Re: [gentoo-user] Fwd: VFS does not find /dev/sda3 (8,3), Kernel Panic
Am Freitag, 13. Mai 2005 10:23 schrieb ext Zeno Davatz: I took the /proc/config.gz from the chrooted and mounted system and compiled a new kernel off it. I made sure that all the SATA drivers are (*) and not (M). No, you didn't. All (!?) hardware drivers are M, they (or better, the one for your controller) should be *. When configuring your kernel look into SCSI low-level drivers and enable the driver for your controller. HTH... Dirk -- Dirk Heinrichs | Tel: +49 (0)162 234 3408 Configuration Manager | Fax: +49 (0)211 47068 111 Capgemini Deutschland | Mail: [EMAIL PROTECTED] Hambornerstraße 55 | Web: http://www.capgemini.com D-40472 Düsseldorf | ICQ#: 110037733 GPG Public Key C2E467BB | Keyserver: www.keyserver.net pgpu5jqTkpEMw.pgp Description: PGP signature
Re: [gentoo-user] Fwd: VFS does not find /dev/sda3 (8,3), Kernel Panic
Yes, sorry, your are right. To much configuring in my brain. Check the new config. I suppose I only need the Intel PII/ICH SATA support (as my lspci tells me). But I get the same result; a Kernel Panic VFS not found (8,3)... but my HDD is on /dev/sda3. Is there any why I can get more detailed info out of my kernel-boot (except from my screen)? Any other hints? Thanks for your help. Zeno On 5/13/05, Dirk Heinrichs [EMAIL PROTECTED] wrote: Am Freitag, 13. Mai 2005 10:23 schrieb ext Zeno Davatz: I took the /proc/config.gz from the chrooted and mounted system and compiled a new kernel off it. I made sure that all the SATA drivers are (*) and not (M). No, you didn't. All (!?) hardware drivers are M, they (or better, the one for your controller) should be *. When configuring your kernel look into SCSI low-level drivers and enable the driver for your controller. HTH... Dirk -- Dirk Heinrichs | Tel: +49 (0)162 234 3408 Configuration Manager | Fax: +49 (0)211 47068 111 Capgemini Deutschland | Mail: [EMAIL PROTECTED] Hambornerstraße 55 | Web: http://www.capgemini.com D-40472 Düsseldorf | ICQ#: 110037733 GPG Public Key C2E467BB | Keyserver: www.keyserver.net config Description: Binary data
Re: [gentoo-user] Fwd: VFS does not find /dev/sda3 (8,3), Kernel Panic
ok, will try. I'm starting from scratch again. I managed to boot twice ;)) but then I changed something in /etc/rc.conf and now no more boot but only Kernel Panics. What is the name of the PATA driver? My Primary IDE is PATA. My CD-Rom is attached to that. My secondary IDE is SATA. This is so strange. Thanks for your help. Zeno On 5/13/05, Dirk Heinrichs [EMAIL PROTECTED] wrote: Am Freitag, 13. Mai 2005 12:03 schrieb ext Zeno Davatz: Yes, sorry, your are right. To much configuring in my brain. Check the new config. I suppose I only need the Intel PII/ICH SATA support (as my lspci tells me). But I get the same result; a Kernel Panic VFS not found (8,3)... but my HDD is on /dev/sda3. Is there any why I can get more detailed info out of my kernel-boot (except from my screen)? In make menuconfig, the help text for this driver says: This option enables support for ICH5 Serial ATA. If PATA support was enabled previously, this enables support for select Intel PIIX/ICH PATA host controllers. Maybe you should switch off PATA first. HTH... Dirk -- Dirk Heinrichs | Tel: +49 (0)162 234 3408 Configuration Manager | Fax: +49 (0)211 47068 111 Capgemini Deutschland | Mail: [EMAIL PROTECTED] Hambornerstraße 55 | Web: http://www.capgemini.com D-40472 Düsseldorf | ICQ#: 110037733 GPG Public Key C2E467BB | Keyserver: www.keyserver.net -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Fwd: VFS does not find /dev/sda3 (8,3), Kernel Panic
Ok, thanks for all your help, I found out: it was a faulty (new !! SATA disk). Thanks again Zeno On 5/13/05, Dirk Heinrichs [EMAIL PROTECTED] wrote: Am Freitag, 13. Mai 2005 12:03 schrieb ext Zeno Davatz: Yes, sorry, your are right. To much configuring in my brain. Check the new config. I suppose I only need the Intel PII/ICH SATA support (as my lspci tells me). But I get the same result; a Kernel Panic VFS not found (8,3)... but my HDD is on /dev/sda3. Is there any why I can get more detailed info out of my kernel-boot (except from my screen)? In make menuconfig, the help text for this driver says: This option enables support for ICH5 Serial ATA. If PATA support was enabled previously, this enables support for select Intel PIIX/ICH PATA host controllers. Maybe you should switch off PATA first. HTH... Dirk -- Dirk Heinrichs | Tel: +49 (0)162 234 3408 Configuration Manager | Fax: +49 (0)211 47068 111 Capgemini Deutschland | Mail: [EMAIL PROTECTED] Hambornerstraße 55 | Web: http://www.capgemini.com D-40472 Düsseldorf | ICQ#: 110037733 GPG Public Key C2E467BB | Keyserver: www.keyserver.net -- gentoo-user@gentoo.org mailing list
