Re: [GRASS-user] Topography shading in irradiance

[Maris Nartiss]

Hello Robson,
although I did not completely understood your problem, here are a few
points for a start.
1. Import WRF data in into a new location/mapset with its coordinate
system matching WRF one;
2. Set computational region resolution to 1km (g.region res=1000 -a -p);
3. Run one of r.resamp.* tools (e.g. r.resamp.interp) to obtain smooth
version of WRF in the new resolution set in the step #2.
4. ???
5. Profit!

To fill ???, take a look at r.sun and r.sunmask. You will need a DEM
to calculate the influence of topography.

https://grass.osgeo.org/grass78/manuals/r.resamp.interp.html
https://grass.osgeo.org/grass78/manuals/r.sun.html
https://grass.osgeo.org/grass78/manuals/r.sunmask.html

Don't hesitate to ask follow up questions after taking a look at r.sun
and r.sunmask.
Good luck,
Māris.


2021-08-12 5:04 GMT+03:00, Robson Passos :
> Dear,
>
> I have irradiance data from the WRF meteorological model, the data is with
> 3 km resolution, first I need to refine it to 1 km resolution and then
> calculate the irradiance loss due to the shading of the terrain.
>
> Is there a tool that does this in GRASS? I would like to use an irradiance
> raster as input and know the influence of topography on shading, similar to
> what is presented in the solar potential atlases.
>
> If you can clarify this for me I would appreciate it.
>
> Thank you very much in advance,
> Robson
>
___
grass-user mailing list
grass-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/grass-user

Re: [GRASS-user] [GRASS-dev] GRASS 7.8.5 compile errors

[Maris Nartiss]

This is a know issue. Most likely you have two versions of PROJ
library installed. Make sure to have only one llibproj.so file
present.
Here's a check for it (one line – good, more than one – bad):
ldd /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so | grep proj

Here's a old bug report:
https://github.com/OSGeo/grass/issues/435#issuecomment-688807074

Good luck,
Māris.


