AW: [Histonet] Fwd: SOP on embedding tissues of different sizes in same mold
We avoid to put specimens of different size into one cassette in general (especially with biopsies). If I have too pieces of different size with a clear cut side, I put them both on the ground of the mold. I think one could never precisly put a specimen in a certain level into the mold, if it doesn't lie on the bottom. Gudrun -Ursprüngliche Nachricht- Von: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] Im Auftrag von Sanjeet Gesendet: Donnerstag, 31. Juli 2014 03:44 An: histonet@lists.utsouthwestern.edu Betreff: [Histonet] Fwd: SOP on embedding tissues of different sizes in same mold Sent from my iPhone Begin forwarded message: From: Sanjeet asanj...@yahoo.com Date: July 30, 2014 at 9:15:25 PM EDT To: histonet-requ...@lists.utsouthwestern.edu histonet-requ...@lists.utsouthwestern.edu Subject: SOP on embedding tissues of different sizes in same mold Hi Does anyone in the Histo world have an SOP on how to embed tissues of different sizes in the same mold. Do you embed in different levels depending upon the size, the larger embedded first and the smallest at the end. Or do you embed all in the same plane regardless of the tissue size. Are you able to justify and salvage all tissue on the slide. Thank you all in advance Sanjeet Sent from my iPhone ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
AW: [Histonet] Fwd: Embedding skin
As a first information, we use sliding microtomes with the knife set in an angel (called declination). We embed straight, because areas of same concistancy should be positioned in one line and in the cutting direction. Areas of more rigidity compress the smoother ones, if they are shifted in an angle. If you have problems with the orientation of the tissue in the block, just turn the blockholder. Gudrun -Ursprüngliche Nachricht- Von: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] Im Auftrag von Sanjeet Gesendet: Donnerstag, 31. Juli 2014 03:46 An: histonet@lists.utsouthwestern.edu Betreff: [Histonet] Fwd: Embedding skin Sent from my iPhone Begin forwarded message: From: Sanjeet asanj...@yahoo.com Date: July 30, 2014 at 9:27:46 PM EDT To: histonet-requ...@lists.utsouthwestern.edu histonet-requ...@lists.utsouthwestern.edu Subject: Embedding skin Hi Histo techs Need some info on the correct orientation of skin tissue. Punch/ ellipse. Does anyone have a literature on this topic. I am used to embed large skin in an angle, the skin being on top. Currently the place where I work have different protocol, the skin is embedded straight, the epidermis being right angled to the mold. I find the section difficult to cut when the skin is embedded straight , the section are compressed and more chances scoring along the section. Thanks Sanjeet Sent from my iPhone ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Re: [Histonet] Schiff : room temp or not
All chemical reactions (= all histochemistry procedures) are governed by the Van't Hoff law that states that every 10ºC the speed of the reaction doubles (if it is +10ºC) or is reduced in half (if it is -10ºC) so, if you use the Schiff reagent (that has to be stored at 6-8 ºC) directly, the reaction will take longer than if the reagent is let to warm up to room temperature. You can use it as you wish but if used cool the reaction will take longer and you will have to give it more time because otherwise the staining will be weaker. René J. On Wednesday, July 30, 2014 4:14 PM, Amber McKenzie amber.mcken...@gastrodocs.net wrote: When staining PAS's, does the Schiff need to be room temp or does it matter? Just curious about when to add it to our Sakura stainer. Should we put the schiff's on at the beginning of our shift so it's room temp when we need it or when should add it when we add PAS slides to it that need to be stained? Thanks! ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Re: [Histonet] Schiff : room temp or not
