[gentoo-user] Intel Gigabit Ethernet problem
Hi list, I've been struggling with this for a while, I am setting up this new machine, but got stuck because I can't find a way to make the network card work... According to lspci: 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) The weird thing is, it works just fine when booting the LiveCD, dmesg shows: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: :02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:10:c6:a1:5a:41 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/1000 speed: disabling TSO but when booting the local kernel: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection and the interface is not created, neither the watchdog part of dmesg that shows in the LiveCD appears, and thus, no network connection. I've tried different kernels, with the same result (the LiveCD has the 2.6.19-gentoo-r5, and I've tried this and 2.6.21-gentoo-r4. Tried compiled in the kernel, as module, modprobe -r, nothing works... Any help would be much appreciated! -- Daniel da Veiga Computer Operator - RS - Brazil -BEGIN GEEK CODE BLOCK- Version: 3.1 GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V- PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++ --END GEEK CODE BLOCK-- -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Intel Gigabit Ethernet problem
On Mon, 2007-07-30 at 13:33 -0300, Daniel da Veiga wrote: Hi list, I've been struggling with this for a while, I am setting up this new machine, but got stuck because I can't find a way to make the network card work... According to lspci: 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) The weird thing is, it works just fine when booting the LiveCD, dmesg shows: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: :02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:10:c6:a1:5a:41 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/1000 speed: disabling TSO but when booting the local kernel: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection It appears as if driver works and has created the device but... Have you configured the device in /etc/conf.d/net? Have you added net.eth0 to the default runlevel? http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=4chap=1 -- Albert W. Hopkins -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Intel Gigabit Ethernet problem
On 7/30/07, Albert Hopkins [EMAIL PROTECTED] wrote: On Mon, 2007-07-30 at 13:33 -0300, Daniel da Veiga wrote: Hi list, I've been struggling with this for a while, I am setting up this new machine, but got stuck because I can't find a way to make the network card work... According to lspci: 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) The weird thing is, it works just fine when booting the LiveCD, dmesg shows: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: :02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:10:c6:a1:5a:41 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/1000 speed: disabling TSO but when booting the local kernel: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection It appears as if driver works and has created the device but... The device was not created (and yeah, that's weird since there's a mention to eth0 in dmesg), also the init script is there and there is a config for the interface at rc.conf/net. It seems the probe is not working, as it never detects the link is up or down... -- Daniel da Veiga Computer Operator - RS - Brazil -BEGIN GEEK CODE BLOCK- Version: 3.1 GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V- PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++ --END GEEK CODE BLOCK-- -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Intel Gigabit Ethernet problem
Daniel da Veiga wrote: On 7/30/07, Albert Hopkins [EMAIL PROTECTED] wrote: On Mon, 2007-07-30 at 13:33 -0300, Daniel da Veiga wrote: Hi list, I've been struggling with this for a while, I am setting up this new machine, but got stuck because I can't find a way to make the network card work... According to lspci: 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) The weird thing is, it works just fine when booting the LiveCD, dmesg shows: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: :02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:10:c6:a1:5a:41 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/1000 speed: disabling TSO but when booting the local kernel: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection It appears as if driver works and has created the device but... The device was not created (and yeah, that's weird since there's a mention to eth0 in dmesg), also the init script is there and there is a config for the interface at rc.conf/net. It seems the probe is not working, as it never detects the link is up or down... What does ifconfig -a return? A lot of times udev will remap the device name. Especially if there is IP over firewall. --Joshua Doll -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Intel Gigabit Ethernet problem
