A note from the maintainer

[Junio C Hamano]

[jc: as I said earlier, I'll be offline for a week, but remembered
that I haven't sent this out for a while---I tried to make a habit
of sending this message out after every feature release, and we had
one recently, so it is a good time to send one from the airport
lounge before I fly out.]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

As an anti-spam measure, the mailing list software rejects messages
that are not text/plain and drops them on the floor.  If you are a
GMail user, you'd want to make sure "Plain text mode" is checked.

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are (mirrored) at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

This one shows not just the main integration branches, but also
individual topics broken out:

  git://github.com/gitster/git/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

As an anti-spam measure, the mailing list software rejects messages
that are not text/plain and drops them on the floor.  If you are a
GMail user, you'd want to make sure "Plain text mode" is checked.

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

This one shows not just the main integration branches, but also
individual topics broken out:

  git://github.com/gitster/git/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manp

Re: A note from the maintainer

[Johannes Schindelin]

Hi Junio,

On Mon, 30 Oct 2017, Junio C Hamano wrote:

> The development is primarily done on the Git mailing list. Help
> requests, feature proposals, bug reports and patches should be sent to
> the list address .  You don't have to be
> subscribed to send messages.  The convention on the list is to keep
> everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
> I am not subscribed".

I have heard about a dozen complaints that mails were simply eaten by the
mailing list. At least some of those cases were due to HTML (or
HTML/plain) mails being quietly dropped, and it caused more than just
minor frustration.

Maybe mention this in your maintainer's note, to help stave off such
problems?

Ciao,
Dscho

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

This one shows not just the main integration branches, but also
individual topics broken out:

  git://github.com/gitster/git/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* H

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

This one shows not just the main integration branches, but also
individual topics broken out:

  git://github.com/gitster/git/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* H

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

This one shows not just the main integration branches, but also
individual topics broken out:

  git://github.com/gitster/git/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* H

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

This one shows not just the main integration branches, but also
individual topics broken out:

  git://github.com/gitster/git/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* H

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

This one shows not just the main integration branches, but also
individual topics broken out:

  git://github.com/gitster/git/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* H

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

This one shows not just the main integration branches, but also
individual topics broken out:

  git://github.com/gitster/git/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* H

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.public-inbox.org/inbox.comp.version-control.git
nntp://news.gmane.org/gmane.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint

Re: A note from the maintainer

[Junio C Hamano]

Jakub Narębski  writes:

> W dniu 03.09.2016 o 04:17, Junio C Hamano pisze:
>
>> Please remember to always state
>> 
>>  - what you wanted to achieve;
>> 
>>  - what you did (the version of git and the command sequence to reproduce
>>the behavior);
>
> I wonder if it be worth adding to not use aliases (or expand them).  I have
> seen quite a few such questions on StackOverflow...

- how others can reproduce what you did (the version of git and
  the command sequence);

perhaps?

>> 
>>  - what you saw happen (X above);
>> 
>>  - what you expected to see (Y above); and
>> 
>>  - how the last two are different.

Re: A note from the maintainer

[Jakub Narębski]

W dniu 03.09.2016 o 04:17, Junio C Hamano pisze:

> Please remember to always state
> 
>  - what you wanted to achieve;
> 
>  - what you did (the version of git and the command sequence to reproduce
>the behavior);

I wonder if it be worth adding to not use aliases (or expand them).  I have
seen quite a few such questions on StackOverflow...

> 
>  - what you saw happen (X above);
> 
>  - what you expected to see (Y above); and
> 
>  - how the last two are different.

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git
nntp://news.public-inbox.org/inbox.comp.version-control.git

are available.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint

Re: A note from the maintainer

[Eric Wong]

Philip Oakley  wrote:
> From: "Eric Wong" 
> >
> >Yes, I was somewhat careful to check for proper mboxes from gmane;
> >I just missed entire ranges :x
> >
> 
> There were a number of messages that were listed by gmane as being in the
> various Git for Windows lists such as msysgit, especially when the messages
> went to both lists (as the issue had common cause) that failed to get onto
> the regualr gmane list.
> 
> Are these something that has been included?

If they were on both lists, yes, gmane seems to miss some of
those messages, unfortunately.

