Minnie
This is what I have used for years as a dryer. You can go onto the TBS website
:
SD-II-120 Slide Dryer II, forced air, holds 2 conventional slide stainer racks,
overheat protection switch, ambient to 75°C. Specifications: 100-120VAC,
50/60Hz, 2A; SD-II-220: 220-240VAC, 50/60Hz, 2A. WxDxH: (11x10x5)
(26x28x13)(in)(cm). Weight: 11lbs, 5kg
As far as fire goes, I do know someone that happen to and it could have been a
disaster had it not been for quick thinking on the techs part.
Kate Mendell
Histopathology/Lab Manager
HOWARD S. GOLDBERG, M.D., INC
990 Paradise Road
Swampscott, MA 01907
TEL: 781.595.0151
FAX: 781.592.6780
kmend...@goldbergmd.net
www.cosmesticdermcenter.com
PRIVACY NOTICE: This e-mail message may contain confidential patient or other
information belonging to the sender that is legally privileged. This
information is intended only for the use of the individual or authorized entity
named above. The authorized recipient of this patient or other confidential
information is prohibited from disclosing the information to any other party.
If you have received this message in error, please notify the sender
immediately and delete. Please keep any information you may have viewed
confidential.
From: histonet-boun...@lists.utsouthwestern.edu
[histonet-boun...@lists.utsouthwestern.edu] on behalf of WILLIAM DESALVO
[wdesalvo@outlook.com]
Sent: Wednesday, May 22, 2013 10:08 AM
To: Maribel Santiago; histonet
Subject: RE: [Histonet] Oven recommendations
Since you state you are in reasearch, consider air drying your slides. You only
need to remove the water between the paraffin section and the glass slide to
allow adhesion of the proteins in the tissue sample to the glass. Melting the
paraffin in not necessary, your deparaffinization steps in the routine and
special staining protocols will adequately remove the paraffin from the tissue
section.
Using an oven that was not designed to melt paraffin off the glass slide can
be very hazardous. The parafin can drop don into the heating elementsand cause
an ignition and fire.
William DeSalvo, BS HTL(ASCP)
Production Manager-Anatomic Pathology
Chair, NSH Quality Management Committee
Owner/Consultant, Collaborative Advantage Consulting
From: minnies...@hotmail.com
To: histonet@lists.utsouthwestern.edu
Date: Wed, 22 May 2013 13:55:46 +
Subject: [Histonet] Oven recommendations
Hi All,
I had just received a letter from Boekel (models 107800-107801 or 107905 in
either 120v or 230v) that my oven can not be used to melt wax of any kind. as
this is our bread and butter and need some suggestions to what kind or brand
is used that is good for us (histologists). I need a little one since I'm in
research and I don't need a big one due to the lack of volume. Does anyone
have suggestions or can point me in the right direction, Please?
Thanks so much and have a great day!!!Minnie
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet