Re: [hlcoders] Re: 3 round burst
SSS. THEY are listening... On 5/12/05, tei <[EMAIL PROTECTED]> wrote: > Man, I love this mail list. > > What will be the next topic? home made fision bombs? > > :DDD > > McCormack, Chris wrote: > > hehe this thread is insane, I think some of the contributors may possibly > > be on FBI watch lists :P > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Michael A. > > Hobson > > Sent: 11 May 2005 06:11 > > To: hlcoders@list.valvesoftware.com > > Subject: Re: [hlcoders] Re: 3 round burst > > > > > > root 3:16, > > > > Just for once, maybe you could stop pretending to be the all-knowing > > infallible font of knowledge you seem to think you are as demonstrated > > by at least half your posts to this list ? > > > > At 08:55 PM 5/10/2005, you wrote: > > > > >3 sites I went to .org's .mils have the same thing it fires 3 rounds > > > >>automatically in burst mode. > >> > >>http://www.au.af.mil/au/awc/systems/dvic534.htm > > > > > > Link above is not to an actual training manual, wherein one might > > learn all the subtle nuances of the weapon. > > > > Are you suggesting that some random web pages are superior in > > authority to an actual scanned *US MARINE CLASS TRAINING > > MANUAL* ??? > > > > > >>At any rate, I have shot the M16A2, when you pull and release it fires 3 > >>rounds. Regardless if you pull and hold the trigger or just pull and release > >>the trigger. > > > > > > Did you actually try to make it cut the bursts short ? > > > > Why do I find that hard to believe? > > > > I shall now quote from page 4 (top paragraph) of the M16A2 MILSPEC > > document for the M16A2 Assault Rifle: "MIL-R-63997B(AR) MILITARY > > SPECIFICATION Rifle, 5.56mm: M16A2", which is > > available from Armalite (the "AR" in AR-15) at the following URL: > > > > http://www.ar15.com/content/manuals/m16a2milspec.pdf > > > > quote: > > "... When the selector is placed in the "BURST" > > "position, it shall permit the automatic sear to engage the hammer, > > "so that the rifle is capable of burst firing. (One, two, or three > > "continuous sh[[... NO CARRIER > > ___ > To unsubscribe, edit your list preferences, or view the list archives, please > visit: > http://list.valvesoftware.com/mailman/listinfo/hlcoders > > -- = Childe Roland "I will show you fear in a handful of jellybeans." ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] Re: 3 round burst
Man, I love this mail list. What will be the next topic? home made fision bombs? :DDD McCormack, Chris wrote: hehe this thread is insane, I think some of the contributors may possibly be on FBI watch lists :P -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Michael A. Hobson Sent: 11 May 2005 06:11 To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] Re: 3 round burst root 3:16, Just for once, maybe you could stop pretending to be the all-knowing infallible font of knowledge you seem to think you are as demonstrated by at least half your posts to this list ? At 08:55 PM 5/10/2005, you wrote: >3 sites I went to .org's .mils have the same thing it fires 3 rounds automatically in burst mode. http://www.au.af.mil/au/awc/systems/dvic534.htm Link above is not to an actual training manual, wherein one might learn all the subtle nuances of the weapon. Are you suggesting that some random web pages are superior in authority to an actual scanned *US MARINE CLASS TRAINING MANUAL* ??? At any rate, I have shot the M16A2, when you pull and release it fires 3 rounds. Regardless if you pull and hold the trigger or just pull and release the trigger. Did you actually try to make it cut the bursts short ? Why do I find that hard to believe? I shall now quote from page 4 (top paragraph) of the M16A2 MILSPEC document for the M16A2 Assault Rifle: "MIL-R-63997B(AR) MILITARY SPECIFICATION Rifle, 5.56mm: M16A2", which is available from Armalite (the "AR" in AR-15) at the following URL: http://www.ar15.com/content/manuals/m16a2milspec.pdf quote: "... When the selector is placed in the "BURST" "position, it shall permit the automatic sear to engage the hammer, "so that the rifle is capable of burst firing. (One, two, or three "continuous sh[[... NO CARRIER ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] Re: 3 round burst
