[gentoo-user] udev upgrade and non-working eth0
Hi, I upgraded to udev-103 yesterday. Since then, my internet hasn't been working. I connect through eth0, which is a VIA Rhine adapter on my motherboard. ifconfig shows the link to be up. But, I can't even ping the gateway through eth0. I get destination unreachable replies. This is what syslog tells me after bootup: Nov 27 19:11:14 mrugeshkarnik kernel: eth0: link down And this is the ifconfig output: eth0 Link encap:Ethernet HWaddr 00:0D:88:45:C1:C9 inet addr:10.40.37.47 Bcast:10.40.37.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:18 Base address:0xe000 I don't see a RUNNING flag in there.. What do I do? I'm completely stuck without the internet on Gentoo.. :( Thanks in advance. Mrugesh. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] udev upgrade and non-working eth0
Hi, I upgraded to udev-103 yesterday. Since then, my internet hasn't been working. I connect through eth0, which is a VIA Rhine adapter on my motherboard. ifconfig shows the link to be up. But, I can't even ping the gateway through eth0. I get destination unreachable replies. This is what syslog tells me after bootup: Nov 27 19:11:14 mrugeshkarnik kernel: eth0: link down And this is the ifconfig output: eth0 Link encap:Ethernet HWaddr 00:0D:88:45:C1:C9 inet addr:10.40.37.47 Bcast:10.40.37.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:18 Base address:0xe000 I don't see a RUNNING flag in there.. What do I do? I'm completely stuck without the internet on Gentoo.. :( Thanks in advance. Mrugesh. -- gentoo-user@gentoo.org mailing list Hello, Do you have coldplug installed ? What's the content of /etc/conf.d/net ? Could you post more debugging information please because it's difficult t osolve your problem with your information... It seems that your interface is configured with a private adress, which isn't normal... What's the output of route -n too please ? Regards. Blackhawk -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] udev upgrade and non-working eth0
On 27 November 2006 15:58, Mrugesh Karnik wrote: And this is the ifconfig output: eth0 Link encap:Ethernet HWaddr 00:0D:88:45:C1:C9 inet addr:10.40.37.47 Bcast:10.40.37.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:18 Base address:0xe000 I don't see a RUNNING flag in there.. There's UP at the begin of the thrid line. What does route -n say? Uwe -- Mark Twain: I rather decline two drinks than a German adjective. http://www.SysEx.com.na -- gentoo-user@gentoo.org mailing list