[gpfsug-discuss] Antwort: [Newsletter] Re: Problem with the gpfsgui - separate networks for daemon and admin

2017-11-15 Thread Matthias . Knigge 
Strange... I think it is the order of configuration changes. Now it works 
with severed networks and FQDN. I configured the admin-interface with 
another network and back to the daemon-network. Then again to the 
admin-interface and it works fine. So the FQDN should be not the problem. 
Sometimes a linux system needs a reboot too. ;-)

Thanks, Matthias




Von:"Andreas Koeninger" 
An: gpfsug-discuss@spectrumscale.org
Kopie:  gpfsug-discuss@spectrumscale.org
Datum:  10.11.2017 13:07
Betreff:[Newsletter] Re: [gpfsug-discuss] Problem with the gpfsgui 
- separate networks for daemon and admin
Gesendet von:   gpfsug-discuss-boun...@spectrumscale.org



Hi Matthias,
 
what's "hostname" returning on your nodes?
 
1.) If it is not the one that the GUI has in it's database you can force a 
refresh by executing the below command on the GUI node:
 
/usr/lpp/mmfs/gui/cli/runtask OS_DETECT --debug
 
2.) If it is not the one that's shown in the returned performance data you 
have to restart the pmsensor service on the nodes:
 
systemctl restart pmsensors
 

Mit freundlichen Grüßen / Kind regards

Andreas Koeninger
Scrum Master and Software Developer / Spectrum Scale GUI and REST API
IBM Systems  Group, Integrated Systems Development / M069
---
IBM Deutschland
Am Weiher 24
65451 Kelsterbach
Phone: +49-7034-643-0867
Mobile: +49-7034-643-0867
E-Mail: andreas.koenin...@de.ibm.com
---
IBM Deutschland Research & Development GmbH / Vorsitzende des 
Aufsichtsrats: Martina Koederitz
Geschäftsführung: Dirk Wittkopp Sitz der Gesellschaft: Böblingen / 
Registergericht: Amtsgericht Stuttgart, HRB 243294
 
 
- Original message -
From: "Wilson, Neil" 
Sent by: gpfsug-discuss-boun...@spectrumscale.org
To: gpfsug main discussion list 
Cc:
Subject: Re: [gpfsug-discuss] Problem with the gpfsgui - separate networks 
for daemon and admin
Date: Fri, Nov 10, 2017 12:20 PM
 
Hi Matthias,
 
Not sure if this will help but we had a very similar issue with the GUI 
not showing performance data, like you we have separate networks for the 
gpfs data traffic and management/admin traffic. 
 
For some reason when we put the full FQDN of the node into the “hostname” 
field (it’s blank by default) of the pmsensors cfg file on that node and 
restarted pmsensors – the gui started showing performance data for that 
node.
 
We ended up removing the auto config for pmsensors from all of our client 
nodes, then manually configured pmsensors with a custom cfg file on each 
node.
 
It’s probably not the same for you, but might be worth trying out.
 
Thanks
Neil
 
From: gpfsug-discuss-boun...@spectrumscale.org [
mailto:gpfsug-discuss-boun...@spectrumscale.org] On Behalf Of 
matthias.kni...@rohde-schwarz.com
Sent: 10 November 2017 06:23
To: gpfsug-discuss@spectrumscale.org
Subject: [gpfsug-discuss] Problem with the gpfsgui - separate networks for 
daemon and admin
 
Hi at all,

when I install the gui without a separate network for the admin commands 
the gui works. But when I split the networks the gui tells me in the 
brower:

Performance collector did not return any data.

All the services like pmsensors, pmcollector, postgresql are running. The 
firewall is disabled.

Any idea for me or some information more needed?

Many thanks in advance!

Matthias 
___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
https://urldefense.proofpoint.com/v2/url?u=http-3A__gpfsug.org_mailman_listinfo_gpfsug-2Ddiscuss=DwICAg=jf_iaSHvJObTbx-siA1ZOg=IbxtjdkPAM2Sbon4Lbbi4w=r2ldt2133nWuT-SD27LvI8nFqC4Kx7f47sYAeLaZH84=yDy0znk3CG9PZuuQ9yi81wOOwc48Aw8WbMvOjzW_uZI=
 
___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss



___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss

[gpfsug-discuss] Antwort: [Newsletter] Re: Problem with the gpfsgui - separate networks for daemon and admin

2017-11-14 Thread Matthias . Knigge 
Changing the hostname without FQDN does not help. When I change back that 
the admin-interface is in the same network as the daemon then it works 
again. Could it be that for the GUI a daemon-interface must set? If yes, 
where can I set this interface?

Thanks, Matthias




Von:"Andreas Koeninger" 
An: gpfsug-discuss@spectrumscale.org
Kopie:  gpfsug-discuss@spectrumscale.org
Datum:  10.11.2017 13:07
Betreff:[Newsletter] Re: [gpfsug-discuss] Problem with the gpfsgui 
- separate networks for daemon and admin
Gesendet von:   gpfsug-discuss-boun...@spectrumscale.org



Hi Matthias,
 
what's "hostname" returning on your nodes?
 
1.) If it is not the one that the GUI has in it's database you can force a 
refresh by executing the below command on the GUI node:
 
/usr/lpp/mmfs/gui/cli/runtask OS_DETECT --debug
 
2.) If it is not the one that's shown in the returned performance data you 
have to restart the pmsensor service on the nodes:
 
systemctl restart pmsensors
 

Mit freundlichen Grüßen / Kind regards

Andreas Koeninger
Scrum Master and Software Developer / Spectrum Scale GUI and REST API
IBM Systems  Group, Integrated Systems Development / M069
---
IBM Deutschland
Am Weiher 24
65451 Kelsterbach
Phone: +49-7034-643-0867
Mobile: +49-7034-643-0867
E-Mail: andreas.koenin...@de.ibm.com
---
IBM Deutschland Research & Development GmbH / Vorsitzende des 
Aufsichtsrats: Martina Koederitz
Geschäftsführung: Dirk Wittkopp Sitz der Gesellschaft: Böblingen / 
Registergericht: Amtsgericht Stuttgart, HRB 243294
 
 
- Original message -
From: "Wilson, Neil" 
Sent by: gpfsug-discuss-boun...@spectrumscale.org
To: gpfsug main discussion list 
Cc:
Subject: Re: [gpfsug-discuss] Problem with the gpfsgui - separate networks 
for daemon and admin
Date: Fri, Nov 10, 2017 12:20 PM
 
Hi Matthias,
 
Not sure if this will help but we had a very similar issue with the GUI 
not showing performance data, like you we have separate networks for the 
gpfs data traffic and management/admin traffic. 
 
For some reason when we put the full FQDN of the node into the “hostname” 
field (it’s blank by default) of the pmsensors cfg file on that node and 
restarted pmsensors – the gui started showing performance data for that 
node.
 
We ended up removing the auto config for pmsensors from all of our client 
nodes, then manually configured pmsensors with a custom cfg file on each 
node.
 
It’s probably not the same for you, but might be worth trying out.
 
Thanks
Neil
 
From: gpfsug-discuss-boun...@spectrumscale.org [
mailto:gpfsug-discuss-boun...@spectrumscale.org] On Behalf Of 
matthias.kni...@rohde-schwarz.com
Sent: 10 November 2017 06:23
To: gpfsug-discuss@spectrumscale.org
Subject: [gpfsug-discuss] Problem with the gpfsgui - separate networks for 
daemon and admin
 
Hi at all,

when I install the gui without a separate network for the admin commands 
the gui works. But when I split the networks the gui tells me in the 
brower:

Performance collector did not return any data.

All the services like pmsensors, pmcollector, postgresql are running. The 
firewall is disabled.

Any idea for me or some information more needed?

Many thanks in advance!

Matthias 
___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
https://urldefense.proofpoint.com/v2/url?u=http-3A__gpfsug.org_mailman_listinfo_gpfsug-2Ddiscuss=DwICAg=jf_iaSHvJObTbx-siA1ZOg=IbxtjdkPAM2Sbon4Lbbi4w=r2ldt2133nWuT-SD27LvI8nFqC4Kx7f47sYAeLaZH84=yDy0znk3CG9PZuuQ9yi81wOOwc48Aw8WbMvOjzW_uZI=
 
___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss



___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss

[gpfsug-discuss] Antwort: [Newsletter] Re: Problem with the gpfsgui - separate networks for daemon and admin

2017-11-10 Thread Matthias . Knigge 
Hi Andreas,
hi Neil,

the GUI-Node returned a hostname with a FQDN. The clients have no FQDN.

Thanks for this tip. I will change the hostname in the first step. If this 
does not help then I will change the configuration files.

I will give you feedback in the next week!

Thanks,
Matthias




Von:"Andreas Koeninger" 
An: gpfsug-discuss@spectrumscale.org
Kopie:  gpfsug-discuss@spectrumscale.org
Datum:  10.11.2017 13:07
Betreff:[Newsletter] Re: [gpfsug-discuss] Problem with the gpfsgui 
- separate networks for daemon and admin
Gesendet von:   gpfsug-discuss-boun...@spectrumscale.org



Hi Matthias,
 
what's "hostname" returning on your nodes?
 
1.) If it is not the one that the GUI has in it's database you can force a 
refresh by executing the below command on the GUI node:
 
/usr/lpp/mmfs/gui/cli/runtask OS_DETECT --debug
 
2.) If it is not the one that's shown in the returned performance data you 
have to restart the pmsensor service on the nodes:
 
systemctl restart pmsensors
 

Mit freundlichen Grüßen / Kind regards

Andreas Koeninger
Scrum Master and Software Developer / Spectrum Scale GUI and REST API
IBM Systems  Group, Integrated Systems Development / M069
---
IBM Deutschland
Am Weiher 24
65451 Kelsterbach
Phone: +49-7034-643-0867
Mobile: +49-7034-643-0867
E-Mail: andreas.koenin...@de.ibm.com
---
IBM Deutschland Research & Development GmbH / Vorsitzende des 
Aufsichtsrats: Martina Koederitz
Geschäftsführung: Dirk Wittkopp Sitz der Gesellschaft: Böblingen / 
Registergericht: Amtsgericht Stuttgart, HRB 243294
 
 
- Original message -
From: "Wilson, Neil" 
Sent by: gpfsug-discuss-boun...@spectrumscale.org
To: gpfsug main discussion list 
Cc:
Subject: Re: [gpfsug-discuss] Problem with the gpfsgui - separate networks 
for daemon and admin
Date: Fri, Nov 10, 2017 12:20 PM
 
Hi Matthias,
 
Not sure if this will help but we had a very similar issue with the GUI 
not showing performance data, like you we have separate networks for the 
gpfs data traffic and management/admin traffic. 
 
For some reason when we put the full FQDN of the node into the “hostname” 
field (it’s blank by default) of the pmsensors cfg file on that node and 
restarted pmsensors – the gui started showing performance data for that 
node.
 
We ended up removing the auto config for pmsensors from all of our client 
nodes, then manually configured pmsensors with a custom cfg file on each 
node.
 
It’s probably not the same for you, but might be worth trying out.
 
Thanks
Neil
 
From: gpfsug-discuss-boun...@spectrumscale.org [
mailto:gpfsug-discuss-boun...@spectrumscale.org] On Behalf Of 
matthias.kni...@rohde-schwarz.com
Sent: 10 November 2017 06:23
To: gpfsug-discuss@spectrumscale.org
Subject: [gpfsug-discuss] Problem with the gpfsgui - separate networks for 
daemon and admin
 
Hi at all,

when I install the gui without a separate network for the admin commands 
the gui works. But when I split the networks the gui tells me in the 
brower:

Performance collector did not return any data.

All the services like pmsensors, pmcollector, postgresql are running. The 
firewall is disabled.

Any idea for me or some information more needed?

Many thanks in advance!

Matthias 
___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
https://urldefense.proofpoint.com/v2/url?u=http-3A__gpfsug.org_mailman_listinfo_gpfsug-2Ddiscuss=DwICAg=jf_iaSHvJObTbx-siA1ZOg=IbxtjdkPAM2Sbon4Lbbi4w=r2ldt2133nWuT-SD27LvI8nFqC4Kx7f47sYAeLaZH84=yDy0znk3CG9PZuuQ9yi81wOOwc48Aw8WbMvOjzW_uZI=
 
___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss



___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss

[gpfsug-discuss] Antwort: [Newsletter] Re: Problem with the gpfsgui - separate networks for daemon and admin

2017-11-10 Thread Matthias . Knigge 
Some more information:

Only the GUI-Node is running on CentOS 7. The Clients are running on 
CentOS 6.x and RHEL 6.x.




Von:"Andreas Koeninger" 
An: gpfsug-discuss@spectrumscale.org
Kopie:  gpfsug-discuss@spectrumscale.org
Datum:  10.11.2017 11:06
Betreff:[Newsletter] Re: [gpfsug-discuss] Problem with the gpfsgui 
- separate networks for daemon and admin
Gesendet von:   gpfsug-discuss-boun...@spectrumscale.org



Hi Matthias,
 
1.) Which GUI version are you running?
2.) Is the Collector running locally on the GUI?
3.) Is there more than one collector configured?
4.) Run the following command on the collector node to verify that there's 
data in the collector:
 
> echo "get metrics cpu_user last 10 bucket_size 60" | /opt/IBM/zimon/zc 
127.0.0.1
 
5.) Run the following command on the GUI node to verify which host name 
the GUI uses to query the performance data:
 
psql postgres postgres -c "select os_host_name from fscc.node;"
 
 
 

Mit freundlichen Grüßen / Kind regards

Andreas Koeninger
Scrum Master and Software Developer / Spectrum Scale GUI and REST API
IBM Systems  Group, Integrated Systems Development / M069
---
IBM Deutschland
Am Weiher 24
65451 Kelsterbach
Phone: +49-7034-643-0867
Mobile: +49-7034-643-0867
E-Mail: andreas.koenin...@de.ibm.com
---
IBM Deutschland Research & Development GmbH / Vorsitzende des 
Aufsichtsrats: Martina Koederitz
Geschäftsführung: Dirk Wittkopp Sitz der Gesellschaft: Böblingen / 
Registergericht: Amtsgericht Stuttgart, HRB 243294
 
 
- Original message -
From: matthias.kni...@rohde-schwarz.com
Sent by: gpfsug-discuss-boun...@spectrumscale.org
To: gpfsug-discuss@spectrumscale.org
Cc:
Subject: [gpfsug-discuss] Problem with the gpfsgui - separate networks for 
daemon and admin
Date: Fri, Nov 10, 2017 7:23 AM
 
Hi at all,

when I install the gui without a separate network for the admin commands 
the gui works. But when I split the networks the gui tells me in the 
brower:

Performance collector did not return any data.

All the services like pmsensors, pmcollector, postgresql are running. The 
firewall is disabled.

Any idea for me or some information more needed?

Many thanks in advance!

Matthias
 
___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
https://urldefense.proofpoint.com/v2/url?u=http-3A__gpfsug.org_mailman_listinfo_gpfsug-2Ddiscuss=DwICAg=jf_iaSHvJObTbx-siA1ZOg=IbxtjdkPAM2Sbon4Lbbi4w=TAzwoRuPR6uYNk_NNemAQPqsxILnSGfc34j4dabTVC0=OR8cwq9jfa_GaqXM00kDYFvhoIqPrKR5LT2Anpas3XA=
 
___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss


___
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss

[gpfsug-discuss] Antwort: [Newsletter] Re: Problem with the gpfsgui - separate networks for daemon and admin

2017-11-10 Thread Matthias . Knigge 
Hi Andreas,

the version of the GUI and the other packages are the following:

gpfs.gui-4.2.3-0.noarch

Yes, the collector is running locally on the GUI-Node and it is only one 
collector configured.

The oupt of your command:

[root@tower-daemon ~]# echo "get metrics cpu_user last 10 bucket_size 60" 
| /opt/IBM/zimon/zc 127.0.0.1
1:  resolve1|CPU|cpu_user
2:  resolve2|CPU|cpu_user
3:  sbc-162150007|CPU|cpu_user
4:  sbc-162150069|CPU|cpu_user
5:  sbc-162150071|CPU|cpu_user
6:  sbtl-176173009|CPU|cpu_user
7:  tower-daemon|CPU|cpu_user
Row Timestamp   cpu_usercpu_usercpu_user   
  cpu_usercpu_usercpu_usercpu_user
1   2017-11-10 11:06:00 2.5253330.1516670.854333   
  0.8268330.8363330.2738330.800167
2   2017-11-10 11:07:00 3.0520000.1568330.964833   
  0.9468330.8818330.3081670.896667
3   2017-11-10 11:08:00 4.2671670.1505001.134833   
  1.2248331.0631670.3003330.855333
4   2017-11-10 11:09:00 4.5053330.1498331.155333   
  1.1276671.0981670.3245000.822000
5   2017-11-10 11:10:00 4.0231670.1456671.136500   
  1.0795001.0160000.2690000.836667
6   2017-11-10 11:11:00 2.1271670.1503330.903167   
  0.8548330.7985000.2808330.854500
7   2017-11-10 11:12:00 4.210.1511670.877833   
  0.8471670.8360000.3125001.110333
8   2017-11-10 11:13:00 14.388333   0.1510001.009667   
  0.9861670.9503330.2771670.814333
9   2017-11-10 11:14:00 18.513167   0.1531671.048000   
  0.9413330.9496670.2828330.808333
10  2017-11-10 11:15:00 1.6135710.1490630.789630   
  0.6507410.8262960.270.676296



[root@tower-daemon ~]# psql postgres postgres -c "select os_host_name from 
fscc.node;"
 os_host_name
--
 tower
 sbtl-176173009-admin
 sbc-162150071-admin
 sbc-162150069-admin
 sbc-162150007-admin
 resolve1-admin
 resolve2-admin
(7rows)

The output seems to be ok.




Von:"Andreas Koeninger" 
An: gpfsug-discuss@spectrumscale.org
Kopie:  gpfsug-discuss@spectrumscale.org
Datum:  10.11.2017 11:06
Betreff:[Newsletter] Re: [gpfsug-discuss] Problem with the gpfsgui 
- separate networks for daemon and admin
Gesendet von:   gpfsug-discuss-boun...@spectrumscale.org



Hi Matthias,
 
1.) Which GUI version are you running?
2.) Is the Collector running locally on the GUI?
3.) Is there more than one collector configured?
4.) Run the following command on the collector node to verify that there's 
data in the collector:
 
> echo "get metrics cpu_user last 10 bucket_size 60" | /opt/IBM/zimon/zc 
127.0.0.1
 
5.) Run the following command on the GUI node to verify which host name 
the GUI uses to query the performance data:
 
psql postgres postgres -c "select os_host_name from fscc.node;"
 
 
 

Mit freundlichen Grüßen / Kind regards

Andreas Koeninger
Scrum Master and Software Developer / Spectrum Scale GUI and REST API
IBM Systems  Group, Integrated Systems Development / M069
---
IBM Deutschland
Am Weiher 24
65451 Kelsterbach
Phone: +49-7034-643-0867
Mobile: +49-7034-643-0867
E-Mail: andreas.koenin...@de.ibm.com
---
IBM Deutschland Research & Development GmbH / Vorsitzende des 
Aufsichtsrats: Martina Koederitz
Geschäftsführung: Dirk Wittkopp Sitz der Gesellschaft: Böblingen / 
Registergericht: Amtsgericht Stuttgart, HRB 243294
 
 
- Original message -
From: matthias.kni...@rohde-schwarz.com
Sent by: gpfsug-discuss-boun...@spectrumscale.org
To: gpfsug-discuss@spectrumscale.org
Cc:
Subject: [gpfsug-discuss] Problem with the gpfsgui - separate networks for 
daemon and admin
Date: Fri, Nov 10, 2017 7:23 AM
 
Hi at all,

when I install the gui without a separate network for the admin commands 
the gui works. But when I split the networks the gui tells me in the 
brower:

Performance collector did not return any data.

All the services like pmsensors, pmcollector, postgresql are running. The 
firewall is disabled.

Any idea for me or some information more needed?

Many thanks in advance!

Matthias
 
___
gpfsug-discuss mailing list
gpfsug-discuss at