gambas-user mailing list
  Gambas-user@lists.sourceforge.net
  https://lists.sourceforge.net/lists/listinfo/gambas-user
 
 
 --
 Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
 trial. Simplify your report design, integration and deployment - and focus on 
 what you do best, core application coding. Discover what's new with 
 Crystal Reports now.  http://p.sf.net/sfu/bobj-july
 ___ Gambas-user mailing list 
 Gambas-user@lists.sourceforge.net 
 https://lists.sourceforge.net/lists/listinfo/gambas-user
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Column auto reseize in tables views.

[David Villalobos Cambronero]

ThanksStefano, very helpful

 Regards


--
David



- Original Message 
From: Stefano Palmeri rospolo...@tiscali.it
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Sunday, August 2, 2009 3:22:09 AM
Subject: Re: [Gambas-user] Column auto reseize in tables views.

Il sabato 1 agosto 2009 19:36:51 David Villalobos Cambronero ha scritto:
 Hi all,

 How can I automaticly auto resize the column width of my gridview or
 tableview. I mean, when I show the view, I want all the columns adjusted to
 the cell content.

  Regards


 --
 David

You can't automatically. You could write a function 
to calculate the maximum length of a cell content
in the same column and then change the column width.
The basic thing is that you have to calculate the width
of a cell content. You could do this:

Dim iContentW as Integer

iContentW = GridView1.Font.Width(GridView1[0,0].Text)

Once you have the longest cell content, you can resize that
column adding a little value.

GridView1.Columns[0].Width = iContentW + 10

You have to calculate the width of all cell content of a specific row,
select the longest, resize the column. Not comfortable, but not impossible.


Bye,

Stefano









 ---
--- Let Crystal Reports handle the reporting - Free Crystal Reports 2008
 30-Day trial. Simplify your report design, integration and deployment - and
 focus on what you do best, core application coding. Discover what's new
 with Crystal Reports now.  http://p.sf.net/sfu/bobj-july
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user



--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Column auto reseize in tables views.

[David Villalobos Cambronero]

Thanks Benoit, very helpful

 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Sunday, August 2, 2009 3:54:12 AM
Subject: Re: [Gambas-user] Column auto reseize in tables views.

 Il sabato 1 agosto 2009 19:36:51 David Villalobos Cambronero ha scritto:
  Hi all,
 
  How can I automaticly auto resize the column width of my gridview or
  tableview. I mean, when I show the view, I want all the columns adjusted
  to the cell content.
 
   Regards
 
 
  --
  David

 You can't automatically. You could write a function
 to calculate the maximum length of a cell content
 in the same column and then change the column width.
 The basic thing is that you have to calculate the width
 of a cell content. You could do this:

 Dim iContentW as Integer

 iContentW = GridView1.Font.Width(GridView1[0,0].Text)

 Once you have the longest cell content, you can resize that
 column adding a little value.

 GridView1.Columns[0].Width = iContentW + 10

 You have to calculate the width of all cell content of a specific row,
 select the longest, resize the column. Not comfortable, but not impossible.


 Bye,

 Stefano


Normally, setting the column width or row height to -1 does the job, but:
- It seems to work strangely when the GridView is filled by the Data event.
- It is not implemented in gb.gtk yet.

Regards,


-- 
Benoît

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Column auto reseize in tables views.

[David Villalobos Cambronero]

Hi all,

How can I automaticly auto resize the column width of my gridview or tableview. 
I mean, when I show the view, I want all the columns adjusted to the cell 
content.

 Regards


--
David



  

--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] gb.qt.kde.html

[David Villalobos Cambronero]

Application.Theme = qt

 Regards


--
David



- Original Message 
From: Pino Zollo pinozo...@gmail.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Friday, July 24, 2009 12:47:47 PM
Subject: [Gambas-user] gb.qt.kde.html

Hi,
I have just added the components  gb.qt.kde  and gb.qt.kde.html ad all my 
project did change look like if QT were not present. 

How can I force the QT look ?

Thank you

Pino
-- 
Key ID: 0xF6768208 
Key fingerprint = B16D 0A7C 5B29 A334 CE6A  71F6 EAF8 3D88 F676 8208
Key server: hkp://wwwkeys.eu.pgp.net

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] gb.qt.kde.html

[David Villalobos Cambronero]

Really don't know

 Regards


--
David



- Original Message 
From: Pino Zollo pinozo...@gmail.com
To: David Villalobos Cambronero david_villalobo...@yahoo.com
Sent: Friday, July 24, 2009 1:52:12 PM
Subject: Re: [Gambas-user] gb.qt.kde.html

Il venerdì 24 luglio 2009 15:40:32 hai scritto:
 if you set it to qt4?

  Regards

Just done but no change...seems inactive.

Ciao

Pino

-- 
Key ID: 0xF6768208 
Key fingerprint = B16D 0A7C 5B29 A334 CE6A  71F6 EAF8 3D88 F676 8208
Key server: hkp://wwwkeys.eu.pgp.net



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] A screenshot of Qt 4 WebKit inside Gambas 3

[David Villalobos Cambronero]

It looks simply GREAT I can't wait to try it,

Come on Benoit, make the commit ASAP :-)

 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: richard terry rte...@pacific.net.au; mailing list for gambas users 
gambas-user@lists.sourceforge.net
Sent: Thursday, July 23, 2009 5:26:50 AM
Subject: Re: [Gambas-user] A screenshot of Qt 4 WebKit inside Gambas 3

 On Thu, 23 Jul 2009 11:40:57 am Benoît Minisini wrote:
  The quality of the jpeg is bad so that its size is lower than 256 Kb.
  This is the web application I develop for my job.
 
  Apparently there are some display bugs in WebKit when displaying
  underlined links...
 
  But hey, it seems to work quite reliably.

 Can we access web-kit now in Gambas?

 richard


Wait for the commit dude. :-)

-- 
Benoît

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Blob management

[David Villalobos Cambronero]

It doesn't work, the file is saved emty.

Benoit, any idea?

 Regards


--
David



- Original Message 
From: Werner wd...@netfront.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Thursday, June 25, 2009 9:39:52 PM
Subject: Re: [Gambas-user] Blob management

David Villalobos Cambronero wrote:
 Forgot to add more details.

 And yes, the example works fine but I don't get it to work in my app.

 Here is the senario:

 I got a table with a picture (just a record) and I want to save it to the 
 disk, (PictureDatabase does it by the PictureBox not directly).

