Hi, 

Two questions about my boot process: 

first question: 
I've got some messages about routing conflict. Is this normal? How can I fix 
them? Here are 3 lines, full dmesg included below.

IRQ routing conflict for 00:0f.0, have irq 11, want irq 3
IRQ routing conflict for 00:10.0, have irq 11, want irq 3
IRQ routing conflict for 00:10.1, have irq 11, want irq 3

second question:
The  "* Starting USB and PCI hotplugging..." step take forewer.... 18 seconds 
exactly. One second more and my friends' windows boxes will boot faster than 
my linux. dmesg is full of messages about usb and the like. I don't remember 
it used to be like this (a while ago) but I don't know what could have 
changed.

tia

[dmesg follows]
klogd 1.4.1, log source = /proc/kmsg started.
Cannot find map file.
Loaded 501 symbols from 21 modules.
Linux version 2.4.20-gentoo-r7 ([EMAIL PROTECTED]) (version gcc 3.3.1 20030916 
(Gentoo Linux 3.3.1-r4, propolice)) #1 sam oct 11 16:28:18 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
 BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
zone(0): 4096 pages.
zone(1): 126972 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=gentoo ro root=309 failsafe devfs=mount 
hdd=ide-scsi acpi=off
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 2000.248 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3984.58 BogoMIPS
Memory: 512768k/524272k available (1408k kernel code, 8940k reserved, -1720k 
data, 104k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Proc Config support by [EMAIL PROTECTED]
proc config counted 2476 bytes in names
proc config counted 266 bytes in value handles
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(TM) XP 2400+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3227] at 00:11.0
PCI: Found IRQ 3 for device 00:0f.1
IRQ routing conflict for 00:0f.0, have irq 11, want irq 3
IRQ routing conflict for 00:10.0, have irq 11, want irq 3
IRQ routing conflict for 00:10.1, have irq 11, want irq 3
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 79
PCI: Found IRQ 3 for device 00:0f.1
IRQ routing conflict for 00:0f.0, have irq 11, want irq 3
IRQ routing conflict for 00:10.0, have irq 11, want irq 3
IRQ routing conflict for 00:10.1, have irq 11, want irq 3
VP_IDE: chipset revision 6
VP_IDE: not 100%% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci00:0f.1
    ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L090AVV207-0, ATA DISK drive
hdb: Maxtor 5T060H6, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-16102B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c016e1e4, I/O limit 4095Mb (mask 0xffffffff)
hda: 160836480 sectors (82348 MB) w/1821KiB Cache, CHS=10011/255/63, UDMA(100)
blk: queue c016e324, I/O limit 4095Mb (mask 0xffffffff)
hdb: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63, UDMA(100)
hdc: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
 /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 p8 p9 >
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes 
([EMAIL PROTECTED])
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
last message repeated 2 times
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
reiserfs: checking transaction log (device 03:09) ...
Warning, log replay starting on readonly filesystem
reiserfs: replayed 14 transactions in 1 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 104k freed
Adding Swap: 987956k swap-space (priority -1)
Removing [1475388 1475401 0x0 SD]..done
Removing [1474310 1475388 0x0 SD]..done
Removing [3 40 0x0 SD]..done
There were 3 uncompleted unlinks/truncates. Completed
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 9 for device 00:13.0
PCI: Sharing IRQ 9 with 00:09.0
eth0: RealTek RTL8139 Fast Ethernet at 0xe0942000, 00:40:f4:1e:d0:7f, IRQ 9
eth0:  Identified 8139 chip type 'RTL-8139C'
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: LITE-ON   Model: LTR-16102B        Rev: OS09
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 8x/40x writer cd/rw xa/form2 cdda tray
sr0: mmc-3 profile capable, current profile: 2h
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:41) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:46) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:47) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:49) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
PCI: Found IRQ 10 for device 00:0e.0
blk: queue c016e1e4, I/O limit 4095Mb (mask 0xffffffff)
ehci-hcd.c: 2002-May-07 USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-hcd.c: block sizes: qh 96 qtd 96 itd 128 sitd 64
PCI: Assigned IRQ 9 for device 00:10.4
PCI: Sharing IRQ 9 with 00:11.5
hcd.c: ehci-hcd @ 00:10.4, VIA Technologies, Inc. USB 2.0
hcd.c: irq 9, pci mem e0f2e000
usb.c: new USB bus registered, assigned bus number 1
ehci-dbg.c: ehci_start hcs_params 0x4208 dbg=0 cc=4 pcc=2 ordered !ppc ports=8
ehci-dbg.c: ehci_start extended capabilities at pci 104
ehci-dbg.c: ehci_start hcc_params 0x6872 caching 7 uframes 256/512/1024
ehci-hcd.c: reset 80002 cmd (park)=0 ithresh=8 period=1024 Reset HALT
ehci-hcd.c: init 10001 cmd (park)=0 ithresh=1 period=1024 RUN
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
hcd.c: 00:10.4 root hub device address 1
usb.c: kmalloc IF d99349c0, numif 1
usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Manufacturer: Linux 2.4.20-gentoo-r7 ehci-hcd
Product: VIA Technologies, Inc. USB 2.0
SerialNumber: 00:10.4
hub.c: USB hub found
hub.c: 8 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: individual port over-current protection
hub.c: Single TT
hub.c: TT requires at most 8 FS bit times
hub.c: Port indicators are not supported
hub.c: power on to power good time: 0ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRRRRRRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface d99349c0
usb.c: kusbd: /sbin/hotplug add 1
default.hotplug[1154]: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ 
PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 
DEVICE=/proc/bus/usb/001/001 PRODUCT=0/0/204 TYPE=9/0/1 DEBUG=kernel _=/bin/
env)
default.hotplug[1154]: invoke /etc/hotplug/usb.agent ()
usb-uhci.c: $Revision: 1.275 $ time 16:25:19 Oct 11 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 3 for device 00:10.0
IRQ routing conflict for 00:0f.0, have irq 11, want irq 3
PCI: Sharing IRQ 3 with 00:0f.1
IRQ routing conflict for 00:10.0, have irq 11, want irq 3
IRQ routing conflict for 00:10.1, have irq 11, want irq 3
usb-uhci.c: USB UHCI at I/O 0x9400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF d9934c40, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI Root Hub
SerialNumber: 9400
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface d9934c40
usb.c: kusbd: /sbin/hotplug add 1
default.hotplug[1176]: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ 
PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 
DEVICE=/proc/bus/usb/002/001 PRODUCT=0/0/0 TYPE=9/0/0 DEBUG=kernel _=/bin/
env)
default.hotplug[1176]: invoke /etc/hotplug/usb.agent ()
hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
PCI: Found IRQ 3 for device 00:10.1
IRQ routing conflict for 00:0f.0, have irq 11, want irq 3
PCI: Sharing IRQ 3 with 00:0f.1
IRQ routing conflict for 00:10.0, have irq 11, want irq 3
IRQ routing conflict for 00:10.1, have irq 11, want irq 3
usb-uhci.c: USB UHCI at I/O 0x9000, IRQ 11
usb-uhci.c: Detected 2 ports
hub.c: port 1, portstatus 300, change 2, 1.5 Mb/s
hub.c: port 1 enable change, status 300
hub.c: port 2, portstatus 100, change 2, 12 Mb/s
hub.c: port 2 enable change, status 100
usb.c: new USB bus registered, assigned bus number 3
usb.c: kmalloc IF d9934e80, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI Root Hub
SerialNumber: 9000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface d9934e80
usb.c: kusbd: /sbin/hotplug add 1
default.hotplug[1193]: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ 
PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 
DEVICE=/proc/bus/usb/003/001 PRODUCT=0/0/0 TYPE=9/0/0 DEBUG=kernel _=/bin/
env)
default.hotplug[1193]: invoke /etc/hotplug/usb.agent ()
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
ehci-hub.c: GetStatus port 1 status 0x1403 POWER speed=1 CSC CONNECT
hub.c: port 1, portstatus 501, change 1, 480 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 501, change 1, 480 Mb/s
PCI: Found IRQ 4 for device 00:10.2
IRQ routing conflict for 00:10.2, have irq 10, want irq 4
IRQ routing conflict for 00:10.3, have irq 10, want irq 4
usb-uhci.c: USB UHCI at I/O 0x8800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
usb.c: kmalloc IF d9891200, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI Root Hub
SerialNumber: 8800
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface d9891200
usb.c: kusbd: /sbin/hotplug add 1
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
default.hotplug[1210]: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ 
PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 
DEVICE=/proc/bus/usb/004/001 PRODUCT=0/0/0 TYPE=9/0/0 DEBUG=kernel _=/bin/
env)
default.hotplug[1210]: invoke /etc/hotplug/usb.agent ()
PCI: Found IRQ 4 for device 00:10.3
IRQ routing conflict for 00:10.2, have irq 10, want irq 4
IRQ routing conflict for 00:10.3, have irq 10, want irq 4
usb-uhci.c: USB UHCI at I/O 0x8400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
usb.c: kmalloc IF d9891440, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI Root Hub
SerialNumber: 8400
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface d9891440
usb.c: kusbd: /sbin/hotplug add 1
default.hotplug[1227]: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ 
PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 
DEVICE=/proc/bus/usb/005/001 PRODUCT=0/0/0 TYPE=9/0/0 DEBUG=kernel _=/bin/
env)
default.hotplug[1227]: invoke /etc/hotplug/usb.agent ()
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
ehci-hub.c: 00:10.4 port 1 low speed, give to companion
ehci-hub.c: GetStatus port 1 status 0x3402 OWNER POWER speed=1 CSC
hub.c: port 1, portstatus 0, change 1, 12 Mb/s
ehci-hcd.c: 00:10.4: free_config devnum 0
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 3, portstatus 100, change 0, 12 Mb/s
hub.c: port 4, portstatus 100, change 0, 12 Mb/s
hub.c: port 5, portstatus 100, change 0, 12 Mb/s
hub.c: port 6, portstatus 100, change 0, 12 Mb/s
hub.c: port 7, portstatus 100, change 0, 12 Mb/s
hub.c: port 8, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 301, change 1, 1.5 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 301, change 1, 1.5 Mb/s
hub.c: port 1, portstatus 301, change 0, 1.5 Mb/s
last message repeated 3 times
hub.c: port 1, portstatus 303, change 0, 1.5 Mb/s
hub.c: new USB device 00:10.0-1, assigned address 2
usb.c: kmalloc IF d9891580, numif 1
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Logitech
Product: USB Receiver
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x46d/0xc501) is not claimed by any active 
driver.
  Length              = 18
  DescriptorType      = 01
  USB version         = 1.10
  Vendor:Product      = 046d:c501
  MaxPacketSize0      = 8
  NumConfigurations   = 1
  Device version      = 9.10
  Device Class:SubClass:Protocol = 00:00:00
    Per-interface classes
Configuration:
  bLength             =    9
  bDescriptorType     =   02
  wTotalLength        = 0022
  bNumInterfaces      =   01
  bConfigurationValue =   01
  iConfiguration      =   00
  bmAttributes        =   a0
  MaxPower            =   50mA

  Interface: 0
  Alternate Setting:  0
    bLength             =    9
    bDescriptorType     =   04
    bInterfaceNumber    =   00
    bAlternateSetting   =   00
    bNumEndpoints       =   01
    bInterface Class:SubClass:Protocol =   03:01:02
    iInterface          =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   81 (in)
      bmAttributes        =   03 (Interrupt)
      wMaxPacketSize      = 0008
      bInterval           =   0a
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 303, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 1, portstatus 100, change 2, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2, portstatus 100, change 2, 12 Mb/s
hub.c: port 2 enable change, status 100
hub.c: port 1, portstatus 300, change 2, 1.5 Mb/s
hub.c: port 1 enable change, status 300
hub.c: port 2, portstatus 300, change 2, 1.5 Mb/s
hub.c: port 2 enable change, status 300
hub.c: port 1, portstatus 100, change 2, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2, portstatus 100, change 2, 12 Mb/s
hub.c: port 2 enable change, status 100
default.hotplug[1545]: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/ 
PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 
DEVICE=/proc/bus/usb/002/002 INTERFACE=3/1/2 PRODUCT=46d/c501/910 TYPE=0/0/0 
DEBUG=kernel _=/bin/env)
default.hotplug[1545]: invoke /etc/hotplug/usb.agent ()
usb.agent[1154]: Setup usbcore for USB product 0/0/204
usb.agent[1154]: Setup usbcore for USB product 0/0/204
usb.agent[1176]: Setup usbcore for USB product 0/0/0
usb.agent[1176]: Setup usbcore for USB product 0/0/0
usb.agent[1193]: Setup usbcore for USB product 0/0/0
usb.agent[1193]: Setup usbcore for USB product 0/0/0
usb.agent[1210]: Setup usbcore for USB product 0/0/0
usb.agent[1210]: Setup usbcore for USB product 0/0/0
usb.agent[1227]: Setup usbcore for USB product 0/0/0
usb.agent[1227]: Setup usbcore for USB product 0/0/0
usb.agent[1545]: Setup hid for USB product 46d/c501/910
usb.c: registered new driver hid
input0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0
usb.c: hid driver claimed interface d9891580
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
usb.agent[1545]: Setup mousedev for USB product 46d/c501/910
modprobe: modprobe: Can't locate module mousedev
modprobe: modprobe: Can't locate module mousedev
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 320 bytes per conntrack
cron[2525]: (CRON) STARTUP (fork ok) 
init: Activating demand-procedures for 'A'
inserting floppy driver for 2.4.20-gentoo-r7
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
CRON[2915]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) 
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4496  Wed Jul 
16 19:03:09 PDT 2003

-- 
mathieu


--
[EMAIL PROTECTED] mailing list

Reply via email to