Re: [Gimp-user] gimp print help?
On 9/7/06, Russbucket [EMAIL PROTECTED] wrote: On Thursday 07 September 2006 19:57, Helen wrote: In my attempt to set up Gimp so I could print from Gimp, I have messed up my printer and made things worse.Now nothing will print.Printing worked just fine until I tried to improve it. I'm using SuSE 10 on Linux, Gimp 2.2.10. HP Deskjet printer 5550 I downloaded gutenprint-5.0.0.tar.bz2 from sourceforge. In Yast, I now have 3 PPD files showing for my Deskjet5550. They are HPDeskJet5550 Foomatic/hpijs (recommended)(manufacturer-PPDs/hplip/HP-Deskjet_5550-hpijs.ppd.gz) 2nd one is HP Deskjet 5550 Foomatic/hpijs (recommended) (HP-Deskjet_5550- hpijs.ppd) 3rd is HP Deskjet 5550 Foomatic/gimp-print (recommended) (HJP/Deskjet_5550-gimp-print.ppd.gz) None will print. Print commands are going to the print queue. When I use command line I get: [EMAIL PROTECTED]:~/Documents lp test.txt request id is deskjet5550-27 (1 file(s)) [EMAIL PROTECTED]:~/Documents I've disconnected my printer and rebooted with no printer attached, then reinstalled my deskjet and rebooted.Still nothing will print. I can see that cups is running. I don't know where to go from here. Can anyone help? Helen After you downloaded the gutenprint tar file did you tar it and then compileit? If you did you follow the steps in the INSTALL or README files aboutrebuilding the PPD files for CUPS.Then you probably need to log on to the CUPS Page with your browser(http://localhost:631/admin) and create the printer. You will need tobe the cups admin. You can use the lppasswd command to setup a admin ID ifyour root. Hope this gives you some ideas.--RussThanks. I looked, and it's clearly over my head. I don't even know how to get in, so I probably should not be there.Why is gutenprint so difficult? Is it the version of gimp that Im using ( 2.2.10) ? I think it might be easier to updateto a later version of gimp, than to figure out what has gone wrong here.I relly need to print, but since installing gutenprint, I cannot print anything, even from the hpdeskjet ppd. I would appreciate any ideas as to how I should proceed.I don't know how to get into cups admin mode, and it might not be a safe thing to do anyway,Helen ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
Re: [Gimp-user] gimp print help?
Hi, you might have more luck if you asked this on a gutenprint list. The plug-in you are using is not developed or maintained by the people who develop GIMP. Have you had a look at gutenprint.org? Sven ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
Re: [Gimp-user] Gimp print
On 6/30/05, Gary Montalbine [EMAIL PROTECTED] wrote: do not have a print capability. I tried to install gimpprint 4.2.7 rpm however it wants libgimp 1.2.so. Print worked OK with an earlier 2.2 You may want to ask the gimp-print list. Although it appears your RPM is the wrong one - it's a RPM intended for a 1.2 version of The GIMP. That's ancient. Is that the only 4.2.7 RPM you can find for your system? -- ~Mike ___ Gimp-user mailing list Gimp-user@lists.xcf.berkeley.edu http://lists.xcf.berkeley.edu/mailman/listinfo/gimp-user
Re: [Gimp-user] Gimp print
michael chang wrote: On 6/30/05, Gary Montalbine [EMAIL PROTECTED] wrote: do not have a print capability. I tried to install gimpprint 4.2.7 rpm however it wants libgimp 1.2.so. Print worked OK with an earlier 2.2 You may want to ask the gimp-print list. Although it appears your RPM is the wrong one - it's a RPM intended for a 1.2 version of The GIMP. That's ancient. Is that the only 4.2.7 RPM you can find for your system? I installed gutenprint 5.0 from Mandriva cooker and I am now able to print. Gary ___ Gimp-user mailing list Gimp-user@lists.xcf.berkeley.edu http://lists.xcf.berkeley.edu/mailman/listinfo/gimp-user
Re: [Gimp-user] Gimp-print border
* Gary Montalbine [EMAIL PROTECTED] [10-17-04 18:32]: ... Off and on for the past year I have tried to figure out how to change the default margins in gimp-print. I have searched, googled read the archives and have not found a way to change the default margins. I particulary find the .5 left margin troublesome. I have the latest HP driver installed. I hope there is an easy solution. I have lots of pictures with uneven borders. lpoptions man lpoptions my results for epson stylus photo 925 job-sheets=none,none ImageableArea=Letter PageRegion=Letter PageSize=Letter PaperDimension=Letter PrintoutMode=Normal.Gray Contrast=1.000 Cyan=1.000 Density=1.000 Magenta=1.000 Yellow=1.000 _kde-filters=true cpi=12 lpi=10 page-bottom=36 page-left=11 page-right=18 page-top=7 position=top-left stpBrightness=1.000 stpGamma=1.600 stpSaturation=1.00 page-bottom=36 page-left=11 page-right=18 page-top=7 magrin widths are in points (pt) where 1 pt = 1/72 = 0.35 mm Options set with the lpoptions command are used by the lp and lpr commands when submitting jobs. (the lpoptions command is unique to CUPS). You didn't say what print system you employe. -- Patrick ShanahanRegistered Linux User #207535 http://wahoo.no-ip.org@ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/photos ___ Gimp-user mailing list [EMAIL PROTECTED] http://lists.xcf.berkeley.edu/mailman/listinfo/gimp-user