> Philip
> 
> A quick search on a possible message gave
> https://public-inbox.org/git/55bf6808.1000...@web.de/ which has no parent,
> but that parent actually only went to the msysgit list, so no real surprise
> there, but I do remember some other cases that were on list - I just can't
> find them at the moment :-(.

If a message was only posted exclusively on other lists, it
should stay there and it's archives.  public-inbox provides a
way to lookup external messages by Message-ID for this reason.

Is there a way to lookup messages by Message-ID from the msysgit
archives?  I could add it to the existing list of alternate
Message-ID lookup services:

  https://public-inbox.org/meta/20160814054731.26194-...@80x24.org/

GoogleGroups doesn't seem usable without JavaScript at all,
unfortunately :<

I don't think the msysgit archives would be too large and I
wouldn't mind hosting them myself.  But, users on GoogleGroups
may not be used to our conventions and not appreciate having
their unobfuscated addresses exposed or reply-to-all...

I will probably add an option to support centralized lists to
public-inbox sometime, though.  I don't like centralization,
but completely inaccessible archives are worse.
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Philip Oakley]

From: "Eric Wong" 


Yes, I was somewhat careful to check for proper mboxes from gmane;
I just missed entire ranges :x



There were a number of messages that were listed by gmane as being in the 
various Git for Windows lists such as msysgit, especially when the messages 
went to both lists (as the issue had common cause) that failed to get onto 
the regualr gmane list.


Are these something that has been included?

Philip

A quick search on a possible message gave 
https://public-inbox.org/git/55bf6808.1000...@web.de/ which has no parent, 
but that parent actually only went to the msysgit list, so no real surprise 
there, but I do remember some other cases that were on list - I just can't 
find them at the moment :-(.





--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Jeff King]

On Sun, Aug 14, 2016 at 02:12:34AM +, Eric Wong wrote:

> Eric Wong  wrote:
> > Thanks, should all be imported.
> 
> Oops, missed one which was missing X-Mailing-List (causing
> it to not get imported) and had "X-No-Archive: yes" set;
> which meant I couldn't get it from gmane this year.
> 
> Hmm... XNAY defeats the point of public-inbox (and probably the
> point of public-to-all mailing lists); so I don't think it's
> worth honoring.

I didn't even think to look for that header. It looks like it's
basically all one guy. I would argue that it should not be honored for
the git dev list, if only because those emails are a record of the
provenance of patches. The Signed-off-by is a certification that the
patch is OK to submit, but it's presumably worth more with an audit
trail including the email headers.

(Also, I have always found it a little silly to post publicly with a
"please don't anybody record this!" header).

-Peff
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Jeff King]

On Sun, Aug 14, 2016 at 01:27:06AM +, Eric Wong wrote:

> What's also interesting about the thread you highlighed is the
> extra '<>' when you started that thread; and I have a bug where
> I strip off an extra '>' which needs to be fixed...

Oh, that's interesting. It's not in the message that started the thread;
the bug is in the in-reply-to headers of the patches themselves. I don't
remember what I was using to send patches back then. It might have been
send-email, and I suspect I did:

  git send-email --in-reply-to=''

after cutting-and-pasting '' from the cover letter.

> I wonder if I should make "editorial" changes to fixup user bugs,
> but then there's also bunch of messages which are replies to 
> because git-send-email had usability problems back in the day...

I wouldn't go too far in editorial changes. I made a few when skimming
the messages I just sent for spam, and dropped some empty messages, or
"unsubscribe me" ones. But it's not worth the human effort to go back
and scrub list archives from 10 years ago.

Fixing up an extra "<>" is easily done once in your parsing scripts,
though, and I'd be surprised if I'm the only one to have made that
mistake.

> The one which started the thread belonging to
>  was really iffy,

I think I exercised editorial control over similar "your software is now
listed in our archive!" messages in what I sent. But yeah, there's going
to be some spam and some cruft in the archive. It's just a fact of life.
The solution is good searching and organizing tools to find the signal
you're looking for, not to make sure the noise hits zero.

>   git cat-file blob HEAD:b7/5bb577d76487bc9aebf0656d4e03eff22049f4
> 
> is totally legit, but doesn't seem to show up properly,

Heh, yeah, I saw that one (and I think it broke some of my initial
scripting, which foolishly assumed nobody had message-ids with spaces in
them).

-Peff
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Eric Wong]

Eric Wong  wrote:
> Thanks, should all be imported.

