Re: [gentoo-user] kde-4.1 SLOT in kdesvn-portage

[Aleksey Kunitskiy]

On Mon, Sep 22, 2008 at 12:14 AM, Alan McKinnon <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I use the kdesvn-portage overlay (the portage one, not the paludis-only one).
> To still stay this side of sanity, I emerged the 4.1.1 SLOT.
>
> I updated layman -S today only to find that the entire kde-4.1 SLOT has been
> removed. Can someone confirm? Am I actually dreaming? Anyone know why a
> perfectly reasonable set of ebuilds were removed?\

It was moved to the kde-testing overlay.
layman -d kdesvn-portage && layman -a kde-testing

-- 
Best regards,
Aleksey Kunitskiy

Re: [gentoo-user] Listing packages that depend on specified package

[Aleksey Kunitskiy]

On Sunday 17 June 2007 20:50, Bo Ørsted Andresen wrote:
> The manifest in the tree was broken 5 hours ago (cvs is retarded!). It
> should be fixed now so if you sync in a couple of hours the fixed manifest
> should be on the rsync mirrors by that time...

Thanks


-- 
best regards,
Aleksey V. Kunitskiy
my public GPG/PGP key: http://www.alexey-kv.org.ua/pubkey.asc


pgpf5WUee5nCc.pgp
Description: PGP signature

Re: [gentoo-user] Listing packages that depend on specified package

[Aleksey Kunitskiy]

On Sunday 17 June 2007 18:46, Bo Ørsted Andresen wrote:
> Packages that depend on <=app-crypt/gnupg-2.0.1 aren't the issue. The fact
> that you have <=app-crypt/gnupg-2.0.1 installed is the issue.
>
> # emerge --unmerge -va \<=app-crypt/gnupg-2.0.1

Thanks
Now I have another problem:

!!! Digest verification failed:
!!! /usr/portage/app-pda/libopensync/libopensync-0.20.ebuild
!!! Reason: Filesize does not match recorded size
!!! Got: 1245
!!! Expected: 1251

Is it my problem or problem with portage ?
How can I correct it ?


-- 
best regards,
Aleksey V. Kunitskiy
my public GPG/PGP key: http://www.alexey-kv.org.ua/pubkey.asc


pgpqSUOd1gnUw.pgp
Description: PGP signature

[gentoo-user] Listing packages that depend on specified package

[Aleksey Kunitskiy]

Hi,

Today I tried to emerge kde-3.5.7 and I had one blocked package:
[blocks B ] <=app-crypt/gnupg-2.0.1 (is blocking app-crypt/gnupg-2.0.4)

How can I list packages that depend on <=app-crypt/gnupg-2.0.1 ?

thanks for any suggestions

-- 
best regards,
Aleksey V. Kunitskiy
my public GPG/PGP key: http://www.alexey-kv.org.ua/pubkey.asc


pgp8VUOKfdGRL.pgp
Description: PGP signature

Re: [gentoo-user] M$ Excel document converter

[Aleksey Kunitskiy]

On Wednesday 13 June 2007 15:04, Boyd Stephen Smith Jr. wrote:
> I am.
>
> Here's a script that will dump a worksheet as a csv.  Save, chmod a+x, and
> invoke like name_of_script name_of_excel_file worksheet_number > csv_file
> (e.g. ./convertxls price_list.xls 0 > price_list.csv):
>
> #! /usr/bin/ruby
> require 'parseexcel'
>
> wb = Spreadsheet::ParseExcel.parse(ARGV.shift)
> ws = workbook.worksheet(ARGV.shift.to_i)
> ws.each { |row|
>   puts row.collect { |cell|
> '"' + cell.to_s.gsub(/"/, '""') + '"'
>   }.join(',')
> }
>
> Clearly, all the heavy lifting is done by that library, which you will need
> to run this script. 

This script doesn't work for me :(
I have ruby & parseexcel installed...

$ ./excel2cvs.rb complect.xls 0 > complect.cvs 
./excel2cvs.rb:5: undefined local variable or method `workbook' for 
main:Object (NameError)



-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

Re: [gentoo-user] M$ Excel document converter

[Aleksey Kunitskiy]

On Wednesday 13 June 2007 14:02, Bertram Scharpf wrote:

> There's a Ruby package `parseexcel' which seems to work as
> far as I can test here.
>
>   

I'm not a ruby programmer :(

-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

Re: [gentoo-user] M$ Excel document converter

[Aleksey Kunitskiy]

On Wednesday 13 June 2007 13:13, Abraham Marín Pérez wrote:
> Have you checked that document's Excel format? Maybe KSpread can't read
> it because of a too new Excel format, try re-saving it in an older one.
>
> HTH,
> Abraham