 Driver: mysql, Mandriva 2009.1 32 bits, Gambas 2

  
 Here are my statements

   DIM hResultado AS Result

   IF NOT Exist(/tmp/mas) THEN MKDIR /tmp/mas
   hResultado = $hConn.Exec(SELECT * FROM `Pics`)
   File.Save(/tmp/1.jpg, hResultado[Pic].Data)

 Or can you provide me an example of saving to disk an image stored in a 
 database?


 Regards


 --
 David



 - Original Message 
 From: Benoît Minisini gam...@users.sourceforge.net
 To: mailing list for gambas users gambas-user@lists.sourceforge.net
 Sent: Thursday, June 25, 2009 3:29:20 PM
 Subject: Re: [Gambas-user] Blob management

  
 Hi, is there a problem with this instuction?

   hResultado = $hConn.Exec(SELECT Pic FROM Pics)
   File.Save(/tmp/1.jpg, hResultado[Pic].Data)


 I can't get them work!

  Regards


 --
 David



 Can you give more details? (versions, database driver)...

 Does the PictureDatabase example work?

  
You are using constructs that I have never seen before. Would this be
better?

  DIM hResultado AS Result

  IF NOT Exist(/tmp/mas) THEN MKDIR /tmp/mas
  hResultado = $hConn.Exec(SELECT * FROM `Pics`)
  File.Save(/tmp/mas/1.jpg, hResultado!fieldname)



--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Blob management

[David Villalobos Cambronero]

I do this:

  DIM hResultado AS Result
  DIM sImagen AS String

  IF NOT Exist(/tmp/mas) THEN MKDIR /tmp/mas
  hResultado = $hConn.Exec(SELECT * FROM `Imagenes`)
  sImagen = hResultado[Imagen].Data --- Fails here Not 
an object
  File.Save(/tmp/mas/1.jpg, sImagen)


and

  DIM hResultado AS Result
  DIM sImagen AS String

  IF NOT Exist(/tmp/mas) THEN MKDIR /tmp/mas
  hResultado = $hConn.Exec(SELECT * FROM `Imagenes`)
  sImagen = hResultado[Imagen]
  File.Save(/tmp/mas/1.jpg, sImagen)

Saves an empty file.


 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Friday, June 26, 2009 8:21:41 AM
Subject: Re: [Gambas-user] Blob management

 It doesn't work, the file is saved emty.

 Benoit, any idea?

  Regards


 --
 David



What happens if you put the blob data into a string variable before using 
File.Save() ?

-- 
Benoît

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Blob management

[David Villalobos Cambronero]

Hi, first of all thanks to Benoit, Ron and Wener for help me.

Just to be clear if someone reads this in the future, these statementst are 
correct:

  DIM hResultado AS Result

  IF NOT Exist(/tmp/mas) THEN MKDIR /tmp/mas
  hResultado = $hConn.Exec(SELECT * FROM `Imagenes`)
  File.Save(/tmp/mas/1.jpg, hResultado[Imagen].Data)


 
The problem is that gambas espect a longblob and my field is mediumblob, if I 
change the datatype to longblob the statements above work fine.

So, I think this was the problem, BUT, the problem is that the pictures I want 
to storage are not that big, so I will waste some space, Bonoit, can you 
(actualy you) change this interpretation of the Gambas database component? to 
use more optimal datatypes? Maybe for Gambas3?

Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Friday, June 26, 2009 9:15:43 AM
Subject: Re: [Gambas-user] Blob management

 I do this:

   DIM hResultado AS Result
   DIM sImagen AS String

   IF NOT Exist(/tmp/mas) THEN MKDIR /tmp/mas
   hResultado = $hConn.Exec(SELECT * FROM `Imagenes`)
   sImagen = hResultado[Imagen].Data --- Fails here
 Not an object 

Well, that means that hResultado[Imagen] returns NULL. 

Are you sure that your field is interpreted as a Blob by Gambas? I remind 
you that MySQL has no blob field type, only string field types. 

So Gambas has to make a choice, and only string field types whose maximum 
length is greater then 2^24 is a blob.

-- 
Benoît

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Blob management

[David Villalobos Cambronero]

Form MySQL 5.1 Manual, page 603:

  -  Data Type  -  - Storage Required  -
BLOB, TEXT   L+2 bytes, where L  2^16
MEDIUMBLOB, MEDIUMTEXT L+3 bytes, where L  2^24
LONGBLOB, LONGTEXT L+4 bytes, where L  2^32


I just need  2^24 not 2^32. Since LONGBLOB is not a VARBLOB I thnik it will 
take all the space.

But I'm not a mysql expert.

Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Friday, June 26, 2009 10:04:27 AM
Subject: Re: [Gambas-user] Blob management

 Hi, first of all thanks to Benoit, Ron and Wener for help me.

 Just to be clear if someone reads this in the future, these statementst are
 correct:

   DIM hResultado AS Result

   IF NOT Exist(/tmp/mas) THEN MKDIR /tmp/mas
   hResultado = $hConn.Exec(SELECT * FROM `Imagenes`)
   File.Save(/tmp/mas/1.jpg, hResultado[Imagen].Data)



 The problem is that gambas espect a longblob and my field is mediumblob, if
 I change the datatype to longblob the statements above work fine.

 So, I think this was the problem, BUT, the problem is that the pictures I
 want to storage are not that big, so I will waste some space, Bonoit, can
 you (actualy you) change this interpretation of the Gambas database
 component? to use more optimal datatypes? Maybe for Gambas3?

 Regards


 --
 David



I don't think you will waste any space by using longblob (or longtext) instead 
of mediumblob (or mediumtext). Why do you think that?

-- 
Benoît

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Blob management

[David Villalobos Cambronero]

Hi, is there a problem with this instuction?

  hResultado = $hConn.Exec(SELECT Pic FROM Pics)
  File.Save(/tmp/1.jpg, hResultado[Pic].Data)


I can't get them work!

 Regards


--
David



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Blob management

[David Villalobos Cambronero]

Forgot to add more details.

And yes, the example works fine but I don't get it to work in my app.

Here is the senario:

I got a table with a picture (just a record) and I want to save it to the disk, 
(PictureDatabase does it by the PictureBox not directly).

Driver: mysql, Mandriva 2009.1 32 bits, Gambas 2

 
Here are my statements

  DIM hResultado AS Result

  IF NOT Exist(/tmp/mas) THEN MKDIR /tmp/mas
  hResultado = $hConn.Exec(SELECT * FROM `Pics`)
  File.Save(/tmp/1.jpg, hResultado[Pic].Data)

Or can you provide me an example of saving to disk an image stored in a 
database?


Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Thursday, June 25, 2009 3:29:20 PM
Subject: Re: [Gambas-user] Blob management

 Hi, is there a problem with this instuction?

   hResultado = $hConn.Exec(SELECT Pic FROM Pics)
   File.Save(/tmp/1.jpg, hResultado[Pic].Data)


 I can't get them work!

