Re: [hugin-ptx] test build for Lion Mountain Lion
Ciao Matthieu. I wanted to try your build, but the link in your emails below give me an ERREUR 404 - Document non trouvé page and I cannot download your build. Did you remove the files from your webspace? Greetings from Switzerland, Habi On 07.05.2013, at 09:05, ___matthieu___ matthieu.des...@gmail.com wrote: Hello, I have built a new version based on the 2013.0 branch that now has Python support for 10.6 and with wxPython embedded, which means that the plugin Crop Control Points works. It is here : http://matthieu.desile.free.fr/hugin/Hugin-Release-2013.0.0.6316-68a477c87b0a-10.6.dmg It is a 64bits only build, it works on 10.6 and 10.8. If anyone see any problem, please do not hesitate to report it to me. The only problems I see are : - on 10.6, you have an error if you try to run hugin_python from the command line and import hsi; you can nevertheless import wx (but it's a small consolation) - you cannot run the python plugins if you launch Hugin from the dmg. These problems do not affect the way hugin works, they are only small side problems (for me) Cheers, Matthieu -- -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx --- You received this message because you are subscribed to the Google Groups hugin and other free panoramic software group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx --- You received this message because you are subscribed to the Google Groups hugin and other free panoramic software group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: [hugin-ptx] test build for Lion Mountain Lion
Sorry for the too fast email. I've seen that I can just go to http://matthieu.desile.free.fr/hugin/ and download the .dmg from there. Will test it now :) Habi On 15.05.2013, at 23:36, David Haberthür david.haberth...@gmail.com wrote: Ciao Matthieu. I wanted to try your build, but the link in your emails below give me an ERREUR 404 - Document non trouvé page and I cannot download your build. Did you remove the files from your webspace? Greetings from Switzerland, Habi On 07.05.2013, at 09:05, ___matthieu___ matthieu.des...@gmail.com wrote: Hello, I have built a new version based on the 2013.0 branch that now has Python support for 10.6 and with wxPython embedded, which means that the plugin Crop Control Points works. It is here : http://matthieu.desile.free.fr/hugin/Hugin-Release-2013.0.0.6316-68a477c87b0a-10.6.dmg It is a 64bits only build, it works on 10.6 and 10.8. If anyone see any problem, please do not hesitate to report it to me. The only problems I see are : - on 10.6, you have an error if you try to run hugin_python from the command line and import hsi; you can nevertheless import wx (but it's a small consolation) - you cannot run the python plugins if you launch Hugin from the dmg. These problems do not affect the way hugin works, they are only small side problems (for me) Cheers, Matthieu -- -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx --- You received this message because you are subscribed to the Google Groups hugin and other free panoramic software group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx --- You received this message because you are subscribed to the Google Groups hugin and other free panoramic software group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: [hugin-ptx] test build for Lion Mountain Lion
Matthieu, to answer the question about starting hugin … I mostly start hugin without a project. That is I start hugin, load images, do align, and create pano. So, as soon as I start hugin I'm getting the triangle problem. On 2013-05-12, at 6:27 PM, ___matthieu___ matthieu.des...@gmail.com wrote: Hello Donald, On 11 mai, 23:15, Donald Johnston dgjohns...@accesscomm.ca wrote: Matthieu … I just tested this level and it works well for me except for the following two points. 1. when I start Hugin there is a whitish-grey rectangular box sitting in front of the Tip of the Day window. I can just see the top of that window enough that I can drag it out from under the rectangle and read what it says. When I exit the tips window the rectangle also disappears. I can not reproduce this problem; I remember having it once but I am now unable to reproduce it. Does it happen all the time ? Does the problem appear on project with errors, or with projects containing a lot of images ? Does it happen if you launch Hugin without opening a project ? 2. perhaps you've seen the previous set of emails about --linearmatch that Thomas was helping me with. The concensus is that the default Control Points Detector under Preferences should be called when using the Align button on the Assistant tab. It sounds like it works on Thomas' machine (not sure what OS he is running) but isn't working on your build on my Mac. Does this work on you machine? I had not read this thread; I will look into it. Cheers, Matthieu -- -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx --- You received this message because you are subscribed to the Google Groups hugin and other free panoramic software group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx --- You received this message because you are subscribed to the Google Groups hugin and other free panoramic software group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
