RE: none
Hello, There are no problems in building the whole Gpg4win installer. It was my mistake, i thought the name of the package was makensis as reported from Terminal, because at first i didn't look at the 'Basic requirements' section in README file. So, i installed all needed packages, and after that, successfully built the Gpg4win installer on Debian 7.2. I have tested the installer on Windows 7 and it works like a charm. Best regards, Nikola From: Werner Koch [w...@gnupg.org] Sent: Friday, October 25, 2013 4:08 PM To: Nikola Radovanovic Cc: Andre Heinecke; gnupg-users@gnupg.org Subject: Re: none On Thu, 24 Oct 2013 20:49, nikola.radovano...@seavus.com said: 1) When trying to build whole Gpg4Win i ran into several problems. Package for gtkhtmlviewer2 couldn't be found, but i have Unfortunately this kind of problems happen from time to time. You may delete the claws-mail tar package from the packages directory to avoid all the Claws dependencies. (instead plugins) on a target url. Then stow was not installed on a system, and i have installed it with apt-get install stow. But Configure should have listed stow as missing, or am I wrong. makensis, which is missing, must be installed also. And it cannot be Under Debian the package is nsis. installed with apt-get. It requires python, scons, zlib and gcc to be installed already, so it is a more complicated process. Werner, if you Sure, that is due to NSIS? If so it would be a Debian packaging bug. Salam-Shalom, Werner -- Die Gedanken sind frei. Ausnahmen regelt ein Bundesgesetz. ___ Gnupg-users mailing list Gnupg-users@gnupg.org http://lists.gnupg.org/mailman/listinfo/gnupg-users
RE: Building Pinentry for Windows
Hello, Thanks for reply. I have did all that you wrote in the previous mail. I have dropped the pinentry.mk that you attached in the email to the mxe/src folder, but it won't work. But, just some moments ago i have successfully built the whole Gpg4Win :), by following the instructions from the README file from the source code. I figured out that the package name for installer is nsis, and not makensis, it is also mentioned in the Basic requirements section of the README file. Right now, by building the whole gpg4win i have succeeded in what i wanted, but i will certainly try again with MXE to see what is the problem there. Thanks for your kind responses. Best regards and cheers to all. Nikola. From: Andre Heinecke [aheine...@intevation.de] Sent: Friday, October 25, 2013 9:28 AM To: Nikola Radovanovic Cc: Werner Koch; gnupg-users@gnupg.org Subject: Re: Building Pinentry for Windows Hi, On Thursday 24 October 2013 20:49:09 Nikola Radovanovic wrote: 1) When trying to build whole Gpg4Win i ran into several problems. Package for gtkhtmlviewer2 couldn't be found, but i have resolved it. This archive is now moved to plugins_obsolete folder (instead plugins) on a target url. Ah, such things happen, i'll see to it that the download url is updated. Then stow was not installed on a system, and i have installed it with apt-get install stow. But makensis, which is missing, must be installed also. And it cannot be installed with apt-get. It requires python, scons, zlib and gcc to be installed already, so it is a more complicated process. Werner, if you can give me some hints about installing makensis it would be great, but anyway i must analyze manual for installing makensis and all dependent components in order to proceed further. makensis is part of the package nsis, which can be installed with apt-get install nsis 2) As far as MXE is concerned, i have built and set successfully all required packages, and built gcc and qt successfully. And finally when it came to build pinentry it failed with message : 'No rule to make target 'pinentry'. Stop.' And that's it. I have downloaded the package and tried to build it manually with commands just like in .mk file, but with no success. Yes pinentry is not included in mxe. I have written a .mk file for it and attached it In my Mail from Wednesday. You should have dropped that pinentry.mk file into the src directory of mxe. Godspeed, Andre -- Andre Heinecke | ++49-541-335083-262 | http://www.intevation.de/ Intevation GmbH, Neuer Graben 17, 49074 Osnabrück | AG Osnabrück, HR B 18998 Geschäftsführer: Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner ___ Gnupg-users mailing list Gnupg-users@gnupg.org http://lists.gnupg.org/mailman/listinfo/gnupg-users
RE: Building pinentry on Windows 7
Thank you very much for your answers, I will try all solutions and after that let you know of the outcome. Best regards, Nikola -Original Message- From: Andre Heinecke [mailto:andre.heine...@intevation.de] Sent: Wednesday, October 23, 2013 10:47 AM To: gnupg-users@gnupg.org Cc: Werner Koch; Nikola Radovanovic Subject: Re: Building pinentry on Windows 7 Hi, On Wednesday 23 October 2013 10:14:37 Werner Koch wrote: However, unless you only want the really ugly native pinentry you need to install lots of libraries first. Thus using the gpg4win installer framework is easier. I've recently played around with MXE ( http://mxe.cc/ ) which is another cross compilation environment that aims to provide an easy way to handle dependencys for Windows. To build a static pinentry-qt4 with it you can just set it up as documented on their homepage. Drop the attached pinentry.mk in mxe/src/ and do make pinentry Worked like a charm for me on a debian wheezy system. Regards, Andre -- Andre Heinecke | ++49-541-335083-262 | http://www.intevation.de/ Intevation GmbH, Neuer Graben 17, 49074 Osnabrück | AG Osnabrück, HR B 18998 Geschäftsführer: Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner ___ Gnupg-users mailing list Gnupg-users@gnupg.org http://lists.gnupg.org/mailman/listinfo/gnupg-users
Building pinentry on Windows 7
Hello, I couldn't find any manual for building pinentry executables for Windows (specifically Windows 7/8). Also for Gpg4Win 2 in general. I know it should be cross-compiled, but there is not some up to date manual on internet, or I couldn't find it. Can you please give some detailed instructions on how to do it on Windows 7. Since I am not subsribed to this mailing list, please add me to CC. Best regards, Nikola Radovanovic ___ Gnupg-users mailing list Gnupg-users@gnupg.org http://lists.gnupg.org/mailman/listinfo/gnupg-users