Re: [VOTE] Graduate Apache MXNet to a TLP

2022-08-19 Thread Jason Dai 
t;
> > > > the Foundation and consistent with the Foundation's purpose to
> > establish
> > > >
> > > > a Project Management Committee charged with the creation and
> > maintenance
> > > >
> > > > of open-source software, for distribution at no charge to the public,
> > > >
> > > > related to a flexible and efficient library for Deep Learning.
> > > >
> > > > NOW, THEREFORE, BE IT RESOLVED, that a Project Management Committee
> > > >
> > > > (PMC), to be known as the "Apache MXNet Project", be and hereby is
> > > >
> > > > established pursuant to Bylaws of the Foundation; and be it further
> > > >
> > > > RESOLVED, that the Apache MXNet Project be and hereby is responsible
> > for
> > > >
> > > > the creation and maintenance of software related to a flexible and
> > > >
> > > > efficient library for Deep Learning; and be it further
> > > >
> > > > RESOLVED, that the office of "Vice President, Apache MXNet" be and
> > > >
> > > > hereby is created, the person holding such office to serve at the
> > > >
> > > > direction of the Board of Directors as the chair of the Apache MXNet
> > > >
> > > > Project, and to have primary responsibility for management of the
> > > >
> > > > projects within the scope of responsibility of the Apache MXNet
> > Project;
> > > >
> > > > and be it further
> > > >
> > > > RESOLVED, that the persons listed immediately below be and hereby are
> > > >
> > > > appointed to serve as the initial members of the Apache MXNet
> Project:
> > > >
> > > > * Anirudh Subramanian 
> > > >
> > > > * Bing Xu 
> > > >
> > > > * Bob Paulin 
> > > >
> > > > * Carin Meier 
> > > >
> > > > * Chiyuan Zhang 
> > > >
> > > > * Chris Olivier 
> > > >
> > > > * Dick Carter 
> > > >
> > > > * Eric Xie 
> > > >
> > > > * Furkan Kamaci 
> > > >
> > > > * Haibin Lin 
> > > >
> > > > * Henri Yandell 
> > > >
> > > > * Hongliang Liu 
> > > >
> > > > * Indhu Bharathi 
> > > >
> > > > * Jackie Wu 
> > > >
> > > > * Jason Dai 
> > > >
> > > > * Jian Zhang 
> > > >
> > > > * Joe Evans 
> > > >
> > > > * Joe Spisak 
> > > >
> > > > * Jun Wu 
> > > >
> > > > * Leonard Lausen 
> > > >
> > > > * Liang Depeng 
> > > >
> > > > * Ly Nguyen 
> > > >
> > > > * Madan Jampani 
> > > >
> > > > * Marco de Abreu 
> > > >
> > > > * Markus Weimer 
> > > >
> > > > * Mu Li 
> > > >
> > > > * Nan Zhu 
> > > >
> > > > * Naveen Swamy 
> > > >
> > > > * Przemysław Trędak 
> > > >
> > > > * Qiang Kou 
> > > >
> > > > * Qing Lan 
> > > >
> > > > * Sandeep Krishnamurthy 
> > > >
> > > > * Sergey Kolychev 
> > > >
> > > > * Sheng Zha 
> > > >
> > > > * Shiwen Hu 
> > > >
> > > > * Tao Lv 
> > > >
> > > > * Terry Chen 
> > > >
> > > > * Thomas Delteil 
> > > >
> > > > * Tianqi Chen 
> > > >
> > > > * Tong He 
> > > >
> > > > * Tsuyoshi Ozawa 
> > > >
> > > > * Xingjian Shi 
> > > >
> > > > * YiZhi Liu 
> > > >
> > > > * Yifeng Geng 
> > > >
> > > > * Yu Zhang 
> > > >
> > > > * Yuan Tang 
> > > >
> > > > * Yutian Li 
> > > >
> > > > * Zhi Zhang 
> > > >
> > > > * Zihao Zheng 
> > > >
> > > > * Ziheng Jiang 
> > > >
> > > > * Ziyue Huang 
> > > >
> > > > NOW, THEREFORE, BE IT FURTHER RESOLVED, that Sheng Zha be appointed
> to
> > > >
> > > > the office of Vice President, Apache MXNet, to serve in accordance
> with
> > > >
> > > > and subject to the direction of the Board of Directors and the Bylaws
> > of
> > > >
> > > > the Foundation until death, resignation, retirement, removal or
> > > >
> > > > disqualification, or until a successor is appointed; and be it
> further
> > > >
> > > > RESOLVED, that the Apache MXNet Project be and hereby is tasked with
> > the
> > > >
> > > > migration and rationalization of the Apache Incubator MXNet podling;
> > and
> > > >
> > > > be it further
> > > >
> > > > RESOLVED, that all responsibilities pertaining to the Apache
> Incubator
> > > >
> > > > MXNet podling encumbered upon the Apache Incubator PMC are hereafter
> > > >
> > > > Discharged.
> > > >
> > > > —--
> > >
> > > -
> > > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > > For additional commands, e-mail: general-h...@incubator.apache.org
> > >
> > >
> >
>

Re: [VOTE] Release Apache MXNet (incubating) version 2.0.0.beta1.rc1

2022-03-18 Thread Jason Dai 
+1 (binding); I checked:



- Incubating in name

- LICENSE and NOTICE exist

- Checksum correct



Thanks,

-Jason

On Thu, Mar 17, 2022 at 10:36 PM Atri Sharma  wrote:

> +1 (binding)
>
> On Thu, 17 Mar 2022, 20:00 kezhenxu94,  wrote:
>
> > Carry my +1 (binding) from dev@ list
> >
> > Please reach out to other mentors to vote in dev@ list..
> >
> > > On Mar 16, 2022, at 12:44, Zhenghui Jin 
> wrote:
> > >
> > > Thanks Craig,
> > >
> > > I have sent emails to our mentors for their votes.
> > >
> > >> On 2022/03/15 02:13:50 Craig Russell wrote:
> > >> Hi Barry,
> > >>
> > >> When you have a vote in the incubator, only IPMC members are
> considered
> > binding.
> > >>
> > >> It's good to ask your mentors for their votes. If they all vote, you
> > have all the binding votes you need.
> > >>
> > >> Warm regards,
> > >> Craig
> > >>
> >  On Mar 14, 2022, at 6:15 PM, Barry Jin 
> > wrote:
> > >>>
> > >>> Because I do not get enough number of binding votes within 72 hours,
> I
> > will extend this voting with another 72 hours according to the release
> > policy.
> > >>>
> > >>> Thanks,
> > >>> Zhenghui Jin
> > >>>
> > >>>
> >  On Mar 11, 2022, at 5:58 PM, Barry Jin 
> > wrote:
> > 
> >  Dear MXNet community,
> > 
> >  This is a call for a releasing Apache MXNet (incubating)
> 2.0.0.beta1,
> > release candidate 1.
> > 
> >  Apache MXNet (incubating) community has voted and approved the
> > release.
> > 
> >  Vote thread:
> >  https://lists.apache.org/thread/wj0hlq3x0yof2bmdz1zkfmmzq7tdy0mz <
> > https://lists.apache.org/thread/wj0hlq3x0yof2bmdz1zkfmmzq7tdy0mz>
> > 
> >  Result thread:
> >  https://lists.apache.org/thread/xplocjybgjnz1qld7z66tqsqq8pf3rp6 <
> > https://lists.apache.org/thread/xplocjybgjnz1qld7z66tqsqq8pf3rp6>
> > 
> >  The source tarball, including signatures, digests, etc. can be found
> > at:
> > 
> > https://dist.apache.org/repos/dist/dev/incubator/mxnet/2.0.0.beta1.rc1/
> <
> > https://dist.apache.org/repos/dist/dev/incubator/mxnet/2.0.0.beta1.rc1/>
> > 
> >  The tag to be voted upon is 2.0.0.beta1.rc1:
> > 
> > https://github.com/apache/incubator-mxnet/releases/tag/2.0.0.beta1.rc1 <
> > https://github.com/apache/incubator-mxnet/releases/tag/2.0.0.beta1.rc1>
> > 
> >  The release hash is fc54fabe61573d0405b6ddead8c1501aedad3a11:
> > 
> >
> https://github.com/apache/incubator-mxnet/commit/fc54fabe61573d0405b6ddead8c1501aedad3a11
> > <
> >
> https://github.com/apache/incubator-mxnet/commit/fc54fabe61573d0405b6ddead8c1501aedad3a11
> > >
> > 
> >  KEYS file available:
> >  https://downloads.apache.org/incubator/mxnet/KEYS <
> > https://downloads.apache.org/incubator/mxnet/KEYS>
> > 
> >  For information about the contents of this release, see:
> > 
> > https://github.com/apache/incubator-mxnet/releases/tag/2.0.0.beta1.rc1 <
> > https://github.com/apache/incubator-mxnet/releases/tag/2.0.0.beta1.rc1>
> > 
> >  The vote will be open for 72 hours.
> > 
> >  [ ] +1 release this package as 2.0.0.beta1.rc1
> >  [ ] +0 no opinion
> >  [ ] -1 do not release this package because…
> > 
> >  Best regards,
> >  Zhenghui Jin
> > 
> > 
> > >>>
> > >>
> > >> Craig L Russell
> > >> c...@apache.org
> > >>
> > >>
> > >> -
> > >> To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > >> For additional commands, e-mail: general-h...@incubator.apache.org
> > >>
> > >>
> > >
> > > -
> > > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > > For additional commands, e-mail: general-h...@incubator.apache.org
> > >
> >
> > -
> > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > For additional commands, e-mail: general-h...@incubator.apache.org
> >
> >
>

Re: [VOTE] Release Apache MXNet (incubating) version 1.9.0.rc8 (corrected vote)

2021-12-13 Thread Jason Dai 
+1 (binding); I checked:



- Incubating in name

- Checksum correct

- No unexpected binary

- LICENSE and NOTICE exist



Thanks,

-Jason

On Mon, Dec 13, 2021 at 11:23 PM Sheng Zha  wrote:

> +1 (non-binding) carrying my vote from dev@ [1]
>
> [1] https://lists.apache.org/thread/zz0bcp3p8lxlw6jpdc6167v7bwc7d8xm
>
> On Sun, Dec 5, 2021 at 11:06 PM Serge Panev 
> wrote:
> >
> > Dear community,
> >
> > This is a call for a releasing Apache MXNet (incubating) 1.9.0, release
> > candidate 8.
> >
> > Apache MXNet (incubating) community has voted and approved the release.
> >
> > Vote thread:
> > https://lists.apache.org/thread/cb8xjt38s7j78htzd174hyd0yogcwpr8
> >
> > Result thread:
> > https://lists.apache.org/thread/rwpk1rzdyxmb6vv18d3lb96gqz4nvkdx
> >
> > The source tarball, including signatures, digests, etc. can be found at:
> > https://dist.apache.org/repos/dist/dev/incubator/mxnet/1.9.0.rc8/
> >
> > The tag to be voted upon is 1.9.0.rc8:
> > https://github.com/apache/incubator-mxnet/releases/tag/1.9.0.rc8
> >
> > The release hash is 8173b858dd1bff6be465bca2e2bbfc4eabd189b4:
> >
> https://github.com/apache/incubator-mxnet/commit/8173b858dd1bff6be465bca2e2bbfc4eabd189b4
> >
> > KEYS file available:
> > https://downloads.apache.org/incubator/mxnet/KEYS
> >
> > For information about the contents of this release, see:
> > https://cwiki.apache.org/confluence/display/MXNET/1.9.0+Release+Notes
> >
> > This vote follows the previous vote
> https://lists.apache.org/thread/63noybmypw0mh0qdp5covbp6yzqo85ly
> > but with a corrected KEYS file location.
> >
> > The vote will be open for 7 days.
> >
> > [ ] +1 release this package as 1.9.0.rc8
> > [ ] +0 no opinion
> > [ ] -1 do not release this package because...
> >
> > Best regards,
> > Serge Panev
> >
>
> -
> To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> For additional commands, e-mail: general-h...@incubator.apache.org
>
>

Re: [VOTE] Release Apache TubeMQ (Incubating) 0.8.0-incubating RC4

2021-03-03 Thread Jason Dai 
+1 (binding); I checked:



- Incubating in name

- LICENSE and NOTICE exist

- DISCLAIMER-WIP exists

- Checksum correct



Thanks,

-Jason

On Tue, Mar 2, 2021 at 5:00 PM Goson zhang  wrote:

