Terri L. Braud, HT(ASCP)
HNL Laboratories for
Holy Redeemer Hospital
1648 Huntingdon Pike
Meadowbrook, PA 19046
Ph: 215-938-3689
Fax: 215-938-3874
Honesty
AccouNtability
AgiLity
CoLlaboration
CoMpassion
You can reach the person managing the list at
histonet-ow...@lists.utsouthwestern.edu
When replying, please edit your Subject line so it is more specific than "Re:
Contents of Histonet digest..."
Today's Topics:
1. Cryostat anti-roll plate (Ken Marzinsky)
2. Re: Cryostat anti-roll plate (Keyser, Geri L)
3. Re: Cryostat anti-roll plate (Anne Murvosh)
4. Re: Cryostat anti-roll plate (Keyser, Geri L)
5. Re: Cryostat anti-roll plate (Keyser, Geri L)
----------------------------------------------------------------------
Message: 1
Date: Tue, 24 May 2022 20:16:10 +0000
From: Ken Marzinsky <kdea...@hotmail.com>
To: "histonet@lists.utsouthwestern.edu"
<histonet@lists.utsouthwestern.edu>
Subject: [Histonet] Cryostat anti-roll plate
Message-ID:
<byapr03mb4822a0499148ed2983d69e05ad...@byapr03mb4822.namprd03.prod.outlook.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi everyone. Does anyone regularly use the anti-roll plate on their cryostat?
Does it work well on the Leicas and Microms, or do you have to figit with it a
lot? Does anyone have any tricks they can share to get it to work all the time?
I found that a little spritz of freeze spray on the plate and the bottom of
the roll glass helps, but it is still seems a lot easier for us to use a brush
or a teasing needle.
Ken
Durham, NC
------------------------------
Message: 2
Date: Wed, 25 May 2022 12:15:06 +0000
From: "Keyser, Geri L" <gkey...@uwhealth.org>
To: "histonet@lists.utsouthwestern.edu"
<histonet@lists.utsouthwestern.edu>
Subject: Re: [Histonet] Cryostat anti-roll plate
Message-ID:
<dm6pr17mb410180b500cf5d01bf99a8aac4...@dm6pr17mb4101.namprd17.prod.outlook.com>
Content-Type: text/plain; charset="us-ascii"
I use roll plate.
I don't like the roll plate on the Leica. The Leica design creeps... a lot.
Also, with the leica, the contact point with the blade is a soft aluminum arm.
If you make adjustments with the roll plate holder contacting the blade, it
will damage the soft aluminum holder.
I like the thermo design much better. It creeps a lot less.
Here's a procedure for roll plate adjustment.
1. Mount block on specimen disc.
2. Place Specimen Disc in chuck, position Blade carrier, and face off.
3. Turn knurling screw clockwise until sections do not pass under the
Anti-roll plate.
4. Turn knurling screw counter-clockwise by 20 degree increments until
sections effortlessly pass under the Anti-Roll Plate WITHOUT hitting the block.
* If the block is hitting the anti-roll plate, it may cause damage to
glass.
* Hard contact is visible and can be heard.
* Soft contact, which can also damage the Anti-roll plate, cannot be seen
or heard. But, can be felt by gently placing finger on the anti-roll plate
turning lever while taking a section.
Geri
-----Original Message-----
From: Ken Marzinsky via Histonet <histonet@lists.utsouthwestern.edu>
Sent: Tuesday, May 24, 2022 3:16 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Cryostat anti-roll plate
WARNING: This email appears to have originated outside of the UW Health email
system.
DO NOT CLICK on links or attachments unless you recognize the sender and know
the content is safe.
Hi everyone. Does anyone regularly use the anti-roll plate on their cryostat?
Does it work well on the Leicas and Microms, or do you have to figit with it a
lot? Does anyone have any tricks they can share to get it to work all the time?
I found that a little spritz of freeze spray on the plate and the bottom of
the roll glass helps, but it is still seems a lot easier for us to use a brush
or a teasing needle.
Ken
Durham, NC
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
------------------------------
Message: 3
Date: Wed, 25 May 2022 13:32:12 +0000
From: Anne Murvosh <amurv...@advancederm.net>
To: Ken Marzinsky <kdea...@hotmail.com>,
"histonet@lists.utsouthwestern.edu"
<histonet@lists.utsouthwestern.edu>
Subject: Re: [Histonet] Cryostat anti-roll plate
Message-ID:
<
st them. They creep forward so much that I just automatically know to roll
imw4pr15mb45615d24e17f493a42281080c6...@mw4pr15mb4561.namprd15.prod.outlook.com>
Content-Type: text/plain; charset="us-ascii"
We have 3 new leicas and we constantly have to adju t slightly back after every
4 specimens or so. The new leica designs are just bad and customer service is
even worse. We have to use the plate as we do Mohs specimens and the sections
are just better with the glass plate. I want to look for a different machine
next time. We did test the Avantik and it cut nice but the glass plate was on
the front and got in the way. I wish they would talk to Mohs techs before they
design these. Oh well. No tricks just constant adjusting. Thanks Anne
-----Original Message-----
From: Ken Marzinsky via Histonet <histonet@lists.utsouthwestern.edu>
Sent: Tuesday, May 24, 2022 1:16 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Cryostat anti-roll plate
Hi everyone. Does anyone regularly use the anti-roll plate on their cryostat?
