RE: [H] Nero - Dual burner question

[Wayne Johnson]

At 04:37 PM 10/17/2005, rls typed:

I have done it plenty with 2 Plextors (IDE). Open up two Nero Burning
Windows. Select the one burner in the one window, and the other burner in
the second widows and go from there.


I've done it few times with 2 Pioneer drives as well with one being 
an internal IDE drive & the other being an external FW drive.



--+--
   Wayne D. Johnson
Ashland, OH, USA 44805
 

RE: [H] Nero - Dual burner question

[rls]

I have done it plenty with 2 Plextors (IDE). Open up two Nero Burning
Windows. Select the one burner in the one window, and the other burner in
the second widows and go from there.

I have them both on the same channel the 716a as the main and the 712a is on
as the secondary. I HAVE YET TO BURN 1 coaster doing this. I have burned
atleast 50 DVD's with data this way. At one point I had a 3rd DVD on a
different channel and actually did 3 at once, but I pulled that DVD out and
put it in another computer - it was an NEC.

I have 2 Xeon's 2.8 with 2gb of mem so they don't starve for resources
either

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bobby Heid
Sent: Monday, October 17, 2005 3:35 PM
To: 'The Hardware List'
Subject: [H] Nero - Dual burner question

Hey,

I have two burners in my system.  I know (well, I think I know) that Nero
can burn the same files to multiple burners at the same time.  But is it
possible to burn different files to different burners at the same time?  If
so, how?

Thanks,
Bobby

Re: [H] Nero - Dual burner question

[FORC5]

never tried tried it but maybe open nero and do 2 windows.
fp

At 12:34 PM 10/17/2005, Bobby Heid Poked the stick with:
>Hey,
>
>I have two burners in my system.  I know (well, I think I know) that Nero
>can burn the same files to multiple burners at the same time.  But is it
>possible to burn different files to different burners at the same time?  If
>so, how?
>
>Thanks,
>Bobby

-- 
Tallyho ! ]:8)
Taglines below !
--
Colic: a sheepdog that is part collie.

Re: [H] Nero - Dual burner question

[Brian Weeden]

On 10/17/05, Bobby Heid <[EMAIL PROTECTED]> wrote:
> Hey,
>
> I have two burners in my system.  I know (well, I think I know) that Nero
> can burn the same files to multiple burners at the same time.  But is it
> possible to burn different files to different burners at the same time?  If
> so, how?
>

I would say with IDE, not unless you have them on different channels. 
Otherwise it is my understanding that only one device at a time on an
IDE channel can use that channel.  For example you have a DVD drive as
IDE 0 and a HD as IDE 1 on the same ribbon (master and slave).  You
cannot transfer data to both from another device at the exact same
time.  Now, whether those millisecond gaps that this causes will screw
up your burns, dunno.

I think with SCSI and SATA this becomes a non-issue from a bus access
standpoint.

--
Brian

[H] Nero - Dual burner question

[Bobby Heid]

Hey,

I have two burners in my system.  I know (well, I think I know) that Nero
can burn the same files to multiple burners at the same time.  But is it
possible to burn different files to different burners at the same time?  If
so, how?

Thanks,
Bobby