  Regards


 --
 David


Can you give more details? (versions, database driver)...

Does the PictureDatabase example work?

-- 
Benoît

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Welcome to QT4!

[David Villalobos Cambronero]

Found the first bug, the Underscore ( _ ) is not show in the editor.

Mandriva 2009.1 32 bits KDE.

 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Monday, June 22, 2009 10:18:49 AM
Subject: Re: [Gambas-user] Welcome to QT4!

 Great!!! I think it will be nice to use qt4 in the Gambas IDE, so we can
 find errors easily... don't you think?

  Regards


 --
 David


I'm currently doing that. :-) Debugging a crash...

-- 
Benoît

--
Are you an open source citizen? Join us for the Open Source Bridge conference!
Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250.
Need another reason to go? 24-hour hacker lounge. Register today!
http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Are you an open source citizen? Join us for the Open Source Bridge conference!
Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250.
Need another reason to go? 24-hour hacker lounge. Register today!
http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] MySQL database interaction tutorial

[David Villalobos Cambronero]

try this:http://gambasdoc.org/help/howto/database

or ask me all you need

 Regards


--
David



- Original Message 
From: Keith Clark keithcl...@k-wbookworm.com
To: gambas-user@lists.sourceforge.net
Sent: Thursday, May 28, 2009 1:30:27 PM
Subject: [Gambas-user] MySQL database interaction tutorial

Is there a good MySQL interaction tutorial available?

Keith



--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT 
is a gathering of tech-side developers  brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing,  
iPhoneDevCamp as they present alongside digital heavyweights like Barbarian 
Group, R/GA,  Big Spaceship. http://p.sf.net/sfu/creativitycat-com 
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT 
is a gathering of tech-side developers  brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing,  
iPhoneDevCamp as they present alongside digital heavyweights like Barbarian 
Group, R/GA,  Big Spaceship. http://p.sf.net/sfu/creativitycat-com 
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] New feature in /trunk

[David Villalobos Cambronero]

Got this error compiling new rev at Mandriva 2009.1 32Bits

debug.c: In function 'command_eval':
debug.c:726: error: too few arguments to function 'EVAL.Compile'
make[5]: *** [debug.lo] Error 1
make[5]: se sale del directorio `/home/david/Gambas3/main/lib/debug'


 Saludos


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: gambas-user@lists.sourceforge.net
Sent: Tuesday, May 26, 2009 4:55:04 PM
Subject: [Gambas-user] New feature in /trunk

Hi,

I just added a new feature in the development version: the Assign() function.

It is like Eval(), except that the expression can be an assignment. It returns 
the assigned value.

For example:

Dim hCtrl As Control ' Any control
Assign(a.Text = \Hello\, [a: hCtrl])

will assign the Hello string to the Text property of hCtrl.

At the moment, you cannot something like:

Assign(a.x = NEW Timer)
Assign(a.y = OPEN \file\)

But this is planned.

Enjoy it!

-- 
Benoît

--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT 
is a gathering of tech-side developers  brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing,  
iPhoneDevCamp as they present alongside digital heavyweights like Barbarian 
Group, R/GA,  Big Spaceship. http://p.sf.net/sfu/creativitycat-com 
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT 
is a gathering of tech-side developers  brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing,  
iPhoneDevCamp as they present alongside digital heavyweights like Barbarian 
Group, R/GA,  Big Spaceship. http://p.sf.net/sfu/creativitycat-com 
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Web site translations

[David Villalobos Cambronero]

Don't worry, it is done, but thanks

 Regards


--
David



- Original Message 
From: Sergio A. Hernandez info.g...@gmail.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, May 20, 2009 7:18:56 PM
Subject: Re: [Gambas-user] Web site translations

David,
Do you need some help with the Spanish translation?
Let me know.

On Wed, May 20, 2009 at 8:55 AM, David Villalobos Cambronero 
david_villalobo...@yahoo.com wrote:


 I just started with the Spanish translation.

  Regards


 --
 David



 - Original Message 
 From: Benoît Minisini gam...@users.sourceforge.net
 To: gambas-user@lists.sourceforge.net
 Sent: Wednesday, May 20, 2009 8:42:13 AM
 Subject: [Gambas-user] Web site translations

 Hi everyone,

 The Gambas web site is now fully translatable.

 To do that, most of the pages were moved to the wiki - pages that are
 generated cannot go to the wiki.

 Everything is in a new project located in /trunk/app/src named
 MakeWebSite
 (original, isn't it?).

 This project generates the HTML pages in all specified languages from HTML
 templates where string to be translated are marked.

 To do the translation, just translate the MakeWebSite project as any other
 Gambas project. You need a subversion write access to commit your changes,
 so
 ask me if you don't have one.

 News can be translated too, provided that you add the news html files to
 the
 /news/ project directory, where  is your language code.

 You don't have to run the project. If you do it anyway, it will generate
 the
 HTML directly inside the project directory. But as these generated files
 are
 not versioned, they will never be committed.

 Note that not all strings are marked yet, and some pages will move to the
 wiki.

 To translate the pages located in the wiki, just go to the wiki.

 If you want to translate the website to a new language, just tell me and I
 will add it to the project, with the corresponding flag.

 And of course if you want more details, ask!

 Regards,

 --
 Benoît


 --
 Crystal Reports - New Free Runtime and 30 Day Trial
 Check out the new simplified licensing option that enables
 unlimited royalty-free distribution of the report engine
 for externally facing server and web deployment.
 http://p.sf.net/sfu/businessobjects
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user






 --
 Crystal Reports - New Free Runtime and 30 Day Trial
 Check out the new simplified licensing option that enables
 unlimited royalty-free distribution of the report engine
 for externally facing server and web deployment.
 http://p.sf.net/sfu/businessobjects
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user

--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of tech-side developers  brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing,  
iPhoneDevCamp asthey present alongside digital heavyweights like Barbarian
Group, R/GA,  Big Spaceship. http://www.creativitycat.com 
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of tech-side developers  brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing,  
iPhoneDevCamp asthey present alongside digital heavyweights like Barbarian
Group, R/GA,  Big Spaceship. http://www.creativitycat.com 
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Web site translations

[David Villalobos Cambronero]

I just started with the Spanish translation.

 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: gambas-user@lists.sourceforge.net
Sent: Wednesday, May 20, 2009 8:42:13 AM
Subject: [Gambas-user] Web site translations

Hi everyone,

The Gambas web site is now fully translatable.

To do that, most of the pages were moved to the wiki - pages that are 
generated cannot go to the wiki.