Nowhere did I state I tried to know it all. I was showing YOU what I found. But then the insults have to come which show how mature you really are. I posted .mil sites as you suggested and they said the same thing. It fires 3 rounds automatically. Nowhere did I say I was right nore did I say any of you were wrong. I am going from what I have read and from my own personal experience. I guess you are the one who is trying to prove me wrong. Ok I am wrong, you are right, happy? Does that make you feel better? Freaking kills me about some of the people on this list who have to be jackasses. Just because someone disagrees with them. Right or wrong. I do not think ANY of my posts on this list suggest I am some super knowledgable person. As you pointed out no I did not really try to stop the burst from happening. But I do not remember having to hold the trigger either to fire 3 bursts. As I also said it was quite awhile back. Thanks omega for pointing this all out. I was not aware that burst's actually could be interrupted like that, and that you had to actually hold the trigger to fire the 3 rounds. I appologize. r00t 3:16 CQC Gaming www.cqc-gaming.com - Original Message - From: "Michael A. Hobson" <[EMAIL PROTECTED]> To: Sent: Wednesday, May 11, 2005 1:11 AM Subject: Re: [hlcoders] Re: 3 round burst root 3:16, Just for once, maybe you could stop pretending to be the all-knowing infallible font of knowledge you seem to think you are as demonstrated by at least half your posts to this list ? At 08:55 PM 5/10/2005, you wrote: >3 sites I went to .org's .mils have the same thing it fires 3 rounds automatically in burst mode. http://www.au.af.mil/au/awc/systems/dvic534.htm Link above is not to an actual training manual, wherein one might learn all the subtle nuances of the weapon. Are you suggesting that some random web pages are superior in authority to an actual scanned *US MARINE CLASS TRAINING MANUAL* ??? At any rate, I have shot the M16A2, when you pull and release it fires 3 rounds. Regardless if you pull and hold the trigger or just pull and release the trigger. Did you actually try to make it cut the bursts short ? Why do I find that hard to believe? I shall now quote from page 4 (top paragraph) of the M16A2 MILSPEC document for the M16A2 Assault Rifle: "MIL-R-63997B(AR) MILITARY SPECIFICATION Rifle, 5.56mm: M16A2", which is available from Armalite (the "AR" in AR-15) at the following URL: http://www.ar15.com/content/manuals/m16a2milspec.pdf quote: "... When the selector is placed in the "BURST" "position, it shall permit the automatic sear to engage the hammer, "so that the rifle is capable of burst firing. (One, two, or three "continuous shots the first time the trigger is pulled and held "back. Three continuous shots on the second and each successive "time the trigger is pulled and held back. One, two or three shots "if the trigger is released before completion of the three shot "cycle or all cartridges are expended before completion of the "three shot cycle.)" This is from the DoD manufacturing specification for the M16A2 dated 12 December 1986. Do you think you know more about this weapon than both the USMC and the DoD? Michael A. Hobson email: [EMAIL PROTECTED] (310) 344-3585 (cell) ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
RE: [hlcoders] Re: 3 round burst
Yeah, unlike the mp5's counting wheel, the m4 isn't "no-memory", it remembers where you were when you interrupt. It still doesn't "automatically fire 3 shots when you press and let go" like root seems to think it does (which is what both Michael and I had said, AND as the specs for *both* guns do). When I posted last night I didn't have access to the m4 manual, but I own an mp5 one, so it's a little different there, it's nice to know that the m4 does have burst memory though, as I did not know that. Root: What I said about how they work *is* how they all work, the only difference is if the gun has "memory" or not. When you let go of the trigger it STOPS firing. You can do semi-automatic in burst mode if you're quick enough. And in video games 9 out of 10 people are quick enough to do it, without cheats :P (then again, I've yet to see an FPS that uses an accurate fire rate as it would be insane, especially while trace based, or even physically simulated) Anyway, to go back to my original post on the subject. Burst memory guns: During idle: if (m_nShotsFired > 2) m_nShotsFired = 0; Burst no-memory guns: During idle: m_nShotsFired = 0; During fire: If (m_nShotsFired > 2) Return; //don't fire anymore, already gone through 3 bullets. amazing, utterly amazing. And there is already code for m_nShotsFired = 0; as well as m_nShotsFired++; !! Woe is me. -omega -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.8 - Release Date: 10/05/2005 ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
