Re: [Ganglia-general] Additional Bars
I would imagine if you are missing library dependencies rrdtool will not work. Try executing rrdtool by hand. Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: Hi Vladimir, After installing the rrdtool 1.3.9, all my graphs disappeared. There were errors installing the pango rpm so I removed and installed libgcc and libffi rpm, but still got the same errors after the install of the pango rpm. Would these be the cause of my graphs disappearing? Can this be fixed? Thanks. #: rpm -Uvh libgcc-4.7.2-1.aix7.1.ppc.rpm libgcc ## #: rpm -Uvh libffi-3.0.11-1.aix5.1.ppc.rpm libffi ## rpm -Uvh pango-1.24.5-1.aix5.1.ppc.rpm pango ## Could not load program /opt/freeware/bin/pango-querymodules: Could not load module /opt/freeware/lib/libgobject-2.0.a(libgobject-2.0.so.0). Dependent module libffi.a(libffi.so.5) could not be loaded. Could not load module libffi.a(libffi.so.5). System error: No such file or directory Could not load module pango-querymodules. Dependent module /opt/freeware/lib/libgobject-2.0.a(libgobject-2.0.so.0) could not be loaded. Could not load module . execution of pango-1.24.5-1 script failed, exit status 255 Ghassan From: Vladimir Vuksan vli...@veus.hr To: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 12:11 PM Subject:Re: [Ganglia-general] Additional Bars I'm afraid you'll have to update all those too. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I have to upgrade the following files as well. Do I need to do that or I can just use the --nodeps parameter? Ghassan #: rpm -Uvh rrdtool-1.3.9-1.aix5.1.ppc.rpm cairo = 1.8.8 is needed by rrdtool-1.3.9-1 freetype2 = 2.3.12 is needed by rrdtool-1.3.9-1 libart_lgpl = 2.3.20 is needed by rrdtool-1.3.9-1 libpng = 1.2.44 is needed by rrdtool-1.3.9-1 pango = 1.24.5 is needed by rrdtool-1.3.9-1 dejavu-sans-mono-fonts is needed by rrdtool-1.3.9-1 dejavu-lgc-sans-mono-fonts is needed by rrdtool-1.3.9-1 libcairo.a(libcairo.so.2) is needed by rrdtool-1.3.9-1 libpango-1.0.a(libpango-1.0.so.0) is needed by rrdtool-1.3.9-1 libpangocairo-1.0.a(libpangocairo-1.0.so.0) is needed by rrdtool-1.3.9-1 From:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To:Vladimir Vuksan vli...@veus.hr Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 11:42 AM Subject:Re: [Ganglia-general] Additional Bars _ Thank you. Do I just upgrade right on top of the 1.2.30 or there is a specific rpm command that I need to execute? Is rpm -U package_name sufficient? Ghassan From:Vladimir Vuksan vli...@veus.hr To:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 11:33 AM Subject:Re: [Ganglia-general] Additional Bars _ That could be the problem. Can you upgrade to rrdtool 1.3+. We use a lot of features from 1.3+ so things will look off if you use rrdtool 1.2. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I'm using rrdtool-1.2.30-5. Ghassan NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Additional Bars
Please see below. I thought by installing libffi and libgcc, it would install the needed libraries, but it did not. What else am I missing? Thanks. Ghassan #: rrdtool Could not load program rrdtool: Could not load module /opt/freeware/lib/libgobject-2.0.a(libgobject-2.0.so.0). Dependent module /opt/freeware/lib/libffi.a(libffi.so.5) could not be loaded. Member libffi.so.5 is not found in archive Could not load module rrdtool. Dependent module /opt/freeware/lib/libgobject-2.0.a(libgobject-2.0.so.0) could not be loaded. Could not load module . From: Vladimir Vuksan vli...@veus.hr To: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc: ganglia-general@lists.sourceforge.net Date: 10/21/2012 08:56 AM Subject:Re: [Ganglia-general] Additional Bars I would imagine if you are missing library dependencies rrdtool will not work. Try executing rrdtool by hand. Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: Hi Vladimir, After installing the rrdtool 1.3.9, all my graphs disappeared. There were errors installing the pango rpm so I removed and installed libgcc and libffi rpm, but still got the same errors after the install of the pango rpm. Would these be the cause of my graphs disappearing? Can this be fixed? Thanks. #: rpm -Uvh libgcc-4.7.2-1.aix7.1.ppc.rpm libgcc ## #: rpm -Uvh libffi-3.0.11-1.aix5.1.ppc.rpm libffi ## rpm -Uvh pango-1.24.5-1.aix5.1.ppc.rpm pango ## Could not load program /opt/freeware/bin/pango-querymodules: Could not load module /opt/freeware/lib/libgobject-2.0.a(libgobject-2.0.so.0). Dependent module libffi.a(libffi.so.5) could not be loaded. Could not load module libffi.a(libffi.so.5). System error: No such file or directory Could not load module pango-querymodules. Dependent module /opt/freeware/lib/libgobject-2.0.a(libgobject-2.0.so.0) could not be loaded. Could not load module . execution of pango-1.24.5-1 script failed, exit status 255 Ghassan From:Vladimir Vuksan vli...@veus.hr To:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 12:11 PM Subject:Re: [Ganglia-general] Additional Bars I'm afraid you'll have to update all those too. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I have to upgrade the following files as well. Do I need to do that or I can just use the --nodeps parameter? Ghassan #: rpm -Uvh rrdtool-1.3.9-1.aix5.1.ppc.rpm cairo = 1.8.8 is needed by rrdtool-1.3.9-1 freetype2 = 2.3.12 is needed by rrdtool-1.3.9-1 libart_lgpl = 2.3.20 is needed by rrdtool-1.3.9-1 libpng = 1.2.44 is needed by rrdtool-1.3.9-1 pango = 1.24.5 is needed by rrdtool-1.3.9-1 dejavu-sans-mono-fonts is needed by rrdtool-1.3.9-1 dejavu-lgc-sans-mono-fonts is needed by rrdtool-1.3.9-1 libcairo.a(libcairo.so.2) is needed by rrdtool-1.3.9-1 libpango-1.0.a(libpango-1.0.so.0) is needed by rrdtool-1.3.9-1 libpangocairo-1.0.a(libpangocairo-1.0.so.0) is needed by rrdtool-1.3.9-1 From:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To:Vladimir Vuksan vli...@veus.hr Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 11:42 AM Subject:Re: [Ganglia-general] Additional Bars _ Thank you. Do I just upgrade right on top of the 1.2.30 or there is a specific rpm command that I need to execute? Is rpm -U package_name sufficient? Ghassan From:Vladimir Vuksan vli...@veus.hr To:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 11:33 AM Subject:Re: [Ganglia-general] Additional Bars _ That could be the problem. Can you upgrade to rrdtool 1.3+. We use a lot of features from 1.3+ so things will look off if you use rrdtool 1.2. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I'm using rrdtool-1.2.30-5. Ghassan NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http
Re: [Ganglia-general] Additional Bars
Hi Vladimir, After installing the rrdtool 1.3.9, all my graphs disappeared. There were errors installing the pango rpm so I removed and installed libgcc and libffi rpm, but still got the same errors after the install of the pango rpm. Would these be the cause of my graphs disappearing? Can this be fixed? Thanks. #: rpm -Uvh libgcc-4.7.2-1.aix7.1.ppc.rpm libgcc ## #: rpm -Uvh libffi-3.0.11-1.aix5.1.ppc.rpm libffi ## rpm -Uvh pango-1.24.5-1.aix5.1.ppc.rpm pango ## Could not load program /opt/freeware/bin/pango-querymodules: Could not load module /opt/freeware/lib/libgobject-2.0.a(libgobject-2.0.so.0). Dependent module libffi.a(libffi.so.5) could not be loaded. Could not load module libffi.a(libffi.so.5). System error: No such file or directory Could not load module pango-querymodules. Dependent module /opt/freeware/lib/libgobject-2.0.a(libgobject-2.0.so.0) could not be loaded. Could not load module . execution of pango-1.24.5-1 script failed, exit status 255 Ghassan From: Vladimir Vuksan vli...@veus.hr To: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 12:11 PM Subject:Re: [Ganglia-general] Additional Bars I'm afraid you'll have to update all those too. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I have to upgrade the following files as well. Do I need to do that or I can just use the --nodeps parameter? Ghassan #: rpm -Uvh rrdtool-1.3.9-1.aix5.1.ppc.rpm cairo = 1.8.8 is needed by rrdtool-1.3.9-1 freetype2 = 2.3.12 is needed by rrdtool-1.3.9-1 libart_lgpl = 2.3.20 is needed by rrdtool-1.3.9-1 libpng = 1.2.44 is needed by rrdtool-1.3.9-1 pango = 1.24.5 is needed by rrdtool-1.3.9-1 dejavu-sans-mono-fonts is needed by rrdtool-1.3.9-1 dejavu-lgc-sans-mono-fonts is needed by rrdtool-1.3.9-1 libcairo.a(libcairo.so.2) is needed by rrdtool-1.3.9-1 libpango-1.0.a(libpango-1.0.so.0) is needed by rrdtool-1.3.9-1 libpangocairo-1.0.a(libpangocairo-1.0.so.0) is needed by rrdtool-1.3.9-1 From:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To:Vladimir Vuksan vli...@veus.hr Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 11:42 AM Subject:Re: [Ganglia-general] Additional Bars _ Thank you. Do I just upgrade right on top of the 1.2.30 or there is a specific rpm command that I need to execute? Is rpm -U package_name sufficient? Ghassan From:Vladimir Vuksan vli...@veus.hr To:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 11:33 AM Subject:Re: [Ganglia-general] Additional Bars _ That could be the problem. Can you upgrade to rrdtool 1.3+. We use a lot of features from 1.3+ so things will look off if you use rrdtool 1.2. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I'm using rrdtool-1.2.30-5. Ghassan NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org-- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Additional Bars
What RRDtool version are you running ? Also please click on the broken image ie. open it in a new window. Then append debug=5 to the URL. It should give you the rrdtool command it's attempting to execute. Try to run it on the command line. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: Please see below screen shot. Also, attached is the log since this issue started to happen. Thanks. Perhaps you can post a screenshot. Also check Apache error logs when you access that URL Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To: Mark Wagner mwag...@intelius.com Cc: ganglia-general@lists.sourceforge.net Date: 10/18/2012 11:39 AM Subject: Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Mark Wagner mwag...@intelius.com To: ganglia-general@lists.sourceforge.net Date: 10/17/2012 07:46 PM Subject: Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ For the logo, with version 3.5.3 of ganglia-web (and possibly others) you can create create templates/default/user_header.tpl which gets pulled in by templates/default/header.tpl like so right at the start of the body: /head body style=background-color: #ff; onunload=g_refresh_timer=null {if isset($user_header)} {include(file=user_header.tpl)} {/if} On 10/17/2012 03:05 PM, Ghassan Elnajjar wrote: Has anyone added their own custom logo, i.e. company logo, to their ganglia web? Are their any instructions on how to do this? Also, does anyone know how to change the Utilization Heatmap to a pie chart? Thank you. Ghassan NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Additional Bars
Below is the command it gave me and the result when I run it. Ghassan /usr/bin/rrdtool graph - --start '-3600s' --end now --width 1200 --height 600 --title 'nimrod1 Load last hour' --vertical-label 'Loads/Procs' --lower-limit 0 --slope-mode DEF:'a0'='/var/lib/ganglia/rrds/P7-QTS/nimrod1/load_one.rrd':'sum':AVERAGE DEF:'a2'='/var/lib/ganglia/rrds/P7-QTS/nimrod1/cpu_num.rrd':'sum':AVERAGE DEF:'a3'='/var/lib/ganglia/rrds/P7-QTS/nimrod1/proc_run.rrd':'sum':AVERAGE CDEF:'total'=a0,a2,ADDNAN,a3,ADDNAN, AREA:'a0'#BB:'1-min' VDEF:a0_last=a0,LAST VDEF:a0_min=a0,MINIMUM VDEF:a0_avg=a0,AVERAGE VDEF:a0_max=a0,MAXIMUM GPRINT:'a0_last':'Now\:%5.1lf%s' GPRINT:'a0_min':'Min\:%5.1lf%s' GPRINT:'a0_avg':'Avg\:%5.1lf%s' GPRINT:'a0_max':'Max\:%5.1lf%s\l' LINE2:'a2'#FF:'CPUs ' VDEF:a2_last=a2,LAST VDEF:a2_min=a2,MINIMUM VDEF:a2_avg=a2,AVERAGE VDEF:a2_max=a2,MAXIMUM GPRINT:'a2_last':'Now\:%5.1lf%s' GPRINT:'a2_min':'Min\:%5.1lf%s' GPRINT:'a2_avg':'Avg\:%5.1lf%s' GPRINT:'a2_max':'Max\:%5.1lf%s\l' LINE2:'a3'#2030F4:'Procs' VDEF:a3_last=a3,LAST VDEF:a3_min=a3,MINIMUM VDEF:a3_avg=a3,AVERAGE VDEF:a3_max=a3,MAXIMUM GPRINT:'a3_last':'Now\:%5.1lf%s' GPRINT:'a3_min':'Min\:%5.1lf%s' GPRINT:'a3_avg':'Avg\:%5.1lf%s' GPRINT:'a3_max':'Max\:%5.1lf%s\l' ERROR: invalid rpn expression in: a0,a2,ADDNAN,a3,ADDNAN, Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Vladimir Vuksan vli...@veus.hr To: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 10:49 AM Subject:Re: [Ganglia-general] Additional Bars What RRDtool version are you running ? Also please click on the broken image ie. open it in a new window. Then append debug=5 to the URL. It should give you the rrdtool command it's attempting to execute. Try to run it on the command line. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: Please see below screen shot. Also, attached is the log since this issue started to happen. Thanks. Perhaps you can post a screenshot. Also check Apache error logs when you access that URL Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To:Mark Wagner mwag...@intelius.com Cc:ganglia-general@lists.sourceforge.net Date:10/18/2012 11:39 AM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Mark Wagner mwag...@intelius.com To:ganglia-general@lists.sourceforge.net Date:10/17/2012 07:46 PM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ For the logo, with version 3.5.3 of ganglia-web (and possibly others) you can create create templates/default/user_header.tpl which gets pulled in by templates/default/header.tpl like so right at the start of the body: /head body style=background-color: #ff; onunload=g_refresh_timer=null {if isset($user_header)} {include(file=user_header.tpl)} {/if} On 10/17/2012 03:05 PM, Ghassan Elnajjar wrote: Has anyone added their own custom logo, i.e. company logo, to their ganglia web? Are their any instructions on how to do this? Also, does anyone know how to change the Utilization Heatmap to a pie chart? Thank you. Ghassan NOTE: The information contained in this message may be privileged
Re: [Ganglia-general] Additional Bars
I'm using rrdtool-1.2.30-5. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Vladimir Vuksan vli...@veus.hr To: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 10:49 AM Subject:Re: [Ganglia-general] Additional Bars What RRDtool version are you running ? Also please click on the broken image ie. open it in a new window. Then append debug=5 to the URL. It should give you the rrdtool command it's attempting to execute. Try to run it on the command line. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: Please see below screen shot. Also, attached is the log since this issue started to happen. Thanks. Perhaps you can post a screenshot. Also check Apache error logs when you access that URL Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To:Mark Wagner mwag...@intelius.com Cc:ganglia-general@lists.sourceforge.net Date:10/18/2012 11:39 AM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Mark Wagner mwag...@intelius.com To:ganglia-general@lists.sourceforge.net Date:10/17/2012 07:46 PM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ For the logo, with version 3.5.3 of ganglia-web (and possibly others) you can create create templates/default/user_header.tpl which gets pulled in by templates/default/header.tpl like so right at the start of the body: /head body style=background-color: #ff; onunload=g_refresh_timer=null {if isset($user_header)} {include(file=user_header.tpl)} {/if} On 10/17/2012 03:05 PM, Ghassan Elnajjar wrote: Has anyone added their own custom logo, i.e. company logo, to their ganglia web? Are their any instructions on how to do this? Also, does anyone know how to change the Utilization Heatmap to a pie chart? Thank you. Ghassan NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying
Re: [Ganglia-general] Additional Bars
I'm also getting this error on the main page of the cluster where a small white box exist on the outside of each graph. When I click on this small box and run the command I get the error. /usr/bin/rrdtool graph - --start '-3600s' --end now --width 1200 --height 600 --title 'P7-QTS Cluster Load last hour' --vertical-label 'Loads/Procs' --lower-limit 0 --slope-mode DEF:'a0'='/var/lib/ganglia/rrds/P7-QTS/__SummaryInfo__/load_one.rrd':'sum':AVERAGE DEF:'a1'='/var/lib/ganglia/rrds/P7-QTS/__SummaryInfo__/cpu_num.rrd':'num':AVERAGE DEF:'a2'='/var/lib/ganglia/rrds/P7-QTS/__SummaryInfo__/cpu_num.rrd':'sum':AVERAGE DEF:'a3'='/var/lib/ganglia/rrds/P7-QTS/__SummaryInfo__/proc_run.rrd':'sum':AVERAGE CDEF:'total'=a0,a1,ADDNAN,a2,ADDNAN,a3,ADDNAN, AREA:'a0'#BB:'1-min' VDEF:a0_last=a0,LAST VDEF:a0_min=a0,MINIMUM VDEF:a0_avg=a0,AVERAGE VDEF:a0_max=a0,MAXIMUM GPRINT:'a0_last':'Now\:%5.1lf%s' GPRINT:'a0_min':'Min\:%5.1lf%s' GPRINT:'a0_avg':'Avg\:%5.1lf%s' GPRINT:'a0_max':'Max\:%5.1lf%s\l' LINE2:'a1'#00FF00:'Nodes' VDEF:a1_last=a1,LAST VDEF:a1_min=a1,MINIMUM VDEF:a1_avg=a1,AVERAGE VDEF:a1_max=a1,MAXIMUM GPRINT:'a1_last':'Now\:%5.1lf%s' GPRINT:'a1_min':'Min\:%5.1lf%s' GPRINT:'a1_avg':'Avg\:%5.1lf%s' GPRINT:'a1_max':'Max\:%5.1lf%s\l' LINE2:'a2'#FF:'CPUs ' VDEF:a2_last=a2,LAST VDEF:a2_min=a2,MINIMUM VDEF:a2_avg=a2,AVERAGE VDEF:a2_max=a2,MAXIMUM GPRINT:'a2_last':'Now\:%5.1lf%s' GPRINT:'a2_min':'Min\:%5.1lf%s' GPRINT:'a2_avg':'Avg\:%5.1lf%s' GPRINT:'a2_max':'Max\:%5.1lf%s\l' LINE2:'a3'#2030F4:'Procs' VDEF:a3_last=a3,LAST VDEF:a3_min=a3,MINIMUM VDEF:a3_avg=a3,AVERAGE VDEF:a3_max=a3,MAXIMUM GPRINT:'a3_last':'Now\:%5.1lf%s' GPRINT:'a3_min':'Min\:%5.1lf%s' GPRINT:'a3_avg':'Avg\:%5.1lf%s' GPRINT:'a3_max':'Max\:%5.1lf%s\l' ERROR: invalid rpn expression in: a0,a1,ADDNAN,a2,ADDNAN,a3,ADDNAN, Ghassan From: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To: Vladimir Vuksan vli...@veus.hr Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 11:16 AM Subject:Re: [Ganglia-general] Additional Bars I'm using rrdtool-1.2.30-5. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Vladimir Vuksan vli...@veus.hr To:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 10:49 AM Subject:Re: [Ganglia-general] Additional Bars What RRDtool version are you running ? Also please click on the broken image ie. open it in a new window. Then append debug=5 to the URL. It should give you the rrdtool command it's attempting to execute. Try to run it on the command line. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: Please see below screen shot. Also, attached is the log since this issue started to happen. Thanks. Perhaps you can post a screenshot. Also check Apache error logs when you access that URL Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To:Mark Wagner mwag...@intelius.com Cc:ganglia-general@lists.sourceforge.net Date:10/18/2012 11:39 AM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Mark Wagner mwag...@intelius.com To:ganglia-general@lists.sourceforge.net Date:10/17/2012 07:46 PM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap
Re: [Ganglia-general] Additional Bars
That could be the problem. Can you upgrade to rrdtool 1.3+. We use a lot of features from 1.3+ so things will look off if you use rrdtool 1.2. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I'm using rrdtool-1.2.30-5. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Vladimir Vuksan vli...@veus.hr To: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 10:49 AM Subject: Re: [Ganglia-general] Additional Bars _ What RRDtool version are you running ? Also please click on the broken image ie. open it in a new window. Then append debug=5 to the URL. It should give you the rrdtool command it's attempting to execute. Try to run it on the command line. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: Please see below screen shot. Also, attached is the log since this issue started to happen. Thanks. Perhaps you can post a screenshot. Also check Apache error logs when you access that URL Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To: Mark Wagner mwag...