Oops, missed one which was missing X-Mailing-List (causing
it to not get imported) and had "X-No-Archive: yes" set;
which meant I couldn't get it from gmane this year.

Hmm... XNAY defeats the point of public-inbox (and probably the
point of public-to-all mailing lists); so I don't think it's
worth honoring.
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Eric Wong]

Jeff King  wrote:
> I collected the message-ids from my archive. Interestingly, I had a
> dozen or so that did not have message-ids at all. I think most of them
> are from patches that put the "From " line in the body, like this one:
> 
>   http://public-inbox.org/git/20070311033833.gb10...@spearce.org/
> 
> and then they got corrupted on a round-trip through one of the bad mbox
> formats (probably downloading from gmane, I'd guess; the export there
> uses mbox, and I use maildir myself, so it probably got split badly
> years ago). Anyway, public-inbox seems to get this case right, which is
> good.

Yes, I was somewhat careful to check for proper mboxes from gmane;
I just missed entire ranges :x

What's also interesting about the thread you highlighed is the
extra '<>' when you started that thread; and I have a bug where
I strip off an extra '>' which needs to be fixed...

I wonder if I should make "editorial" changes to fixup user bugs,
but then there's also bunch of messages which are replies to 
because git-send-email had usability problems back in the day...

> I had several hundred message ids that you didn't. About half of them
> were spam or other junk. I weeded them out manually (mostly by picking
> through the subjects, so possibly there's some error). The end result is
> 279 messages that I think are legitimate that you don't have.
> 
> I'll send them to you off-list, as the mbox is about 300K, which the
> list will reject.

Thanks, should all be imported.

The one which started the thread belonging to
 was really iffy,
but I kept it; as well as an "unsubscribe" one; I guess those
people are shamed for life :)


  git cat-file blob HEAD:b7/5bb577d76487bc9aebf0656d4e03eff22049f4

is totally legit, but doesn't seem to show up properly,
so there's another bug I need to fix.  For the moment, the
following also works:

public-inbox.org/git/b75bb577d76487bc9aebf0656d4e03eff22049f4/
(but I guess it was reposted as <26299.4828321554$1213013...@news.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Jeff King]

On Sat, Aug 13, 2016 at 09:04:32AM +, Eric Wong wrote:

> > Is there an easy way to get _just_ the list of message-ids you are
> > storing (I know I can download the whole archive, but it's big)?
> 
> XHDR (or HDR) over NNTP should do it (that's how I checked
> against gmane):
> 8<-
> use Net::NNTP;
> my $nntp = Net::NNTP->new($ENV{NNTPSERVER} || 'news.public-inbox.org');
> my ($num, $first, $last) = $nntp->group('inbox.comp.version-control.git');
> my $batch = 1;
> my $i;
> for ($i = $first; $i < $last; $i += $batch) {
>   my $j = $i + $batch - 1;
>   $j = $last if $j > $last;
>   my $num2mid = $nntp->xhdr('Message-ID', "$i-$j");
>   for my $n ($i..$j) {
>   defined(my $mid = $num2mid->{$n}) or next;
>   print "$mid\n";
>   }
> }

Thanks, that's perfect.

I collected the message-ids from my archive. Interestingly, I had a
dozen or so that did not have message-ids at all. I think most of them
are from patches that put the "From " line in the body, like this one:

  http://public-inbox.org/git/20070311033833.gb10...@spearce.org/

and then they got corrupted on a round-trip through one of the bad mbox
formats (probably downloading from gmane, I'd guess; the export there
uses mbox, and I use maildir myself, so it probably got split badly
years ago). Anyway, public-inbox seems to get this case right, which is
good.

I had several hundred message ids that you didn't. About half of them
were spam or other junk. I weeded them out manually (mostly by picking
through the subjects, so possibly there's some error). The end result is
279 messages that I think are legitimate that you don't have.

I'll send them to you off-list, as the mbox is about 300K, which the
list will reject.

-Peff
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Eric Wong]

Jeff King  wrote:
> On Fri, Aug 12, 2016 at 10:42:55PM +, Eric Wong wrote:
> > Junio C Hamano  wrote:
> > > is still available.  An alternative
> > > 
> > > nntp://news.public-inbox.org/inbox.comp.version-control.git
> > > 
> > > will become usable once it catches up with old messages.
> > 
> > Mostly caught up, I injected 33 more today which were
> > cross-posted (which tripped up some of my anti-spam rules) or
> > simply missed by gmane.
> > 
> > There may be more in some personal archives gmane doesn't
> > have...
> 
> Is there an easy way to get _just_ the list of message-ids you are
> storing (I know I can download the whole archive, but it's big)?

XHDR (or HDR) over NNTP should do it (that's how I checked
against gmane):
8<-
use Net::NNTP;
my $nntp = Net::NNTP->new($ENV{NNTPSERVER} || 'news.public-inbox.org');
my ($num, $first, $last) = $nntp->group('inbox.comp.version-control.git');
my $batch = 1;
my $i;
for ($i = $first; $i < $last; $i += $batch) {
my $j = $i + $batch - 1;
$j = $last if $j > $last;
my $num2mid = $nntp->xhdr('Message-ID', "$i-$j");
for my $n ($i..$j) {
defined(my $mid = $num2mid->{$n}) or next;
print "$mid\n";
}
}

# and I forgot to optimize XHDR/HDR further in public-inbox-nntpd.
# Oh well, it seems to work, at least.

> Then I can cross-reference with my archive. I doubt I'll have anything
> significant that you don't. My archive of the early days was pulled from
> gmane, though I have been collecting steadily via mailing list delivery
> since 2007 or so.

What's odd is there's some messages with two Message-ID fields
from gmane from the old days, too.  I'll dig a bit another time.
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Jeff King]

On Fri, Aug 12, 2016 at 10:42:55PM +, Eric Wong wrote:

> Junio C Hamano  wrote:
> > For those who prefer to read it over NNTP:
> > 
> > nntp://news.gmane.org/gmane.comp.version-control.git
> > 
> > is still available.  An alternative
> > 
> > nntp://news.public-inbox.org/inbox.comp.version-control.git
> > 
> > will become usable once it catches up with old messages.
> 
> Mostly caught up, I injected 33 more today which were
> cross-posted (which tripped up some of my anti-spam rules) or
> simply missed by gmane.
> 
> There may be more in some personal archives gmane doesn't
> have...

Is there an easy way to get _just_ the list of message-ids you are
storing (I know I can download the whole archive, but it's big)?

Then I can cross-reference with my archive. I doubt I'll have anything
significant that you don't. My archive of the early days was pulled from
gmane, though I have been collecting steadily via mailing list delivery
since 2007 or so.

-Peff
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Eric Wong]

Junio C Hamano  wrote:
> For those who prefer to read it over NNTP:
> 
>   nntp://news.gmane.org/gmane.comp.version-control.git
> 
> is still available.  An alternative
> 
> nntp://news.public-inbox.org/inbox.comp.version-control.git
> 
> will become usable once it catches up with old messages.

Mostly caught up, I injected 33 more today which were
cross-posted (which tripped up some of my anti-spam rules) or
simply missed by gmane.

There may be more in some personal archives gmane doesn't
have...

I've also added NNTP links (including gmane) to the footer in
public-inbox.org/git

> message ID is often the most robust (if not very friendly) way to do
> so, like this:
> 
>   
> http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Some of the generated links have %40 in them which is the URI
escape for '@'.  I'll make a change to keep the '@' unescaped to
lessen confusion.

Due to the use of SQLite as a stable store for NNTP article
numbers; public-inbox can also do partial matching (up to 100
results, currently) to help correct legitimate mistakes; but I
wouldn't rely on it too much:

public-inbox.org/git/Pine.LNX.4.58.0504150753440
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://public-inbox.org/git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

is still available.  An alternative

nntp://news.public-inbox.org/inbox.comp.version-control.git

will become usable once it catches up with old messages.

When you point at a message in a mailing list archive, using its
message ID is often the most robust (if not very friendly) way to do
so, like this:


http://public-inbox.org/git/pine.lnx.4.58.0504150753440.7...@ppc970.osdl.org

Often these web interfaces accept the message ID with enclosing <>
stripped (like the above example to point at one of the most important
message in the Git list).

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* How various branches are used.