> Thanks Xiangdong && Sasisai!!
>
> We also need 2 votes with binding, thanks anybody!
>
> After releasing this 0.8.0-RC4 version, we need make LICENSE rectification
> based on the problems found in this version.
>
> Thanks!!
>
>
>
> Xiangdong Huang  于2021年3月2日周二 下午2:02写道：
>
> > +1 (non-binding) as it has improvements comparing with RC2.
> >
> > I checked:
> > - run `mvn package`
> > - the ASC and SHA512
> >
> > minor issues:
> > There are still Catalog X licenses but now they are claimed clearly.
> (BTW,
> > my private suggestion is listing all dependencies and their license
> names).
> > Some files still have no Apache Rat header (I think it should be
> > reconsidered that claiming "**/README.md" and "**/docs/**" as exceptions)
> >
> >  Best,
> > ---
> > Xiangdong Huang
> > School of Software, Tsinghua University
> >
> >
> >
> > Saisai Shao  于2021年3月1日周一 下午7:29写道：
> >
> > > +1 binding.
> > >
> > > Checked license file, ASC and SHA512, LGTM.
> > >
> > > Best regards,
> > > Sasisai
> > >
> > > Goson zhang  于2021年2月26日周五 上午9:40写道：
> > >
> > > > Hi all:
> > > >
> > > > We need your help, can anyone help us to review this release?
> > > >
> > > > The release of this version has lasted for more than a month, and
> many
> > > > changes have been delayed due to version release issues and cannot be
> > > > merged into the master.
> > > >
> > > > We have restored the "-WIP" label until the bdb relies [1] is
> resolved
> > :
> > > > currently relies on BDB's code implementation needs to be adjusted,
> and
> > > it
> > > > will take a long time.
> > > >
> > > >
> > > > 1.
> > > >
> > > >
> > >
> >
> https://lists.apache.org/thread.html/r6858f56cb88ea8a279fb8bbce7be06b2230a701af46d4ac79fc08fee%40%3Cgeneral.incubator.apache.org%3E
> > > >
> > > > Thanks!
> > > >
> > > > Yuanbo Liu  于2021年2月22日周一 下午4:19写道：
> > > >
> > > > > Hello Incubator Community,
> > > > >
> > > > > This is a call for a vote to release Apache TubeMQ (Incubating)
> > > > version
> > > > > 0.8.0-incubating RC4
> > > > >
> > > > > The Apache TubeMQ community has voted on and approved a
> proposal
> > to
> > > > > release
> > > > > Apache TubeMQ (Incubating) version 0.8.0-incubating RC4
> > > > >
> > > > > We now kindly request the Incubator PMC members review and vote
> > on
> > > > this
> > > > > incubator release.
> > > > >
> > > > > TubeMQ community vote thread:
> > > > > •
> > > > >
> > > > >
> > > >
> > >
> >
> https://lists.apache.org/thread.html/rd8ff5969f969f91334cf576b648aa8dbb55194dd55508dc399806053%40%3Cdev.tubemq.apache.org%3E
> > > > >
> > > > > Vote result thread:
> > > > > •
> > > > >
> > > > >
> > > >
> > >
> >
> https://lists.apache.org/thread.html/reb37cce379a2c4d8048266b7899c99f5b988cd3225ad3fb685e4fbf1%40%3Cdev.tubemq.apache.org%3E
> > > > >
> > > > > The release candidate:
> > > > > •
> > > > >
> > > > >
> > > >
> > >
> >
> https://dist.apache.org/repos/dist/dev/incubator/tubemq/0.8.0-incubating-RC4/
> > > > >
> > > > > Git tag for the release:
> > > > > •
> > > > https://github.com/apache/incubator-tubemq/tree/0.8.0-incubating-RC4
> > > > >
> > > > > Release notes:
> > > > > •
> > > > >
> > > > >
> > > >
> > >
> >
> https://github.com/apache/incubator-tubemq/releases/tag/0.8.0-incubating-RC4
> > > > >
> > > > > The artifacts signed with PGP key E8754243E7B3E044,
> corresponding
> > > to
> > > > > yua...@apache.org, that can be found in keys file:
> > > > > • https://dist.apache.org/repos/dist/dev/incubator/tubemq/KEYS
> > > > >
> > > > > The vote will be open for at least 72 hours or until a
> necessary
> > > > number
> > > > > of votes are reached.
> > > > >
> > > > > Please vote accordingly:
> > > > >
> > > > > [ ] +1 approve
> > > > > [ ] +0 no opinion
> > > > > [ ] -1 disapprove with the reason
> > > > >
> > > > > Thanks,
> > > > > On behalf of Apache TubeMQ (Incubating) community
> > > > >
> > > >
> > >
> >
>

Re: [VOTE] Release Apache MXNet (incubating) version 1.8.0.rc3

2021-03-01 Thread Jason Dai 
+1 (binding); I checked:



- LICENSE and NOTICE exist

- DISCLAIMER-WIP exists

- Incubating in name

- Checksum correct

- No unexpected binary


Please fix LICENSE and DISCLAIMER-WIP.


Thanks,

-Jason

On Fri, Feb 26, 2021 at 8:59 AM Craig Russell  wrote:

> Hi Sheng,
>
> The first place I would suggest you to ask is your mentors. Next, your
> PPMC members who are IPMC members.
>
> Hope this helps,
> Craig
>
> > On Feb 25, 2021, at 1:21 PM, Sheng Zha  wrote:
> >
> > Bumping this thread up. Thanks to those who helped with the vote.
> >
> > So far, our 1.8 vote has received 2 binding votes from general@, one
> > from Justin and one from our new mentor Furkan. Since this vote has
> > been open for a month, I wonder if there's any suggestion from people
> > on the list on how we can improve engagement.
> >
> > Thanks,
> > Sheng
> >
> > On Wed, Feb 10, 2021 at 4:07 AM Furkan KAMACI 
> wrote:
> >>
> >> Hi,
> >>
> >> +1 from me (binding).
> >>
> >> I checked:
> >>
> >> - Incubating in name
> >> - DISCLAIMER-WIP exists
> >> - LICENSE is fine
> >> - NOTICE has incorrect year
> >> - No unexpected binary files
> >> - Checked PGP signatures
> >> - Checked checksums
> >> - Code compiles and tests successfully run
> >>
> >> PS: DISCLAIMER-WIP/LICENSE should be fixed as Justin mentioned.
> >>
> >> Kind Regards,
> >> Furkan KAMACI
> >>
> >> On Tue, Feb 9, 2021 at 8:15 PM Sam Skalicky 
> wrote:
> >>
> >>> Hi Mentors,
> >>>
> >>> Please help us get out this release by voting. Thanks for helping
> MXNet as
> >>> it grows in the incubator.
> >>>
> >>> Thanks!
> >>> Sam
> >>>
> >>> On 2021/02/01 18:52:24, Sam Skalicky  wrote:
>  Thanks Justin,
> 
>  We'll take note of these callouts and address them in the next
> release.
> 
>  Sam
> 
>  On 2021/01/28 03:38:37, Justin Mclean 
> wrote:
> > Hi,
> >
> > +1 (binding) but only because of WIP DISCLAIMER. LICENSE is not
> >>> correct and source release contains Category B licensed bits.
> >
> > I checked:
> > - incubating in name
> > - signatures and hashes are fine
> > - DISCLAIMER (WIP) exist but information has not been updated in it
> > - LICENSE looks OK but I’ve not checked everything and there looks
> >>> like there been a lot  of changes since the last release. It missing
> some
> >>> 3rd party licenses.
> > - NOTICE has incorrect year
> > - The source include a font under the OFL license In general this
> >>> can't be included in a source release. [1] This should be mention in
> the
> >>> DISCLAIMER. Also [4] and [7] are under the OFL license I believe.
> > - It would be good to see more description in the rat exclusions file
> >>> (and have it at the top level)
> > - No unexpected binary files. However I did seem some binary files
> >>> that should be mentioned in LICENSE. [2][3][4][5][6][7]
> > - It also unclear how [2] is licensed and may be category X
> > -  I didn’t try to compile from source
> >
> > Thanks,
> > Justin
> >
> >
> > 1 https://www.apache.org/legal/resolved.html#weak-copyleft-licenses
> > 2. ./3rdparty/mkldnn/doc/assets/fonts/fontawesome-webfont*
> > 3. ./3rdparty/mkldnn/doc/assets/fonts/lato*
> > 4.
> ./3rdparty/mkldnn/doc/assets/mathjax/fonts/HTML-CSS/Asana-Math/otf*
> > 5. ./3rdparty/mkldnn/doc/assets/mathjax/fonts/HTML-CSS/*/*/MathJax*
> > 6.
> >>>
> ./docs/python_docs/themes/mx-theme/mxtheme/static/material-design-icons-3.0.1/iconfont/*
> > 7.
> /docs/python_docs/themes/mx-theme/mxtheme/static/webfonts/fa-solid*
> >
> >
> > -
> > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > For additional commands, e-mail: general-h...@incubator.apache.org
> >
> >
> 
>  -
>  To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
>  For additional commands, e-mail: general-h...@incubator.apache.org
> 
> 
> >>>
> >>> -
> >>> To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> >>> For additional commands, e-mail: general-h...@incubator.apache.org
> >>>
> >>>
> >
> > -
> > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > For additional commands, e-mail: general-h...@incubator.apache.org
> >
>
> Craig L Russell
> c...@apache.org
>
>

Re: [VOTE] Release Apache MXNet (incubating) version 1.7.0.rc1

2020-08-19 Thread Jason Dai 
 +1 (binding)


I checked:

- Incubating in name

- Signatures and hashes

- Disclaimer, LICENSE and NOTICE


Thanks,

-Jason

On Tue, Aug 18, 2020 at 6:25 PM Michael Wall  wrote:

> Thanks for the follow up Ciyong.  You are right, -vv did not enable
> verbose. If I had used -VV (with capital V's) I would have gotten
> output.
>
> Good luck on the vote.
>
> Mike
>
> On Tue, Aug 18, 2020 at 2:43 AM Chen, Ciyong 
> wrote:
> >
> > Hi Michael,
> >
> > Thank you for your time to review and vote.
> >
> > Regarding your questions:
> > > - Does anything with mshadow need to change now that it has passed
> clearance.
> > From source code release perspective, I don't think there's anything we
> need to change as mshadow is already in the code base with the correct
> license header. CC @Sheng to see if any comments.
> >
> > > - I tried running tests a couple of ways after the build I build but
> they just hung for 15 min before I control-c'd them.  Maybe I didn't wait
> long enough, but there was no indication anything was running.
> > The test suite contains lots of test cases which will be very time
> consuming, " ctest -vv" doesn't enable the verbose output thus looks like
> it hung as no output on the terminal.
> > By using "ctest --verbose" which turns on the verbose and will give more
> details for all the test cases.
> > Currently, the entire test suite will run through many different
> configurations of hardware and docker image via CI pipeline.
> >
> > Thanks,
> > -Ciyong
> >
> > -Original Message-
> > From: Michael Wall 
> > Sent: Tuesday, August 18, 2020 9:54 AM
> > To: general@incubator.apache.org
> > Subject: Re: [VOTE] Release Apache MXNet (incubating) version 1.7.0.rc1
> >
> > +1 from me
> >
> > Checked
> > - signatures
> > - incubating in name
> > - License, Notice and Disclaimer
> > - Compiled from source with CPP bindings using
> https://mxnet.apache.org/versions/1.6/get_started/build_from_source#install-mxnet-for-python
> ,
> > https://mxnet.apache.org/versions/1.6/get_started/cpp_setup and
> https://github.com/apache/incubator-mxnet/blob/1.7.0.rc1/config/linux.cmake
> >
> > Couple of questions
> > - Does anything with mshadow need to change now that it has passed
> clearance.
> > - I tried running tests a couple of ways after the build I build but
> they just hung for 15 min before I control-c'd them.  Maybe I didn't wait
> long enough, but there was no indication anything was running.
> >
> > Here is the run
> >
> > ```
> > [0/1] Running tests...
> > Test project
> /home/mikewall/Desktop/mxnet-1.7.0/apache-mxnet-src-1.7.0.rc1-incubating/build
> > Start 1: AllTestsInmxnetUnitTests
> > ^Cninja: build stopped: interrupted by user.
> > ```
> >
> > And here is my history fwiw
> >
> > ```
> > sudo apt-get install -y build-essential git ninja-build ccache
> libopenblas-dev libopencv-dev cp config/linux.cmake config.cmake rm -rf
> build cmake -S. -Bbuild -DUSE_CPP_PACKAGE=1 -DCMAKE_BUILD_TYPE=Release
> -GNinja cmake --build build cmake --build build --target test cd build &&
> ctest -vv ```
> >
> > On Mon, Aug 17, 2020 at 2:27 PM Sheng Zha  wrote:
> > >
> > > Hi Justin,
> > >
> > > Since the blocking issue has been resolved, would you mind changing
> your vote? Thanks.
> > >
> > > Regards,
> > > Sheng
> > >
> > > On 2020/07/26 01:27:39, Justin Mclean 
> wrote:
> > > > Hi,
> > > >
> > > > -1 (binding) as this release contains code that hasn’t gone though
> IP clearance (mshadow).
> > > >
> > > > I checked:
> > > > - incubating in name
> > > > - disclaimer exists
> > > > - LICENSE and NOTICE have improved but I did not do an exhaustive
> > > > check
> > > > -  No unexpected binary file
> > > > - ASF files have ASF headers
> > > > - unable to compile from source
> > > >
> > > > It also seems that this code may have been released before the
> > > > PPMC/IPMC vote is over see [1][2][3][4] There are also branding and
> > > > trademark issue with this site [5] This is in addition to the issues
> > > > previously noted with releases, branding and trademarks.[6]
> > > >
> > > > Thanks,
> > > > Justin
> > > >
> > > >
> > > > 1. https://sourceforge.net/projects/apache-mxnet.mirror/
> > > > 2.
> > > > https://repo.gradle.org/gradle/simple/repo/ai/djl/mxnet/mxnet-native
> > > > -mkl/1.7.0-b/ 3. https://mvnrepository.com/artifact/ai.djl.mxnet
> > > > 4.
> > > > https://aur.archlinux.org/packages/?O=0&SeB=nd&K=mxnet&SB=v&SO=d&PP=
> > > > 50&do_Search=Go
> > > > 5. https://djl.ai
> > > > 6. https://jira.apache.org/jira/browse/INCUBATOR-253
> > > > 
> > > > - To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > > > For additional commands, e-mail: general-h...@incubator.apache.org
> > > >
> > > >
> > >
> > > -
> > > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > > For additional commands, e-mail: general-h...@incubator.apache.org
> > >
>