@intelius.com Cc: ganglia-general@lists.sourceforge.net Date: 10/18/2012 11:39 AM Subject: Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Mark Wagner mwag...@intelius.com To: ganglia-general@lists.sourceforge.net Date: 10/17/2012 07:46 PM Subject: Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ For the logo, with version 3.5.3 of ganglia-web (and possibly others) you can create create templates/default/user_header.tpl which gets pulled in by templates/default/header.tpl like so right at the start of the body: /head body style=background-color: #ff; onunload=g_refresh_timer=null {if isset($user_header)} {include(file=user_header.tpl)} {/if} On 10/17/2012 03:05 PM, Ghassan Elnajjar wrote: Has anyone added their own custom logo, i.e. company logo, to their ganglia web? Are their any instructions on how to do this? Also, does anyone know how to change the Utilization Heatmap to a pie chart? Thank you. Ghassan NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general NOTE: The information contained in this message may be privileged and confidential
Re: [Ganglia-general] Additional Bars
Thank you. Do I just upgrade right on top of the 1.2.30 or there is a specific rpm command that I need to execute? Is rpm -U package_name sufficient? Ghassan From: Vladimir Vuksan vli...@veus.hr To: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 11:33 AM Subject:Re: [Ganglia-general] Additional Bars That could be the problem. Can you upgrade to rrdtool 1.3+. We use a lot of features from 1.3+ so things will look off if you use rrdtool 1.2. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I'm using rrdtool-1.2.30-5. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Vladimir Vuksan vli...@veus.hr To:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 10:49 AM Subject:Re: [Ganglia-general] Additional Bars _ What RRDtool version are you running ? Also please click on the broken image ie. open it in a new window. Then append debug=5 to the URL. It should give you the rrdtool command it's attempting to execute. Try to run it on the command line. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: Please see below screen shot. Also, attached is the log since this issue started to happen. Thanks. Perhaps you can post a screenshot. Also check Apache error logs when you access that URL Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To:Mark Wagner mwag...@intelius.com Cc:ganglia-general@lists.sourceforge.net Date:10/18/2012 11:39 AM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Mark Wagner mwag...@intelius.com To:ganglia-general@lists.sourceforge.net Date:10/17/2012 07:46 PM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ For the logo, with version 3.5.3 of ganglia-web (and possibly others) you can create create templates/default/user_header.tpl which gets pulled in by templates/default/header.tpl like so right at the start of the body: /head body style=background-color: #ff; onunload=g_refresh_timer=null {if isset($user_header)} {include(file=user_header.tpl)} {/if} On 10/17/2012 03:05 PM, Ghassan Elnajjar wrote: Has anyone added their own custom logo, i.e. company logo, to their ganglia web? Are their any instructions on how to do this? Also, does anyone know how to change the Utilization Heatmap to a pie chart? Thank you. Ghassan NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http
Re: [Ganglia-general] Additional Bars