Everything is in a new project located in /trunk/app/src named MakeWebSite 
(original, isn't it?).

This project generates the HTML pages in all specified languages from HTML 
templates where string to be translated are marked.

To do the translation, just translate the MakeWebSite project as any other 
Gambas project. You need a subversion write access to commit your changes, so 
ask me if you don't have one.

News can be translated too, provided that you add the news html files to the 
/news/ project directory, where  is your language code.

You don't have to run the project. If you do it anyway, it will generate the 
HTML directly inside the project directory. But as these generated files are 
not versioned, they will never be committed.

Note that not all strings are marked yet, and some pages will move to the 
wiki.

To translate the pages located in the wiki, just go to the wiki.

If you want to translate the website to a new language, just tell me and I 
will add it to the project, with the corresponding flag.

And of course if you want more details, ask!

Regards,

-- 
Benoît

--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Web site translations

[David Villalobos Cambronero]

ok, I'll will

 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, May 20, 2009 9:03:30 AM
Subject: Re: [Gambas-user] Web site translations

 I just started with the Spanish translation.

  Regards


 --
 David


Note that you have to add es:es_ES.UTF-8 to the list of languages in the 
$aLanguages global variable in the MMain module.

Regards,

-- 
Benoît

--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Web site translations

[David Villalobos Cambronero]

Hi,

My language has special characters like, á, Á, etc. Since those file will be 
web pages, do I have to place the HTML tags for those special chars? I mean, in 
the translation do I have to replace á for aacute;?

 Regards


--
David



- Original Message 
From: David Villalobos Cambronero david_villalobo...@yahoo.com
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, May 20, 2009 9:11:44 AM
Subject: Re: [Gambas-user] Web site translations


ok, I'll will

Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, May 20, 2009 9:03:30 AM
Subject: Re: [Gambas-user] Web site translations

 I just started with the Spanish translation.

  Regards


 --
 David


Note that you have to add es:es_ES.UTF-8 to the list of languages in the 
$aLanguages global variable in the MMain module.

Regards,

-- 
Benoît

--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] kdesu vs gksu

[David Villalobos Cambronero]

Hi,

  If Application.Env[KDE_FULL_SESSION] Then
Shell kdesu   Command
  Else If Application.Env[GNOME_DESKTOP_SESSION_ID] Then 
Shell gksu   Command
  Endif


 Saludos


--
David



- Original Message 
From: Jesus Guardon jguar...@telefonica.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Monday, May 18, 2009 3:20:29 PM
Subject: [Gambas-user] kdesu vs gksu

Yes, I know it may be a little off-topic, but the question is:

I need to launch a process with root privileges from SHELL command in 
Gambas. Users of my application can have Gnome or KDE, so I don't know 
which command I must issue to get it to work.

Is there a way to choose between either gksu o kdesu commands at runtime?
I've figured it out if it could be something like:

  SHELL gksu | kdesu -u root 'some_command'

or

SHELL gksu -u root 'some_command' | kdesu -u root 'some_command'

Regards

Jesús

--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Help using gb.pcre

[David Villalobos Cambronero]

Hi, I need to match some regular expresions, I think I can use Gambas to do it, 
in the documentation says somethig like this:


(?i)\b[a-z0-9._%\...@[a-z0-9._%\-]+\.[a-z]{2,4}\b


But how can I use it, any idea? 

Any help need thanks.
Regards


--
David



  

--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Help using gb.pcre

[David Villalobos Cambronero]

Many thanks, maybe a little example in the wiki could help.

 Regards


--
David



- Original Message 
From: Rob sourceforge-raind...@kudla.org
To: gambas-user@lists.sourceforge.net
Sent: Tuesday, March 10, 2009 2:53:08 PM
Subject: Re: [Gambas-user] Help using gb.pcre

On Tuesday 10 March 2009 15:44, David Villalobos Cambronero w
 Hi, I need to match some regular expresions, I think I can use Gambas to
 do it, in the documentation says somethig like this:
 (?i)\b[a-z0-9._%\...@[a-z0-9._%\-]+\.[a-z]{2,4}\b
 But how can I use it, any idea?

That regular expression is meant to extract a valid email address.  (It may 
not be a working email address, but it should at least be legal.)

One thing I should probably make clearer in the documentation is that due 
to the way Gambas uses character constants like \n, you need to double up 
on backslashes when you're specifying a regular expression as a constant.  
So if the user is entering it or you're reading it from a file, it might 
be a\s+(b\S+) but if you're hardcoding it into your program it needs to 
be a\\s+(b\\S+).  Here is a Gambas script to demonstrate (just tried it 
in my own console and it runs in 2.9, but watch out for my email client's 
word wrap.)

USE gb.pcre

DIM myemail AS String
DIM validemail AS String
DIM re AS RegExp

myemail = f...@bar 

re = new RegExp(myemail, (?i)\\b[a-z0-9\\._%\\...@[a-z0-9._%\\-]+\\.[a-z]
{2,4}\\b)
validemail = re.Text
if not validemail then
print myemail   is not a legal email address.\n
else
print myemail  \n
end if

Rob

--
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Help using gb.pcre

[David Villalobos Cambronero]

Thanks Jesus I really appreciate your help.

 Regards


--
David



- Original Message 
From: Jesus Guardon jguar...@telefonica.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Tuesday, March 10, 2009 3:10:02 PM
Subject: Re: [Gambas-user] Help using gb.pcre

Hi David

This is what I did:

PUBLIC FUNCTION chkEmail(sEmail AS String) AS Boolean

  DIM bMail AS Boolean
  DIM regx as Regexp

  IF sEmail THEN

regx =
NEW Regexp(sEmail,(?i)\b[a-z0-9._%\...@[a-z0-9._%\-]+\.[a-z]{2,4}\b)

   IF regx.Text THEN
  'DEBUG regx.Text
   bMail = TRUE
   ELSE
   bMail = FALSE

   ENDIF
  ENDIF

 RETURN bMail

END

I your text matches, it will return true.

Sorry for ugly indentation due to plain text formatting email.

Jesus

David Villalobos Cambronero escribió:
 Hi, I need to match some regular expresions, I think I can use Gambas to do 
 it, in the documentation says somethig like this:
 
 
 (?i)\b[a-z0-9._%\...@[a-z0-9._%\-]+\.[a-z]{2,4}\b
 
 
 But how can I use it, any idea? 
 