I don't know what version it is - I get it from internet, and I can't open it 
in M$ Office because I don't have it ;). But I know that OO opens it very 
good

-- 
best regards,
Aleksey V. Kunitskiy
--
[EMAIL PROTECTED] mailing list

Re: [gentoo-user] M$ Excel document converter

[Aleksey Kunitskiy]

On Wednesday 13 June 2007 13:10, Peter Ruskin wrote:
>
> OpenOffice reads (and saves) in M$ Excel format
As I mentioned above - OO is very big tool for my needs
-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

Re: [gentoo-user] M$ Excel document converter

[Aleksey Kunitskiy]

On Wednesday 13 June 2007 12:40, Florian Philipp wrote:
> You can open Excel files with KSpread and Openoffice without an external
> converter. Then you can save them in open document format.
>
> But keep in mind that documents produced by Openoffice are not 100%
> compatible with Koffice documents because they have a different
> implementation for some features.

The problem is that KSpread doesn't read this Excel doc,i.e. the doc is 
unreadable in KSpread. OO is too big for reading one Excel doc once a week :
(, imho

-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

[gentoo-user] M$ Excel document converter

[Aleksey Kunitskiy]

Hi,

Is there any command line converters from M$ Excel to any *nix readable 
format(i.e. for reading in KSpread)? Excel document contains only text and 
pictures - no formulas

thanks

-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

Re: [gentoo-user] KDE (X?) artefacts

[Aleksey Kunitskiy]

On Monday 11 June 2007 17:00, Jesus Guerrero wrote:
> So, your problem is, most likely, to be caused by the lack of such
> extension. Check your xorg.conf, and make sure you have this line on it,
> and it is not commented out.
>
> Load  "extmod"
>
> -- Jesús Guerrero

Thanks! This works for me :)

-- 
best regards,
Aleksey V. Kunitskiy
--
[EMAIL PROTECTED] mailing list

[gentoo-user] KDE (X?) artefacts

[Aleksey Kunitskiy]

HI,

I have strange KDE(or X11?) artefacts on my desktop.
The animation icon near cursor is drawing ugly, in some places I have bad 
painted corners. What is it ?
This doesn't block my work, but maybe I've bad configured KDE/X  :) ?

In first attachment (icon) there is an icon
In second(tooltip) - tolltip with ugly corners

thanks

-- 
best regards,
Aleksey V. Kunitskiy
<><>

Re: [gentoo-user] Moving linux system to another partition

[Aleksey Kunitskiy]

On Friday 08 June 2007 18:59, Albert Hopkins wrote:
> You could also pass, '-x' to cp and rsync or '--one-file-system' to tar.

Thanks. 

I found good howto [1], chapter #7 describes this problem

[1] http://www.tldp.org/HOWTO/Hard-Disk-Upgrade/

-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

[gentoo-user] Moving linux system to another partition

[Aleksey Kunitskiy]

Hi all,

Is it safe to move my linux system by using:
#>cp -rp /mnt/old_part /mnt/new_part
and approriate changes in grub.conf/fstab on new system location ?

-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

Re: [gentoo-user] Changing primary monitor on dual-monitor X.org setup

[Aleksey Kunitskiy]

On Wednesday 06 June 2007 22:40, Florian Philipp wrote:
> Am Mittwoch 06 Juni 2007 20:46 schrieb Aleksey Kunitskiy:
> > On Wednesday 06 June 2007 21:10, Boyd Stephen Smith Jr. wrote:
> > > Or, just switch the Device lines.  Each device is a single DVI port (at
> > > least on my NVidia setup).
> >
> > Section "Screen"
> > Identifier "Screen0"
> > Device "Card1"
> > Monitor"Monitor0"
> > DefaultDepth24
> > SubSection "Display"
> > Modes   "1280x1024"
> > Depth   24
> > EndSubSection
> > EndSection
> >
> > Section "Screen"
> > Identifier "Screen1"
> > Device "Card0"
> > Monitor"Monitor1"
> > DefaultDepth24
> > SubSection "Display"
> > Modes   "1280x1024"
> > Depth   24
> > EndSubSection
> > EndSection
> >
> > Nothing changed. Where I am mistaken ? :(
> >
> > --
> > best regards,
> > Aleksey V. Kunitskiy
>
> You could try to change the entry 'screen' in 'Section "Device"'

I tried to change "Screen" parameter in section "Device" and "Device" param in 
section "Screen" - none of these two variants work for me :(

-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

Re: [gentoo-user] Changing primary monitor on dual-monitor X.org setup

[Aleksey Kunitskiy]

On Wednesday 06 June 2007 21:10, Boyd Stephen Smith Jr. wrote:
> Or, just switch the Device lines.  Each device is a single DVI port (at
> least on my NVidia setup).