This is another example of the ignorance level of some Joint Commission experts that really do not know what they are talking about. The Schiff reagent (the hay yellow solution of Basic Fucsin) is temperature sensitive and HAS to be stored refrigerated or it will lose its reactivity in just a few days. René J. On Wednesday, July 30, 2014 8:34 PM, Michael Backhus mikeykk...@live.com wrote: Joint Commission told us we could not keep it in the refrigerator because the bottle said to store it at room temperature. We called the manufacturer and they faxed us a paper stating we could keep it in the fridge. However It wasn't easy to get the paper because the manufacturer prefers the shelf live to be shorter so we buy more. Mike Sent from my iPhone On Jul 30, 2014, at 8:14 PM, Hans B Snyder h...@histologistics.com wrote: Hello Amber, That depends on your protocol. Which protocol are you using and what does your protocol say to use the schiffs at? Consider that schiffs is usually stored at 4C in brown or opaque bottles. This suggests it is light sensitive. Our protocol say to use the schiffs at 37C for 15 minutes but I have used it at 22C for 30 minutes and at 60C for 10 minutes with consistent results. We have found that using it at 60C reduces it's shelf life considerably and do not suggest it unless you are familiar with doing so. Good luck Hans B Snyder Histologistics 60 Prescott Street Worcester, MA 01605 508-308-7800 h...@histologistics.com On Wed, Jul 30, 2014 at 4:13 PM, Amber McKenzie amber.mcken...@gastrodocs.net wrote: When staining PAS's, does the Schiff need to be room temp or does it matter? Just curious about when to add it to our Sakura stainer. Should we put the schiff's on at the beginning of our shift so it's room temp when we need it or when should add it when we add PAS slides to it that need to be stained? Thanks! ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Re: [Histonet] Schiff : room temp or not
Not ALL Schiff's NEED to be stored in the refrigerator. I use a Schiff's from Newcomer and it says to store at 15-30C (59-86F). It comes with a long shelf life and stains beautifully and can be reused a couple of times all at room temp. So why would I want to put this in the refrigerator? Andrea Grantham, HT (ASCP) Senior Research Specialist University of Arizona Cellular and Molecular Medicine Histology Service Laboratory P.O.Box 245044 Tucson, AZ 85724 algra...@email.arizona.edumailto:algra...@email.arizona.edu Tel: 520.626.4415 Fax: 520.626.2097 ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
[Histonet] Cassette Printer
Has anyone out there used the Primera automated cassette printer? Pros? Cons? We are close to the General Data model, however, this Primera looks kinda cool. Thank you for input, Michael Ann Jones, HT (ASCP) Histology Manager Metropath 7444 W. Alaska Dr. #250 Lakewood, CO 80226 303.634.2511 mjo...@metropath.com ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
رد: Re: [Histonet] Schiff : room temp or not
I am totally agree with you Rene I also experienced the same problem with CAP regarding Schiff's reagent storing. Regards Jamal Rowaihi Laboratory supervisor Al Borg Medical Laboratories *Sent from my cell phoner* الرسالة الأصلية من: Rene J Buesa rjbu...@yahoo.com التاريخ: ٢٠١٤/٠٧/٣١ ٥:٤١ م (GMT+03:00) إلى: Michael Backhus mikeykk...@live.com,Hans B Snyder h...@histologistics.com,histonet@lists.utsouthwestern.edu الموضوع: Re: [Histonet] Schiff : room temp or not This is another example of the ignorance level of some Joint Commission experts that really do not know what they are talking about. The Schiff reagent (the hay yellow solution of Basic Fucsin) is temperature sensitive and HAS to be stored refrigerated or it will lose its reactivity in just a few days. René J. On Wednesday, July 30, 2014 8:34 PM, Michael Backhus mikeykk...@live.com wrote: Joint Commission told us we could not keep it in the refrigerator because the bottle said to store it at room temperature. We called the manufacturer and they faxed us a paper stating we could keep it in the fridge. However It wasn't easy to get the paper because the manufacturer prefers the shelf live to be shorter so we buy more. Mike Sent from my iPhone On Jul 30, 2014, at 8:14 PM, Hans B Snyder h...@histologistics.com wrote: Hello Amber, That depends on your protocol. Which protocol are you using and what does your protocol say to use the schiffs at? Consider that schiffs is usually stored at 4C in brown or opaque bottles. This suggests it is light sensitive. Our protocol say to use the schiffs at 37C for 15 minutes but I have used it at 22C for 30 minutes and at 60C for 10 minutes with consistent results. We have found that using it at 60C reduces it's shelf life considerably and do not suggest it unless you are familiar with doing so. Good luck Hans B Snyder Histologistics 60 Prescott Street Worcester, MA 01605 508-308-7800 h...@histologistics.com On Wed, Jul 30, 2014 at 4:13 PM, Amber McKenzie amber.mcken...@gastrodocs.net wrote: When staining PAS's, does the Schiff need to be room temp or does it matter? Just curious about when to add it to our Sakura stainer. Should we put the schiff's on at the beginning of our shift so it's room temp when we need it or when should add it when we add PAS slides to it that need to be stained? Thanks! ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
[Histonet] RE: Cassette Printer
Yes, we have one. Our first one was a lemon, but was replaced at no cost. Ever since then we had no problems whatsoever with it. We like it, because it has a small foot print and the printing is very clear, even with bar codes. The cons might be, that you have to unload the slides after a while (maybe after 15 - 20 slides). But this is not even a negative for us. Bea Beatrice DeBrosse-Serra HT(ASCP)QIHC Isis Pharmaceuticals Antisense Drug Discovery 2855 Gazelle Ct. Carlsbad, CA 92010 760-603-2371 -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Michael Ann Jones Sent: Thursday, July 31, 2014 10:07 AM To: Histonet@lists.utsouthwestern.edu Subject: [Histonet] Cassette Printer Has anyone out there used the Primera automated cassette printer? Pros? Cons? We are close to the General Data model, however, this Primera looks kinda cool. Thank you for input, Michael Ann Jones, HT (ASCP) Histology Manager Metropath 7444 W. Alaska Dr. #250 Lakewood, CO 80226 303.634.2511 mjo...@metropath.com ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
RE: Re: [Histonet] Schiff : room temp or not
We purchase ours from Newcomer and it is stable at room temp. I check it periodically and have never had it go weak before the expiration date. That is one of the reasons I began using it was it was always ready to use. Newcomer does note that it is sensitive to humidity and to keep tightly closed. We wrap lab tape around the lid to aid with that. Jeanine H. Sanders -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of j.rowaihi Sent: Thursday, July 31, 2014 1:19 PM To: Rene J Buesa; Michael Backhus; Hans B Snyder; histonet@lists.utsouthwestern.edu Subject: رد: Re: [Histonet] Schiff : room temp or not I am totally agree with you Rene I also experienced the same problem with CAP regarding Schiff's reagent storing. Regards Jamal Rowaihi Laboratory supervisor Al Borg Medical Laboratories *Sent from my cell phoner* الرسالة الأصلية من: Rene J Buesa rjbu...@yahoo.com التاريخ: ٢٠١٤/٠٧/٣١ ٥:٤١ م (GMT+03:00) إلى: Michael Backhus mikeykk...@live.com,Hans B Snyder h...@histologistics.com,histonet@lists.utsouthwestern.edu الموضوع: Re: [Histonet] Schiff : room temp or not This is another example of the ignorance level of some Joint Commission experts that really do not know what they are talking about. The Schiff reagent (the hay yellow solution of Basic Fucsin) is temperature sensitive and HAS to be stored refrigerated or it will lose its reactivity in just a few days. René J. On Wednesday, July 30, 2014 8:34 PM, Michael Backhus mikeykk...@live.com wrote: Joint Commission told us we could not keep it in the refrigerator because the bottle said to store it at room temperature. We called the manufacturer and they faxed us a paper stating we could keep it in the fridge. However It wasn't easy to get the paper because the manufacturer prefers the shelf live to be shorter so we buy more. Mike Sent from my iPhone On Jul 30, 2014, at 8:14 PM, Hans B Snyder h...@histologistics.com wrote: Hello Amber, That depends on your protocol. Which protocol are you using and what does your protocol say to use the schiffs at? Consider that schiffs is usually stored at 4C in brown or opaque bottles. This suggests it is light sensitive. Our protocol say to use the schiffs at 37C for 15 minutes but I have used it at 22C for 30 minutes and at 60C for 10 minutes with consistent results. We have found that using it at 60C reduces it's shelf life considerably and do not suggest it unless you are familiar with doing so. Good luck Hans B Snyder Histologistics 60 Prescott Street Worcester, MA 01605 508-308-7800 h...@histologistics.com On Wed, Jul 30, 2014 at 4:13 PM, Amber McKenzie amber.mcken...@gastrodocs.net wrote: When staining PAS's, does the Schiff need to be room temp or does it matter? Just curious about when to add it to our Sakura stainer. Should we put the schiff's on at the beginning of our shift so it's room temp when we need it or when should add it when we add PAS slides to it that need to be stained? Thanks! ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
[Histonet] Helicobacter control tissue request
Hi, could anyone send us some Helicobacter pylori control tissue? The commercial slides are disappointing for us...they cost a lot and not every slide has the bacteria. We are a small lab and just started doing GI..I just need a small piece of tissue until we have a positive specimen to use for control. Thank you, Hanna Preiszner East Tennessee State University/Quillen College of Medicine ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Re: [Histonet] RE: Noise reduction
I don't know if it's your PA not being able to concentrate, or your transcriptionists complaining about noise on the recording, but have you considered solving the problem on the other end? Noise canceling headphones and/or a throat microphone for your PA. A real throat mic, (not a video game accessory) works by picking up vibrations of the throat with transducers, so you don't get background noise. Voila! No noise in your PA's ears, or on transcriptionist's recordings. And your histotechs can still party! Sincerely, Jay A. Lundgren, M.S., HTL, (ASCP) On Wed, Jul 30, 2014 at 5:25 PM, Tony Reilly tony.rei...@health.qld.gov.au wrote: Hi LeAnn At a previous laboratory we had a half wall with glass from bench height to the ceiling and a glass door. The door could be open or closed and the glass while blocking out noise did not make the area feel confined from the rest of the lab. The other advantages were that the air conditioning to that room was independent and not recycled to the rest of the lab reducing formalin fumes and if there was a formalin spill in that area it was easily contained. Regards Tony Tony Reilly B.App.Sc, M.Sc Chief Scientist Anatomical Pathology Princess Alexandra Laboratory | Pathology Queensland | Health Support Queensland Department of Health | Queensland Government Building 15, Level 1, 199 Ipswich Road Woolloongabba Qld 4102 Ph: 07 3176 2412 Mob: 0402139411 Fax: 07 3176 2930 Email: tony.reil...@health.qld.gov.au | www.health.qld.gov.au -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto: histonet-boun...@lists.utsouthwestern.edu] On Behalf Of LeAnn Lang Sent: Thursday, 31 July 2014 4:55 AM To: histonet@lists.utsouthwestern.edu Subject: [Histonet] Noise reduction We are trying to figure out an inexpensive way to try to block off our grossing area to help with noise reduction when our Pathologist Assistant does her dictation. Has anyone done anything in their labs that they would be willing to share with me? We don't want something permanent like building a wall, but rather something that can be opened up for parts of the day. We have thought about having a curtain (like a privacy curtain found in doctors' offices), but we are not sure that would be enough of a reduction. Anyone have other ideas? Thanks much! LeAnn ** LeAnn Lang Associates in Pathology Practice Administrator Phone: 715-847-0075 (ext 50259) ll...@aipathology.commailto:ll...@aipathology.com ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet This email, including any attachments sent with it, is confidential and for the sole use of the intended recipient(s). This confidentiality is not waived or lost, if you receive it and you are not the intended recipient(s), or if it is transmitted/received in error. Any unauthorised use, alteration, disclosure, distribution or review of this email is strictly prohibited. The information contained in this email, including any attachment sent with it, may be subject to a statutory duty of confidentiality if it relates to health service matters. If you are not the intended recipient(s), or if you have received this email in error, you are asked to immediately notify the sender by telephone collect on Australia +61 1800 198 175 or by return email. You should also delete this email, and any copies, from your computer system network and destroy any hard copies produced. If not an intended recipient of this email, you must not copy, distribute or take any action(s) that relies on