RE: [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel
t found for command 0x40045612! ivtv0: Initialized WinTV PVR 250, card #0 ivtv: END INIT IVTV [EMAIL PROTECTED] ~ $ And here's the diff: [EMAIL PROTECTED] ~ $ diff ivtv-2.6.14-r5 ivtv-2.6.15-r1 3c3 < ivtv: Linux version: 2.6.14-gentoo-r5 SMP 486 gcc-3.4 --- > ivtv: Linux version: 2.6.15-gentoo-r1 SMP 486 gcc-3.4 10,15d9 < tveeprom: ivtv version < tveeprom: Hauppauge: model = 32552, rev = C168, serial# = 8059944 < tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) < tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x1000) < tveeprom: audio processor = MSP4448 (type = 1b) < tveeprom: decoder processor = SAA7115 (type = 13) 17c11,17 < tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 --- > tveeprom 0-0050: Hauppauge model 32552, rev C168, serial# 8059944 > tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is MSP4448 (idx 27) > tveeprom 0-0050: decoder processor is SAA7115 (idx 19) > tveeprom 0-0050: has radio, has no IR remote > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) 19,22c19,20 < saa7115 0-0021: ivtv driver < saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) < ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] < msp3400 0-0040: ivtv driver --- > ivtv0: Failed to load module saa7115 > ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b! 26c24 < tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) --- > tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) 35c33,38 < tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 --- > tuner 0-0061: type set to 47 (LG NTSC (TAPE series)) > ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618! > ivtv0 warning: i2c client addr: 0x21 not found for command 0xc0045627! > ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618! > ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045613! > ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045612! [EMAIL PROTECTED] ~ $ As you can see, there was a failure to load module saa7115 and several warnings about client addresses not being found, among other things. I have no idea why these things are happening or how to fix them... > When you do a ivtv-tune -f xxx.xx to set frequency. camille ~ # ivtv-tune -f xxx.xx /dev/video0: 0.000 MHz (Signal Detected) > After that cat /dev/video0 > test.mpg and you playback test.mpg is that OK > (or you do mplayer /dev/video0) camille ~ # cat /dev/video0 > test.mpg camille ~ # ls -lh test.mpg -rw-r--r-- 1 root root 0 Mar 14 11:03 test.mpg Nothing. What should I do now? > > > > -Original Message- > From: Michael Sullivan [mailto:[EMAIL PROTECTED] > Sent: Monday, March 13, 2006 7:39 PM > To: gentoo-user > Subject: [gentoo-user] OT - Need help getting MythTV to work with new(er) > kernel > > I had MythTV working perfectly with linux-2.6.14-gentoo-r5. I've tried > to upgrade to linux-2.6.15-gentoo-r1 using genkernel and basing the > newer kernel's configuration off of the older one. I've booted with the > new kernel, remerged ivtv and rebooted again with the new kernel, but > still I cannot watch LiveTV in mythfrontend. Here's the output of > mythbackend.log: > > camille ~ # cat /var/log/mythtv/mythbackend.log > Starting up as the master server. > > It is current (I stopped mythbackend, deleted the old mythbackend.log, > restarted syslog-ng and then mythbackend.) When I start mythfrontend > and ask to watch LiveTV, all I see is the blank screen. Here is the > output of running mythfrontend from my terminal: > > [EMAIL PROTECTED] ~ $ mythfrontend > 2006-03-13 13:30:34.209 New DB connection, total: 1 > Total desktop width=1024, height=768, numscreens=1 > 2006-03-13 13:30:34.229 Using screen 0, 1024x768 at 0,0 > 2006-03-13 13:30:34.249 mythfrontend version: 0.18.1.20050510-1 > www.mythtv.org > 2006-03-13 13:30:34.250 Enabled verbose msgs : important general > 2006-03-13 13:30:34.526 Switching to square mode (G.A.N.T.) > mythtv: could not connect to socket > mythtv: No such file or directory > lirc_init failed for mythtv, see preceding messages > 2006-03-13 13:30:34.952 Joystick disabled. > 2006-03-13 13:30:35.069 Registering Internal as a media playback plugin. > 2006-03-13 13:30:40.671 New DB connection, total: 2 > 2006-03-13 13:30:40.710 Connecting to backend server: 192.168.1.3:6543 > (try 1 of 5) > 2006-03-13 13:30:40.733 Using protocol version 15 > 2006-03-13 13:30:40.890 Using protocol version 15 > 2006-03-13 13:30:46.209 taking too long to be allowed to read.. > 2006-03-13 13:30:51.213 taking t
