Re: [PATCH] clone: fix colliding file detection on APFS
On Tue, Nov 20, 2018 at 8:35 PM Carlo Arenas wrote: > IMHO it would be ideal if test would be enabled/validated for windows > (native, not only cygwin) as it might even work without the override > and if we are to see conflicts, that is probably where most users with > file insensitive filesystems might be found Yes but I can't test on Windows so I will not enable the test until I got a report that it's working there. -- Duy
Re: [PATCH] clone: fix colliding file detection on APFS
Tested-by: Carlo Marcelo Arenas Belón in macOS 10.14.1 with APFS in Linux using VFAT (for the lulz) IMHO it would be ideal if test would be enabled/validated for windows (native, not only cygwin) as it might even work without the override and if we are to see conflicts, that is probably where most users with file insensitive filesystems might be found Carlo
Re: [PATCH] clone: fix colliding file detection on APFS
On 20/11/2018 16:28, Nguyễn Thái Ngọc Duy wrote: > Commit b878579ae7 (clone: report duplicate entries on case-insensitive > filesystems - 2018-08-17) adds a warning to user when cloning a repo > with case-sensitive file names on a case-insensitive file system. The > "find duplicate file" check was doing by comparing inode number (and > only fall back to fspathcmp() when inode is known to be unreliable > because fspathcmp() can't cover all case folding cases). > > The inode check is very simple, and wrong. It compares between a > 32-bit number (sd_ino) and potentially a 64-bit number (st_ino). When > an inode is larger than 2^32 (which seems to be the case for APFS), it > will be truncated and stored in sd_ino, but comparing with itself will > fail. > > As a result, instead of showing a pair of files that have the same > name, we show just one file (marked before the beginning of the > loop). We fail to find the original one. > > The fix could be just a simple type cast (*) > > dup->ce_stat_data.sd_ino == (unsigned int)st->st_ino > > but this is no longer a reliable test, there are 4G possible inodes > that can match sd_ino because we only match the lower 32 bits instead > of full 64 bits. > > There are two options to go. Either we ignore inode and go with > fspathcmp() on Apple platform. This means we can't do accurate inode > check on HFS anymore, or even on APFS when inode numbers are still > below 2^32. > > Or we just to to reduce the odds of matching a wrong file by checking > more attributes, counting mostly on st_size because st_xtime is likely > the same. This patch goes with this direction, hoping that false > positive chances are too small to be seen in practice. > > While at there, enable the test on Cygwin (verified working by Ramsay > Jones) Well, no, I tested the previous version of this patch. However, this patch also passes the test. (Note _test_ singular - in order to check that this patch doesn't cause a regression I would need to run the whole test-suite - that takes 3.5 hours, if I'm not doing anything else!) > > (*) this is also already done inside match_stat_data() > > Reported-by: Carlo Arenas > Helped-by: Ramsay Jones > Signed-off-by: Nguyễn Thái Ngọc Duy > --- > So I'm going with match_stat_data(). But I don't know, perhaps just > ignoring inode (like Carlo's original patch) is safer/better? > > Tested on case-insensitive JFS on Linux. But I don't think it really > matters because I'm not even sure if I could push inode above 2^32 > with this. Hacking JFS for this test sounds fun, but no time for that. > > entry.c | 4 ++-- > t/t5601-clone.sh | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/entry.c b/entry.c > index 5d136c5d55..0a3c451f5f 100644 > --- a/entry.c > +++ b/entry.c > @@ -404,7 +404,7 @@ static void mark_colliding_entries(const struct checkout > *state, > { > int i, trust_ino = check_stat; > > -#if defined(GIT_WINDOWS_NATIVE) > +#if defined(GIT_WINDOWS_NATIVE) || defined(__CYGWIN__) I was a little curious about this (but couldn't be bothered actually read the code, post-application), so I removed this hunk from the patch, rebuilt and ran the test again: it _passed_ the test. :-D So, ... ATB, Ramsay Jones > trust_ino = 0; > #endif > > @@ -419,7 +419,7 @@ static void mark_colliding_entries(const struct checkout > *state, > if (dup->ce_flags & (CE_MATCHED | CE_VALID | CE_SKIP_WORKTREE)) > continue; > > - if ((trust_ino && dup->ce_stat_data.sd_ino == st->st_ino) || > + if ((trust_ino && !match_stat_data(&dup->ce_stat_data, st)) || > (!trust_ino && !fspathcmp(ce->name, dup->name))) { > dup->ce_flags |= CE_MATCHED; > break; > diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh > index f1a49e94f5..c28d51bd59 100755 > --- a/t/t5601-clone.sh > +++ b/t/t5601-clone.sh > @@ -628,7 +628,7 @@ test_expect_success 'clone on case-insensitive fs' ' > ) > ' > > -test_expect_success !MINGW,!CYGWIN,CASE_INSENSITIVE_FS 'colliding file > detection' ' > +test_expect_success !MINGW,CASE_INSENSITIVE_FS 'colliding file detection' ' > grep X icasefs/warning && > grep x icasefs/warning && > test_i18ngrep "the following paths have collided" icasefs/warning >
[PATCH] clone: fix colliding file detection on APFS
Commit b878579ae7 (clone: report duplicate entries on case-insensitive filesystems - 2018-08-17) adds a warning to user when cloning a repo with case-sensitive file names on a case-insensitive file system. The "find duplicate file" check was doing by comparing inode number (and only fall back to fspathcmp() when inode is known to be unreliable because fspathcmp() can't cover all case folding cases). The inode check is very simple, and wrong. It compares between a 32-bit number (sd_ino) and potentially a 64-bit number (st_ino). When an inode is larger than 2^32 (which seems to be the case for APFS), it will be truncated and stored in sd_ino, but comparing with itself will fail. As a result, instead of showing a pair of files that have the same name, we show just one file (marked before the beginning of the loop). We fail to find the original one. The fix could be just a simple type cast (*) dup->ce_stat_data.sd_ino == (unsigned int)st->st_ino but this is no longer a reliable test, there are 4G possible inodes that can match sd_ino because we only match the lower 32 bits instead of full 64 bits. There are two options to go. Either we ignore inode and go with fspathcmp() on Apple platform. This means we can't do accurate inode check on HFS anymore, or even on APFS when inode numbers are still below 2^32. Or we just to to reduce the odds of matching a wrong file by checking more attributes, counting mostly on st_size because st_xtime is likely the same. This patch goes with this direction, hoping that false positive chances are too small to be seen in practice. While at there, enable the test on Cygwin (verified working by Ramsay Jones) (*) this is also already done inside match_stat_data() Reported-by: Carlo Arenas Helped-by: Ramsay Jones Signed-off-by: Nguyễn Thái Ngọc Duy --- So I'm going with match_stat_data(). But I don't know, perhaps just ignoring inode (like Carlo's original patch) is safer/better? Tested on case-insensitive JFS on Linux. But I don't think it really matters because I'm not even sure if I could push inode above 2^32 with this. Hacking JFS for this test sounds fun, but no time for that. entry.c | 4 ++-- t/t5601-clone.sh | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/entry.c b/entry.c index 5d136c5d55..0a3c451f5f 100644 --- a/entry.c +++ b/entry.c @@ -404,7 +404,7 @@ static void mark_colliding_entries(const struct checkout *state, { int i, trust_ino = check_stat; -#if defined(GIT_WINDOWS_NATIVE) +#if defined(GIT_WINDOWS_NATIVE) || defined(__CYGWIN__) trust_ino = 0; #endif @@ -419,7 +419,7 @@ static void mark_colliding_entries(const struct checkout *state, if (dup->ce_flags & (CE_MATCHED | CE_VALID | CE_SKIP_WORKTREE)) continue; - if ((trust_ino && dup->ce_stat_data.sd_ino == st->st_ino) || + if ((trust_ino && !match_stat_data(&dup->ce_stat_data, st)) || (!trust_ino && !fspathcmp(ce->name, dup->name))) { dup->ce_flags |= CE_MATCHED; break; diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index f1a49e94f5..c28d51bd59 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -628,7 +628,7 @@ test_expect_success 'clone on case-insensitive fs' ' ) ' -test_expect_success !MINGW,!CYGWIN,CASE_INSENSITIVE_FS 'colliding file detection' ' +test_expect_success !MINGW,CASE_INSENSITIVE_FS 'colliding file detection' ' grep X icasefs/warning && grep x icasefs/warning && test_i18ngrep "the following paths have collided" icasefs/warning -- 2.19.1.1327.g328c130451.dirty