Does it work well on the Leicas and Microms, or do you have to figit with it a
lot? Does anyone have any tricks they can share to get it to work all the time?
I found that a little spritz of freeze spray on the plate and the bottom of
the roll glass helps, but it is still seems a lot easier for us to use a brush
or a teasing needle.
Ken
Durham, NC
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.utsouthwestern.edu%2Fmailman%2Flistinfo%2Fhistonet&data=05%7C01%7Camurvosh%40advancederm.net%7Cd00ec7fb978f48d5784b08da3dc25292%7Cc026b5a4e9b54bdfb53b7130122cdb95%7C0%7C0%7C637890202080603264%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Uhz9rhvCBTV95t%2BNEs0ocizQBXV7aAQyxswaE2Thm2E%3D&reserved=0
HIPAA Confidentiality Notice: The information and documents accompanying this
e-mail may contain confidential information that is legally privileged and
protected by federal and state law. The information is intended for use only by
the entity or individual to whom it is addressed, the authorized recipient. The
authorized recipient is obligated to maintain the information in a safe,
secure, and confidential manner. The authorized recipient is prohibited from
using the information for purposes other than intended, prohibited from
disclosing the information to any other party unless required to do so by law
or regulation, and is required to destroy the information after its stated need
has been fulfilled. If you are in possession of this information, and are not
the intended recipient, you are hereby notified that any improper disclosure,
copying, or distribution of the information is strictly prohibited. Please
notify the owner of the information immediately and arrange for its return or
destruction.
------------------------------
Message: 4
Date: Wed, 25 May 2022 14:59:04 +0000
From: "Keyser, Geri L" <gkey...@uwhealth.org>
To: Anne Murvosh <amurv...@advancederm.net>, Ken Marzinsky
<kdea...@hotmail.com>, "histonet@lists.utsouthwestern.edu"
<histonet@lists.utsouthwestern.edu>
Subject: Re: [Histonet] Cryostat anti-roll plate
Message-ID:
<dm6pr17mb410181f7c2a9dcd736e68fd9c4...@dm6pr17mb4101.namprd17.prod.outlook.com>
Content-Type: text/plain; charset="us-ascii"
Maybe there's a product that increases friction with screw threads, doesn't
have toxic outgassing, and works at low temperatures.
I'm going to look for something like this.
Geri
-----Original Message-----
From: Anne Murvosh via Histonet <histonet@lists.utsouthwestern.edu>
Sent: Wednesday, May 25, 2022 8:32 AM
To: Ken Marzinsky <kdea...@hotmail.com>; histonet@lists.utsouthwestern.edu
Subject: Re: [Histonet] Cryostat anti-roll plate
WARNING: This email appears to have originated outside of the UW Health email
system.
DO NOT CLICK on links or attachments unless you recognize the sender and know
the content is safe.
We have 3 new leicas and we constantly have to adjust them. They creep forward
so much that I just automatically know to roll it slightly back after every 4
specimens or so. The new leica designs are just bad and customer service is
even worse. We have to use the plate as we do Mohs specimens and the sections
are just better with the glass plate. I want to look for a different machine
next time. We did test the Avantik and it cut nice but the glass plate was on
the front and got in the way. I wish they would talk to Mohs techs before they
design these. Oh well. No tricks just constant adjusting. Thanks Anne
-----Original Message-----
From: Ken Marzinsky via Histonet <histonet@lists.utsouthwestern.edu>
Sent: Tuesday, May 24, 2022 1:16 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Cryostat anti-roll plate
Hi everyone. Does anyone regularly use the anti-roll plate on their cryostat?
Does it work well on the Leicas and Microms, or do you have to figit with it a
lot? Does anyone have any tricks they can share to get it to work all the time?
I found that a little spritz of freeze spray on the plate and the bottom of
the roll glass helps, but it is still seems a lot easier for us to use a brush
or a teasing needle.
Ken
Durham, NC
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.utsouthwestern.edu%2Fmailman%2Flistinfo%2Fhistonet&data=05%7C01%7Camurvosh%40advancederm.net%7Cd00ec7fb978f48d5784b08da3dc25292%7Cc026b5a4e9b54bdfb53b7130122cdb95%7C0%7C0%7C637890202080603264%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Uhz9rhvCBTV95t%2BNEs0ocizQBXV7aAQyxswaE2Thm2E%3D&reserved=0
HIPAA Confidentiality Notice: The information and documents accompanying this
e-mail may contain confidential information that is legally privileged and
protected by federal and state law. The information is intended for use only by
the entity or individual to whom it is addressed, the authorized recipient. The
authorized recipient is obligated to maintain the information in a safe,
secure, and confidential manner. The authorized recipient is prohibited from
using the information for purposes other than intended, prohibited from
disclosing the information to any other party unless required to do so by law
or regulation, and is required to destroy the information after its stated need
has been fulfilled. If you are in possession of this information, and are not
the intended recipient, you are hereby notified that any improper disclosure,
copying, or distribution of the information is strictly prohibited. Please
notify the owner of the information immediately and arrange for its return or
destruction.
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
------------------------------
Message: 5
Date: Wed, 25 May 2022 15:02:25 +0000
From: "Keyser, Geri L" <gkey...@uwhealth.org>
To: "Keyser, Geri L" <gkey...@uwhealth.org>, Anne Murvosh
<amurv...@advancederm.net>, Ken Marzinsky <kdea...@hotmail.com>,
"histonet@lists.utsouthwestern.edu"
<histonet@lists.utsouthwestern.edu>
Subject: Re: [Histonet] Cryostat anti-roll plate
Message-ID:
<dm6pr17mb41017ab0b76f4a1ec82ab2ddc4...@dm6pr17mb4101.namprd17.prod.outlook.com>
Content-Type: text/plain; charset="utf-8"
Got it...
I need to test it.
But, I'm going to take some parafilm, pull it over the bolt, then replace the
screw.
Increase that friction. ?
Geri
-----Original Message-----
From: Keyser, Geri L via Histonet <histonet@lists.utsouthwestern.edu>
Sent: Wednesday, May 25, 2022 9:59 AM
To: Anne Murvosh <amurv...@advancederm.net>; Ken Marzinsky
<kdea...@hotmail.com>; histonet@lists.utsouthwestern.edu
Subject: Re: [Histonet] Cryostat anti-roll plate
Maybe there's a product that increases friction with screw threads, doesn't
have toxic outgassing, and works at low temperatures.
I'm going to look for something like this.
Geri
-----Original Message-----
From: Anne Murvosh via Histonet <histonet@lists.utsouthwestern.edu>
Sent: Wednesday, May 25, 2022 8:32 AM
To: Ken Marzinsky <kdea...@hotmail.com>; histonet@lists.utsouthwestern.edu
Subject: Re: [Histonet] Cryostat anti-roll plate
WARNING: This email appears to have originated outside of the UW Health email
system.
DO NOT CLICK on links or attachments unless you recognize the sender and know
the content is safe.
We have 3 new leicas and we constantly have to adjust them. They creep forward
so much that I just automatically know to roll it slightly back after every 4
specimens or so. The new leica designs are just bad and customer service is
even worse. We have to use the plate as we do Mohs specimens and the sections
are just better with the glass plate. I want to look for a different machine
next time. We did test the Avantik and it cut nice but the glass plate was on
the front and got in the way. I wish they would talk to Mohs techs before they
design these. Oh well. No tricks just constant adjusting. Thanks Anne
-----Original Message-----
From: Ken Marzinsky via Histonet <histonet@lists.utsouthwestern.edu>
Sent: Tuesday, May 24, 2022 1:16 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Cryostat anti-roll plate
Hi everyone. Does anyone regularly use the anti-roll plate on their cryostat?
Does it work well on the Leicas and Microms, or do you have to figit with it a
lot? Does anyone have any tricks they can share to get it to work all the time?
I found that a little spritz of freeze spray on the plate and the bottom of
the roll glass helps, but it is still seems a lot easier for us to use a brush
or a teasing needle.
Ken
Durham, NC
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.utsouthwestern.edu%2Fmailman%2Flistinfo%2Fhistonet&data=05%7C01%7Camurvosh%40advancederm.net%7Cd00ec7fb978f48d5784b08da3dc25292%7Cc026b5a4e9b54bdfb53b7130122cdb95%7C0%7C0%7C637890202080603264%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Uhz9rhvCBTV95t%2BNEs0ocizQBXV7aAQyxswaE2Thm2E%3D&reserved=0
HIPAA Confidentiality Notice: The information and documents accompanying this
e-mail may contain confidential information that is legally privileged and
protected by federal and state law. The information is intended for use only by
the entity or individual to whom it is addressed, the authorized recipient. The
authorized recipient is obligated to maintain the information in a safe,
secure, and confidential manner. The authorized recipient is prohibited from
using the information for purposes other than intended, prohibited from
disclosing the information to any other party unless required to do so by law
or regulation, and is required to destroy the information after its stated need
has been fulfilled. If you are in possession of this information, and are not
the intended recipient, you are hereby notified that any improper disclosure,
copying, or distribution of the information is strictly prohibited. Please
notify the owner of the information immediately and arrange for its return or
destruction.
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
------------------------------
Subject: Digest Footer
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
------------------------------
End of Histonet Digest, Vol 222, Issue 17
*****************************************
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