2021-08-11 22:06 GMT+03:00, Thomas Adams :
> Hi Anna,
>
> Thank you for your help sorting this out... Not surprisingly, I get the
> same errors in grass-7.8.6RC2
>
> *Error in /home/teaiii/grass-7.8.5/lib/python/ctypes:*
>
> Error: /usr/include/stdio.h:246: Syntax error at '__filename'
> Error: /usr/include/stdio.h:247: Syntax error at '__modes'
> Error: /usr/include/stdio.h:252: Syntax error at '__filename'
> Error: /usr/include/stdio.h:253: Syntax error at '__modes'
> Error: /usr/include/stdio.h:254: Syntax error at '__stream'
> Error: /usr/include/stdio.h:304: Syntax error at '__stream'
> Error: /usr/include/stdio.h:304: Syntax error at '__buf'
> Error: /usr/include/stdio.h:308: Syntax error at '__stream'
> Error: /usr/include/stdio.h:308: Syntax error at '__buf'
> Error: /usr/include/stdio.h:309: Syntax error at 'size_t'
> Error: /usr/include/stdio.h:314: Syntax error at '__stream'
> Error: /usr/include/stdio.h:314: Syntax error at '__buf'
> Error: /usr/include/stdio.h:326: Syntax error at '__stream'
> Error: /usr/include/stdio.h:327: Syntax error at '__format'
> Error: /usr/include/stdio.h:332: Syntax error at '__format'
> Error: /usr/include/stdio.h:334: Syntax error at '__s'
> Error: /usr/include/stdio.h:335: Syntax error at '__format'
> Error: /usr/include/stdio.h:341: Syntax error at '__s'
> Error: /usr/include/stdio.h:341: Syntax error at '__format'
> Error: /usr/include/stdio.h:347: Syntax error at '__format'
> Error: /usr/include/stdio.h:349: Syntax error at '__s'
> Error: /usr/include/stdio.h:349: Syntax error at '__format'
> Error: /usr/include/stdio.h:354: Syntax error at '__s'
> Error: /usr/include/stdio.h:355: Syntax error at 'const'
> Error: /usr/include/stdio.h:355: Syntax error at '__format'
> Error: /usr/include/stdio.h:358: Syntax error at '__s'
> Error: /usr/include/stdio.h:359: Syntax error at 'const'
> Error: /usr/include/stdio.h:359: Syntax error at '__format'
> Error: /usr/include/stdio.h:379: Syntax error at '__fmt'
> Error: /usr/include/stdio.h:382: Syntax error at '__fmt'
> Error: /usr/include/stdio.h:391: Syntax error at '__stream'
> Error: /usr/include/stdio.h:392: Syntax error at '__format'
> Error: /usr/include/stdio.h:397: Syntax error at '__format'
> Error: /usr/include/stdio.h:399: Syntax error at '__s'
> Error: /usr/include/stdio.h:400: Syntax error at '__format'
> Error: /usr/include/stdio.h:416: Syntax error at '__stream'
> Error: /usr/include/stdio.h:417: Syntax error at '__format'
> Error: /usr/include/stdio.h:418: Syntax error at '__format'
> Error: /usr/include/stdio.h:419: Syntax error at '__s'
> Error: /usr/include/stdio.h:420: Syntax error at '__format'
> Error: /usr/include/stdio.h:432: Syntax error at '__s'
> Error: /usr/include/stdio.h:432: Syntax error at '__format'
> Error: /usr/include/stdio.h:440: Syntax error at '__format'
> Error: /usr/include/stdio.h:444: Syntax error at '__s'
> Error: /usr/include/stdio.h:445: Syntax error at '__format'
> Error: /usr/include/stdio.h:465: Syntax error at '__s'
> Error: /usr/include/stdio.h:466: Syntax error at '__format'
> Error: /usr/include/stdio.h:468: Syntax error at '__format'
> Error: /usr/include/stdio.h:470: Syntax error at '__s'
> Error: /usr/include/stdio.h:471: Syntax error at '__format'
> Error: /usr/include/stdio.h:564: Syntax error at '__s'
> Error: /usr/include/stdio.h:564: Syntax error at 'FILE'
> Error: /usr/include/stdio.h:603: Syntax error at '__lineptr'
> Error: /usr/include/stdio.h:604: Syntax error at '__n'
> Error: /usr/include/stdio.h:605: Syntax error at 'FILE'
> Error: /usr/include/stdio.h:606: Syntax error at '__lineptr'
> Error: /usr/include/stdio.h:607: Syntax error at '__n'
> Error: /usr/include/stdio.h:608: Syntax error at 'FILE'
> Error: /usr/include/stdio.h:616: Syntax error at '__lineptr'
> Error: /usr/include/stdio.h:617: Syntax error at '__n'
> Error: /usr/include/stdio.h:618: Syntax error at '__stream'
> Error: /usr/include/stdio.h:626: Syntax error at '__s'
> Error: /usr/include/stdio.h:626: Syntax error at '__stream'
> Error: /usr/include/stdio.h:646: Syntax error at '__ptr'
> Error: /usr/include/stdio.h:647: Syntax error at 'size_t'
> Error: /usr/include/stdio.h:647: Syntax error at '__stream'
> Error: /usr/include/stdio.h:652: Syntax error at '__ptr'
> Error: /usr/include/stdio.h:653: Syntax error at 'size_t'
> Error: /usr/include/stdio.h:653: Syntax error at '__s'
> Error: /usr/include/stdio.h:673: Syntax error at '__ptr'
> Error: /usr/include/stdio.h:674: Syntax error at 'size_t'
> Error: /usr/include/stdio.h:674: Syntax error at '__stream'
> Error: /usr/include/stdio.h:675: Syntax error at '__ptr'
> Error: /

Re: [GRASS-user] [GRASS-dev] GRASS 7.8.5 compile errors

[Thomas Adams]

Hi Māris,

When I run the command ldd /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so |
grep proj , I get:

ldd: /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so: No such file or
directory

There is no libgrass_gproj.so file in /home/teaiii/grass-7.8.5/lib/l in
fact just subdirectories along with Makefile and README

Tom

On Thu, Aug 12, 2021 at 3:08 AM Maris Nartiss  wrote:

> This is a know issue. Most likely you have two versions of PROJ
> library installed. Make sure to have only one llibproj.so file
> present.
> Here's a check for it (one line – good, more than one – bad):
> ldd /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so | grep proj
>
> Here's a old bug report:
> https://github.com/OSGeo/grass/issues/435#issuecomment-688807074
>
> Good luck,
> Māris.
>
>
> 2021-08-11 22:06 GMT+03:00, Thomas Adams :
> > Hi Anna,
> >
> > Thank you for your help sorting this out... Not surprisingly, I get the
> > same errors in grass-7.8.6RC2
> >
> > *Error in /home/teaiii/grass-7.8.5/lib/python/ctypes:*
> >
> > Error: /usr/include/stdio.h:246: Syntax error at '__filename'
> > Error: /usr/include/stdio.h:247: Syntax error at '__modes'
> > Error: /usr/include/stdio.h:252: Syntax error at '__filename'
> > Error: /usr/include/stdio.h:253: Syntax error at '__modes'
> > Error: /usr/include/stdio.h:254: Syntax error at '__stream'
> > Error: /usr/include/stdio.h:304: Syntax error at '__stream'
> > Error: /usr/include/stdio.h:304: Syntax error at '__buf'
> > Error: /usr/include/stdio.h:308: Syntax error at '__stream'
> > Error: /usr/include/stdio.h:308: Syntax error at '__buf'
> > Error: /usr/include/stdio.h:309: Syntax error at 'size_t'
> > Error: /usr/include/stdio.h:314: Syntax error at '__stream'
> > Error: /usr/include/stdio.h:314: Syntax error at '__buf'
> > Error: /usr/include/stdio.h:326: Syntax error at '__stream'
> > Error: /usr/include/stdio.h:327: Syntax error at '__format'
> > Error: /usr/include/stdio.h:332: Syntax error at '__format'
> > Error: /usr/include/stdio.h:334: Syntax error at '__s'
> > Error: /usr/include/stdio.h:335: Syntax error at '__format'
> > Error: /usr/include/stdio.h:341: Syntax error at '__s'
> > Error: /usr/include/stdio.h:341: Syntax error at '__format'
> > Error: /usr/include/stdio.h:347: Syntax error at '__format'
> > Error: /usr/include/stdio.h:349: Syntax error at '__s'
> > Error: /usr/include/stdio.h:349: Syntax error at '__format'
> > Error: /usr/include/stdio.h:354: Syntax error at '__s'
> > Error: /usr/include/stdio.h:355: Syntax error at 'const'
> > Error: /usr/include/stdio.h:355: Syntax error at '__format'
> > Error: /usr/include/stdio.h:358: Syntax error at '__s'
> > Error: /usr/include/stdio.h:359: Syntax error at 'const'
> > Error: /usr/include/stdio.h:359: Syntax error at '__format'
> > Error: /usr/include/stdio.h:379: Syntax error at '__fmt'
> > Error: /usr/include/stdio.h:382: Syntax error at '__fmt'
> > Error: /usr/include/stdio.h:391: Syntax error at '__stream'
> > Error: /usr/include/stdio.h:392: Syntax error at '__format'
> > Error: /usr/include/stdio.h:397: Syntax error at '__format'
> > Error: /usr/include/stdio.h:399: Syntax error at '__s'
> > Error: /usr/include/stdio.h:400: Syntax error at '__format'
> > Error: /usr/include/stdio.h:416: Syntax error at '__stream'
> > Error: /usr/include/stdio.h:417: Syntax error at '__format'
> > Error: /usr/include/stdio.h:418: Syntax error at '__format'
> > Error: /usr/include/stdio.h:419: Syntax error at '__s'
> > Error: /usr/include/stdio.h:420: Syntax error at '__format'
> > Error: /usr/include/stdio.h:432: Syntax error at '__s'
> > Error: /usr/include/stdio.h:432: Syntax error at '__format'
> > Error: /usr/include/stdio.h:440: Syntax error at '__format'
> > Error: /usr/include/stdio.h:444: Syntax error at '__s'
> > Error: /usr/include/stdio.h:445: Syntax error at '__format'
> > Error: /usr/include/stdio.h:465: Syntax error at '__s'
> > Error: /usr/include/stdio.h:466: Syntax error at '__format'
> > Error: /usr/include/stdio.h:468: Syntax error at '__format'
> > Error: /usr/include/stdio.h:470: Syntax error at '__s'
> > Error: /usr/include/stdio.h:471: Syntax error at '__format'
> > Error: /usr/include/stdio.h:564: Syntax error at '__s'
> > Error: /usr/include/stdio.h:564: Syntax error at 'FILE'
> > Error: /usr/include/stdio.h:603: Syntax error at '__lineptr'
> > Error: /usr/include/stdio.h:604: Syntax error at '__n'
> > Error: /usr/include/stdio.h:605: Syntax error at 'FILE'
> > Error: /usr/include/stdio.h:606: Syntax error at '__lineptr'
> > Error: /usr/include/stdio.h:607: Syntax error at '__n'
> > Error: /usr/include/stdio.h:608: Syntax error at 'FILE'
> > Error: /usr/include/stdio.h:616: Syntax error at '__lineptr'
> > Error: /usr/include/stdio.h:617: Syntax error at '__n'
> > Error: /usr/include/stdio.h:618: Syntax error at '__stream'
> > Error: /usr/include/stdio.h:626: Syntax error at '__s'
> > Error: /usr/include/stdio.h:626: Syntax error at '__stream'
> > Error: /usr/include/stdio.h:646: Syntax error at '__ptr'
> > Er

Re: [GRASS-user] Topography shading in irradiance

[Robson Passos]

Dear, thank you very much for the reply.

The r.sun tool considers the terrain shading, that's exactly what I need,
but it only uses DEM and some solar parameters as input. The irradiance is
calculated by an internal model, in this case it is the potential
irradiance. What I need is to use DEM and my own irradiance raster as
input. Would it be possible to use r.sun in this way?

Thank you very much,
Robson.

Em qui., 12 de ago. de 2021 às 04:01, Maris Nartiss 
escreveu:

> Hello Robson,
> although I did not completely understood your problem, here are a few
> points for a start.
> 1. Import WRF data in into a new location/mapset with its coordinate
> system matching WRF one;
> 2. Set computational region resolution to 1km (g.region res=1000 -a -p);
> 3. Run one of r.resamp.* tools (e.g. r.resamp.interp) to obtain smooth
> version of WRF in the new resolution set in the step #2.
> 4. ???
> 5. Profit!
>
> To fill ???, take a look at r.sun and r.sunmask. You will need a DEM
> to calculate the influence of topography.
>
> https://grass.osgeo.org/grass78/manuals/r.resamp.interp.html
> https://grass.osgeo.org/grass78/manuals/r.sun.html
> https://grass.osgeo.org/grass78/manuals/r.sunmask.html
>
> Don't hesitate to ask follow up questions after taking a look at r.sun
> and r.sunmask.
> Good luck,
> Māris.
>
>
> 2021-08-12 5:04 GMT+03:00, Robson Passos  >:
> > Dear,
> >
> > I have irradiance data from the WRF meteorological model, the data is
> with
> > 3 km resolution, first I need to refine it to 1 km resolution and then
> > calculate the irradiance loss due to the shading of the terrain.
> >
> > Is there a tool that does this in GRASS? I would like to use an
> irradiance
> > raster as input and know the influence of topography on shading, similar
> to
> > what is presented in the solar potential atlases.
> >
> > If you can clarify this for me I would appreciate it.
> >
> > Thank you very much in advance,
> > Robson
> >
>
___
grass-user mailing list
grass-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/grass-user

Re: [GRASS-user] [GRASS-dev] GRASS 7.8.5 compile errors

[Maris Nartiss]

Hello Thomas,
I gave you a wrong path. Try this one:
ldd /home/teaiii/grass-7.8.5/dist.x86_64-pc-linux-gnu/lib/libgrass_gproj.so

The problem still boils down to having different incompatible system
libraries during compilation and runtime. You can also search for
libproj.so files in /usr/lib(64) or just dpkg -l | grep proj and if
you see multiple proj versions, remove one.

Māris.

2021-08-12 13:11 GMT+03:00, Thomas Adams :
> Hi Māris,
>
> When I run the command ldd /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so |
> grep proj , I get:
>
> ldd: /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so: No such file or
> directory
>
> There is no libgrass_gproj.so file in /home/teaiii/grass-7.8.5/lib/l in
> fact just subdirectories along with Makefile and README
>
> Tom
>
___
grass-user mailing list
grass-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/grass-user

Re: [GRASS-user] [GRASS-dev] GRASS 7.8.5 compile errors

[Thomas Adams]

Hi Māris,

Thank you. I did earlier find that I did have two proj libraries, so I
removed libproj.so.15. I also ran sudo ldconfig. I also tried removing from
my config anything that I had not explicitly compiled from source against
proj that I compiled, giving:

CFLAGS="-O2 -Wall" LDFLAGS="-s" ./configure \
--enable-64bit \
--with-cxx \
--enable-largefile=yes \
--with-nls \
--with-readline \
--with-pthread \
--with-gdal=/usr/local/bin/gdal-config \
--with-proj --with-proj-share=/usr/local/share/proj \
--with-proj-includes=/usr/local/include \
--with-proj-libs=/usr/local/lib \
--with-geos=/usr/local/bin/geos-config \
--with-wxwidgets=/usr/local/bin/wx-config \
--with-cairo \
--with-opengl-libs=/usr/include/GL \
--with-freetype=yes \
--with-freetype-includes=/usr/include/freetype2/ \
--with-postgres=yes \
--with-postgres-includes=/usr/local/include \
--with-sqlite=yes \
--with-mysql=yes \
--with-mysql-includes=/usr/include/mysql \
--with-odbc=no \
--with-netcdf=/usr/local/bin/nc-config \
--with-zstd \
--with-zstd-includes=/usr/local/include \
--with-zstd-libs=/usr/local/lib

Still I get the errors and when I run ldd, I get...

teaiii@tea-Leopard-WS:~/grass-7.8.5$ ldd
/home/teaiii/grass-7.8.5/dist.x86_64-pc-linux-gnu/lib/libgrass_gproj.so |
grep proj
libproj.so.19 => /usr/local/lib/libproj.so.19 (0x7fb0030a1000)
libproj.so.15 => not found
libproj.so.15 => not found
libproj.so.15 => not found

It's a mystery where libproj.so.15 references are coming from. I have never
had this kind of problem before.

Tom

On Thu, Aug 12, 2021 at 12:39 PM Maris Nartiss  wrote:

> Hello Thomas,
> I gave you a wrong path. Try this one:
> ldd /home/teaiii/grass-7.8.5/dist.x86_64-pc-linux-gnu/lib/libgrass_gproj.so
>
> The problem still boils down to having different incompatible system
> libraries during compilation and runtime. You can also search for
> libproj.so files in /usr/lib(64) or just dpkg -l | grep proj and if
> you see multiple proj versions, remove one.
>
> Māris.
>
> 2021-08-12 13:11 GMT+03:00, Thomas Adams :
> > Hi Māris,
> >
> > When I run the command ldd
> /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so |
> > grep proj , I get:
> >
> > ldd: /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so: No such file or
> > directory
> >
> > There is no libgrass_gproj.so file in /home/teaiii/grass-7.8.5/lib/l in
> > fact just subdirectories along with Makefile and README
> >
> > Tom
> >
>


-- 
Thomas E Adams, III
207 Chowning Place
Blacksburg, VA 24060
tea...@gmail.com (personal)
t...@terrapredictions.org (work)

1 (513) 739-9512 (cell)
___
grass-user mailing list
grass-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/grass-user

Re: [GRASS-user] [GRASS-dev] GRASS 7.8.5 compile errors

[Thomas Adams]

Thank you. Even! I'll check my GDAL...

Tom

On Thu, Aug 12, 2021 at 1:03 PM Even Rouault 
wrote:

> It might be possible that your GDAL build is linking against libgeotiff
> and/or libspatialite built against libproj.so.15
> Le 12/08/2021 à 19:00, Thomas Adams a écrit :
>
> Hi Māris,
>
> Thank you. I did earlier find that I did have two proj libraries, so I
> removed libproj.so.15. I also ran sudo ldconfig. I also tried removing from
> my config anything that I had not explicitly compiled from source against
> proj that I compiled, giving:
>
> CFLAGS="-O2 -Wall" LDFLAGS="-s" ./configure \
> --enable-64bit \
> --with-cxx \
> --enable-largefile=yes \
> --with-nls \
> --with-readline \
> --with-pthread \
> --with-gdal=/usr/local/bin/gdal-config \
> --with-proj --with-proj-share=/usr/local/share/proj \
> --with-proj-includes=/usr/local/include \
> --with-proj-libs=/usr/local/lib \
> --with-geos=/usr/local/bin/geos-config \
> --with-wxwidgets=/usr/local/bin/wx-config \
> --with-cairo \
> --with-opengl-libs=/usr/include/GL \
> --with-freetype=yes \
> --with-freetype-includes=/usr/include/freetype2/ \
> --with-postgres=yes \
> --with-postgres-includes=/usr/local/include \
> --with-sqlite=yes \
> --with-mysql=yes \
> --with-mysql-includes=/usr/include/mysql \
> --with-odbc=no \
> --with-netcdf=/usr/local/bin/nc-config \
> --with-zstd \
> --with-zstd-includes=/usr/local/include \
> --with-zstd-libs=/usr/local/lib
>
> Still I get the errors and when I run ldd, I get...
>
> teaiii@tea-Leopard-WS:~/grass-7.8.5$ ldd
> /home/teaiii/grass-7.8.5/dist.x86_64-pc-linux-gnu/lib/libgrass_gproj.so |
> grep proj
> libproj.so.19 => /usr/local/lib/libproj.so.19 (0x7fb0030a1000)
> libproj.so.15 => not found
> libproj.so.15 => not found
> libproj.so.15 => not found
>
> It's a mystery where libproj.so.15 references are coming from. I have
> never had this kind of problem before.
>
> Tom
>
> On Thu, Aug 12, 2021 at 12:39 PM Maris Nartiss 
> wrote:
>
>> Hello Thomas,
>> I gave you a wrong path. Try this one:
>> ldd
>> /home/teaiii/grass-7.8.5/dist.x86_64-pc-linux-gnu/lib/libgrass_gproj.so
>>
>> The problem still boils down to having different incompatible system
>> libraries during compilation and runtime. You can also search for
>> libproj.so files in /usr/lib(64) or just dpkg -l | grep proj and if
>> you see multiple proj versions, remove one.
>>
>> Māris.
>>
>> 2021-08-12 13:11 GMT+03:00, Thomas Adams :
>> > Hi Māris,
>> >
>> > When I run the command ldd
>> /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so |
>> > grep proj , I get:
>> >
>> > ldd: /home/teaiii/grass-7.8.5/lib/libgrass_gproj.so: No such file or
>> > directory
>> >
>> > There is no libgrass_gproj.so file in /home/teaiii/grass-7.8.5/lib/l in
>> > fact just subdirectories along with Makefile and README
>> >
>> > Tom
>> >
>>
>
>
> --
> Thomas E Adams, III
> 207 Chowning Place
> Blacksburg, VA 24060
> tea...@gmail.com (personal)
> t...@terrapredictions.org (work)
>
> 1 (513) 739-9512 (cell)
>
>
> ___
> grass-dev mailing 
> listgrass-dev@lists.osgeo.orghttps://lists.osgeo.org/mailman/listinfo/grass-dev
>
> -- http://www.spatialys.com
> My software is free, but my time generally not.
>
>

-- 
Thomas E Adams, III
207 Chowning Place
Blacksburg, VA 24060
tea...@gmail.com (personal)
t...@terrapredictions.org (work)

1 (513) 739-9512 (cell)
___
grass-user mailing list
grass-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/grass-user

Re: [GRASS-user] Error in installing r.futures addons in Pop!_OS 20.04

[Anna Petrášová]

You can also download the addons manually from github and then install them
with g.extension, see "Installing when writing a module locally" in
examples section of g.extension manual.

Anna

On Wed, Aug 11, 2021 at 8:16 AM Firman Hadi via grass-user <
grass-user@lists.osgeo.org> wrote:

> Dear Veronica,
>
> Thank you very much for the information.
>
> I use GRASS 7.8.5 provided by QGIS Ubuntu hirsute repository.
> It is Ubuntu 21.04, not 20.04 as I have informed earlier.
> I have upgraded to 7.8.5-1 from QGIS unstable repo, but since it's not
> GRASS 7.8.6.RC2, I can't install any add-ons.
> I will just wait for the stable release.
>
> Thanks.
>
> *Firman Hadi*
> E: firmanh...@me.com
> 
> P: +6281220001994
> W: http://www.sigro.org
> 
> [image: Facebook]
> [image:
> LinkedIn]
> [image:
> Twitter]
> [image:
> Instagram]
> 
> On Aug 11 2021, at 6:50 pm, Veronica Andreo  wrote:
>
> Dear Firman,
>
> What GRASS version are you using? g.extension is currently failing for
> GRASS 7.8.5. See
> https://grass.osgeo.org/news/2021_08_01_g_extension_currently_not_working/
> 
>  for
> an explanation and options.
>
> We released yesterday the second RC for grass 7.8.6 where this problem
> should be fixed: https://github.com/OSGeo/grass/releases/tag/7.8.6RC2
> 
>
> Best regards,
> Vero
>
> [image: Sent from Mailspring]
> El mar, 10 ago 2021 a las 10:20, Firman Hadi via grass-user (<
> grass-user@lists.osgeo.org>) escribió:
>
> Dear all,
>
> I tried to install r.futures addons in Ubuntu-based 20.04 system (Pop!_OS
> 20.04).
> The installation failed with the error message as follows:
> "svn: E17: URL 'https://github.co
> m/OSGeo/grass-addons/trunk/grass7/r.futures'
> doesn't exist"
>
> The modules can be found in this link '
> https://github.com/OSGeo/grass-addons/tree/grass7/src/raster/r.futures'
> 
> So, I used console to install with this command: g.extension
> extension=r.futures url="https://github.co
> m/OSGeo/grass-addons/tree/grass7/src/raster/r.futures"
> Then another error message was shown:
> "ERROR: Extension  not found. Please check 'url' and 'branch'
> options".
>
> Any help regarding the error would be very much appreciated.
>
> Best regards,
>
> *Firman Hadi*
> E: firmanh...@me.com
> 
> P: +6281220001994
> W: http://www.sigro.org
> 
> [image: Facebook]
> [image:
> LinkedIn]
> [image:
> Twitter]
> 

Re: [GRASS-user] Error in installing r.futures addons in Pop!_OS 20.04

[Firman Hadi via grass-user]

Dear Anna,

Well noted with many thanks 🙏.
Best regards,
Firman Hadi

E: firmanh...@me.com 
(https://link.getmailspring.com/link/b16cbb8e-6f0f-46a0-9d66-7f490352e...@getmailspring.com/0?redirect=mailto%3Afirmanhadi%40me.com&recipient=Z3Jhc3MtdXNlckBsaXN0cy5vc2dlby5vcmc%3D)
P: +6281220001994 (tel:+6281220001994)
W: http://www.sigro.org 
(https://link.getmailspring.com/link/b16cbb8e-6f0f-46a0-9d66-7f490352e...@getmailspring.com/1?redirect=http%3A%2F%2Fwww.sigro.org&recipient=Z3Jhc3MtdXNlckBsaXN0cy5vc2dlby5vcmc%3D)

