Re: gEDA-user: GNUdino V0.2 (ARDUINO Board Designed using gEDA)
Looks like the silkscreen on the diodes is going over the pad/holes. The paint may interfere with the solder flow during assembly. Best to keep the silkscreen off the pads. Steve jeffrey_ant...@yahoo.com wrote: >Hi... > >I have once more designed a revised version of GNUdino. >Please check it and report errors if any. >[1]http://jeffrey.co.in/gnudino/ > >Last time I had asked an error. I got a good reply . The errors were >pointed out. Special thanks to those who had pointed out the >errors. > >Jeffrey Antony >[2]http://jeffrey.co.in/ > > References > >1. http://jeffrey.co.in/gnudino/ >2. http://jeffrey.co.in/ > > > > > > > ___ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user > ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: GNUdino V0.2 (ARDUINO Board Designed using gEDA)
On Mon, Mar 23, 2009 at 12:39:23AM -0700, jeffrey_ant...@yahoo.com wrote: > I have once more designed a revised version of GNUdino. > Please check it and report errors if any. You have too small drill size (0.51mm or 15mil) on the axial diodes. Also the pads connected to polygons are missing thermals. You can also safely increase the copper annulus on the header connectors. This would help people making the board using toner transfer. I assume that some vias are there to allow soleding pieces of wire on the top side instead of making 2-layer board. To make that clear you can make the connections yourself on the component copper layer. Hope that helps, -- Krzysztof Kościuszkiewicz "Simplicity is the ultimate sophistication" -- Leonardo da Vinci ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
gEDA-user: GNUdino V0.2 (ARDUINO Board Designed using gEDA)
Hi... I have once more designed a revised version of GNUdino. Please check it and report errors if any. [1]http://jeffrey.co.in/gnudino/ Last time I had asked an error. I got a good reply . The errors were pointed out. Special thanks to those who had pointed out the errors. Jeffrey Antony [2]http://jeffrey.co.in/ References 1. http://jeffrey.co.in/gnudino/ 2. http://jeffrey.co.in/ ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