RE: [hlcoders] Re: 3 round burst
hehe this thread is insane, I think some of the contributors may possibly be on FBI watch lists :P -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Michael A. Hobson Sent: 11 May 2005 06:11 To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] Re: 3 round burst root 3:16, Just for once, maybe you could stop pretending to be the all-knowing infallible font of knowledge you seem to think you are as demonstrated by at least half your posts to this list ? At 08:55 PM 5/10/2005, you wrote: >3 sites I went to .org's .mils have the same thing it fires 3 rounds >automatically in burst mode. > >http://www.au.af.mil/au/awc/systems/dvic534.htm Link above is not to an actual training manual, wherein one might learn all the subtle nuances of the weapon. Are you suggesting that some random web pages are superior in authority to an actual scanned *US MARINE CLASS TRAINING MANUAL* ??? >At any rate, I have shot the M16A2, when you pull and release it fires 3 >rounds. Regardless if you pull and hold the trigger or just pull and release >the trigger. Did you actually try to make it cut the bursts short ? Why do I find that hard to believe? I shall now quote from page 4 (top paragraph) of the M16A2 MILSPEC document for the M16A2 Assault Rifle: "MIL-R-63997B(AR) MILITARY SPECIFICATION Rifle, 5.56mm: M16A2", which is available from Armalite (the "AR" in AR-15) at the following URL: http://www.ar15.com/content/manuals/m16a2milspec.pdf quote: "... When the selector is placed in the "BURST" "position, it shall permit the automatic sear to engage the hammer, "so that the rifle is capable of burst firing. (One, two, or three "continuous shots the first time the trigger is pulled and held "back. Three continuous shots on the second and each successive "time the trigger is pulled and held back. One, two or three shots "if the trigger is released before completion of the three shot "cycle or all cartridges are expended before completion of the "three shot cycle.)" This is from the DoD manufacturing specification for the M16A2 dated 12 December 1986. Do you think you know more about this weapon than both the USMC and the DoD? Michael A. Hobson email: [EMAIL PROTECTED] (310) 344-3585 (cell) ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders * This e-mail and its attachments are confidential and are intended for the above named recipient only. If this has come to you in error, please notify the sender immediately and delete this e-mail from your system. You must take no action based on this, nor must you copy or disclose it or any part of its contents to any person or organisation. Statements and opinions contained in this email may not necessarily represent those of Littlewoods Group Limited or it's subsidiaries. Please note that e-mail communications may be monitored. The Registered Office of Littlewoods Group Limited and it's subsidiaries is 100 Old Hall Street, Liverpool, L70 1AB. Registered number of Littlewoods Group Limited is 5059352. * This message has been scanned for viruses by BlackSpider MailControl - www.blackspider.com ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] Re: 3 round burst
root 3:16, Just for once, maybe you could stop pretending to be the all-knowing infallible font of knowledge you seem to think you are as demonstrated by at least half your posts to this list ? At 08:55 PM 5/10/2005, you wrote: >3 sites I went to .org's .mils have the same thing it fires 3 rounds automatically in burst mode. http://www.au.af.mil/au/awc/systems/dvic534.htm Link above is not to an actual training manual, wherein one might learn all the subtle nuances of the weapon. Are you suggesting that some random web pages are superior in authority to an actual scanned *US MARINE CLASS TRAINING MANUAL* ??? At any rate, I have shot the M16A2, when you pull and release it fires 3 rounds. Regardless if you pull and hold the trigger or just pull and release the trigger. Did you actually try to make it cut the bursts short ? Why do I find that hard to believe? I shall now quote from page 4 (top paragraph) of the M16A2 MILSPEC document for the M16A2 Assault Rifle: "MIL-R-63997B(AR) MILITARY SPECIFICATION Rifle, 5.56mm: M16A2", which is available from Armalite (the "AR" in AR-15) at the following URL: http://www.ar15.com/content/manuals/m16a2milspec.pdf quote: "... When the selector is placed in the "BURST" "position, it shall permit the automatic sear to engage the hammer, "so that the rifle is capable of burst firing. (One, two, or three "continuous shots the first time the trigger is pulled and held "back. Three continuous shots on the second and each successive "time the trigger is pulled and held back. One, two or three shots "if the trigger is released before completion of the three shot "cycle or all cartridges are expended before completion of the "three shot cycle.)" This is from the DoD manufacturing specification for the M16A2 dated 12 December 1986. Do you think you know more about this weapon than both the USMC and the DoD? Michael A. Hobson email: [EMAIL PROTECTED] (310) 344-3585 (cell) ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] Re: 3 round burst
r00t: I don't think you get the point of his mail. Indeed, each trigger pull is limited to a 3 rounds. The point is that you are able to interrupt the burst by releasing the trigger before you finish. Most of the references you're pointing out cite three bullets per pull, but they aren't as specific as his in pointing out the mechanism. And while you did fire the rifle, I doubt you took care to verify this particular point. mail2web - Check your email from the web at http://mail2web.com/ . ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] Re: 3 round burst
Right then when u read up a couple of sections it says the same thing I posted. When the trigger is pulled 3 rounds are fired. With the same URL you gave.. Combination of automatic and semiautomatic fire . Some weapons, designed to fire automatically or semi-automatically, have a selector that permits the shooter to choose the type of fire desired. . Burst control. The M16A2 fires automatically for three rounds when the selector is on burst. Therefore, the M16A2 combines both automatic and semiautomatic fire but is limited to a maximum of three rounds in one burst of fire. Then there is another part about burst and then has that NOTE: At any rate, I have shot the M16A2, when you pull and release it fires 3 rounds. Regardless if you pull and hold the trigger or just pull and release the trigger. Although that was quite a few years back so maybe they redid this dunno... 3 sites I went to .org's .mils have the same thing it fires 3 rounds automatically in burst mode. http://www.au.af.mil/au/awc/systems/dvic534.htm r00t 3:16 CQC Gaming www.cqc-gaming.com - Original Message - From: "Michael A. Hobson" <[EMAIL PROTECTED]> To: Sent: Tuesday, May 10, 2005 11:20 PM Subject: Re: [hlcoders] Re: 3 round burst root 3:16, At 07:16 PM 5/10/2005, you wrote: Not all weapons fire like that. Burst Mode on the M16A2 fires 3 rounds when you pull the trigger. Then fires another 3 rounds when you pull the trigger again. http://usmilitary.about.com/od/weapons/l/blm16a2.htm burst control device, that limits the number of rounds fired in the automatic mode to three per trigger pull, which increases accuracy while reducing ammunition expenditure You should know better than to expect to get accurate information about military weapons from anywhere but the manufacturer's site or a .MIL domain training- related site. According to the U.S. Marine Corp Basic School Weapons Handling and Safety Course student handout (B2200) notes for the M16 Family page 25 (top): NOTE: The burst cam is not "self-indexing." If BURST is selected, the burst cam does not automatically reset to the first shot position of the 3-round burst unless the trigger is released before the cycle is complete. If the trigger is released during the burst, and the 3-round cycle is interrupted, the next pull of the trigger fires the rounds remaining in the interrupted cycle. You can grab the PDF version of that manual at URL: https://www.tbs.usmc.mil/Pages/Downloads/Student%20Handouts/Weapons/B2200%20Weapons%20Handling%20and%20Safety.pdf (if the list mailer mangles this link, reassemble it with copy/paste) Michael A. Hobson email: [EMAIL PROTECTED] (310) 344-3585 (cell) ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] Re: 3 round burst
root 3:16, At 07:16 PM 5/10/2005, you wrote: Not all weapons fire like that. Burst Mode on the M16A2 fires 3 rounds when you pull the trigger. Then fires another 3 rounds when you pull the trigger again. http://usmilitary.about.com/od/weapons/l/blm16a2.htm burst control device, that limits the number of rounds fired in the automatic mode to three per trigger pull, which increases accuracy while reducing ammunition expenditure You should know better than to expect to get accurate information about military weapons from anywhere but the manufacturer's site or a .MIL domain training- related site. According to the U.S. Marine Corp Basic School Weapons Handling and Safety Course student handout (B2200) notes for the M16 Family page 25 (top): NOTE: The burst cam is not "self-indexing." If BURST is selected, the burst cam does not automatically reset to the first shot position of the 3-round burst unless the trigger is released before the cycle is complete. If the trigger is released during the burst, and the 3-round cycle is interrupted, the next pull of the trigger fires the rounds remaining in the interrupted cycle. You can grab the PDF version of that manual at URL: https://www.tbs.usmc.mil/Pages/Downloads/Student%20Handouts/Weapons/B2200%20Weapons%20Handling%20and%20Safety.pdf (if the list mailer mangles this link, reassemble it with copy/paste) Michael A. Hobson email: [EMAIL PROTECTED] (310) 344-3585 (cell) ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] Re: 3 round burst
Not all weapons fire like that. Burst Mode on the M16A2 fires 3 rounds when you pull the trigger. Then fires another 3 rounds when you pull the trigger again. http://usmilitary.about.com/od/weapons/l/blm16a2.htm burst control device, that limits the number of rounds fired in the automatic mode to three per trigger pull, which increases accuracy while reducing ammunition expenditure Also that is a submachine gun not an assault rifle. r00t 3:16 CQC Gaming www.cqc-gaming.com - Original Message - From: "Tony "omega" Sergi" <[EMAIL PROTECTED]> To: Sent: Tuesday, May 10, 2005 9:35 PM Subject: RE: [hlcoders] Re: 3 round burst Exactly, which is how burst fire works in reality. When you press and hold the trigger, as long as you hold the trigger, the weapon will fire "automatically up to x shots" and then stop firing. If you let go after one shot it WILL stop firing. And reset the burst count wheel. I have an mp5 manual, no I don't own an mp5, but I bought a manual just for the sake of researching this. Here is an excerpt FROM H&K's manual (hopefully I won't get in shit for it:P) --Quote: Heckler & Hoch MP5 Submachinegun Operators Manual, page 50-51 Burst Mode - When the safety/selector lever is set on the burst firing position, the axle rotates a toothed counting wheel into position. This toothed count wheel will hold the sear out of engagement with the hammer for the total number of rounds in the burst provided the operator holds the trigger rearward long enough for all rounds to fire. After the last round of the burst is fired the sear is automatically released to engage with and hold the hammer in the cocked position. Each time the trigger is released, whether the entire b urst has been fired or not, the toothed counting wheel will automatically reset at zero to begin the full count over again. Thus, the H&K style burst device is described as having "no memory". It always provides the full burst as long as the trigger is held rearward long enough to allow all two or three rounds to fire. --End Quote Hope that clears some air here. -Original Message- From: Andre Bandarra [mailto:[EMAIL PROTECTED] Sent: May 10, 2005 8:50 PM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] Re: 3 round burst I gave a better thought about what Tony said. The solution does not work... Burst mode always fire 3 shot. Not more, not less. On his code, you would be able to fire one or two shots while using burst mode On 5/10/05, Andre Bandarra <[EMAIL PROTECTED]> wrote: I think Tony has a good point there. Plus its easy to code... -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 09/05/2005 ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
RE: [hlcoders] Re: 3 round burst
