Re: [Grml] Problems with CCISS/HP Smart Array E200
* [EMAIL PROTECTED] <[EMAIL PROTECTED]> [20080310 16:05]: > I have a small Problem with the cciss SCSI Support on GRML. > I have read all the Docs i could find but without success. > My Plan is to use GRML-Mini as a Rescue System on a seperate > Partition. What do you mean with grml-mini? grml-small or grml-medium? :) Which version exactly are you talking about? > If i start from the CD everything is fine. The Partitions under > /dev/cciss/c0d0pX are found. But i cant figure out what module > provides the cciss Support. > If i start GRML from HDD the Kernel is booting but can't find the Iso. > I tried the Kernelparameter scsi=probe. But no Module is found. scsi=probe is deprecated at least for grml-medium. Which bootoptions are you using for "booting from HDD"? Can you please provide the steps you did so far? > Do you have any Idea which Module brings the CCISS Support on the CD? CCISS is behind behing kernel config CONFIG_BLK_CPQ_CISS_DA, what's compiled statically into the grml kernel - so that shouldn't be the issue. Does "dmraid -r" output anything when grml is booted in live-mode? If so your device requires dmraid support (which *should* be supported by grml and grml-medium but *not* by the initrd of grml-small). regards, -mika- -- http://grml.org/# Linux for texttool-users and sysadmins http://wiki.grml.org/ # share your knowledge http://grml.supersized.org/ # the grml development weblog #grml @ irc.freenode.org# meet us on irc signature.asc Description: Digital signature ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
Re: [Grml] sound on eeePC swspeak
Hello Nico, alsconf works, it makes all the test, and nothing means, that i have no sound. I will look, of the snd_hda driver is loaded and then post agien. Regards Dietmar Is there a german mailinglist for grml? ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
Re: [Grml] sound on eepc swspeak
Hi Dietmar, * Dietmar Segbert <[EMAIL PROTECTED]> [2008-03-10 19:07]: > amixer or alsamixer shows an error error defaul load: invalid argument > > If i look in /proc/asound/ossmixer, the settings for volume ... are set to 0. Strange. > if i do alsaconf, nothing will happen. Can you be a bit more precise about what you mean with nothing? Do you have the snd-hda-intel (or snd_hda_intel) module loaded? Kind regards Nico -- Nico Golde - http://www.ngolde.de - [EMAIL PROTECTED] - GPG: 0x73647CFF For security reasons, all text in this mail is double-rot13 encrypted. pgp4MbjXDVBhf.pgp Description: PGP signature ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
Re: [Grml] sound on eepc swspeak
Hello, thanks for your answers. amixer or alsamixer shows an error error defaul load: invalid argument If i look in /proc/asound/ossmixer, the settings for volume ... are set to 0. if i do alsaconf, nothing will happen. Regards Dietmar ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
Re: [Grml] [grml] grml 1.1 shutdown will fail
* Michael Schierl <[EMAIL PROTECTED]> [20080310 18:40]: > Michael Wittke schrieb: > > When I shutdown the PC (with shutdown -h now) the PC will hang when > > the cd is ejected and I have to disconnect the power to be able to > > restart the PC. I have no idea what went wrong. > It cannot find the "halt" binary because you already removed the CD. > http://bts.grml.org/grml/issue384 > Workarounds: Use noeject bootoption (so that the CD is not ejected > before reboot), or ensure that you have called the reboot or halt binary > (depending on what you want to do) immediately before shutdown, for > example by using "halt" or "poweroff" instead of > "shutdown -h now". or by calling it "halt --help", so that it is still > in disk cache. > The same applies for "reboot" vs. "shutdown -r now". Ah, great for pointing me into the right direction, Michael. :) http://hg.grml.org/grml-etc/rev/1f231de1a8c7 hopyfully addresses the issue. regards, -mika- -- http://grml.org/# Linux for texttool-users and sysadmins http://wiki.grml.org/ # share your knowledge http://grml.supersized.org/ # the grml development weblog #grml @ irc.freenode.org# meet us on irc signature.asc Description: Digital signature ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
Re: [Grml] [grml] grml 1.1 shutdown will fail
Michael Wittke schrieb: > When I shutdown the PC (with shutdown -h now) the PC will hang when > the cd is ejected and I have to disconnect the power to be able to > restart the PC. I have no idea what went wrong. It cannot find the "halt" binary because you already removed the CD. http://bts.grml.org/grml/issue384 Workarounds: Use noeject bootoption (so that the CD is not ejected before reboot), or ensure that you have called the reboot or halt binary (depending on what you want to do) immediately before shutdown, for example by using "halt" or "poweroff" instead of "shutdown -h now". or by calling it "halt --help", so that it is still in disk cache. The same applies for "reboot" vs. "shutdown -r now". Hope that helps, (yet another) Michael ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
Re: [Grml] [grml] grml 1.1 shutdown will fail
* Michael Wittke <[EMAIL PROTECTED]> [20080310 17:46]: > I have just downloaded the grml 1.1 iso und burned a live cd for playing > a little bit with your nice tool. The cd starts and everything works fine. > There also is no fault, when I start the cd with the grml testcd boot option. > My PC has an ASUS Mainbord with an Intel Pentium III Processor. > When I shutdown the PC (with shutdown -h now) the PC will hang when > the cd is ejected and I have to disconnect the power to be able to > restart the PC. I have no idea what went wrong. > On the monitor are the following error massages: > end-request: I/O error,dev hdc, sector 114876 > hdc: tray open > (there are a lot of this massages with different sector numbers) > SQUASHFS error: Unable to read fragment cache block [2918b2b] > SQUASHFS errror: Unable to read page block 2918b2b, seize 5811 > /etc/init.d/halt: line 65: /sbin/halt: cannot execute binery file > INIT: no more process left in this runlevel. > Any suggestions how to solve the problem? Looks like some sectors on the CD are defect. Please check the CD with 'readcd -c2scan ...' - see http://wiki.grml.org/doku.php?id=problems The sysrq magic might work around your issue anyway, try pressing "Alt + SysRq (Print Screen) + S U B". http://en.wikipedia.org/wiki/REISUB regards, -mika- -- http://grml.org/# Linux for texttool-users and sysadmins http://wiki.grml.org/ # share your knowledge http://grml.supersized.org/ # the grml development weblog #grml @ irc.freenode.org# meet us on irc signature.asc Description: Digital signature ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
[Grml] [grml] grml 1.1 shutdown will fail
Hello, batch your pardon for asking for your help. I have just downloaded the grml 1.1 iso und burned a live cd for playing a little bit with your nice tool. The cd starts and everything works fine. There also is no fault, when I start the cd with the grml testcd boot option. My PC has an ASUS Mainbord with an Intel Pentium III Processor. When I shutdown the PC (with shutdown -h now) the PC will hang when the cd is ejected and I have to disconnect the power to be able to restart the PC. I have no idea what went wrong. On the monitor are the following error massages: end-request: I/O error,dev hdc, sector 114876 hdc: tray open (there are a lot of this massages with different sector numbers) SQUASHFS error: Unable to read fragment cache block [2918b2b] SQUASHFS errror: Unable to read page block 2918b2b, seize 5811 /etc/init.d/halt: line 65: /sbin/halt: cannot execute binery file INIT: no more process left in this runlevel. Any suggestions how to solve the problem? ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
Re: [Grml] swspeak, sound shutdown on eeePC
Hi Dietmar, * Dietmar Segbert <[EMAIL PROTECTED]> [2008-03-08 10:10]: > after spending a lot of time i was able to boot grml 1.1 rC6 from a usb- > stick. The swspeak starts also as brltty, but i do not hear anything. > > I also did not hear anything playing a mp3-file with mplayer. > > How can i set up the volume or unmute the soundcard, so that i can hear > anything. Can you post the output of amixer? > If i shutdown the eepc with the command shutdown -h now, the PC did not > shutdown properly. To turn the eeePC off, i must press the button for > POWER. This is a bug in the snd-hda-intel sound driver, unfortunately you need to unload it before shutting down, this is a known bug and will hopefully get fixed soon by upstream. Kind regards Nico -- Nico Golde - http://www.ngolde.de - [EMAIL PROTECTED] - GPG: 0x73647CFF For security reasons, all text in this mail is double-rot13 encrypted. pgpmFLQx5HQuG.pgp Description: PGP signature ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
[Grml] Problems with CCISS/HP Smart Array E200
Hello All! I have a small Problem with the cciss SCSI Support on GRML. I have read all the Docs i could find but without success. My Plan is to use GRML-Mini as a Rescue System on a seperate Partition. If i start from the CD everything is fine. The Partitions under /dev/cciss/c0d0pX are found. But i cant figure out what module provides the cciss Support. If i start GRML from HDD the Kernel is booting but can't find the Iso. I tried the Kernelparameter scsi=probe. But no Module is found. Do you have any Idea which Module brings the CCISS Support on the CD? TIA for any Help! Best Regards Thomas Richter -- Pt! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
Re: [Grml] sata question
* martin yazdzik <[EMAIL PROTECTED]> [20080309 23:00]: > Just a noob question, for no reason other than neugier. > Why does debian installer, lenny, recognise both the sata and atapi cd > thing, giving the correct response to cat /proc/scsi/scsi, whereas grml > requires bootparameters ide1=noprobe and ide0=noprobe to get sata hdd > and atapi(sata) sdr0 recognised? Can you please provide us output of "hwinfo --disk" (the optimum would be output of grml as well as Debian). I think you have another libata<->PATA regression, we are working on that - experimental builds are available at http://grml.org/2.6.25/ regards, -mika- -- http://grml.org/# Linux for texttool-users and sysadmins http://wiki.grml.org/ # share your knowledge http://grml.supersized.org/ # the grml development weblog #grml @ irc.freenode.org# meet us on irc signature.asc Description: Digital signature ___ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
