Re: [gentoo-user] nvidia card problems
Enrico Weigelt wrote: * Dale wrote: You may want to check and make sure this is compiled into your kernel. CONFIG_SYSVIPC Are they really still using that old cruft ? ;-o cu I don't know about its age but I do know my card would not work until I built that in my kernel. As long as it works, whos worried about age? ;-) Dale :-) :-)
Re: [gentoo-user] nvidia card problems
* Dale wrote: > You may want to check and make sure this is compiled into your kernel. > > CONFIG_SYSVIPC Are they really still using that old cruft ? ;-o cu -- -- Enrico Weigelt, metux IT service -- http://www.metux.de/ phone: +49 36207 519931 email: weig...@metux.de mobile: +49 151 27565287 icq: 210169427 skype: nekrad666 -- Embedded-Linux / Portierung / Opensource-QM / Verteilte Systeme --
Re: [gentoo-user] nvidia card problems
On Tuesday 25 January 2011 10:55:51 Zhu Sha Zang wrote: > With these vga card > > 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 7025 > / nForce 630a] (rev a2) > > > after compiling x11-drivers/nvidia-drivers-260.19.36 with these flags > (acpi gtk multilib) i'm receiving this messages when i try to startx: > > in dmesg: > > nvidia: module license 'NVIDIA' taints kernel. > ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22 > nvidia :00:0d.0: PCI INT A -> Link[LMC9] -> GSI 22 (level, low) -> > IRQ 22 > nvidia :00:0d.0: setting latency timer to 64 > vgaarb: device changed decodes: > PCI::00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem > NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.36 Tue Jan 18 > 16:56:11 PST 2011 > nvidia :00:0d.0: PCI INT A disabled > > and in /var/log/Xorg.0.log > > [ 1191.890] (II) NVIDIA dlloader X Driver 260.19.36 Tue Jan 18 > 16:57:32 PST 2011 > [ 1191.890] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs > [ 1191.891] (--) using VT number 7 > > [ 1191.902] (EE) No devices detected. > [ 1191.902] > Fatal server error: > [ 1191.902] no screens found > [ 1191.902] > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > [ 1191.902] Please also check the log file at "/var/log/Xorg.0.log" for > additional information. > [ 1191.902] > > > This appear using a ancient xorg.conf. > > > Trying to made a new configuration with X -confugure the errors is that: > > [root@sakurazukamori ~rodolfo]$ X -configure > > 10:52 > > This is a pre-release version of the X server from The X.Org Foundation. > It is not supported in any way. > Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. > Select the "xorg" product for bugs you find in this release. > Before reporting bugs in pre-release versions please check the > latest version in the X.Org Foundation git repository. > See http://wiki.x.org/wiki/GitPage for git access instructions. > > X.Org X Server 1.9.3.901 (1.9.4 RC 1) > Release Date: 2011-01-07 > X Protocol Version 11, Revision 0 > Build Operating System: Linux 2.6.37-gentoo-sakura x86_64 Gentoo > Current Operating System: Linux sakurazukamori 2.6.37-gentoo-sakura #3 > SMP PREEMPT Tue Jan 25 10:11:30 BRST 2011 x86_64 > Kernel command line: auto BOOT_IMAGE=Gentoo ro root=801 > Build Date: 24 January 2011 10:40:47AM > > Current version of pixman: 0.20.2 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 25 10:53:02 2011 > List of video drivers: > nv > vesa > v4l > nvidia > fbdev > (++) Using config file: "/root/xorg.conf.new" > (==) Using system config directory "/usr/share/X11/xorg.conf.d" > (EE) NV: The PCI device 0x10de03d6 ((null)) at 00@00:13:0 has a kernel > module claiming it. > (EE) NV: This driver cannot operate until it has been unloaded. > Number of created screens does not match number of detected devices. > Configuration failed. > > > I need some light here. > > Thanks for now. please post: xorg.conf used Xorg.0.log dmesg lsmod you can have nv and nvidia installed at the same time. But of course you can not use nv if the nvidia module is loaded. And you can not use nvidia if you have nvidiafb or nouveau drivers built into the kernel/loaded as modules.
Re: [gentoo-user] nvidia card problems
On Tuesday 25 January 2011 13:55:51 Zhu Sha Zang wrote: > With these vga card > > 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 7025 > / nForce 630a] (rev a2) > > > after compiling x11-drivers/nvidia-drivers-260.19.36 with these flags > (acpi gtk multilib) i'm receiving this messages when i try to startx: > > in dmesg: > Trying to made a new configuration with X -confugure the errors is that: > > [root@sakurazukamori ~rodolfo]$ X -configure > > 10:52 > > This is a pre-release version of the X server from The X.Org Foundation. > It is not supported in any way. > Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. > Select the "xorg" product for bugs you find in this release. > Before reporting bugs in pre-release versions please check the > latest version in the X.Org Foundation git repository. > See http://wiki.x.org/wiki/GitPage for git access instructions. > > X.Org X Server 1.9.3.901 (1.9.4 RC 1) > Release Date: 2011-01-07 > X Protocol Version 11, Revision 0 > Build Operating System: Linux 2.6.37-gentoo-sakura x86_64 Gentoo > Current Operating System: Linux sakurazukamori 2.6.37-gentoo-sakura #3 > SMP PREEMPT Tue Jan 25 10:11:30 BRST 2011 x86_64 > Kernel command line: auto BOOT_IMAGE=Gentoo ro root=801 > Build Date: 24 January 2011 10:40:47AM > > Current version of pixman: 0.20.2 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 25 10:53:02 2011 > List of video drivers: > nv > vesa > v4l > nvidia > fbdev > (++) Using config file: "/root/xorg.conf.new" > (==) Using system config directory "/usr/share/X11/xorg.conf.d" > (EE) NV: The PCI device 0x10de03d6 ((null)) at 00@00:13:0 has a kernel > module claiming it. > (EE) NV: This driver cannot operate until it has been unloaded. > Number of created screens does not match number of detected devices. > Configuration failed. > > > I need some light here. > > Thanks for now. In your second attempt, it is trying to load "nv", which is incompatible with the nvidia-drivers. I have the following in my /etc/make.conf: -- VIDEO_CARDS="nvidia" -- This is to ensure that only the necessary drivers are actually installed. Adding other drivers here will have them being added. You could try removing the following drivers from your system: nv (x11-drivers/xf86-video-nv) vesa (x11-drivers/xf86-video-vesa) fbdev (x11-drivers/xf86-video-fbdev) v4l (x11-drivers/xf86-video-v4l) And then re-running the "X -configure". -- Joost
Re: [gentoo-user] nvidia card problems
Zhu Sha Zang wrote: With these vga card 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 7025 / nForce 630a] (rev a2) after compiling x11-drivers/nvidia-drivers-260.19.36 with these flags (acpi gtk multilib) i'm receiving this messages when i try to startx: in dmesg: nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22 nvidia :00:0d.0: PCI INT A -> Link[LMC9] -> GSI 22 (level, low) -> IRQ 22 nvidia :00:0d.0: setting latency timer to 64 vgaarb: device changed decodes: PCI::00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.36 Tue Jan 18 16:56:11 PST 2011 nvidia :00:0d.0: PCI INT A disabled and in /var/log/Xorg.0.log [ 1191.890] (II) NVIDIA dlloader X Driver 260.19.36 Tue Jan 18 16:57:32 PST 2011 [ 1191.890] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 1191.891] (--) using VT number 7 [ 1191.902] (EE) No devices detected. [ 1191.902] Fatal server error: [ 1191.902] no screens found [ 1191.902] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 1191.902] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 1191.902] This appear using a ancient xorg.conf. Trying to made a new configuration with X -confugure the errors is that: [root@sakurazukamori ~rodolfo]$ X -configure 10:52 This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.9.3.901 (1.9.4 RC 1) Release Date: 2011-01-07 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.37-gentoo-sakura x86_64 Gentoo Current Operating System: Linux sakurazukamori 2.6.37-gentoo-sakura #3 SMP PREEMPT Tue Jan 25 10:11:30 BRST 2011 x86_64 Kernel command line: auto BOOT_IMAGE=Gentoo ro root=801 Build Date: 24 January 2011 10:40:47AM Current version of pixman: 0.20.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 25 10:53:02 2011 List of video drivers: nv vesa v4l nvidia fbdev (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) NV: The PCI device 0x10de03d6 ((null)) at 00@00:13:0 has a kernel module claiming it. (EE) NV: This driver cannot operate until it has been unloaded. Number of created screens does not match number of detected devices. Configuration failed. I need some light here. Thanks for now. You may want to check and make sure this is compiled into your kernel. CONFIG_SYSVIPC I ran into problems a while back on my new rig and that was missing. It worked fine after adding that to the kernel. May not be your problem but worth checking for sure. Dale :-) :-)
[gentoo-user] nvidia card problems
With these vga card 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 7025 / nForce 630a] (rev a2) after compiling x11-drivers/nvidia-drivers-260.19.36 with these flags (acpi gtk multilib) i'm receiving this messages when i try to startx: in dmesg: nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22 nvidia :00:0d.0: PCI INT A -> Link[LMC9] -> GSI 22 (level, low) -> IRQ 22 nvidia :00:0d.0: setting latency timer to 64 vgaarb: device changed decodes: PCI::00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.36 Tue Jan 18 16:56:11 PST 2011 nvidia :00:0d.0: PCI INT A disabled and in /var/log/Xorg.0.log [ 1191.890] (II) NVIDIA dlloader X Driver 260.19.36 Tue Jan 18 16:57:32 PST 2011 [ 1191.890] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 1191.891] (--) using VT number 7 [ 1191.902] (EE) No devices detected. [ 1191.902] Fatal server error: [ 1191.902] no screens found [ 1191.902] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 1191.902] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 1191.902] This appear using a ancient xorg.conf. Trying to made a new configuration with X -confugure the errors is that: [root@sakurazukamori ~rodolfo]$ X -configure 10:52 This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.9.3.901 (1.9.4 RC 1) Release Date: 2011-01-07 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.37-gentoo-sakura x86_64 Gentoo Current Operating System: Linux sakurazukamori 2.6.37-gentoo-sakura #3 SMP PREEMPT Tue Jan 25 10:11:30 BRST 2011 x86_64 Kernel command line: auto BOOT_IMAGE=Gentoo ro root=801 Build Date: 24 January 2011 10:40:47AM Current version of pixman: 0.20.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 25 10:53:02 2011 List of video drivers: nv vesa v4l nvidia fbdev (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) NV: The PCI device 0x10de03d6 ((null)) at 00@00:13:0 has a kernel module claiming it. (EE) NV: This driver cannot operate until it has been unloaded. Number of created screens does not match number of detected devices. Configuration failed. I need some light here. Thanks for now.