Exactly, which is how burst fire works in reality. When you press and hold the trigger, as long as you hold the trigger, the weapon will fire "automatically up to x shots" and then stop firing. If you let go after one shot it WILL stop firing. And reset the burst count wheel. I have an mp5 manual, no I don't own an mp5, but I bought a manual just for the sake of researching this. Here is an excerpt FROM H&K's manual (hopefully I won't get in shit for it:P) --Quote: Heckler & Hoch MP5 Submachinegun Operators Manual, page 50-51 Burst Mode - When the safety/selector lever is set on the burst firing position, the axle rotates a toothed counting wheel into position. This toothed count wheel will hold the sear out of engagement with the hammer for the total number of rounds in the burst provided the operator holds the trigger rearward long enough for all rounds to fire. After the last round of the burst is fired the sear is automatically released to engage with and hold the hammer in the cocked position. Each time the trigger is released, whether the entire b urst has been fired or not, the toothed counting wheel will automatically reset at zero to begin the full count over again. Thus, the H&K style burst device is described as having "no memory". It always provides the full burst as long as the trigger is held rearward long enough to allow all two or three rounds to fire. --End Quote Hope that clears some air here. -Original Message- From: Andre Bandarra [mailto:[EMAIL PROTECTED] Sent: May 10, 2005 8:50 PM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] Re: 3 round burst I gave a better thought about what Tony said. The solution does not work... Burst mode always fire 3 shot. Not more, not less. On his code, you would be able to fire one or two shots while using burst mode On 5/10/05, Andre Bandarra <[EMAIL PROTECTED]> wrote: > I think Tony has a good point there. Plus its easy to code... > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 09/05/2005 ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] Re: 3 round burst
I gave a better thought about what Tony said. The solution does not work... Burst mode always fire 3 shot. Not more, not less. On his code, you would be able to fire one or two shots while using burst mode On 5/10/05, Andre Bandarra <[EMAIL PROTECTED]> wrote: > I think Tony has a good point there. Plus its easy to code... > > On 5/10/05, bob <[EMAIL PROTECTED]> wrote: > > > > > > Thanks Again --- > > --- Robert I Chatman III > > --- www.swallowbush.com > > --- [EMAIL PROTECTED] > > --- (408) 569-4436 > > > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > [EMAIL PROTECTED] > > Sent: Monday, May 09, 2005 6:25 AM > > To: hlcoders@list.valvesoftware.com > > Subject: hlcoders digest, Vol 1 #1908 - 9 msgs > > > > Send hlcoders mailing list submissions to > > hlcoders@list.valvesoftware.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://list.valvesoftware.com/mailman/listinfo/hlcoders > > or, via email, send a message with subject or body 'help' to > > [EMAIL PROTECTED] > > > > The three round burst is not nearly as complex as you are making it. > > > > Look here : http://www.swallowbush.com/forum/viewtopic.php?t=326 > > > > By doing the code like this you don't have to worry about any of that > > shooting 3 at once drama. It always shoots 1. I actually have refined my > > code a bit more so if you want to, I can update my forum so it has the > > flagged version. I added a flag for automatic, as well as ready, to fix > > some bugs in my original code. > > > > > > ___ > > To unsubscribe, edit your list preferences, or view the list archives, > > please visit: > > http://list.valvesoftware.com/mailman/listinfo/hlcoders > > > > > ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] Re: 3 round burst
I think Tony has a good point there. Plus its easy to code... On 5/10/05, bob <[EMAIL PROTECTED]> wrote: > > > Thanks Again --- > --- Robert I Chatman III > --- www.swallowbush.com > --- [EMAIL PROTECTED] > --- (408) 569-4436 > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Monday, May 09, 2005 6:25 AM > To: hlcoders@list.valvesoftware.com > Subject: hlcoders digest, Vol 1 #1908 - 9 msgs > > Send hlcoders mailing list submissions to > hlcoders@list.valvesoftware.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://list.valvesoftware.com/mailman/listinfo/hlcoders > or, via email, send a message with subject or body 'help' to > [EMAIL PROTECTED] > > The three round burst is not nearly as complex as you are making it. > > Look here : http://www.swallowbush.com/forum/viewtopic.php?t=326 > > By doing the code like this you don't have to worry about any of that > shooting 3 at once drama. It always shoots 1. I actually have refined my > code a bit more so if you want to, I can update my forum so it has the > flagged version. I added a flag for automatic, as well as ready, to fix > some bugs in my original code. > > > ___ > To unsubscribe, edit your list preferences, or view the list archives, please > visit: > http://list.valvesoftware.com/mailman/listinfo/hlcoders > > ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
