Re: [hugin-ptx] Is this the correct donate link http://sourceforge.net/project/project_donations.php?group_id=77506
Darius Damalakas schrieb am 11.09.11 10:32: Just to double check with you guys: is this link the correct link to donate to hugin? http://sourceforge.net/project/project_donations.php?group_id=77506 Yes, that's the right link. Carl -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Can't do sterographic projection: excessive overlap detected and other problems
Thanks Bruno. It worked for me. It is also super easy and fast way of doing it. I cant believe that it can se so easy to do it :)) Thanks again. Emaad On Sat, Sep 10, 2011 at 4:14 PM, Bruno Postle brunopos...@googlemail.comwrote: Hugin only uses the 'crop factor' and 'focal length' to calculate the 'angle of view', so you can just ignore these parameters and enter 360 degrees for the angle of view directly. Hugin could be more helpful here, it should just assume any 2:1 ratio image is a 360 degree equirectangular. On 10 Sep 2011 06:43, Emad ud din Bhatt xyzt...@gmail.com wrote: Bruno, what will be lens parameters? Lens type = Equirectangular? Focal length =? crop factor =? When I load a stitched equirect into hugin and choose lens type equirectangular it shows only a very small square. On Fri, Sep 9, 2011 at 4:08 AM, Bruno Postle br...@postle.net wrote: On Thu 08-Sep-2011 at 15:51 -0700, Hadmut wrote: while trying to generate „little planet” panoramas (i.e. 360 degree, stereographic, pitch set to 90degree) I ran into several problems, I'd like to mention. I am using hugin 2011.0.0 (ubuntu). You can't create 360° stereographic images, this would require an infinitely large canvas: http://en.wikipedia.org/wiki/** Stereographic_projection http://en.wikipedia.org/wiki/Stereographic_projection - I am having a problem that is already described in the FAQ - unfortunately the FAQ's workaround doesn't work. When trying to stitch pictures into a stereographic image, I sometimes get error messages like The FAQ recommends stitching your spherical panorama to equirectangular format, you can then load this image into a new single-photo Hugin project and create whatever stereographic views you like (though don't expect these to be 360° wide). - Sometimes hugin calculates absurd large canvas sizes like 7750816 x 7598388 This isn't absurd, this is the image size you need to render the field of view you specified at full resolution. -- Bruno -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/**Hugin_FAQ http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscribe@** googlegroups.com hugin-ptx%2bunsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/** group/hugin-ptx http://groups.google.com/group/hugin-ptx -- *Emaad* www.flickr.com/emaad -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- *Emaad* www.flickr.com/emaad -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Problems with latest build, can someone please test
Hi Tduell, Its good that it worked for you :))) On Sat, Sep 10, 2011 at 11:43 AM, Terry Duell tdu...@iinet.net.au wrote: Hullo Emad, On Sat, 10 Sep 2011 15:46:36 +1000, Emad ud din Bhatt xyzt...@gmail.com wrote: Yes, Hugin freezes with Overview mode opened. It normally happens when hugin alligns and display first GL view. I have set Hugin to do nothing after allign due to this error. It seems a bug. To hide it I simply load 1 single jpg file into a new hugin project, open GL view and than hide overview mode. Now hugin GL view will open without overview mode. I have just tried your method and it worked for me. I thought I had been through all the possibilities, but apparently not. Many thanks. Cheers, -- Regards, Terry Duell -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- *Emaad* www.flickr.com/emaad -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Vertical line detector
Hi Thomas Just tried to build for Windows using MSVC2008 but get following error: -- Installing: C:/HUGINbase/hugin_build/INSTALL/FILES/bin/autooptimiser.exe CMake Error at src/tools/cmake_install.cmake:65 (FILE): file INSTALL cannot copy file C:/HUGINbase/hugin_build/src/tools/Release/autooptimiser.exe to C:/HUGINbase/hugin_build/INSTALL/FILES/bin/autooptimiser.exe. Call Stack (most recent call first): src/cmake_install.cmake:35 (INCLUDE) cmake_install.cmake:99 (INCLUDE) Project : error PRJ0019: A tool returned an error code from Performing Post-Build Event... Build log was saved at file://c:\HUGINbase\hugin_build\INSTALL.dir\Release\BuildLog.htm INSTALL - 1 error(s), 0 warning(s) My skills are inadequate to sort out how to overcome Cheers Brian -- View this message in context: http://old.nabble.com/Vertical-line-detector-tp32443091p32446851.html Sent from the hugin ptx mailing list archive at Nabble.com. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Re: Vertical line detector