it; any form of disclosure, modification, distribution and/or publication of this email is also prohibited. Although Queensland Health takes all reasonable steps to ensure this email does not contain malicious software, Queensland Health does not accept responsibility for the consequences if any person's computer inadvertently suffers any disruption to services, loss of information, harm or is infected with a virus, other malicious computer programme or code that may occur as a consequence of receiving this email. Unless stated otherwise, this email represents only the views of the sender and not the views of the Queensland Government. ** ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
[Histonet] RE: Histonet Digest, Vol 128, Issue 30
I have recently started to take over the control blocks for our lab department. I want to use/make a form that I can show how many blocks I have approved for each stain and which blocks are in use. I have looked a little online to see if there is a form out there that already exists, but can not seem to find one. I know that I can make it if needed, but seeing if anyone knows of one that is already made. Thanks. Rebecca Hayden, HTL (ASCP) Stormont-Vail Healthcare From: histonet-boun...@lists.utsouthwestern.edu [histonet-boun...@lists.utsouthwestern.edu] on behalf of histonet-requ...@lists.utsouthwestern.edu [histonet-requ...@lists.utsouthwestern.edu] Sent: Wednesday, July 30, 2014 12:03 PM To: histonet@lists.utsouthwestern.edu Subject: Histonet Digest, Vol 128, Issue 30 Send Histonet mailing list submissions to histonet@lists.utsouthwestern.edu To subscribe or unsubscribe via the World Wide Web, visit http://lists.utsouthwestern.edu/mailman/listinfo/histonet or, via email, send a message with subject or body 'help' to histonet-requ...@lists.utsouthwestern.edu You can reach the person managing the list at histonet-ow...@lists.utsouthwestern.edu When replying, please edit your Subject line so it is more specific than Re: Contents of Histonet digest... Today's Topics: 1. Processor Alarms (Cristi Stephenson) 2. Thank you! (Cristi) -- Message: 1 Date: Tue, 29 Jul 2014 11:33:35 -0700 From: Cristi Stephenson cls71...@gmail.com Subject: [Histonet] Processor Alarms To: histonet@lists.utsouthwestern.edu Message-ID: CAMjZ=fzybw-bszym2gazsits3dojuvtz8cuc_1khk80q_zv...@mail.gmail.com Content-Type: text/plain; charset=UTF-8 Hello Histoland, We have an ASP300S processor that is not currently monitored by Leica. I was wondering if anyone had an alarm system suggestion such that, in the event it does malfunction, it will notify a designated person. We are a private practice so there is no one in the building after normal working hours. Thanks in advance for any recommendations! Cristi -- Message: 2 Date: Tue, 29 Jul 2014 12:56:52 -0700 From: Cristi cls71...@gmail.com Subject: [Histonet] Thank you! To: histonet@lists.utsouthwestern.edu Message-ID: d28ed65b-66f5-443f-a6b6-11f3f06ed...@gmail.com Content-Type: text/plain; charset=utf-8 Thank you all for the responses on alarm systems for the processors. I knew they were out there but couldn't come up with the right combination for Google to understand what I was looking for Sent from my iPhone -- ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet End of Histonet Digest, Vol 128, Issue 30 * NEED A DOCTOR? Stormont-Vail's Health Connections can help you find a doctor accepting new patients. Call (785) 354-5225. ** The information transmitted in this e-mail and in any replies and forwards are for the sole use of the above individual(s) or entities and may contain proprietary, privileged and/or highly confidential information. Any unauthorized dissemination, review, distribution or copying of these communications is strictly prohibited. If this e-mail has been transmitted to you in error, please notify and return the original message to the sender immediately at the above listed address. Thank you for your cooperation. ** ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
[Histonet] Gyn requisition
I was wondering if anyone is willing to share a copy of your gyn or gyn oncology based requisitions? Trying to create one and was hoping for some helping getting started. Email or fax to 8433998932 if you're willing to help. Thanks in advance! Melissa Sent from my iPhone ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Re: [Histonet] RE: Histonet Digest, Vol 128, Issue 30