Joshua Doll wrote: Daniel da Veiga wrote: On 7/30/07, Albert Hopkins [EMAIL PROTECTED] wrote: On Mon, 2007-07-30 at 13:33 -0300, Daniel da Veiga wrote: Hi list, I've been struggling with this for a while, I am setting up this new machine, but got stuck because I can't find a way to make the network card work... According to lspci: 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) The weird thing is, it works just fine when booting the LiveCD, dmesg shows: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: :02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:10:c6:a1:5a:41 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/1000 speed: disabling TSO but when booting the local kernel: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection It appears as if driver works and has created the device but... The device was not created (and yeah, that's weird since there's a mention to eth0 in dmesg), also the init script is there and there is a config for the interface at rc.conf/net. It seems the probe is not working, as it never detects the link is up or down... What does ifconfig -a return? A lot of times udev will remap the device name. Especially if there is IP over firewall. --Joshua Doll Opps firewire not firewall. Long weekend. --Joshua Doll -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Intel Gigabit Ethernet problem
On 7/30/07, Joshua Doll [EMAIL PROTECTED] wrote: Joshua Doll wrote: Daniel da Veiga wrote: On 7/30/07, Albert Hopkins [EMAIL PROTECTED] wrote: On Mon, 2007-07-30 at 13:33 -0300, Daniel da Veiga wrote: Hi list, I've been struggling with this for a while, I am setting up this new machine, but got stuck because I can't find a way to make the network card work... According to lspci: 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) The weird thing is, it works just fine when booting the LiveCD, dmesg shows: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: :02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:10:c6:a1:5a:41 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/1000 speed: disabling TSO but when booting the local kernel: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection It appears as if driver works and has created the device but... The device was not created (and yeah, that's weird since there's a mention to eth0 in dmesg), also the init script is there and there is a config for the interface at rc.conf/net. It seems the probe is not working, as it never detects the link is up or down... What does ifconfig -a return? A lot of times udev will remap the device name. Especially if there is IP over firewall. --Joshua Doll Opps firewire not firewall. Long weekend. Happens to me all the time... ifconfig -a shows only lo. I tried some crazy stunts (like copying the module from the livecd) and now I got the interface listed, but it doesn't work and yells a lot of SIOCSIFFLAGS: Function not implemented messages, along with Unable to allocate interrupt Error: -38 in dmesg. I'm in the process of recompiling the kernel right now, and I hope that will solve it (so far I only compiled the kernel while in the LiveCD chroot, but now I have all packages and thus I'm trying to compile it at the real system). That should make no difference, but I'm trying everything... -- Daniel da Veiga Computer Operator - RS - Brazil -BEGIN GEEK CODE BLOCK- Version: 3.1 GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V- PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++ --END GEEK CODE BLOCK-- -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Intel Gigabit Ethernet problem
On 7/30/07, Daniel da Veiga [EMAIL PROTECTED] wrote: On 7/30/07, Joshua Doll [EMAIL PROTECTED] wrote: Joshua Doll wrote: Daniel da Veiga wrote: On 7/30/07, Albert Hopkins [EMAIL PROTECTED] wrote: On Mon, 2007-07-30 at 13:33 -0300, Daniel da Veiga wrote: Hi list, I've been struggling with this for a while, I am setting up this new machine, but got stuck because I can't find a way to make the network card work... According to lspci: 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) The weird thing is, it works just fine when booting the LiveCD, dmesg shows: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: :02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:10:c6:a1:5a:41 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/1000 speed: disabling TSO but when booting the local kernel: Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt :02:00.0[A] - GSI 16 (level, low) - IRQ 17 PCI: Setting latency timer of device :02:00.0 to 64 e1000: eth0: e1000_probe: Intel PRO/1000 Network Connection It appears as if driver works and has created the device but... The device was not created (and yeah, that's weird since there's a mention to eth0 in dmesg), also the init script is there and there is a config for the interface at rc.conf/net. It seems the probe is not working, as it never detects the link is up or down... What does ifconfig -a return? A lot of times udev will remap the device name. Especially if there is IP over firewall. --Joshua Doll Opps firewire not firewall. Long weekend. Happens to me all the time... ifconfig -a shows only lo. I tried some crazy stunts (like copying the module from the livecd) and now I got the interface listed, but it doesn't work and yells a lot of SIOCSIFFLAGS: Function not implemented messages, along with Unable to allocate interrupt Error: -38 in dmesg. I'm in the process of recompiling the kernel right now, and I hope that will solve it (so far I only compiled the kernel while in the LiveCD chroot, but now I have all packages and thus I'm trying to compile it at the real system). That should make no difference, but I'm trying everything... Ok, after a few reboots (more like a lot), I wiped out all traces of the kernel and configs, along with all modules, and started from scratch my new kernel build, and guess... It's working... Thank you for the replies. -- Daniel da Veiga Computer Operator - RS - Brazil -BEGIN GEEK CODE BLOCK- Version: 3.1 GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V- PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++ --END GEEK CODE BLOCK-- -- [EMAIL PROTECTED] mailing list