Re: [VOTE] Release Apache MXNet (incubating) version 1.6.0.rc2

2020-02-20 Thread Jason Dai 
+1 (binding)



I checked:

 - incubating in name

 - LICENSE / NOTICE

 - Signatures and checksum good

 - DISCLAIMER exists


Thanks,

-Jason

On Thu, Feb 20, 2020 at 3:42 AM Tianqi Chen 
wrote:

> +1(binding), I checked
>
> - Keys,
> - sha512
> - DISCLAIMER-WIP, LICENSE, NOTICE
> - No unexpected binary files
> - Code compiles under nvcc, g++7(need to set DEV=0 to skip warnings)
>
> TQ
>
> On Tue, Feb 18, 2020 at 10:14 AM Przemysław Trędak 
> wrote:
>
> > Dear Community,
> >
> > This is a gentle reminder to test and vote on this release.
> >
> > Best regards,
> > Przemyslaw Tredak
> >
> > On 2020/02/10 18:17:26, Przemys��aw Tr��dak  wrote:
> > > Dear Community,
> > >
> > > This is a call for a releasing Apache MXNet (incubating) 1.6.0, release
> > candidate 2.
> > >
> > > Apache MXNet (incubating) community has voted and approved the release.
> > >
> > > Vote thread:
> > >
> >
> https://lists.apache.org/thread.html/6dd3088c053fa111ef93412ac1b07c193d5eeb99dc82eadb99f7562b%40%3Cdev.mxnet.apache.org%3E
> > >
> > > Result thread:
> > >
> >
> https://lists.apache.org/thread.html/6f6118010596532484ee5e38a8c2ebbe5d2e8abd7a40e6964cd43367%40%3Cdev.mxnet.apache.org%3E
> > >
> > > The source tarball, including signatures, digests, etc. can be found
> at:
> > > https://dist.apache.org/repos/dist/dev/incubator/mxnet/1.6.0.rc2/
> > >
> > > The tag to be voted upon is 1.6.0.rc2:
> > > https://github.com/apache/incubator-mxnet/tree/1.6.0.rc2
> > >
> > > The release hash is 6eec9da55c5096079355d1f1a5fa58dcf35d6752:
> > >
> >
> https://github.com/apache/incubator-mxnet/commit/6eec9da55c5096079355d1f1a5fa58dcf35d6752
> > >
> > > KEYS file available:
> > > https://dist.apache.org/repos/dist/dev/incubator/mxnet/KEYS
> > >
> > > For information about the contents of this release, see:
> > > https://cwiki.apache.org/confluence/display/MXNET/1.6.0+Release+notes
> > >
> > > The vote will be open for 72 hours.
> > >
> > > [ ] +1 release this package as 1.6.0
> > > [ ] +0 no opinion
> > > [ ] -1 do not release this package because...
> > >
> > > Best regards,
> > > Przemysław Trędak
> > >
> > > -
> > > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > > For additional commands, e-mail: general-h...@incubator.apache.org
> > >
> > >
> >
> > -
> > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > For additional commands, e-mail: general-h...@incubator.apache.org
> >
> >
>

Re: [VOTE] Release Apache MXNet (incubating) 1.5.1.rc0

2019-09-27 Thread Jason Dai 
+1 (binding)



I checked:

- Signatures and hashes OK

- Incubating in name

- Disclaimer and NOTICE exists

- LICENSE OK



Thanks,

-Jason

On Thu, Sep 26, 2019 at 11:17 PM Tao Lv  wrote:

> Hi Justin,
>
> Thank you for sharing the link. We will follow the WIP disclaimer next time
> or if we have another release candidate.
>
> Thanks,
> -tao
>
> On Thu, Sep 26, 2019 at 6:03 AM Justin Mclean 
> wrote:
>
> > HI,
> >
> > > I'm trying to add below disclaimer into the release notes.
> >
> > That wold help but it not how the WIP disclaimer works - see  [1].
> >
> > Thanks,
> > Justin
> >
> > 1. https://incubator.apache.org/policy/incubation.html#disclaimers
> >
> > -
> > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > For additional commands, e-mail: general-h...@incubator.apache.org
> >
> >
>

Re: [VOTE] Release Apache MXNet (incubating) version 1.5.0.rc2

2019-07-18 Thread Jason Dai 
+1 (binding)

I checked:
 - incubating in name
 - Signatures and checksum look good
 - DISCLAIMER exists

Thanks,
-Jason

On Fri, Jul 19, 2019 at 12:53 AM Sheng Zha  wrote:

> Dear IPMC members,
>
> Thank you for all the help in spotting the license issues. Given that they
> are relatively minor we would like to address them in the next release.
>
> Since there is no longer any blocker, it would be great if you could
> continue to vote on this release. We still need one more vote to make this
> release. Thank you.
>
> Best,
> -sz
>
> On 2019/07/17 21:50:01, Justin Mclean  wrote:
> > Hi,
> >
> > > Duane Merril (author of CUB and this file in particular) sent an
> explanation to this list, but either his reply is stuck in moderation or
> there was some other technical difficulty and the message is not showing
> up. Below is the email that he sent to me.
> >
> > Thanks for the explanation and that looks fine to me.
> >
> > Thanks,
> > Justin
> > -
> > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > For additional commands, e-mail: general-h...@incubator.apache.org
> >
> >
>
> -
> To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> For additional commands, e-mail: general-h...@incubator.apache.org
>
>

Re: [VOTE] Release Apache MXNet (incubating) version 1.4.1.rc0

2019-05-08 Thread Jason Dai 
+1 (binding)

I checked:
 - incubating in name
 - Signatures and checksum look good
 - DISCLAIMER exists
 - LICENSE / NOTICE files look good

Thanks,
-Jason

On Wed, May 8, 2019 at 6:48 AM Sheng Zha  wrote:

> +1 (non-binding). I did the following checks:
>
> -[Y] Are release files in correct location?
> -[Y] Do release files have the word incubating in their name?
> -[Y] Are the digital signature and hashes correct?
> -[Y] Does DISCLAIMER file exist?
> -[Y] Do LICENSE and NOTICE files exists?
> -[Y] Is the LICENSE and NOTICE text correct?
> -[Y] Is the NOTICE year correct?
> -[Y] Un-included software dependencies are not mentioned in LICENSE or
> NOTICE?
> -[Y] License information is not mentioned in NOTICE?
>
> -sz
>
>
> On 2019/05/04 07:12:47, Junru Shao  wrote:
> > Dear community,
> >
> > This is a call for a releasing Apache MXNet (incubating) 1.4.1, release
> > candidate 0. Apache MXNet (incubating) community has voted and approved
> the
> > release.
> >
> > Vote thread:
> >
> https://lists.apache.org/thread.html/6c140f4c180c259dd1b7f4ecf36f2d083ed810cd68b37d7f635f5614@%3Cdev.mxnet.apache.org%3E
> >  .
> >
> > Result thread:
> >
> https://lists.apache.org/thread.html/8b11c43fdafa3b9174fe7fa2344ed3cf468eaf7fffa0afded722cdb2@%3Cdev.mxnet.apache.org%3E
> >  .
> >
> > The source tarball, including signatures, digests, etc. can be found at:
> > https://dist.apache.org/repos/dist/dev/incubator/mxnet/1.4.1.rc0/   .
> >
> > The tag to be voted upon is 1.4.1.rc0:
> > https://github.com/apache/incubator-mxnet/releases/tag/1.4.1.rc0/   .
> >
> > The release hash is 1a71996:
> >
> https://github.com/apache/incubator-mxnet/tree/1a7199691f5cbc6012bb53eecbf884bed5ae6590/
> >  .
> >
> > KEYS file available:
> > https://dist.apache.org/repos/dist/dev/incubator/mxnet/KEYS/   .
> >
> > For information about the contents of this release, see:
> >
> https://cwiki.apache.org/confluence/display/MXNET/Apache+MXNet+%28incubating%29+1.4.1+Release+Notes
> >  .
> >
> > The vote will be open for 72 hours, from May 3 2019, 23:59:59 PST to May
> 07
> > 2019, 23:59:59 PST. (Weekends are counted as half day)
> >
> > [ ] +1 release this package as ...
> > [ ] +0 no opinion
> > [ ] -1 do not release this package because...
> >
> > Best regards,
> > Junru Shao
> >
>
> -
> To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> For additional commands, e-mail: general-h...@incubator.apache.org
>
>

Re: [VOTE] Accept Apache TVM into the incubator

2019-03-04 Thread Jason Dai 
+1 (binding)

Thanks,
-Jason

On Mon, Mar 4, 2019 at 2:50 PM Gosling Von  wrote:

> +1, binding
>
>
> Best Regards,
> Von Gosling
>
> > 在 2019年2月28日，下午12:44，Markus Weimer  写道：
> >
> > Hi everyone,
> >
> > we've discussed the proposal for the TVM project in [1]. The proposal
> itself can
> > be found on the wiki [2].
> >
> > According to the Incubator rules[3] I'd like to call a vote to accept
> the new
> > TVM project as a podling in the Apache Incubator.
> >
> > A vote for accepting a new Apache Incubator podling is a majority vote.
> Everyone
> > is welcome to vote, only Incubator PMC member votes are binding. It
> would be
> > helpful (but not required) if you could add a comment stating whether
> your vote
> > is binding or non-binding.
> >
> > This vote will run for at least 72 hours (but I expect to keep it open
> for
> > longer). Please VOTE as follows:
> >
> > [ ] +1 Accept TVM into the Apache Incubator
> > [ ] +0 Abstain
> > [ ] -1 Do not accept TVM into the Apache Incubator because ...
> >
> > Thank you for everyone who decided to join in in the past discussions!
> >
> > Markus
> >
> > [1]:
> https://lists.apache.org/thread.html/e2b1fe9ca76422ec80b146a6b120091f2419e2f1c27d57080f39cf6f@%3Cgeneral.incubator.apache.org%3E
> >
> > [2]: https://wiki.apache.org/incubator/TVMProposal
> >
> > [3]: https://incubator.apache.org/guides/proposal.html#the_vote
> >
> > -
> > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > For additional commands, e-mail: general-h...@incubator.apache.org
> >
>
>
> -
> To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> For additional commands, e-mail: general-h...@incubator.apache.org
>
>

Re: [VOTE] Release Apache MXNet (incubating) version 1.4.0.rc3

2019-02-26 Thread Jason Dai 
+1 looks good to me

On Tue, Feb 26, 2019 at 3:29 PM Hen  wrote:

> +1.
>
> I reviewed the diff with the RC2 that I approved, no concerns with
> anything added.
>
> Cc'ing other mentors.
>
> Hen
>
>
> On Wed, Feb 20, 2019 at 10:45 AM Piyush Ghai 
> wrote:
>
>> Dear community,
>>
>> This is a call for releasing Apache MXNet (incubating) 1.4.0, release
>> candidate RC3.
>>
>> Apache MXNet (incubating) community has voted and approved the release.
>>
>> Vote thread :
>>
>> https://lists.apache.org/thread.html/618ad28580e838254f998deb71373467374a05228401dae0323a6d0f@%3Cdev.mxnet.apache.org%3E
>> <
>> https://lists.apache.org/thread.html/618ad28580e838254f998deb71373467374a05228401dae0323a6d0f@%3Cdev.mxnet.apache.org%3E
>> >
>>
>>
>> Results thread :
>>
>>
>> https://lists.apache.org/thread.html/68373b7be4a12e90f136aab2d55a334fad021bec7b796174d357f4b7@%3Cdev.mxnet.apache.org%3E
>> <
>> https://lists.apache.org/thread.html/68373b7be4a12e90f136aab2d55a334fad021bec7b796174d357f4b7@%3Cdev.mxnet.apache.org%3E>
>>
>>
>> The community raised the following issues which are not considered as
>> release stopper :
>>
>> 1. NOTICE year is wrong (2018): Not considered a stopping issue as release
>> was started in 2018.
>>
>>
>> The source tar ball, including signature, digests etc can be found at :
>>
>> https://dist.apache.org/repos/dist/dev/incubator/mxnet/1.4.0.rc3/ <
>> https://dist.apache.org/repos/dist/dev/incubator/mxnet/1.4.0.rc3/>
>>
>> The tag to be voted upon :
>> https://github.com/apache/incubator-mxnet/releases/tag/1.4.0.rc3 <
>> https://github.com/apache/incubator-mxnet/releases/tag/1.4.0.rc3>
>>
>> The release hash is a03d59e
>> <
>> https://github.com/apache/incubator-mxnet/commit/a03d59ed867ba334d78d61246a1090cd1868f5da
>> <
>> https://github.com/apache/incubator-mxnet/commit/a03d59ed867ba334d78d61246a1090cd1868f5da>>
>> :
>>
>>
>> https://github.com/apache/incubator-mxnet/commit/a03d59ed867ba334d78d61246a1090cd1868f5da
>> <
>> https://github.com/apache/incubator-mxnet/commit/a03d59ed867ba334d78d61246a1090cd1868f5da
>> >
>>
>> Release artifacts are signed with the following key :
>>
>> 0812 9523 58B1 2DC3 0536 E7E0 C069 16C3 AB88 ABFE
>>
>> KEYS file available :
>> https://dist.apache.org/repos/dist/dev/incubator/mxnet/KEYS <
>> https://dist.apache.org/repos/dist/dev/incubator/mxnet/KEYS>
>>
>> The vote will end on Monday, February 25th, 4:00 PM PDT or until the
>> sufficient number of votes is reached.
>>
>> [ ] +1 Release this package as 1.4.0
>> [ ] +0 no opinion
>> [ ] -1 Do not release this package because ...
>>
>>
>> Thanks,
>> Piyush
>
>

Re: [VOTE] Release Apache MXNet (incubating) version 1.4.0.rc2

2019-02-10 Thread Jason Dai 
+1

On Mon, Feb 11, 2019 at 9:15 AM kellen sunderland <
kellen.sunderl...@gmail.com> wrote:

> +1
>
> On Sun, Feb 10, 2019 at 3:39 PM Hen  wrote:
>
> > +1.
> >
> > On Wed, Feb 6, 2019 at 1:59 PM Steffen Rochel 
> > wrote:
> >
> > > Dear community,
> > >
> > > This is a call for releasing Apache MXNet (incubating) 1.4.0, release
> > > candidate 2
> > >
> > > Apache MXNet (incubating) community has voted and approved the release.
> > >
> > > Vote thread:
> > >
> > >
> > >
> >
> https://lists.apache.org/thread.html/4b445460d36d098be1c1e60e29869cf243e2bc37bd2b84ca7b1daab3@%3Cdev.mxnet.apache.org%3E
> > >
> > >
> > > Result thread:
> > >
> > >
> > >
> >
> https://lists.apache.org/thread.html/60e3272326cf93100370fa5b01a54a4b2f18f95462553b5a1acfd456@%3Cdev.mxnet.apache.org%3E
> > >
> > > The community raised the following issues which are not considered as
> > > release stopper:
> > >
> > > 1. NOTICE year is wrong (2018): Not considered a stopping issue as
> > release
> > > was started in 2018.
> > > 2. TVM NOTICE missing - TVM NOTICE file was added post the commit ID
> used
> > > in MXNet v1.4.0.rc2 release, not considered a stopping issue
> > > 3. build with make passes, but build with cmake failed in
> > > 3rdparty/dmlc-core/test/unittest
> > > 4. Recent MKLDNN upgrade prevents us from offering binary distribution
> > for
> > > earlier versions before OSX 10.13.
> > >
> > >
> > > The source tarball, including signatures, digests, etc. can be found
> at:
> > >
> > > https://dist.apache.org/repos/dist/dev/incubator/mxnet/1.4.0.rc2/
> > >
> > > The tag to be voted upon:
> > > https://github.com/apache/incubator-mxnet/releases/tag/1.4.0.rc2
> > >
> > > The release hash is e999a46
> > > <
> > >
> >
> https://github.com/apache/incubator-mxnet/commit/e999a46a8ca1383e78a9178dc65fa91e6e656c26
> > > >
> > > :
> > >
> > >
> > >
> >
> https://github.com/apache/incubator-mxnet/commit/e999a46a8ca1383e78a9178dc65fa91e6e656c26
> > >
> > > KEYS file available:
> > > https://dist.apache.org/repos/dist/dev/incubator/mxnet/KEYS
> > >
> > > For information about the contents of this release, see:
> > >
> > >
> >
> https://cwiki.apache.org/confluence/display/MXNET/Apache+MXNet+%28incubating%29+1.4.0+Release+Notes
> > >
> > > The vote will be open at least 72 hours (Sunday February 10th 4pm PST)
> > and
> > > until sufficient votes are received.
> > >
> > > [ ] +1 release this package as 1.4.0
> > > [ ] +0 no opinion
> > > [ ] -1 do not release this package because...
> > >
> > > Best regards,
> > > Steffen
> > >
> >
>

Re: [VOTE] Graduate Apache Airflow to TLP

2018-12-08 Thread Jason Dai 
+1 (non-binding)

On Sat, Dec 8, 2018 at 11:29 AM Brahma Reddy Battula 
wrote:

> +1 (non-binding)
>
> Regards
> Brahma Reddy
>
> On Sat, Dec 8, 2018 at 10:58 AM, Liang Chen 
> wrote:
>
> > Hi
> >
> > +1
> >
> > Regards
> > Liang
> >
> >
> >
> > --
> > Sent from: http://apache-incubator-general.996316.n3.nabble.com/
> >
> > -
> > To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> > For additional commands, e-mail: general-h...@incubator.apache.org
> >
> > --
>
>
>
> --Brahma Reddy Battula
>

Re: [VOTE] Release Apache MXNet (incubating) version 1.3.1.rc0

2018-11-26 Thread Jason Dai 
+1 (binding)

I checked:
- incubating in name
- DISCLAIMER exists
- LICENSE / NOTICE files look good
- Signatures and checksum good

Thanks,
-Jason


On Mon, Nov 26, 2018 at 10:37 PM Jim Jagielski  wrote:

> +1 (binding)
>
> > On Nov 21, 2018, at 9:30 AM, Anton Chernov  wrote:
> >
> > Dear community,
> >
> > This is a call for a releasing Apache MXNet (incubating) 1.3.1, release
> > candidate 0.
> >
> > Apache MXNet (incubating) community has voted and approved the release.
> >
> > Vote thread:
> >
> https://lists.apache.org/thread.html/32ab13b6d2d80fd75dbc2ec62151d12d09f6e0ca89799ae0aa26894b@%3Cdev.mxnet.apache.org%3E
> >
> > Result thread:
> >
> https://lists.apache.org/thread.html/4b6559e75a1027a99fada99faa3161eac6604af9e786da457e051bc7@%3Cdev.mxnet.apache.org%3E
> >
> > The source tarball, including signatures, digests, etc. can be found at:
> > https://dist.apache.org/repos/dist/dev/incubator/mxnet/1.3.1.rc0/
> >
> > The tag to be voted upon is 1.3.1.rc0:
> > https://github.com/apache/incubator-mxnet/releases/tag/1.3.1.rc0
> >
> > The release hash is c1327f3:
> >
> https://github.com/apache/incubator-mxnet/commit/c1327f317a7f371a9803a3f27be6ff90dc6af707
> >
> > KEYS file available:
> > https://dist.apache.org/repos/dist/dev/incubator/mxnet/KEYS
> >
> > For information about the contents of this release, see:
> >
> https://cwiki.apache.org/confluence/display/MXNET/Apache+MXNet+%28incubating%29+1.3.1+Release+Notes
> >
> > The vote will be open for 72 hours.
> >
> > [ ] +1 release this package as 1.3.1
> > [ ] +0 no opinion
> > [ ] -1 do not release this package because...
> >
> > Best regards,
> > Anton Chernov
>
>
> -
> To unsubscribe, e-mail: general-unsubscr...@incubator.apache.org
> For additional commands, e-mail: general-h...@incubator.apache.org
>
>

Re: [VOTE] Accept the brpc Project into the Apache Incubator.

2018-11-11 Thread Jason Dai 
+1

On Mon, Nov 12, 2018 at 10:23 AM Wenli Zhang  wrote:

> +1 (not binding)
>
> On 2018/11/08 19:25:23, Dave Fisher  wrote:
> > Hi -
> >
> > This is a VOTE to accept the brpc Project into the Apache Incubator.
> >
> > It will last for at least 72 hours and will pass if at least 3 +1 IPMC
> Votes and more IPMC Votes are +1 than -1.
> >
> > [ ] +1, accept the brpc proposal.
> > [ ] -1, reject the brpc proposal
> >
> > Regards,
> > Dave
> >
> > = brpc Proposal =
> >
> > === Abstract ===
> >
> > brpc is an industrial-grade RPC framework for building reliable and
> high-performance services.
> >
> >
> > === Proposal ===
> >
> > We propose to contribute the brpc codebase and associated artifacts(e.g.
> documentation etc.) to the Apache Software Foundation, and aim to  build a
> wider open community around it in the 'Apache Way'.
> >
> > === Background ===
> >
> > The RPC framework used in Baidu before 2014 was developed at 2008 and
> limited in protocols and performance, and there were also serveral
> implementations focused on their own scenarios from Baidu's different BU.
> As an infrastructural team in Baidu, we tried to build a new framework to
> unify all RPC scenarios inside. The framework was named "baidu-rpc"
> internally the early versions were adopted and online at late 2014. The
> framework was rapidly iterated at 2015-2017, and thousands kinds of
> services and almost all core services adopted it. And in 2017, we
> opensourced it as "brpc" and hope to get more adoptions and contributions
> from outside. At the time of opensourcing, there're more than 1 million
> instances inside Baidu using baidu-rpc (not counting clients).
> >
> >
> > === Rationale ===
> >
> > brpc has been approved inside baidu, since many high performance core
> services are using it.
> > And since its open source, it has been adopted by several other
> companies, including Iqiyi, Didi, Sougou, BiliBili etc.
> >
> >
> > === Current Status ===
> >
> > brpc has been an open source project on GitHub (
> https://github.com/brpc/brpc ) since 2017.
> >
> > Currently it has more than 7.3k stars, 1.6k forks, and is one of the
> most popular repositories in topic of rpc category in GitHub rpc catelogy.
> > It has been widely used in Baidu, with 1,000,000+ instances and
> thousands kinds of services.
> > Besides, many other companies have already used it also, such as Iqiyi,
> Didi, Sougou, BiliBili etc.
> >
> >
> > === Meritocracy ===
> >
> > brpc was originally created by Ge Jun and Chen zhangyi inside baidu from
> 2014.
> > Since its opensource in 2017, it has already followed meritocracy
> principles.
> > It accepts multiple contributions from other companies.
> > And now, the core developers are from several different companies.
> >
> > We will follow Apache way to encourage more developers to contribute in
> this project.
> > We know that only active and committed developers from a diverse set of
> backgrounds
> > can make brpc a successful project.
> >
> >
> > === Community ===
> >
> > brpc has been building an active community since its open source.
> Currently,
> > the community includes over 31 contributors.
> > The core developers of brpc are listed below.
> >
> > === Core Developers ===
> >
> >   * Ge Jun(https://github.com/jamesge 
> jge...@gmail.com )
> >   * Chen Zhangyi(https://github.com/chenzhangyi <
> https://github.com/chenzhangyi> frozen@gmail.com  frozen@gmail.com>)
> >   * Jiang Rujie(https://github.com/old-bear 
> jrjb...@gmail.com )
> >   * Zhu Jiashun(http://github.com/zyearn 
> zhujiashun2...@gmail.com )
> >   * Wang Yao(https://github.com/ipconfigme <
> https://github.com/ipconfigme> ipconfi...@gmail.com  ipconfi...@gmail.com>)
> >
> > === Alignment ===
> >
> > brpc is useful for building reliable and high-performance applications.
> > Since ASF has many famous performance-related and rpc-related projects,
> > we believe that ASF is a perfect choice to help brpc project to attract
> > more developers and users as well as having more cooperation with
> existing projects.
> >
> > === Known Risks ===
> >  Orphaned products 
> >
> > Since our core developers are from different companies and many
> companies are using it,
> > the risk of the project being abandoned is minimal.
> > For example, Baidu is extensively using it in their production
> environment
> > and many large corporations including Iqiyi, Didi, Sougou, BiliBili use
> it in their production applications.
> >
> >  Inexperience with Open Source 
> >
> > brpc has been an active open source project for more than one year.
> > During that time, the project has attracted 30+ contributors and gained
> a lot of attention.
> > The core developers are all active users and followers of open source.
> >
> >  Homogenous Developers 
> >
> >

Account for Incubator Wiki

2018-10-02 Thread Jason Dai 
Hi,

I'm a mentor for Apache MXNet, and my Wiki user account is JasonDai. I
wonder if you can help grant me write access right for the Incubator Wiki.

Thanks,
-Jason