On Aug 13 2021, at 9:42 am, Anna Petrášová  wrote:
> You can also download the addons manually from github and then install them 
> with g.extension, see "Installing when writing a module locally" in examples 
> section of g.extension manual.
>
> Anna
> On Wed, Aug 11, 2021 at 8:16 AM Firman Hadi via grass-user 
> mailto:grass-user@lists.osgeo.org)> wrote:
> > Dear Veronica,
> >
> > Thank you very much for the information.
> > I use GRASS 7.8.5 provided by QGIS Ubuntu hirsute repository.
> > It is Ubuntu 21.04, not 20.04 as I have informed earlier.
> > I have upgraded to 7.8.5-1 from QGIS unstable repo, but since it's not 
> > GRASS 7.8.6.RC2, I can't install any add-ons.
> > I will just wait for the stable release.
> >
> > Thanks.
> > Firman Hadi
> >
> > E: firmanh...@me.com 
> > (https://link.getmailspring.com/link/785c5d3b-71e9-4104-ace8-ac87e6ac5...@getmailspring.com/0?redirect=mailto%3Afirmanhadi%40me.com&recipient=Z3Jhc3MtdXNlckBsaXN0cy5vc2dlby5vcmc%3D)
> > P: +6281220001994 (tel:+6281220001994)
> > W: http://www.sigro.org 
> > (https://link.getmailspring.com/link/785c5d3b-71e9-4104-ace8-ac87e6ac5...@getmailspring.com/1?redirect=http%3A%2F%2Fwww.sigro.org&recipient=Z3Jhc3MtdXNlckBsaXN0cy5vc2dlby5vcmc%3D)
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On Aug 11 2021, at 6:50 pm, Veronica Andreo  > (mailto:veroand...@gmail.com)> wrote:
> > > Dear Firman,
> > >
> > >
> > > What GRASS version are you using? g.extension is currently failing for 
> > > GRASS 7.8.5. See 
> > > https://grass.osgeo.org/news/2021_08_01_g_extension_currently_not_working/
> > >  
> > > (https://link.getmailspring.com/link/785c5d3b-71e9-4104-ace8-ac87e6ac5...@getmailspring.com/6?redirect=https%3A%2F%2Fgrass.osgeo.org%2Fnews%2F2021_08_01_g_extension_currently_not_working%2F&recipient=Z3Jhc3MtdXNlckBsaXN0cy5vc2dlby5vcmc%3D)
> > >  for an explanation and options.
> > >
> > > We released yesterday the second RC for grass 7.8.6 where this problem 
> > > should be fixed: https://github.com/OSGeo/grass/releases/tag/7.8.6RC2 
> > > (https://link.getmailspring.com/link/785c5d3b-71e9-4104-ace8-ac87e6ac5...@getmailspring.com/7?redirect=https%3A%2F%2Fgithub.com%2FOSGeo%2Fgrass%2Freleases%2Ftag%2F7.8.6RC2&recipient=Z3Jhc3MtdXNlckBsaXN0cy5vc2dlby5vcmc%3D)
> > >
> > > Best regards,
> > > Vero
> > >
> > >
> > >
> > > El mar, 10 ago 2021 a las 10:20, Firman Hadi via grass-user 
> > > (mailto:grass-user@lists.osgeo.org)>) 
> > > escribió:
> > > > Dear all,
> > > >
> > > > I tried to install r.futures addons in Ubuntu-based 20.04 system 
> > > > (Pop!_OS 20.04).
> > > > The installation failed with the error message as follows:
> > > > "svn: E17: URL 'https://github.co 
> > > > (http://github.co)m/OSGeo/grass-addons/trunk/grass7/r.futures'
> > > > doesn't exist"
> > > >
> > > > The modules can be found in this link 
> > > > 'https://github.com/OSGeo/grass-addons/tree/grass7/src/raster/r.futures'
> > > >  
> > > > (https://link.getmailspring.com/link/a338c8a3-4b0f-44f2-820a-e3e57a97a...@getmailspring.com/0?redirect=https%3A%2F%2Fgithub.com%2FOSGeo%2Fgrass-addons%2Ftree%2Fgrass7%2F&recipient=Z3Jhc3MtdXNlckBsaXN0cy5vc2dlby5vcmc%3D)
> > > > So, I used console to install with this command: g.extension 
> > > > extension=r.futures url="https://github.co 
> > > > (http://github.co)m/OSGeo/grass-addons/tree/grass7/src/raster/r.futures"
> > > > Then another error message was shown:
> > > > "ERROR: Extension  not found. Please check 'url' and 
> > > > 'branch' options".
> > > >
> > > > Any help regarding the error would be very much appreciated.
> > > > Best regards,
> > > > Firman Hadi
> > > >
> > > > E: firmanh...@me.com 
> > > > (https://link.getmailspring.com/link/a338c8a3-4b0f-44f2-820a-e3e57a97a...@getmailspring.com/1?redirect=mailto%3Afirmanhadi%40me.com&recipient=Z3Jhc3MtdXNlckBsaXN0cy5vc2dlby5vcmc%3D)
> > > > P: +6281220001994 (tel:+6281220001994)
> > > > W: http://www.sigro.org 
> > > > (https://link.getmailspring.com/link/a338c8a3-4b0f-44f2-820a-e3e57a97a...@getmailspring.com/2?redirect=http%3A%2F%2Fwww.sigro.org&recipient=Z3Jhc3MtdXNlckBsaXN0cy5vc2dlby5vcmc%3D)
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ___
> > > > grass-user mailing list
> > > > grass-user@lists.osgeo.org (mailto:grass-user@lists.osgeo.org)
> > > > https://lists.osgeo.org/mailman/listinfo/grass-user
> > >
> > >
> >
> > ___
> > gra

Re: [GRASS-user] [GRASS-dev] GRASS 7.8.5 compile errors

[Maris Nartiss]

Don't forget to run make distclean before reconfiguring and
recompiling GRASS. If you would be on a Gentoo, I would suggest to run
revdep-rebuild that would rebuild all packages linking to proj. On
Ubuntu you just have to look for a PPA with GIS packages compiled with
the right proj version.

Māris.

2021-08-12 20:00 GMT+03:00, Thomas Adams :
>
> It's a mystery where libproj.so.15 references are coming from. I have never
> had this kind of problem before.
>
> Tom
>
___
grass-user mailing list
grass-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/grass-user