Re: gEDA-user: Autorouter - distance to pins
Date: Tue, 4 Jan 2011 22:03:51 -0400 From: ms...@bitflipper.ca To: geda-user@moria.seul.org Subject: gEDA-user: Autorouter - distance to pins Is there a way to set the minimum distance that the autorouter leaves between tracks and pins? I've looked in the manual, tried setting DRC Minimum copper spacing, tried enabling Settings-Enforce DRC clearances but the autorouter still runs tracks closer to pins than I would like. Any suggestions would be appreciated. Is this the obvious setting? Route style- Clearance? Maybe you also need to enable auto-enforce DRC. At least 2010... version has those settings. I didn't test that because I haven't had need to change that. Manual drawing worked that way. Best Regards, Hannu Vuolasaho ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Autorouter - distance to pins
On Tue, 2011-01-04 at 22:03 -0400, Cam Farnell wrote: Is there a way to set the minimum distance that the autorouter leaves between tracks and pins? I've looked in the manual, tried setting DRC Minimum copper spacing, tried enabling Settings-Enforce DRC clearances but the autorouter still runs tracks closer to pins than I would like. Any suggestions would be appreciated. Thanks Cam Farnell I guess you are referring to the default router, not the toporouter. http://pcb.gpleda.org/pcb-20100929/pcb.html#Autorouter Select Route Styles at the left, increase clearance before starting the router. ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Autorouter - distance to pins
Cam Farnell wrote: Is there a way to set the minimum distance that the autorouter leaves between tracks and pins? I've looked in the manual, tried setting DRC Minimum copper spacing, tried enabling Settings-Enforce DRC clearances but the autorouter still runs tracks closer to pins than I would like. Any suggestions would be appreciated. Maybe the clearance of the pins is the relevant variable. For testing you can increment clearance with [k] while the mouse hovers over the pin. For mass change, I'd recommend the ChangeClearSize action. See http://geda.seul.org/wiki/geda:pcb_tips#how_do_i_change_the_soldermask_clearance_around_a_hole_pad I don't use the autorouter much. So I may be completely off at this. ---)kaimartin(--- -- Kai-Martin Knaak Email: k...@familieknaak.de Öffentlicher PGP-Schlüssel: http://pool.sks-keyservers.net:11371/pks/lookup?search=0x6C0B9F53 ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user