There are four br

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

The manual pages formatted in HTML for the tip of 'master' can be
viewed online at:

  https://git.github.io/htmldocs/git.html


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

and rendered in the browser if you visit this page:

  https://git.github.io/htmldocs/git.html

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git

* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "p

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in 

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .  This is
a closed list that is limited to people who need to know early about
vulnerabilities, including:

  - people triaging and fixing reported vulnerabilities
  - people operating major git hosting sites with many users
  - people packaging and distributing git to large numbers of people

where these issues are discussed without risk of the information
leaking out before we're ready to make public announcements.


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in 

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0").

The last such release was 2.8.0 done on Mar 28th, 2016. You can expect
that the tip of the "master"

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0").

The last such release was 2.7.0 done on Jan 4th, 2016. You can expect
that the tip of the "master" 

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.info/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .


* Repositories and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git


* How various branches are used.

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0").

The last such release was 2.7.0 done on Jan 4th, 2016. You can expect
that the tip of the "master" 

Re: A note from the maintainer

[Junio C Hamano]

Thanks.  I've known about the URL moving to marc.info for a long
time, and I am kind of surprised that I had this stale one left
un-updated for so long.

Fixed.

--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: A note from the maintainer

[Xue Fuqiao]

Hi Junio,

Thanks for writing this note!  It is very helpful.

On Fri, Nov 6, 2015 at 7:14 AM, Junio C Hamano  wrote:
> The list archive is available at a few public sites:
>
> http://news.gmane.org/gmane.comp.version-control.git/
> http://marc.theaimsgroup.com/?l=git
> http://www.spinics.net/lists/git/

The second link is broken.  The following link is the correct version
now:

https://marc.info/?l=git
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .


* Repositories, branches and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0").

The last such release was 2.6.0 done on Sep 28th, 2015. You can expect
that the tip of the "master" branch is al

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .


* Repositories, branches and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0").

The last such release was 2.6.0 done on Sep 28th, 2015. You can expect
that the tip of the "master" branch is al

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .


* Repositories, branches and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0").

The last such release was 2.5.0 done on Jul 27th, 2015. You can expect
that the tip of the "master" branch is al

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

There is a volunteer-run newsletter to serve our community ("Git Rev
News" http://git.github.io/rev_news/rev_news.html).

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .


* Repositories, branches and documentation.

My public git.git repositories are at:

  git://git.kernel.org/pub/scm/git/git.git/
  https://kernel.googlesource.com/pub/scm/git/git
  git://repo.or.cz/alt-git.git/
  https://github.com/git/git/
  https://code.google.com/p/git-core/
  git://git.sourceforge.jp/gitroot/git-core/git.git/
  git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

  http://git.kernel.org/cgit/git/git.git
  https://kernel.googlesource.com/pub/scm/git/git
  http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

  git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
  git://repo.or.cz/git-{htmldocs,manpages}.git/
  https://code.google.com/p/git-{htmldocs,manpages}.git/
  https://github.com/gitster/git-{htmldocs,manpages}.git/

Also GitHub shows the manual pages formatted in HTML (with a
formatting backend different from the one that is used to create the
above) at:

  http://git-scm.com/docs/git

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0").

The last such rel

A note from the maintainer

[Junio C Hamano]

[jc: I usually do this at the major release, but because we are
seeing many new folks due to GSoC, and also the newsletter is
getting closer to reality, so here is a special edition.]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

We will soon have a volunteer-run newsletter to serve our community
(http://thread.gmane.org/gmane.comp.version-control.git/266066).  If
you want to help its publication, please contact Christian and/or
Thomas.

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .


* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
https://kernel.googlesource.com/pub/scm/git/git
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

http://git.kernel.org/?p=git/git.git
https://kernel.googlesource.com/pub/scm/git/git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature r

A note from the maintainer

[Junio C Hamano]

[note to regular readers; there are a few updated paragraphs,
regarding our association with SFC and also our security mailing
list.]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

Git is a member project of software freedom conservancy, a non-profit
organization (https://sfconservancy.org/).  To reach a committee of
liaisons to the conservancy, contact them at .


* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

If you think you found a security-sensitive issue and want to disclose
it to us without announcing it to wider public, please contact us at
our security mailing list .


* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
https://kernel.googlesource.com/pub/scm/git/git
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

http://git.kernel.org/?p=git/git.git
https://kernel.googlesource.com/pub/scm/git/git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0"

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
https://kernel.googlesource.com/pub/scm/git/git
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

http://git.kernel.org/?p=git/git.git
https://kernel.googlesource.com/pub/scm/git/git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0").

The last such release was 2.3.0 done on Feb 5th, 2015. You can expect
that the tip of the "master" branch is always more stable than any of
the released versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a
feature release are applied to this branch and maintenance releases
are cut from it.  The maintenance releases used to be named with four
dotted decimal, named after the feature release they

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise may be a sign that those who can evaluate
your patch don't have enough mental/time bandwidth to process them
right at the moment, and it often helps to wait until the list traffic
becomes calmer before sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP:

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes be found on
the #git and #git-devel IRC channels on Freenode.  Their logs are
available at:

http://colabti.org/irclogger/irclogger_log/git
http://colabti.org/irclogger/irclogger_log/git-devel

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
https://kernel.googlesource.com/pub/scm/git/git
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

http://git.kernel.org/?p=git/git.git
https://kernel.googlesource.com/pub/scm/git/git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch.  They used to be
named with three dotted decimal digits (e.g. "1.8.5"), but recently we
switched the versioning scheme and "feature releases" are named with
three-dotted decimal digits that ends with ".0" (e.g. "1.9.0").

The last such release was 2.2.0 done on Nov 26, 2014. You can expect
that the tip of the "master" branch is always more stable than any of
the released versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a
feature release are applied to this branch and maintenance releases
are cut from it.  The maintenance releases used to be named with four
dotted decimal, named after the feature release they 

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise is a sign that people involved don't have
enough mental/time bandwidth to process them right at the moment, and
it often helps to wait until the list traffic becomes calmer before
sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP (including the maintainer):

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes also be found
on the #git IRC channel on Freenode.  Its log is available at:

http://colabti.org/irclogger/irclogger_log/git

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
https://kernel.googlesource.com/pub/scm/git/git
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few web interfaces are found at:

http://git.kernel.org/?p=git/git.git
https://kernel.googlesource.com/pub/scm/git/git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch and they
typically are named with three dotted decimal digits.  The last such
release was 1.8.2 done on Mar 13, 2013. You can expect that the tip of
the "master" branch is always more stable than any of the released
versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a feature
release are applied to this branch and maintenance releases are cut from
it.  The maintenance releases are named with four dotted decimal, named
after the feature release they are updates to; the last such release was
1.8.1.5.  New features never go to this branch.  This branch is also
merged into "master" to propagate the fixes forward as needed.

A new development does not usually happen on "master". When yo

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise is a sign that people involved don't have
enough mental/time bandwidth to process them right at the moment, and
it often helps to wait until the list traffic becomes calmer before
sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP (including the maintainer):

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes also be found
on the #git IRC channel on Freenode.  Its log is available at:

http://colabti.org/irclogger/irclogger_log/git

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few gitweb interfaces are found at:

http://git.kernel.org/?p=git/git.git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch and they
typically are named with three dotted decimal digits.  The last such
release was 1.8.1 done on Dec 31, 2012 (or Jan 1, 2013, depending on
where you were when it happened). You can expect that the tip of the
"master" branch is always more stable than any of the released
versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a feature
release are applied to this branch and maintenance releases are cut from
it.  The maintenance releases are named with four dotted decimal, named
after the feature release they are updates to; the last such release was
1.8.1.2.  New features never go to this branch.  This branch is also
merged into "master" to propagate the fixes forward as needed.

A new development does not usually happen on "master". When you send a
series of patches, after review on th

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise is a sign that people involved don't have
enough mental/time bandwidth to process them right at the moment, and
it often helps to wait until the list traffic becomes calmer before
sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP (including the maintainer):

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes also be found
on the #git IRC channel on Freenode.  Its log is available at:

http://colabti.org/irclogger/irclogger_log/git

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few gitweb interfaces are found at:

http://git.kernel.org/?p=git/git.git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a
"feature release" is cut from the tip of this branch and they
typically are named with three dotted decimal digits.  The last such
release was 1.8.1 done on Dec 31, 2012 (or Jan 1, 2013, depending on
where you were when it happened). You can expect that the tip of the
"master" branch is always more stable than any of the released
versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a feature
release are applied to this branch and maintenance releases are cut from
it.  The maintenance releases are named with four dotted decimal, named
after the feature release they are updates to; the last such release was
1.8.0.3.  New features never go to this branch.  This branch is also
merged into "master" to propagate the fixes forward as needed.

A new development does not usually happen on "master". When you send a
series of patches, after review on th

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise is a sign that people involved don't have
enough mental/time bandwidth to process them right at the moment, and
it often helps to wait until the list traffic becomes calmer before
sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP (including the maintainer):

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes also be found
on the #git IRC channel on Freenode.  Its log is available at:

http://colabti.org/irclogger/irclogger_log/git

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few gitweb interfaces are found at:

http://git.kernel.org/?p=git/git.git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a "feature
release" is cut from the tip of this branch and they typically are named
with three dotted decimal digits.  The last such release was 1.8.0 done on
Oct 21, 2012. You can expect that the tip of the "master" branch is always
more stable than any of the released versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a feature
release are applied to this branch and maintenance releases are cut from
it.  The maintenance releases are named with four dotted decimal, named
after the feature release they are updates to; the last such release was
1.8.0.2.  New features never go to this branch.  This branch is also
merged into "master" to propagate the fixes forward as needed.

A new development does not usually happen on "master". When you send a
series of patches, after review on the mailing list, a separate topic
branch is forked from the tip 

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise is a sign that people involved don't have
enough mental/time bandwidth to process them right at the moment, and
it often helps to wait until the list traffic becomes calmer before
sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP (including the maintainer):

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes also be found
on the #git IRC channel on Freenode.  Its log is available at:

http://colabti.org/irclogger/irclogger_log/git

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few gitweb interfaces are found at:

http://git.kernel.org/?p=git/git.git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a "feature
release" is cut from the tip of this branch and they typically are named
with three dotted decimal digits.  The last such release was 1.8.0 done on
Oct 21, 2012. You can expect that the tip of the "master" branch is always
more stable than any of the released versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a feature
release are applied to this branch and maintenance releases are cut from
it.  The maintenance releases are named with four dotted decimal, named
after the feature release they are updates to; the last such release was
1.7.12.4.  New features never go to this branch.  This branch is also
merged into "master" to propagate the fixes forward as needed.

A new development does not usually happen on "master". When you send a
series of patches, after review on the mailing list, a separate topic
branch is forked from the tip

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise is a sign that people involved don't have
enough mental/time bandwidth to process them right at the moment, and
it often helps to wait until the list traffic becomes calmer before
sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP (including the maintainer):

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes also be found
on the #git IRC channel on Freenode.  Its log is available at:

http://colabti.org/irclogger/irclogger_log/git

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few gitweb interfaces are found at:

http://git.kernel.org/?p=git/git.git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a "feature
release" is cut from the tip of this branch and they typically are named
with three dotted decimal digits.  The last such release was 1.7.12 done on
Aug 19, 2012. You can expect that the tip of the "master" branch is always
more stable than any of the released versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a feature
release are applied to this branch and maintenance releases are cut from
it.  The maintenance releases are named with four dotted decimal, named
after the feature release they are updates to; the last such release was
1.7.12.3.  New features never go to this branch.  This branch is also
merged into "master" to propagate the fixes forward.

A new development does not usually happen on "master". When you send a
series of patches, after review on the mailing list, a separate topic
branch is forked from the tip of "mast

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise is a sign that people involved don't have
enough mental/time bandwidth to process them right at the moment, and
it often helps to wait until the list traffic becomes calmer before
sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP (including the maintainer):

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes also be found
on the #git IRC channel on Freenode.  Its log is available at:

http://colabti.org/irclogger/irclogger_log/git

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few gitweb interfaces are found at:

http://git.kernel.org/?p=git/git.git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a "feature
release" is cut from the tip of this branch and they typically are named
with three dotted decimal digits.  The last such release was 1.7.12 done on
Aug 19, 2012. You can expect that the tip of the "master" branch is always
more stable than any of the released versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a feature
release are applied to this branch and maintenance releases are cut from
it.  The maintenance releases are named with four dotted decimal, named
after the feature release they are updates to; the last such release was
1.7.12.1.  New features never go to this branch.  This branch is also
merged into "master" to propagate the fixes forward.

A new development does not usually happen on "master". When you send a
series of patches, after review on the mailing list, a separate topic
branch is forked from the tip of "mast

A note from the maintainer

[Junio C Hamano]

Welcome to the Git development community.

This message is written by the maintainer and talks about how Git
project is managed, and how you can work with it.

* Mailing list and the community

The development is primarily done on the Git mailing list. Help
requests, feature proposals, bug reports and patches should be sent to
the list address .  You don't have to be
subscribed to send messages.  The convention on the list is to keep
everybody involved on Cc:, so it is unnecessary to say "Please Cc: me,
I am not subscribed".

Before sending patches, please read Documentation/SubmittingPatches
and Documentation/CodingGuidelines to familiarize yourself with the
project convention.

If you sent a patch and you did not hear any response from anybody for
several days, it could be that your patch was totally uninteresting,
but it also is possible that it was simply lost in the noise.  Please
do not hesitate to send a reminder message in such a case.  Messages
getting lost in the noise is a sign that people involved don't have
enough mental/time bandwidth to process them right at the moment, and
it often helps to wait until the list traffic becomes calmer before
sending such a reminder.

The list archive is available at a few public sites:

http://news.gmane.org/gmane.comp.version-control.git/
http://marc.theaimsgroup.com/?l=git
http://www.spinics.net/lists/git/

For those who prefer to read it over NNTP (including the maintainer):

nntp://news.gmane.org/gmane.comp.version-control.git

When you point at a message in a mailing list archive, using
gmane is often the easiest to follow by readers, like this:

http://thread.gmane.org/gmane.comp.version-control.git/27/focus=217

as it also allows people who subscribe to the mailing list as gmane
newsgroup to "jump to" the article.

Some members of the development community can sometimes also be found
on the #git IRC channel on Freenode.  Its log is available at:

http://colabti.org/irclogger/irclogger_log/git

* Reporting bugs

When you think git does not behave as you expect, please do not stop
your bug report with just "git does not work".  "I used git in this
way, but it did not work" is not much better, neither is "I used git
in this way, and X happend, which is broken".  It often is that git is
correct to cause X happen in such a case, and it is your expectation
that is broken. People would not know what other result Y you expected
to see instead of X, if you left it unsaid.

Please remember to always state

 - what you wanted to achieve;

 - what you did (the version of git and the command sequence to reproduce
   the behavior);

 - what you saw happen (X above);

 - what you expected to see (Y above); and

 - how the last two are different.

See http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for further
hints.

* Repositories, branches and documentation.

My public git.git repositories are at:

git://git.kernel.org/pub/scm/git/git.git/
git://repo.or.cz/alt-git.git/
https://github.com/git/git/
https://code.google.com/p/git-core/
git://git.sourceforge.jp/gitroot/git-core/git.git/
git://git-core.git.sourceforge.net/gitroot/git-core/git-core/

A few gitweb interfaces are found at:

http://git.kernel.org/?p=git/git.git
http://repo.or.cz/w/alt-git.git

Preformatted documentation from the tip of the "master" branch can be
found in:

git://git.kernel.org/pub/scm/git/git-{htmldocs,manpages}.git/
git://repo.or.cz/git-{htmldocs,manpages}.git/
https://code.google.com/p/git-{htmldocs,manpages}.git/
https://github.com/gitster/git-{htmldocs,manpages}.git/

You can browse the HTML manual pages at:

http://git-htmldocs.googlecode.com/git/git.html

There are four branches in git.git repository that track the source tree
of git: "master", "maint", "next", and "pu".

The "master" branch is meant to contain what are very well tested and
ready to be used in a production setting.  Every now and then, a "feature
release" is cut from the tip of this branch and they typically are named
with three dotted decimal digits.  The last such release was 1.7.12 done on
Aug 19, 2012. You can expect that the tip of the "master" branch is always
more stable than any of the released versions.

Whenever a feature release is made, "maint" branch is forked off from
"master" at that point.  Obvious, safe and urgent fixes after a feature
release are applied to this branch and maintenance releases are cut from
it.  The maintenance releases are named with four dotted decimal, named
after the feature release they are updates to; the last such release was
1.7.11.5.  New features never go to this branch.  This branch is also
merged into "master" to propagate the fixes forward.

A new development does not usually happen on "master". When you send a
series of patches, after review on the mailing list, a separate topic
branch is forked from the tip of "mast