[Hackrf-dev] How does the hackrf generate the signals?
I've been wanting to understand how an ofdm signal is generated for a while and I can't The hackrf generates similar signals but I also do not understand how it generates them. It seems impossible to generate 8000 carriers at the same time, therefore the only thing left is to generate them sequentially(to sample), generating a point and passing to the next frequency , thus until 8K and then go back to the beginning and go the same way.The trick would be to do it so fast that it is not noticeable to say it in any way Thank you ___ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
Re: [Hackrf-dev] Update and instructions
Release version 2017.02.01 can be found here: https://github.com/mossmann/hackrf/releases Instructions for updating firmware can be found here: https://github.com/mossmann/hackrf/wiki/Updating-Firmware On 4/5/20 2:26 PM, isidoro manzo wrote: Hello, I purchased a hackrf one with firmware 2015.07.02. How can I update it to version 2017.02.01 without damaging it. I can have clear instructions for operating in gsm mode. There is confused information on the network. Best regards, Giorgio. ___ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev ___ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