 Any help need thanks.
 Regards
 
 
 --
 David
 
 
 
  
 
 --
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user
 


--
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Gambas 2 - Gambas 3

[David Villalobos Cambronero]

Here is mine:

[r...@david david]# pkg-config --cflags qt-mt
-DQT_SHARED -DQT_NO_DEBUG -DQT_THREAD_SUPPORT -D_REENTRANT 
-I/usr/lib/qt3//include

[r...@david david]# pkg-config --libs-only-l qt-mt
-lqt-mt -lmng -ljpeg -lpng -lz -lXrender -lXrandr -lXcursor -lXinerama -lXft 
-lfreetype -lfontconfig -lXext -lX11 -lm -lSM -lICE -ldl -lpthread

[r...@david david]# pkg-config --libs-only-L qt-mt
-L/usr/lib/qt3/lib64

[r...@david david]# pkg-config --libs-only-other qt-mt

--- NO OUTPUT ---


 Regards


--
David



- Original Message 
From: Ron_1st ron...@tiscali.nl
To: gambas-user@lists.sourceforge.net
Sent: Wednesday, February 18, 2009 6:36:48 PM
Subject: Re: [Gambas-user] Gambas 2 - Gambas 3

On Thursday 19 February 2009, Benoît Minisini wrote:
 $ pkg-config --cflags qt-mt
 $ pkg-config --libs-only-l qt-mt
 $ pkg-config --libs-only-L qt-mt 
 $ pkg-config --libs-only-other qt-mt
 
 If, of course, your qt development package uses the pkg-config system!
 
 Thanks in advance.
 

r...@terminator:~# pkg-config --cflags qt-mt
-DQT_SHARED -DQT_TABLET_SUPPORT -DQT_THREAD_SUPPORT -D_REENTRANT 
-I/usr/include/qt3

r...@terminator:~# pkg-config --libs-only-l qt-mt
-lqt-mt -laudio -lXt -ljpeg -lpng -lz -lXi -lXrender -lXrandr -lXcursor 
-lXinerama -lXft -lfreetype -lfontconfig -lXext -lX11 -lm -lSM -lICE -ldl 
-lpthread
(^^^all on one line^^^)

r...@terminator:~# pkg-config --libs-only-L qt-mt
-L/usr/X11R6/lib

r...@terminator:~# pkg-config --libs-only-other qt-mt

(^^^ empty^^^)


/usr/include/qt3 exists and contains theqt3  *.h files


Best regards,

Ron_1st

-- 


--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Gambas 2 - Gambas 3

[David Villalobos Cambronero]

  
Hi, it happened to me some day ago,
there is what I did to fix it.
# ln -s /usr/lib/qt3/lib64/libqt-mt.so.3.3.8 /usr/lib64/libqt-mt.so.3.3.8
# ln -s /usr/lib/qt3/lib64/libqt-mt.so.3.3.8 /usr/lib64/libqt-mt.so.3.3
# ln -s /usr/lib/qt3/lib64/libqt-mt.so.3.3.8 /usr/lib64/libqt-mt.so.3
# ln -s /usr/lib/qt3/lib64/libqt-mt.so.3.3.8 /usr/lib64/libqt-mt.so

  
And just be aware that my system is 64
Bits.

By the way, I agree with Ron. I my case Gambas 3
compiles fine, but suddenly it crash in the make process telling me
the problem about qt-mt, I try to fin the lib with kfind and realize
that libqt-mt was unaccessible, could be Gambas involved?

Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, February 18, 2009 8:37:38 AM
Subject: Re: [Gambas-user] Gambas 2 - Gambas 3

 On Wednesday 18 February 2009, Benoît Minisini wrote:
   Benoit,
  
   I trying to compile and install Gambas 3 from the svn trunk and I have
   the same problem
   like Rolf.
  
   When I start the compilation by:  make=  I have the same
   error on :  cannot find -lqt-mt
  
   I tryed to compile Gambas 3 on Fedora 7 and Fedora 10, and the both
   case I have the same problem.
  
   I verify the library and all it's ok: on Fedora 10
  
   [r...@linusky ~]# ls -l /usr/lib/qt-3.3/lib/
   total 19380
   -rw-r--r-- 1 root root 7897526 oct.  8 15:19 libdesignercore.a
   -rw-r--r-- 1 root root1050 oct.  8 15:18 libdesignercore.prl
   -rw-r--r-- 1 root root  509178 oct.  8 15:19 libeditor.a
   -rw-r--r-- 1 root root 956 oct.  8 15:18 libeditor.prl
   -rw-r--r-- 1 root root   41204 oct.  8 15:19 libqassistantclient.a
   -rw-r--r-- 1 root root 967 oct.  8 15:18 libqassistantclient.prl
   lrwxrwxrwx 1 root root  15 déc.  5 02:24 libqsa.so - libqsa.so.
   1.1.4
   lrwxrwxrwx 1 root root  15 déc.  5 02:20 libqsa.so.1 - libqsa.so.
   1.1.4
   lrwxrwxrwx 1 root root  15 déc.  5 02:20 libqsa.so.1.1 -
   libqsa.so.1.1.4
   -rwxr-xr-x 1 root root 2106324 mars 25  2008 libqsa.so.1.1.4
   -rw-r--r-- 1 root root 964 oct.  8 15:18 libqt-mt.prl
   lrwxrwxrwx 1 root root  17 déc.  5 13:06 libqt-mt.so - libqt-
   mt.so.3.3.8
   lrwxrwxrwx 1 root root  17 déc.  5 12:38 libqt-mt.so.3 - libqt-
   mt.so.3.3.8
   lrwxrwxrwx 1 root root  17 déc.  5 12:38 libqt-mt.so.3.3 - libqt-
   mt.so.3.3.8
   -rwxr-xr-x 1 root root 8880140 oct.  8 15:19 libqt-mt.so.3.3.8
   -rw-r--r-- 1 root root 852 oct.  8 15:18 libqui.prl
   lrwxrwxrwx 1 root root  15 déc.  5 13:06 libqui.so - libqui.so.
   1.0.0
   lrwxrwxrwx 1 root root  15 déc.  5 12:38 libqui.so.1 - libqui.so.
   1.0.0
   lrwxrwxrwx 1 root root  15 déc.  5 12:38 libqui.so.1.0 -
   libqui.so.1.0.0
   -rwxr-xr-x 1 root root  255332 oct.  8 15:19 libqui.so.1.0.0
  
  
  
   Olivier Cruilles
   Mail: linu...@club-internet.fr
 
  If Redhat puts the Qt library in a strange place, maybe the configure
  script cannot find it. And if nobody posts the output of configure,
  fixing that is hard!

 From the problems I have it did look to me something with qt was failing.
 In the configure there is/was no mention about qt-mt
 but in the log from 'make' it occurs on some parts related to gb.gt.
 I did give you those logs also the ones from make install with the -v flag
 for the gbi calls.
 I commented even the place in that special log where the gbi -v was
 aborted. Never got a hint from that action you requested me to do with -v
 flag.