I have to upgrade the following files as well. Do I need to do that or I can just use the --nodeps parameter? Ghassan #: rpm -Uvh rrdtool-1.3.9-1.aix5.1.ppc.rpm cairo = 1.8.8 is needed by rrdtool-1.3.9-1 freetype2 = 2.3.12 is needed by rrdtool-1.3.9-1 libart_lgpl = 2.3.20 is needed by rrdtool-1.3.9-1 libpng = 1.2.44 is needed by rrdtool-1.3.9-1 pango = 1.24.5 is needed by rrdtool-1.3.9-1 dejavu-sans-mono-fonts is needed by rrdtool-1.3.9-1 dejavu-lgc-sans-mono-fonts is needed by rrdtool-1.3.9-1 libcairo.a(libcairo.so.2) is needed by rrdtool-1.3.9-1 libpango-1.0.a(libpango-1.0.so.0) is needed by rrdtool-1.3.9-1 libpangocairo-1.0.a(libpangocairo-1.0.so.0) is needed by rrdtool-1.3.9-1 Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To: Vladimir Vuksan vli...@veus.hr Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 11:42 AM Subject:Re: [Ganglia-general] Additional Bars Thank you. Do I just upgrade right on top of the 1.2.30 or there is a specific rpm command that I need to execute? Is rpm -U package_name sufficient? Ghassan From:Vladimir Vuksan vli...@veus.hr To:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 11:33 AM Subject:Re: [Ganglia-general] Additional Bars That could be the problem. Can you upgrade to rrdtool 1.3+. We use a lot of features from 1.3+ so things will look off if you use rrdtool 1.2. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I'm using rrdtool-1.2.30-5. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Vladimir Vuksan vli...@veus.hr To:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc:ganglia-general@lists.sourceforge.net Date:10/19/2012 10:49 AM Subject:Re: [Ganglia-general] Additional Bars _ What RRDtool version are you running ? Also please click on the broken image ie. open it in a new window. Then append debug=5 to the URL. It should give you the rrdtool command it's attempting to execute. Try to run it on the command line. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: Please see below screen shot. Also, attached is the log since this issue started to happen. Thanks. Perhaps you can post a screenshot. Also check Apache error logs when you access that URL Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To:Mark Wagner mwag...@intelius.com Cc:ganglia-general@lists.sourceforge.net Date:10/18/2012 11:39 AM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap _ Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Mark Wagner mwag...@intelius.com To:ganglia-general@lists.sourceforge.net Date:10/17/2012 07:46 PM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap
Re: [Ganglia-general] Additional Bars
I'm afraid you'll have to update all those too. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I have to upgrade the following files as well. Do I need to do that or I can just use the --nodeps parameter? Ghassan #: rpm -Uvh rrdtool-1.3.9-1.aix5.1.ppc.rpm cairo = 1.8.8 is needed by rrdtool-1.3.9-1 freetype2 = 2.3.12 is needed by rrdtool-1.3.9-1 libart_lgpl = 2.3.20 is needed by rrdtool-1.3.9-1 libpng = 1.2.44 is needed by rrdtool-1.3.9-1 pango = 1.24.5 is needed by rrdtool-1.3.9-1 dejavu-sans-mono-fonts is needed by rrdtool-1.3.9-1 dejavu-lgc-sans-mono-fonts is needed by rrdtool-1.3.9-1 libcairo.a(libcairo.so.2) is needed by rrdtool-1.3.9-1 libpango-1.0.a(libpango-1.0.so.0) is needed by rrdtool-1.3.9-1 libpangocairo-1.0.a(libpangocairo-1.0.so.0) is needed by rrdtool-1.3.9-1 Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To: Vladimir Vuksan vli...@veus.hr Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 11:42 AM Subject: Re: [Ganglia-general] Additional Bars _ Thank you. Do I just upgrade right on top of the 1.2.30 or there is a specific rpm command that I need to execute? Is rpm -U package_name sufficient? Ghassan From: Vladimir Vuksan vli...@veus.hr To: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 11:33 AM Subject: Re: [Ganglia-general] Additional Bars _ That could be the problem. Can you upgrade to rrdtool 1.3+. We use a lot of features from 1.3+ so things will look off if you use rrdtool 1.2. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: I'm using rrdtool-1.2.30-5. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Vladimir Vuksan vli...