Rebecca, We use slide tray boxes with large index cards. We have first control slide - to prove block works. Then pre-cut control slides then one stained last control slide - to make sure entity is still there. And the block that is in use is stored in box with the slides. Index card notes control block, who cut controls, how many, date etc. We keep our slide boxes alphabetized and stored on shelving for easy use. Slide box is pulled anytime the controls get to 5 slides or less - Anytime a block is tested we keep a record (in our procedure manual) as to whether it is appropriate for that stain or not - it is numbered. We take block log sheet into pathologist to review controls - log sheet is a table with date, tissue type, block #, stain employed, acceptable for use, pathologist or technician initials. Does that help? Michael Ann Jones, HT (ASCP) Histology Manager Metropath 7444 W. Alaska Dr. #250 Lakewood, CO 80226 303.634.2511 mjo...@metropath.com On 7/31/14, 2:13 PM, Hayden, Rebecca rhay...@stormontvail.org wrote: I have recently started to take over the control blocks for our lab department. I want to use/make a form that I can show how many blocks I have approved for each stain and which blocks are in use. I have looked a little online to see if there is a form out there that already exists, but can not seem to find one. I know that I can make it if needed, but seeing if anyone knows of one that is already made. Thanks. Rebecca Hayden, HTL (ASCP) Stormont-Vail Healthcare From: histonet-boun...@lists.utsouthwestern.edu [histonet-boun...@lists.utsouthwestern.edu] on behalf of histonet-requ...@lists.utsouthwestern.edu [histonet-requ...@lists.utsouthwestern.edu] Sent: Wednesday, July 30, 2014 12:03 PM To: histonet@lists.utsouthwestern.edu Subject: Histonet Digest, Vol 128, Issue 30 Send Histonet mailing list submissions to histonet@lists.utsouthwestern.edu To subscribe or unsubscribe via the World Wide Web, visit http://lists.utsouthwestern.edu/mailman/listinfo/histonet or, via email, send a message with subject or body 'help' to histonet-requ...@lists.utsouthwestern.edu You can reach the person managing the list at histonet-ow...@lists.utsouthwestern.edu When replying, please edit your Subject line so it is more specific than Re: Contents of Histonet digest... Today's Topics: 1. Processor Alarms (Cristi Stephenson) 2. Thank you! (Cristi) -- Message: 1 Date: Tue, 29 Jul 2014 11:33:35 -0700 From: Cristi Stephenson cls71...@gmail.com Subject: [Histonet] Processor Alarms To: histonet@lists.utsouthwestern.edu Message-ID: CAMjZ=fzybw-bszym2gazsits3dojuvtz8cuc_1khk80q_zv...@mail.gmail.com Content-Type: text/plain; charset=UTF-8 Hello Histoland, We have an ASP300S processor that is not currently monitored by Leica. I was wondering if anyone had an alarm system suggestion such that, in the event it does malfunction, it will notify a designated person. We are a private practice so there is no one in the building after normal working hours. Thanks in advance for any recommendations! Cristi -- Message: 2 Date: Tue, 29 Jul 2014 12:56:52 -0700 From: Cristi cls71...@gmail.com Subject: [Histonet] Thank you! To: histonet@lists.utsouthwestern.edu Message-ID: d28ed65b-66f5-443f-a6b6-11f3f06ed...@gmail.com Content-Type: text/plain; charset=utf-8 Thank you all for the responses on alarm systems for the processors. I knew they were out there but couldn't come up with the right combination for Google to understand what I was looking for Sent from my iPhone -- ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet End of Histonet Digest, Vol 128, Issue 30 * NEED A DOCTOR? Stormont-Vail's Health Connections can help you find a doctor accepting new patients. Call (785) 354-5225. ** The information transmitted in this e-mail and in any replies and forwards are for the sole use of the above individual(s) or entities and may contain proprietary, privileged and/or highly confidential information. Any unauthorized dissemination, review, distribution or copying of these communications is strictly prohibited. If this e-mail has been transmitted to you in error, please notify and return the original message to the sender immediately at the above listed address. Thank you for your cooperation. ** ___ Histonet mailing list Histonet@lists.utsouthwestern.edu