 It may be not exact the same problem but strong related in my view
 by reading my log files line by line.

 The compare for diffs between kubuntu8.04 - kubuntu-8.10 and your mandrake
 was interesting but not effective.
 However we din never look to where the diffs where for the qt libs and
 that is interesting to.
 kubuntu 8.04 based on qt3 kde3
 kubuntu 8.10 based on qt4 kde4

 I did see in the 'make' log references for gcc for lib paths  to lib/qt4

 Attached the result for 'locate qt3' (removed the /user/share/doc lines)

 So I did give up, live goes on for you and me.


 r...@terminator:~$ locate libqt-mt

 pclinux-2007 mounted at /mnt/sda2

 /mnt/sda2/usr/lib/qt3/lib/libqt-mt.la
 /mnt/sda2/usr/lib/qt3/lib/libqt-mt.prl
 /mnt/sda2/usr/lib/qt3/lib/libqt-mt.so.3
 /mnt/sda2/usr/lib/qt3/lib/libqt-mt.so.3.3
 /mnt/sda2/usr/lib/qt3/lib/libqt-mt.so.3.3.8


 kubuntu-8.04

 /usr/lib/libqt-mt.la
 /usr/lib/libqt-mt.prl
 /usr/lib/libqt-mt.so
 /usr/lib/libqt-mt.so.3
 /usr/lib/libqt-mt.so.3.3
 /usr/lib/libqt-mt.so.3.3.8
 /usr/share/qt3/lib/libqt-mt.la
 /usr/share/qt3/lib/libqt-mt.prl
 /usr/share/qt3/lib/libqt-mt.so
 /usr/share/qt3/lib/libqt-mt.so.3
 /usr/share/qt3/lib/libqt-mt.so.3.3



 Best regards,

 Ron_1st

Do you know why there is libqt-mt.so.3.* at two different places on your 
system? (/usr/lib and /usr/share/qt3/lib)

-- 
Benoît

Re: [Gambas-user] Gambas 2 - Gambas 3

[David Villalobos Cambronero]

Hi, here is mine. It is located in /usr/lib/qt3/lib64/
 Regards


--
David



- Original Message 
From: Benoît Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, February 18, 2009 1:00:22 PM
Subject: Re: [Gambas-user] Gambas 2 - Gambas 3

 Hi, it happened to me some day ago,
 there is what I did to fix it.
 # ln -s /usr/lib/qt3/lib64/libqt-mt.so.3.3.8 /usr/lib64/libqt-mt.so.3.3.8
 # ln -s /usr/lib/qt3/lib64/libqt-mt.so.3.3.8 /usr/lib64/libqt-mt.so.3.3
 # ln -s /usr/lib/qt3/lib64/libqt-mt.so.3.3.8 /usr/lib64/libqt-mt.so.3
 # ln -s /usr/lib/qt3/lib64/libqt-mt.so.3.3.8 /usr/lib64/libqt-mt.so


 And just be aware that my system is 64
 Bits.

 By the way, I agree with Ron. I my case Gambas 3
 compiles fine, but suddenly it crash in the make process telling me
 the problem about qt-mt, I try to fin the lib with kfind and realize
 that libqt-mt was unaccessible, could be Gambas involved?


I don't change anything to the libraries. Everything is done by the libtool 
tool.

libtool works by using the contents of the *.la files to know what flags 
should be sent to the linker. Sometimes, the *.la files provided by the 
distribution are false (it happened once on an old Mandriva, and it happens 
recently on Ubuntu).

Can you (David  Ron) post the contents of your libqt-mt.la files?

-- 
Benoît

--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

libqt-mt.la
Description: Binary data
--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Error compiling 3-1802

[David Villalobos Cambronero]

Hi I got these error when compile Gambas 3 rv 1802 on Mandriva 2008.1 64 Bits, 
I'm missing some lib?

/usr/bin/ld: cannot find -lqt-mt
collect2: ld returned 1 exit status
make[5]: *** [gb.qt.kde.html.la] Error 1
make[5]: se sale del directorio `/home/david/Gambas/trunk/gb.qt.kde/src/html'
make[4]: *** [all-recursive] Error 1
make[4]: se sale del directorio `/home/david/Gambas/trunk/gb.qt.kde/src'
make[3]: *** [all-recursive] Error 1
make[3]: se sale del directorio `/home/david/Gambas/trunk/gb.qt.kde'
make[2]: *** [all] Error 2
make[2]: se sale del directorio `/home/david/Gambas/trunk/gb.qt.kde'
make[1]: *** [all-recursive] Error 1
make[1]: se sale del directorio `/home/david/Gambas/trunk'
make: *** [all] Error 2


 Best Regards


--
David



  

--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Error on gb.db.mysql: Commands out of sync; you can't run this command now

[David Villalobos Cambronero]

Sure, here it is:

mysql: 0x7b3680: CALL `sp_Procedimientos`
mysql: 0x7b3680: CALL `sp_Tablas`


And it fails on the second CALL, showing the messasage I sent you.

Atacched the code form my form.


Reagards


--
David



- Original Message 
From: Benoit Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, January 14, 2009 5:39:12 PM
Subject: Re: [Gambas-user] Error on gb.db.mysql: Commands out of sync; you 
can't run this command now

On lundi 12 janvier 2009, David Villalobos Cambronero wrote:
 Not sure... but what I know for sure is that is not in my Gambas part.
 Attached is an example using only gb.db

  I try to take a look in the C part, but I couldn't find anything.

 Attached is the entire script for my database, and an example.

 I you connect directly to mysql and execute the last tow statements they
 work, so I think it is a bug in the C part.


 MySQL says:


 If you get Commands out of sync; you can't run this command now in your
 client code, you are calling client functions in the wrong order. This can
 happen, for example, if you are using mysql_use_result() and try to execute
 a new query before you have called mysql_free_result(). It can also happen
 if you try to execute two queries that return data without calling
 mysql_use_result() or mysql_store_result() in between. Best Regards


 --
 David


Can you make the dump of all mysql requests sent by using DB.Debug = TRUE ?

-- 
Benoit Minisini

--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

FRMPermisos.form
Description: Binary data


FRMPermisos.class
Description: application/java-vm
--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Error on gb.db.mysql: Commands out of sync; you can't run this command now

[David Villalobos Cambronero]

No, it is handled in the same way, since if you execute both statements in the 
mysql console, they run perfectly.

But let me check some thing, what I will do is to try to understand your code, 
if I don't know something I will ask you.

 Regards


--
David



- Original Message 
From: Benoit Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Thursday, January 15, 2009 8:02:09 AM
Subject: Re: [Gambas-user] Error on gb.db.mysql: Commands out of sync; you 
can't run this command now

On jeudi 15 janvier 2009, David Villalobos Cambronero wrote:
 Sure, here it is:

 mysql: 0x7b3680: CALL `sp_Procedimientos`
 mysql: 0x7b3680: CALL `sp_Tablas`


 And it fails on the second CALL, showing the messasage I sent you.

 Atacched the code form my form.


 Reagards


 --
 David


Does the 'CALL' MySQL instruction need to be handled in a different way than 
all other requests? Apparently it does!

-- 
Benoit Minisini

--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Error on gb.db.mysql: Commands out of sync; you can't run this command now

[David Villalobos Cambronero]

Here is a background:

http://dev.mysql.com/doc/refman/5.0/en/mysql-use-result.html

Please tell me what do you think...


 Regards


--
David



- Original Message 
From: Benoit Minisini gam...@users.sourceforge.net
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Thursday, January 15, 2009 8:02:09 AM
Subject: Re: [Gambas-user] Error on gb.db.mysql: Commands out of sync; you 
can't run this command now

On jeudi 15 janvier 2009, David Villalobos Cambronero wrote:
 Sure, here it is:

 mysql: 0x7b3680: CALL `sp_Procedimientos`
 mysql: 0x7b3680: CALL `sp_Tablas`


 And it fails on the second CALL, showing the messasage I sent you.

 Atacched the code form my form.


 Reagards


 --
 David


Does the 'CALL' MySQL instruction need to be handled in a different way than 
all other requests? Apparently it does!

-- 
Benoit Minisini

--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Error on gb.db.mysql: Commands out of sync; you can't run this command now

[David Villalobos Cambronero]

Hi Benoit, did you have time to take a look at this?

 Regards


--
David



- Original Message 
From: David Villalobos Cambronero david_villalobo...@yahoo.com
To: Gambas Inglés gambas-user@lists.sourceforge.net
Sent: Friday, January 2, 2009 10:09:23 AM
Subject: Error on gb.db.mysql: Commands out of sync; you can't run this command 
now

Hi Benoit  All,

I think I found an error en the gb.db.mysql component. It is related with this 
error message: Commands out of sync; you can't run this command now.

See the attached example

See the following link:

http://dev.mysql.com/doc/refman/5.0/en/commands-out-of-sync.html

Mandriva 2009.1 64 Bits  KDE  mysql 5.0.51a  Gambas 3 r1745

Best regards

David


  

Error.MySQL-0.0.1.tar.gz
Description: GNU Zip compressed data
--
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about anything Open Source.
http://p.sf.net/sfu/Xq1LFB___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Error on gb.db.mysql: Commands out of sync; you can't run this command now

[David Villalobos Cambronero]

Hi Benoit  All,

I think I found an error en the gb.db.mysql component. It is related with this 
error message: Commands out of sync; you can't run this command now.

See the attached example

See the following link:

http://dev.mysql.com/doc/refman/5.0/en/commands-out-of-sync.html

Mandriva 2009.1 64 Bits  KDE  mysql 5.0.51a  Gambas 3 r1745

Best regards

David


  

Error.MySQL-0.0.1.tar.gz
Description: GNU Zip compressed data
--
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Action managment

[David Villalobos Cambronero]

Well, I have been working in this project: http://code.google.com/p/mysql-gui/ 
what I need I my class to raise the Action_Activate event, I inherit Window to 
my class and it works fine.

 Regards


--
David



- Original Message 
From: Benoit Minisini [EMAIL PROTECTED]
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Friday, December 5, 2008 6:38:28 AM
Subject: Re: [Gambas-user] Action managment

On mercredi 3 décembre 2008, David Villalobos Cambronero wrote:
 Hi all, I have a problem using Actions. That is what I got:

 I have a form let's call it FMain, in this form I have a work space that I
 use to emmbed some others form, Let's suppose I emmbed a form in this work
 space, let's call it Form2, in this form, I insert a class, this class has
 some controls with actions, so at the end we have, two forms and one class:
 FMain::Form2::class, all of them has the Action_Activate procedure, but the
 Actions of the class are intersepted by the parent, in this case: Form2.

 How can I make my class to intersept his own Actions?

  Regards


 --
 David


At the moment only classes that inherit Window can have an Action_Activate 
procedure.

Can you explain exactly what your goal is?

-- 
Benoit Minisini

--
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you.  Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

--
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you.  Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Action managment

[David Villalobos Cambronero]

Hi all, I have a problem using Actions. That is what I got:

I have a form let's call it FMain, in this form I have a work space that I use 
to emmbed some others form, Let's suppose I emmbed a form in this work space, 
let's call it Form2, in this form, I insert a class, this class has some 
controls with actions, so at the end we have, two forms and one class: 
FMain::Form2::class, all of them has the Action_Activate procedure, but the 
Actions of the class are intersepted by the parent, in this case: Form2.

How can I make my class to intersept his own Actions?

 Regards


--
David



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Gambas3 looks strange in Mandriva 2009.0

[David Villalobos Cambronero]

M nop, I use KDE, don't like GTK. I installed Gambas as always do, is there 
a clue to install Gambas 3 in Mandriva 2009.0, or what can we do to ensure I'm 
doing the correct thing?

 Regards.


--
David



- Original Message 
From: Benoit Minisini [EMAIL PROTECTED]
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Tuesday, November 25, 2008 7:57:27 PM
Subject: Re: [Gambas-user] Gambas3 looks strange in Mandriva 2009.0

On mercredi 26 novembre 2008, David Villalobos Cambronero wrote:
 Hi all, I have installed Gambas 3 in my Mandriva 2009, but it looks very
 strange (attached some screen shots), does anybody knows why? Or I'm doing
 something wrong?

  Regards


 --
 David

I suppose you don't use KDE, so the QT library uses its default widget theme 
and colors?

-- 
Benoit Minisini

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Autocomplete

[David Villalobos Cambronero]

Hi, many thanks... It really helps

 Regards


--
David



- Original Message 
From: Benoit Minisini [EMAIL PROTECTED]
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, October 8, 2008 12:00:35 PM
Subject: Re: [Gambas-user] Autocomplete

On mercredi 08 octobre 2008, David Villalobos Cambronero wrote:
 Ok, I'll try.

 I got an Editor to hinglight MySQL Keywords, but I want that when the user
 types INS shows a box with some words like INSERT, just as Gambas does.

 In Gambas if you  write PRI then appears a box with PRIVATE and some other
 Gambas Keywords. That is what I want to do.

 Hope I was clear enough.

  Regards


 --
 David


I mainly display a ListView on top of the Editor control. Editor has methods 
to know where the cursor is so that you can move the ListView just under it. 

You can look in the IDE source code to have the details. But it is complex, as 
it supports different auto-completions: class symbols, event handlers, 
keywords, identifiers, special methods.

Regards,

-- 
Benoit Minisini

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] gb.db

[David Villalobos Cambronero]

Hi, maybe use gb.db.mysql.

 Regards


--
David



- Original Message 
From: Kari Laine [EMAIL PROTECTED]
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, October 8, 2008 10:30:08 AM
Subject: [Gambas-user] gb.db

Hi,

I am writing a test program and I am little stuck with the big fields in
gb.db. Could someone tell me please?

what type I define to use the following MySQL fields?

VARCHAR(*M*), VARBINARY(*M*) *L* + 1 bytes if column values require 0 – 255
bytes, *L* + 2 bytes if values may require more than 255 bytes
TINYBLOB, TINYTEXT *L* + 1 bytes, where *L*  28 BLOB, TEXT *L* + 2 bytes,
where *L*  216
MEDIUMBLOB, MEDIUMTEXT *L* + 3 bytes, where *L*  224
LONGBLOB, LONGTEXT *L* + 4 bytes, where *L*  232



Best Regards
Kari Laine
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Autocomplete

[David Villalobos Cambronero]

Hi, Benoit, how did you implement the autocomplete feature?

Any idea?

 Regards.


--
David



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Autocomplete

[David Villalobos Cambronero]

Ok, I'll try.

I got an Editor to hinglight MySQL Keywords, but I want that when the user 
types INS shows a box with some words like INSERT, just as Gambas does.

In Gambas if you  write PRI then appears a box with PRIVATE and some other 
Gambas Keywords. That is what I want to do.

Hope I was clear enough.

 Regards


--
David



- Original Message 
From: Benoit Minisini [EMAIL PROTECTED]
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Wednesday, October 8, 2008 11:36:52 AM
Subject: Re: [Gambas-user] Autocomplete

On mercredi 08 octobre 2008, David Villalobos Cambronero wrote:
 Hi, Benoit, how did you implement the autocomplete feature?

 Any idea?

  Regards.


 --
 David


Maybe you could ask a less general question? Otherwise I can answer elbow 
grease :-)

-- 
Benoit Minisini

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Bleh

[David Villalobos Cambronero]

Maybe we should find another host?

 Regards


--
David



- Original Message 
From: Benoit Minisini [EMAIL PROTECTED]
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Friday, October 3, 2008 10:20:59 AM
Subject: Re: [Gambas-user] Bleh

On vendredi 03 octobre 2008, Ron wrote:
 Have sent several mails in last days to this list, they simple don't
 show up.
 I hate that, waste of time.


I have a similar problem, but with the sourceforge commits mailing-list. Some 
commits are never emitted. Sourceforge infrastructure is not very reliable.

-- 
Benoit Minisini

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

[Gambas-user] Catching ,messages in gb.db

[David Villalobos Cambronero]

Hi all,

If I made DB.Debug = True, then all statements executed by the component will 
be sent the standard error output, but I need to save those messages into a 
file, I tried to redirect the error output but I couldn't, any help?


 Best regards


--
David



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Catching ,messages in gb.db

[David Villalobos Cambronero]

No, let see, if I set DB.Debug = True, then all messages from gb.db will be 
sent automatically to the the standard error output, I want to tell Gambas that 
the standard error output is a file, I read something about ERROR TO Stream, 
but couldn't get it, any idea?

 Regards


--
David



- Original Message 
From: Benoit Minisini [EMAIL PROTECTED]
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Saturday, September 20, 2008 8:53:14 AM
Subject: Re: [Gambas-user] Catching ,messages in gb.db

On samedi 20 septembre 2008, David Villalobos Cambronero wrote:
 Hi all,

 If I made DB.Debug = True, then all statements executed by the component
 will be sent the standard error output, but I need to save those messages
 into a file, I tried to redirect the error output but I couldn't, any help?


  Best regards


 --
 David


You should be able to do that with 21 in a shell. What's the problem with 
that?

-- 
Benoit Minisini

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Catching ,messages in gb.db

[David Villalobos Cambronero]

Ok, thanks, I use file, instead of stream... maybe that's why...

 Regards


--
David



- Original Message 
From: Laurent Carlier [EMAIL PROTECTED]
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Saturday, September 20, 2008 12:36:58 PM
Subject: Re: [Gambas-user] Catching ,messages in gb.db

Le samedi 20 septembre 2008 20:06:14 David Villalobos Cambronero, vous avez 
écrit :
 No, let see, if I set DB.Debug = True, then all messages from gb.db will be
 sent automatically to the the standard error output, I want to tell Gambas
 that the standard error output is a file, I read something about ERROR TO
 Stream, but couldn't get it, any idea?

  Regards


DIM dberrs AS Stream
-
dberrs = OPEN dboutput AS WRITE
ERROR TO dberrs
--
CLOSE dboutput

??



-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user

Re: [Gambas-user] Dinamic Arrays in Gambas

[David Villalobos Cambronero]

Ohhh that's great...

 ---


David



- Original Message 
From: Stefano Palmeri [EMAIL PROTECTED]
To: mailing list for gambas users gambas-user@lists.sourceforge.net
Sent: Thursday, July 17, 2008 1:54:33 PM
Subject: Re: [Gambas-user] Dinamic Arrays in Gambas

Il giovedì 17 luglio 2008 15:34:10 David Villalobos Cambronero ha scritto:
 Hi all,

 How can I get a dinamic array with more than one dimension.

 I my program I need to create at execution time a dinamic array, in
 example:

 1 - I will ask the user how many rows.
 2 - I will ask the user how many columns.
 3 - With this info I need to create an array.

 I know there is String[], Integer[], but how can I get more dimensions.

 Best regards

 David


This a bidimensional 10x10 array of strings.


  DIM arsMyStrings AS String[]
  
  arsMyStrings = NEW String[10, 10]
  
  arsMyStrings[0, 0] = hello
  
  PRINT arsMyStrings[0, 0]


Bye,

Stefano








 -
 This SF.Net email is sponsored by the Moblin Your Move Developer's
 challenge Build the coolest Linux based applications with Moblin SDK  win
 great prizes Grand prize is a trip for two to an Open Source event anywhere
 in the world http://moblin-contest.org/redirect.php?banner_id=100url=/
 ___
 Gambas-user mailing list
 Gambas-user@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user



  

-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK  win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100url=/
___
Gambas-user mailing list
Gambas-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gambas-user