@veus.hr To: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu Cc: ganglia-general@lists.sourceforge.net Date: 10/19/2012 10:49 AM Subject: Re: [Ganglia-general] Additional Bars _ What RRDtool version are you running ? Also please click on the broken image ie. open it in a new window. Then append debug=5 to the URL. It should give you the rrdtool command it's attempting to execute. Try to run it on the command line. Vladimir On Fri, 19 Oct 2012, Ghassan Elnajjar wrote: Please see below screen shot. Also, attached is the log since this issue started to happen. Thanks. Perhaps you can post a screenshot. Also check Apache error logs when you access that URL Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To: Mark Wagner mwag...@intelius.com Cc: ganglia-general@lists.sourceforge.net Date: 10/18/2012 11:39 AM Subject: Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap ___ _ _ Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work
[Ganglia-general] Additional Bars
When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To: Mark Wagner mwag...@intelius.com Cc: ganglia-general@lists.sourceforge.net Date: 10/18/2012 11:39 AM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Mark Wagner mwag...@intelius.com To:ganglia-general@lists.sourceforge.net Date:10/17/2012 07:46 PM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap For the logo, with version 3.5.3 of ganglia-web (and possibly others) you can create create templates/default/user_header.tpl which gets pulled in by templates/default/header.tpl like so right at the start of the body: /head body style=background-color: #ff; onunload=g_refresh_timer=null {if isset($user_header)} {include(file=user_header.tpl)} {/if} On 10/17/2012 03:05 PM, Ghassan Elnajjar wrote: Has anyone added their own custom logo, i.e. company logo, to their ganglia web? Are their any instructions on how to do this? Also, does anyone know how to change the Utilization Heatmap to a pie chart? Thank you. Ghassan NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general -- Mark Wagner | mwag...@intelius.com System Administrator | Intelius Inc. -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us
Re: [Ganglia-general] Additional Bars
Perhaps you can post a screenshot. Also check Apache error logs when you access that URL Ghassan Elnajjar gelnaj...@mcvh-vcu.edu wrote: When I click on a particular node within a cluster, in the body of the page above the Edit Optional Graphs button, there is an extra column on the far left that only shows the bar that includes +, CSV, JSON, Inspect, and Hide/Show Events with no graphs underneath them. To the right of that column are two additional columns where there are graphs underneath the bars. Does anyone know what could cause this? I did not chose to display any additional optional graphs. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From: Ghassan Elnajjar gelnaj...@mcvh-vcu.edu To: Mark Wagner mwag...@intelius.com Cc: ganglia-general@lists.sourceforge.net Date: 10/18/2012 11:39 AM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap Hi Mark, Please excuse me for my ignorance. What code do I need to add to the user_header.tpl? Is it html code? Do I add the directory structure leading to the logo.jpg? Thanks. Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org From:Mark Wagner mwag...@intelius.com To:ganglia-general@lists.sourceforge.net Date:10/17/2012 07:46 PM Subject:Re: [Ganglia-general] Gaglia Web LOGO Utilization Heatmap For the logo, with version 3.5.3 of ganglia-web (and possibly others) you can create create templates/default/user_header.tpl which gets pulled in by templates/default/header.tpl like so right at the start of the body: /head body style=background-color: #ff; onunload=g_refresh_timer=null {if isset($user_header)} {include(file=user_header.tpl)} {/if} On 10/17/2012 03:05 PM, Ghassan Elnajjar wrote: Has anyone added their own custom logo, i.e. company logo, to their ganglia web? Are their any instructions on how to do this? Also, does anyone know how to change the Utilization Heatmap to a pie chart? Thank you. Ghassan NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general -- Mark Wagner | mwag...@intelius.com System Administrator | Intelius Inc. -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination,