Re: [Geoserver-users] Trouble with Image Mosaic (.tif)
Hi, we use overalapping TIFFs all the time (satellite images do overlap a lot) without any such issue, but it requires setting transparency/nodata/footprint so that the parts of the file that do not have valid pixels are ignored Cheers Andrea On Tue, Sep 26, 2017 at 1:39 PM, user154654 via Geoserver-users < geoserver-users@lists.sourceforge.net> wrote: > Problem was that tiff files were overlapping so I had to move overlapping > tiffs to different layers and create a layer group. > > Since I was checking logs on production onvironment I guess I misjudged > time > of my GetMap requests or there was actualy a bad layer /bellow/ the tiff > layer and that is why I "connected" those warnings with blank areas. > > > > -- > Sent from: http://osgeo-org.1560.x6.nabble.com/GeoServer-User- > f3786390.html > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: http://geoserver.org/comm/ > userlist-guidelines.html > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Regards, Andrea Aime == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Trouble with Image Mosaic (.tif)
Problem was that tiff files were overlapping so I had to move overlapping tiffs to different layers and create a layer group. Since I was checking logs on production onvironment I guess I misjudged time of my GetMap requests or there was actualy a bad layer /bellow/ the tiff layer and that is why I "connected" those warnings with blank areas. -- Sent from: http://osgeo-org.1560.x6.nabble.com/GeoServer-User-f3786390.html -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Trouble with Image Mosaic (.tif)
This matter is temporary set aside, will let you know how it went. -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Trouble-with-Image-Mosaic-tif-tp5326504p5327254.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Trouble with Image Mosaic (.tif)
Yeah, I'm guessing that when the env function integration was added, legend generation was not updated to consider the possibility of expressions in the colormap entries. Can anyone open a ticket with an example style? Seems like a good candidate for the monthly bug fix code sprint Cheers Andrea On Wed, Jul 5, 2017 at 7:55 AM, Jose Antoniowrote: > Hi, > Validation does not work with env function, but if you send de style > directly to geoserver without validation it works. > In fact, the same file with type="values" allows the previsualization of > the legend, but not with type="intervals". > > Regards > Jose > > El 5 jul. 2017 1:39, "user154654 via Geoserver-users" < > geoserver-users@lists.sourceforge.net> escribió: > >> Hi, how would I validate this file? >> >> >> >> -- >> View this message in context: http://osgeo-org.1560.x6.nabbl >> e.com/Trouble-with-Image-Mosaic-tif-tp5326504p5326572.html >> Sent from the GeoServer - User mailing list archive at Nabble.com. >> >> >> -- >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >> ___ >> Geoserver-users mailing list >> >> Please make sure you read the following two resources before posting to >> this list: >> - Earning your support instead of buying it, but Ian Turton: >> http://www.ianturton.com/talks/foss4g.html#/ >> - The GeoServer user list posting guidelines: >> http://geoserver.org/comm/userlist-guidelines.html >> >> Geoserver-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/geoserver-users >> > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: http://geoserver.org/comm/ > userlist-guidelines.html > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > > -- Regards, Andrea Aime == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user
Re: [Geoserver-users] Trouble with Image Mosaic (.tif)
Hi, Validation does not work with env function, but if you send de style directly to geoserver without validation it works. In fact, the same file with type="values" allows the previsualization of the legend, but not with type="intervals". Regards Jose El 5 jul. 2017 1:39, "user154654 via Geoserver-users" < geoserver-users@lists.sourceforge.net> escribió: > Hi, how would I validate this file? > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/Trouble-with-Image-Mosaic-tif-tp5326504p5326572.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: http://geoserver.org/comm/ > userlist-guidelines.html > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Trouble with Image Mosaic (.tif)
Hi, how would I validate this file? -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Trouble-with-Image-Mosaic-tif-tp5326504p5326572.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
Re: [Geoserver-users] Trouble with Image Mosaic (.tif)
It looks like you have a broken world file - can you find the world file for that tiff and check it? Ian On 3 July 2017 at 14:51, user154654 via Geoserver-users < geoserver-users@lists.sourceforge.net> wrote: > Hello. > 1) Layer *L* was created - Image Mosaic from .tif files. > 2) Layer group *LG* was created and *L* added to it. > 3) When viewing the layer there is a spot where layer is blank although > there should be images. I have openend .tif file and checked, the marked > are > is blank http://prntscr.com/fr34ty. > > Geoserver provides following messages: > /2017-07-03 16:24:50,048 WARN [lite.gridcoverage2d] - Could not reduce the > grid geometry inside the valid area bounds: > ReferencedEnvelope[-21.0 : 69.0, -90.0 : 90.0] Grid geometry > isGridGeometry2D[GridEnvelope2D[35013..37139, 40792..42918], > PARAM_MT["Affine", PARAMETER["num_row", 3], PARAMETER["num_col", 3], > PARAMETER["elt_0_0", 2.75], PARAMETER["elt_0_2", 475001.375], > PARAMETER["elt_1_1", -2.75], PARAMETER["elt_1_2", 6259998.625]]] > 2017-07-03 16:24:50,171 WARN [gdal.BaseGDALGridCoverage2DReader] - Using > default coordinate reference system > 2017-07-03 16:24:50,188 WARN [coverageio.gdal] - Not all the values were > found for this world file! > org.geotools.data.DataSourceException: Not all the values were found for > this world file! at > org.geotools.data.WorldFileReader.parseWorldFile(WorldFileReader.java:231) > at org.geotools.data.WorldFileReader.(WorldFileReader.java:128) at > org.geotools.data.WorldFileReader.(WorldFileReader.java:110)/ > > What is the problem? > > > > -- > View this message in context: http://osgeo-org.1560.x6. > nabble.com/Trouble-with-Image-Mosaic-tif-tp5326504.html > Sent from the GeoServer - User mailing list archive at Nabble.com. > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: http://geoserver.org/comm/ > userlist-guidelines.html > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users > -- Ian Turton -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
[Geoserver-users] Trouble with Image Mosaic (.tif)
Hello. 1) Layer *L* was created - Image Mosaic from .tif files. 2) Layer group *LG* was created and *L* added to it. 3) When viewing the layer there is a spot where layer is blank although there should be images. I have openend .tif file and checked, the marked are is blank http://prntscr.com/fr34ty. Geoserver provides following messages: /2017-07-03 16:24:50,048 WARN [lite.gridcoverage2d] - Could not reduce the grid geometry inside the valid area bounds: ReferencedEnvelope[-21.0 : 69.0, -90.0 : 90.0] Grid geometry isGridGeometry2D[GridEnvelope2D[35013..37139, 40792..42918], PARAM_MT["Affine", PARAMETER["num_row", 3], PARAMETER["num_col", 3], PARAMETER["elt_0_0", 2.75], PARAMETER["elt_0_2", 475001.375], PARAMETER["elt_1_1", -2.75], PARAMETER["elt_1_2", 6259998.625]]] 2017-07-03 16:24:50,171 WARN [gdal.BaseGDALGridCoverage2DReader] - Using default coordinate reference system 2017-07-03 16:24:50,188 WARN [coverageio.gdal] - Not all the values were found for this world file! org.geotools.data.DataSourceException: Not all the values were found for this world file! at org.geotools.data.WorldFileReader.parseWorldFile(WorldFileReader.java:231) at org.geotools.data.WorldFileReader.(WorldFileReader.java:128) at org.geotools.data.WorldFileReader.(WorldFileReader.java:110)/ What is the problem? -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Trouble-with-Image-Mosaic-tif-tp5326504.html Sent from the GeoServer - User mailing list archive at Nabble.com. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users