RE: [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel
Hi, If you check dmesg, is everything OK loading ivtv? You should see the ivtv messages between two lines. Using diff to compare the dmesg output for different kernels has led me to getting things to work. When you do a ivtv-tune -f xxx.xx to set frequency. After that cat /dev/video0 > test.mpg and you playback test.mpg is that OK (or you do mplayer /dev/video0) -Original Message- From: Michael Sullivan [mailto:[EMAIL PROTECTED] Sent: Monday, March 13, 2006 7:39 PM To: gentoo-user Subject: [gentoo-user] OT - Need help getting MythTV to work with new(er) kernel I had MythTV working perfectly with linux-2.6.14-gentoo-r5. I've tried to upgrade to linux-2.6.15-gentoo-r1 using genkernel and basing the newer kernel's configuration off of the older one. I've booted with the new kernel, remerged ivtv and rebooted again with the new kernel, but still I cannot watch LiveTV in mythfrontend. Here's the output of mythbackend.log: camille ~ # cat /var/log/mythtv/mythbackend.log Starting up as the master server. It is current (I stopped mythbackend, deleted the old mythbackend.log, restarted syslog-ng and then mythbackend.) When I start mythfrontend and ask to watch LiveTV, all I see is the blank screen. Here is the output of running mythfrontend from my terminal: [EMAIL PROTECTED] ~ $ mythfrontend 2006-03-13 13:30:34.209 New DB connection, total: 1 Total desktop width=1024, height=768, numscreens=1 2006-03-13 13:30:34.229 Using screen 0, 1024x768 at 0,0 2006-03-13 13:30:34.249 mythfrontend version: 0.18.1.20050510-1 www.mythtv.org 2006-03-13 13:30:34.250 Enabled verbose msgs : important general 2006-03-13 13:30:34.526 Switching to square mode (G.A.N.T.) mythtv: could not connect to socket mythtv: No such file or directory lirc_init failed for mythtv, see preceding messages 2006-03-13 13:30:34.952 Joystick disabled. 2006-03-13 13:30:35.069 Registering Internal as a media playback plugin. 2006-03-13 13:30:40.671 New DB connection, total: 2 2006-03-13 13:30:40.710 Connecting to backend server: 192.168.1.3:6543 (try 1 of 5) 2006-03-13 13:30:40.733 Using protocol version 15 2006-03-13 13:30:40.890 Using protocol version 15 2006-03-13 13:30:46.209 taking too long to be allowed to read.. 2006-03-13 13:30:51.213 taking too long to be allowed to read.. 2006-03-13 13:31:00.218 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:04.222 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:08.226 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:12.230 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:16.234 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:20.238 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:24.242 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:28.246 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:28.247 Waited 14 seconds for data to become available, aborting Couldn't read file: rbuf://192.168.1.3:6543/mnt/store//ringbuf1.nuv 2006-03-13 13:31:28.303 Changing from None to WatchingLiveTV 2006-03-13 13:31:28.303 Decoder not alive, and trying to play.. 2006-03-13 13:31:48.307 ReadStringList timeout (quick). Remote encoder not responding. 2006-03-13 13:31:48.323 Changing from None to None 2006-03-13 13:31:58.483 ReadStringList timeout (quick). 2006-03-13 13:31:58.483 RemoteFile::Read(): No response from control socket. 2006-03-13 13:31:58.483 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-03-13 13:31:58.495 WriteStringList: Bad socket 2006-03-13 13:31:58.495 ReadStringList: Bad socket 2006-03-13 13:31:58.495 Remote file timeout. I see there: mythtv: could not connect to socket mythtv: No such file or directory But mythbackend IS running; from another teminal tab I issue this: camille ~ # ps ax | grep 'mythbackend' 12762 ?Ss 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12766 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12767 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12769 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12770 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12771 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12772 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12773 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12774 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12775 ?S 0:00 /usr/bi
[gentoo-user] OT - Need help getting MythTV to work with new(er) kernel
I had MythTV working perfectly with linux-2.6.14-gentoo-r5. I've tried to upgrade to linux-2.6.15-gentoo-r1 using genkernel and basing the newer kernel's configuration off of the older one. I've booted with the new kernel, remerged ivtv and rebooted again with the new kernel, but still I cannot watch LiveTV in mythfrontend. Here's the output of mythbackend.log: camille ~ # cat /var/log/mythtv/mythbackend.log Starting up as the master server. It is current (I stopped mythbackend, deleted the old mythbackend.log, restarted syslog-ng and then mythbackend.) When I start mythfrontend and ask to watch LiveTV, all I see is the blank screen. Here is the output of running mythfrontend from my terminal: [EMAIL PROTECTED] ~ $ mythfrontend 2006-03-13 13:30:34.209 New DB connection, total: 1 Total desktop width=1024, height=768, numscreens=1 2006-03-13 13:30:34.229 Using screen 0, 1024x768 at 0,0 2006-03-13 13:30:34.249 mythfrontend version: 0.18.1.20050510-1 www.mythtv.org 2006-03-13 13:30:34.250 Enabled verbose msgs : important general 2006-03-13 13:30:34.526 Switching to square mode (G.A.N.T.) mythtv: could not connect to socket mythtv: No such file or directory lirc_init failed for mythtv, see preceding messages 2006-03-13 13:30:34.952 Joystick disabled. 2006-03-13 13:30:35.069 Registering Internal as a media playback plugin. 2006-03-13 13:30:40.671 New DB connection, total: 2 2006-03-13 13:30:40.710 Connecting to backend server: 192.168.1.3:6543 (try 1 of 5) 2006-03-13 13:30:40.733 Using protocol version 15 2006-03-13 13:30:40.890 Using protocol version 15 2006-03-13 13:30:46.209 taking too long to be allowed to read.. 2006-03-13 13:30:51.213 taking too long to be allowed to read.. 2006-03-13 13:31:00.218 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:04.222 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:08.226 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:12.230 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:16.234 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:20.238 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:24.242 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:28.246 Waited 4 seconds for data to become available, waiting again... 2006-03-13 13:31:28.247 Waited 14 seconds for data to become available, aborting Couldn't read file: rbuf://192.168.1.3:6543/mnt/store//ringbuf1.nuv 2006-03-13 13:31:28.303 Changing from None to WatchingLiveTV 2006-03-13 13:31:28.303 Decoder not alive, and trying to play.. 2006-03-13 13:31:48.307 ReadStringList timeout (quick). Remote encoder not responding. 2006-03-13 13:31:48.323 Changing from None to None 2006-03-13 13:31:58.483 ReadStringList timeout (quick). 2006-03-13 13:31:58.483 RemoteFile::Read(): No response from control socket. 2006-03-13 13:31:58.483 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-03-13 13:31:58.495 WriteStringList: Bad socket 2006-03-13 13:31:58.495 ReadStringList: Bad socket 2006-03-13 13:31:58.495 Remote file timeout. I see there: mythtv: could not connect to socket mythtv: No such file or directory But mythbackend IS running; from another teminal tab I issue this: camille ~ # ps ax | grep 'mythbackend' 12762 ?Ss 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12766 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12767 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12769 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12770 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12771 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12772 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12773 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12774 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12775 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12776 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12777 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12792 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12793 ?S 0:00 /usr/bin/mythbackend --verbose none --logfile /var/log/mythtv/mythbackend.log 12821 pts/1S+ 0:00 grep mythbackend camille ~ # I would post the new kernel config, but since it's based off the old kernel config, and the