On 11 Sep., 19:41, T. Modes thomas.mo...@gmx.de wrote: Hi group, the default branch contains now a vertical line detector. It tries to generate vertical control points for levelling of the pano. ... Compiles, integrates and runs here: Betriebssystem: Linux 2.6.38-11-generic-tuxonice i686 Architektur: 32 bit Freier Speicher: -1828108 kiB Hugin Version: Pre-Release 2011.3.0.4826832f8d18 Ressourcen-Pfad: /usr/local/share/hugin/xrc/ Datenpfad: /usr/local/share/hugin/data/ Libraries wxWidgets: 2.8.11.0 ... but the result seems strange to me - maybe there's an error? I fed it a pto with nine images from my stereographic fisheye. It found thre vertical lines in three different images: (command line output, same if run from hugin) $ linefind -o result.pto input.pto linefind is searching for vertical lines Working on image IMG_1050.tif Found 0 vertical lines Working on image IMG_1051.tif Found 1 vertical lines Working on image IMG_1052.tif Found 0 vertical lines Working on image IMG_1053.tif Found 1 vertical lines Working on image IMG_1054.tif Found 0 vertical lines Working on image IMG_1055.tif Found 0 vertical lines Working on image IMG_1056.tif Found 0 vertical lines Working on image IMG_1057.tif Found 1 vertical lines Working on image IMG_1058.tif Found 0 vertical lines Written output to result.pto but in the resulting pto file, result.pto, all three vertical CPs are assigned to image number zero: # control points c n0 N0 x2847.22729509834 y2096.36641460524 X2851.72865032147 Y2405.76855173728 t1 c n0 N0 x-2.47460425806207 y2128.94518372973 X-3.35545983791303 Y2407.96021470891 t1 c n0 N0 x2851.06479346968 y1874.90595527298 X2843.63811550857 Y2193.76486309095 t1 The use of negative coordinates also seems a bit strange. Am I missing something? Kay -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Vertical line detector
Am Montag, 12. September 2011 schrieb brian_ims: Hi Thomas Just tried to build for Windows using MSVC2008 but get following error: -- Installing: C:/HUGINbase/hugin_build/INSTALL/FILES/bin/autooptimiser.exe CMake Error at src/tools/cmake_install.cmake:65 (FILE): file INSTALL cannot copy file C:/HUGINbase/hugin_build/src/tools/Release/autooptimiser.exe to C:/HUGINbase/hugin_build/INSTALL/FILES/bin/autooptimiser.exe. Call Stack (most recent call first): src/cmake_install.cmake:35 (INCLUDE) cmake_install.cmake:99 (INCLUDE) Project : error PRJ0019: A tool returned an error code from Performing Post-Build Event... Build log was saved at file://c:\HUGINbase\hugin_build\INSTALL.dir\Release\BuildLog.htm INSTALL - 1 error(s), 0 warning(s) My skills are inadequate to sort out how to overcome I do not have windows, but maybe: there is no such file as C:/HUGINbase/hugin_build/src/tools/Release/autooptimiser.exe or there exists already the file C:/HUGINbase/hugin_build/INSTALL/FILES/bin/autooptimiser.exe and you don't have permission to overwrite Cheers Brian Kornel signature.asc Description: This is a digitally signed message part.
Re: [hugin-ptx] Vertical line detector
Kornel Benko wrote: Am Montag, 12. September 2011 schrieb brian_ims: Hi Thomas Just tried to build for Windows using MSVC2008 but get following error: -- Installing: C:/HUGINbase/hugin_build/INSTALL/FILES/bin/autooptimiser.exe CMake Error at src/tools/cmake_install.cmake:65 (FILE): file INSTALL cannot copy file C:/HUGINbase/hugin_build/src/tools/Release/autooptimiser.exe to C:/HUGINbase/hugin_build/INSTALL/FILES/bin/autooptimiser.exe. Call Stack (most recent call first): src/cmake_install.cmake:35 (INCLUDE) cmake_install.cmake:99 (INCLUDE) Project : error PRJ0019: A tool returned an error code from Performing Post-Build Event... Build log was saved at file://c:\HUGINbase\hugin_build\INSTALL.dir\Release\BuildLog.htm INSTALL - 1 error(s), 0 warning(s) My skills are inadequate to sort out how to overcome I do not have windows, but maybe: there is no such file as C:/HUGINbase/hugin_build/src/tools/Release/autooptimiser.exe or there exists already the file C:/HUGINbase/hugin_build/INSTALL/FILES/bin/autooptimiser.exe and you don't have permission to overwrite Cheers Brian Kornel Thanks Kornel For some reason cannot overwrite autooptimiser.exe Cheers brian -- View this message in context: http://old.nabble.com/Vertical-line-detector-tp32443091p32447923.html Sent from the hugin ptx mailing list archive at Nabble.com. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Re: Vertical line detector
@Kay but in the resulting pto file, result.pto, all three vertical CPs are assigned to image number zero: # control points c n0 N0 x2847.22729509834 y2096.36641460524 X2851.72865032147 Y2405.76855173728 t1 c n0 N0 x-2.47460425806207 y2128.94518372973 X-3.35545983791303 Y2407.96021470891 t1 c n0 N0 x2851.06479346968 y1874.90595527298 X2843.63811550857 Y2193.76486309095 t1 The use of negative coordinates also seems a bit strange. Both issues are fixed in default branch. @brian_ims Kornel is on the right way. Maybe autooptimiser is still running. Check taskmanager and kill autooptimiser.exe or reboot your system. Thomas -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