Section "Screen"
Identifier "Screen0"
Device "Card1"
Monitor"Monitor0"
DefaultDepth24
SubSection "Display"
Modes   "1280x1024"
Depth   24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card0"
Monitor"Monitor1"
DefaultDepth24
SubSection "Display"
Modes   "1280x1024"
Depth   24
EndSubSection
EndSection

Nothing changed. Where I am mistaken ? :(

-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

Re: [gentoo-user] Changing primary monitor on dual-monitor X.org setup

[Aleksey Kunitskiy]

On Wednesday 06 June 2007 19:54, Dan Farrell wrote:
> Try switching the LeftOf to RightOf.  Is that what you meant?  Or did
> you want to plug the monitors into each others' plugs?  In which case
> >Section "Screen"
> > Identifier "Screen0"
> > Device "Card0"
> > Monitor"Monitor0"
> > DefaultDepth24
> > SubSection "Display"
> > Modes   "1280x1024"
> > Depth   24
> > EndSubSection
> >EndSection
> >
> >Section "Screen"
> > Identifier "Screen1"
> > Device "Card1"
> > Monitor"Monitor1"
> > DefaultDepth24
> > SubSection "Display"
> > Modes   "1280x1024"
> > Depth   24
> > EndSubSection
> >EndSection
>
> Just switch the Monitor lines here, and switch the plugs.

Yes, I want to plug monitors into each others' plugs, but with one thing  - 
without switching monitor plugs physically. I switched monitor lines there 
but it changed nothing. Screen0 is still on the "first" DVI out and Screen1 
is on the "second" DVI out, I need vice versa

I think that I have to specify in each Monitor section on which DVI out this 
monitor identifier have to be, but I don't know how to do it

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor"Monitor1"
DefaultDepth24
SubSection "Display"
Modes   "1280x1024"
Depth   24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor"Monitor0"
DefaultDepth24
SubSection "Display"
Modes   "1280x1024"
Depth   24
EndSubSection
EndSection

-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list

[gentoo-user] Changing primary monitor on dual-monitor X.org setup

[Aleksey Kunitskiy]

Hi Gentoo community,

I'm new to dual-monitor setups and I have one question to you:
I have Geforce 7950GT graphics card with two independent DVI-I outputs and two 
monitors connected to each DVI out. I configured X.org to use two screens 
separate on these two monitors.
Question: How can I interchange screens between those two monitors? I've 
primary screen always on "first" DVI-out and I want to change it(I want the 
primary screen to be on "second" DVI-out)

Here is my xorg.conf:

/***/
Section "Files"
RgbPath  "/usr/share/X11/rgb"
ModulePath   "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath"/usr/share/fonts/terminus"
FontPath"/usr/share/fonts/corefonts"
EndSection

Section "Module"
#   Load  "dri"
Load  "dbe"
#   Load  "record"
#   Load  "xtrap"
Load  "glx"
#   Load  "extmod"
Load  "freetype"
#   Load  "type1"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver  "kbd"
Option  "XkbRules"  "xorg"
Option  "XkbModel"  "pc105"
Option  "XkbLayout" "us,ru(winkeys)"
Option  "XkbOptions""grp:caps_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver  "mouse"
Option  "Protocol" "auto"
Option  "Device" "/dev/input/mice"
Option  "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier   "Monitor0"
VendorName   "Samsung"
ModelName"SyncMaster 971P"
EndSection

Section "Monitor"
Identifier   "Monitor1"
VendorName   "Samsung"
ModelName"SyncMaster 971P"
EndSection


Section "Device"
Identifier  "Card1"
Driver  "nvidia"
VendorName  "nVidia Corporation"
BoardName   "ASUS EN7950GT"
Option  "RenderAccel"   "true"
BusID   "PCI:1:0:0"
Screen  0
EndSection

Section "Device"
Identifier  "Card0"
Driver  "nvidia"
VendorName  "nVidia Corporation"
BoardName   "ASUS EN7950GT"
Option  "RenderAccel"   "true"
BusID   "PCI:1:0:0"
Screen  1
EndSection


Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor"Monitor0"
DefaultDepth24
SubSection "Display"
Modes   "1280x1024"
Depth   24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor"Monitor1"
DefaultDepth24
SubSection "Display"
Modes   "1280x1024"
Depth   24
EndSubSection
EndSection

Section "ServerLayout"
Identifier  "Layout 1"
Screen  0 "Screen0" 0 0
Screen  1 "Screen1" LeftOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0""CorePointer"
EndSection
/***/

-- 
best regards,
Aleksey V. Kunitskiy
-- 
[EMAIL PROTECTED] mailing list