Re: [Histonet] Bone marrow clot IHC tissue sections washing

2021-09-23 Thread Regan Fulton via Histonet
Martha,

We reported our study of 15 brands of adhesive slides for "wash off" and
found little difference among the different slides when well-fixed cell
culture material was examined.
On the other hand, poorly-fixed breast cancer tissues did appear to adhere
more strongly to some slides than others (TOMO being among the best).
Additional factors need to be considered, though, and I note that your
baking procedure is different from what is recommended by many slide
vendors.
In general, baking at 60-65 deg C for 1 hour is said to be optimal,
although we did not examine that parameter specifically.

Please see our poster at https://www.arrayscience.com/publications#Posters

Best regards,



Regan
Regan Fulton, M.D., Ph.D.
CEO and Co-Founder
Array Science, LLC
475 Gate 5 Road, #100
Sausalito, CA 94965
(415) 577-7360
email: ful...@arrayscience.com


www.arrayscience.com



On Thu, Sep 23, 2021 at 1:02 PM Martha Ward-Pathology via Histonet <
histonet@lists.utsouthwestern.edu> wrote:

> It was brought to my attention that we had significant washing on  3 of 8
> bone marrow clot sections the other day; this is not the first time so we
> would like to get to the bottom of this.   We use positively charged slides
> and all 8 cases were cut and run the same morning but allowed to air dry
> and then bake at 60C for 20 minutes before being run on our Bond 3
> stainer.   Has anyone out there experienced this type of problem and if so,
> what were your solutions?The repeat of the 3 cases today showed similar
> washing of tissue.
>
> This hasn't just started but has occurred periodically but the
> pathologists have tried to live with it and usually we can finally get
> enough tissue to stay on after 1-2 attempts.   Suggestions include cutting
> and drying the slides overnight and/or going to a gelatinated  slide versus
> a sialylated slide.   We have been using this particular brand of positive
> charged slide with good results for several years and rarely have issues
> with other tissue types unless they are particularly bloody.
>
> Thoughts or suggestions are greatly appreciated.
>
>
> Martha Ward MT(ASCP) QIHC
> Atrium Health Wake Forest Baptist
>
>
>
> ___
> Histonet mailing list
> Histonet@lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] Bone marrow clot IHC tissue sections washing

2021-09-23 Thread Martha Ward-Pathology via Histonet
It was brought to my attention that we had significant washing on  3 of 8 bone 
marrow clot sections the other day; this is not the first time so we would like 
to get to the bottom of this.   We use positively charged slides and all 8 
cases were cut and run the same morning but allowed to air dry and then bake at 
60C for 20 minutes before being run on our Bond 3 stainer.   Has anyone out 
there experienced this type of problem and if so, what were your solutions?
The repeat of the 3 cases today showed similar washing of tissue.

This hasn't just started but has occurred periodically but the pathologists 
have tried to live with it and usually we can finally get enough tissue to stay 
on after 1-2 attempts.   Suggestions include cutting and drying the slides 
overnight and/or going to a gelatinated  slide versus a sialylated slide.   We 
have been using this particular brand of positive charged slide with good 
results for several years and rarely have issues with other tissue types unless 
they are particularly bloody.

Thoughts or suggestions are greatly appreciated.


Martha Ward MT(ASCP) QIHC
Atrium Health Wake Forest Baptist



___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet