Re: Retiring after 43+ years with IBM
Good luck Frank.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: 10007 bpxoinit
wlm default port.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Any SMF Cut for MVS Commands cancel
We have had a situation where somebody cancelled a job which caused IMS left in middle and later issue now we tried finding who issued it however it got just INTERNAL (Generally something coming from console) anybody know any other pin to go back to root who issued it..another thing I could notice is command seems to be coming thru netview.. 12114 14:46:37.86 INTERNAL 0290 CANCEL STLD3VDC,A=025B 12114 14:46:37.90 STC12398 0290 CANCEL STLD3VDC,A=025B STC12398 = Netview task.. Now SMF30 doesn't contain any info neither 26 ..Syslog doesn't got anything Netview log got only command as pasted here...any call? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: Any SMF Cut for MVS Commands cancel
job got S222 from type30 however that doesn't give answer to me who did it.. Nothing in netlog.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: Any SMF Cut for MVS Commands cancel
Thanks processed with mxg/sas smf type80 doesn't contain information unfortunately.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: Version Query for Installed Product
How about generate list of FMID's and check with what is installed..ofcourse can have some third party FMID's as well..however this is what I could narrow down otherwise..IFAPRDxx and SMF not going to help as you looking offline prod. http://www-03.ibm.com/systems/z/os/zos/support/servicetest/fmids.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Jobname for DFHSM Requests
***Suggestion Please*** We work in 12 way sysplex/hsmplex and sometime following a bad tape hsm requests get build up now before we do tape replace with alternate These all recall request should be killed which we get from HSEND Q REQ and then start killing them on basis of owner id .However as far as it's under the TSO owner or some single job owner request can easily be understood from where it coming to cancel However at certain situation when there are multiple/number of jobs running under the same Owner(for example under CA7/TWS) we stuck since we know the Owner id but doesn't know the jobname associated with recall request so that we know if we kill some request which job will go down or which job we should cancel before cancelling recall request.. Any idea? any block within hsm address space to refer back to extract out jobname ..could not see in DATA Area manual of hsm.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
SMF Records
Does anybody give me idea how can i copy only the smf records from given dataset which does contain a particular string(dataset name) ..well while dumping using ifasmfdp i used (0:255) now need to figure out the dataset name I am looking is associated with which smf records..since as i thought it may be 14/15 it does however want to know what other records are associated with it.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: DFSMS and HFS/ZFS Datasets.
2 cents should have seperate storage group..it's going to easier life with the issues/problem comes and also defining various options which not needed with basic file system... Look in DFSMS : Implementing System-Managed storage 7.9 - Defining SMS Construct for HFS Data.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Jes2 held output class
Lim, I appreciate if you could post complete JCL ..Do you have any SYSOUT statement with Hold? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Jes2 held output class
also let me know output of $D O J'SARINIT' -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Jes2 held output class
Hi Lim, I believe at your environment Outclass Q has been defined for the SAR to accumulate the output and keep in database and when you running a job with msgclass=q it get written in sar however SAR stc might not have authority to purge the job and that's where it stay in hold class...could you check the following. 1. SAR Task is up and accumulating jobs from SDSF. 2. Any message printed in syslog if nothing is seen please on $t debug=y and rerun the job and see if SAR capture it with any ICH408I Message in syslog. Please let me know how it goes..thanks,Ravi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Command JES2 $AJ
As long as i believe it's not normal However has then been tried to recreate is it something happening in your environment with the release command for JES2. $AJ command is for releasing the job which are in hold from operator or auto-operator via commands.. Since you say job has already been in Execution queue it means not been on hold and whether it's a WLM INIT or JES manage INIT if job has been allocated to INIT it will not swap to another unless until intentionally ..Did you check in Syslog if you get some hint. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Fairwell to a Friend
He will be missed..Truly been legend in contribution and his source code been outstanding...will miss him.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Jes2 held output class
can you try $DOUTCLASS(Q) and post output here.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Jes2 held output class
so you see JES has got WRITE,WRITE for normal abnormal OUTDISP parm.Now please go to JES2 command and reference guide and look for $TOUTCLASS and set it as per your need...Thanks,Ravi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Jes2 held output class
sorry ,Guess I misunderstood your question .Correct me now ..Do you see some job with msgclass=q in Hold output queue? can you post the job output Please make sure if you are running in sysplex every system in JESPLEX got same setting since I am doubting if your job is routed to lpar where outlcass=Q got different outdisp.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CLUSTER - alter Command error
Do alter on Data and Index portion no on Cluster entry You can get idea why if you do Listcat on the entry... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: JES2 SPOOL QUESTION
certainly wanted to double confirm you did put correct Spool volume serial ..sometime finger get funny...we checked with $dspl and then put any volume $D JQ,SPOOL=(V=SPOOL1) ... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Allocation Conflict with Job
I did see this number of times...answer reside in jcl reference with DISP description. When any step of a job requests exclusive control of a data set (through DISP=NEW, DISP=MOD, or DISP=OLD), the system converts all requests for shared control of that data set within that job (DISP=SHR) to requests for exclusive control. That is the reason we get exclusive hold with even DISP=SHR.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: zFS Data Set 4G
Need dataclass extended addressibility.. RETURN CODE 140 Explanation: Inconsistent or conflicting arguments were provided. 110 Explanation: Either of the following problems occurred: o The calculation of space required for a VSAM data set resulted in a high-allocated RBA greater than 4 GB, and the data set is not an extended addressability data set. This might occur either during the initial definition or during an attempt to extend the data set. o The number of control intervals or control areas required for the data set exceeded 4 GB. Programmer Response: Define the data set with a smaller space allocation request. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: zFS Data Set 4G
can you check the dataclass for the dataset being allocated ? please specify the dataclass which make dataset eligible for Extended addressibility... RETURN CODE 140 Explanation: Inconsistent or conflicting arguments were provided. 110 Explanation: Either of the following problems occurred: o The calculation of space required for a VSAM data set resulted in a high-allocated RBA greater than 4 GB, and the data set is not an extended addressability data set. This might occur either during the initial definition or during an attempt to extend the data set. o The number of control intervals or control areas required for the data set exceeded 4 GB. Programmer Response: Define the data set with a smaller space allocation request. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Orlando SHARE Presentation - Resume Writing
I attended Joe session last time and it been useful indeed..Thanks Joe -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CORRUPT PDS - I/O ERROR
I would like to know what really other message you get with I/O error..any more informatory..go with the PDS80 or PDSMAN and see if with the scan members or fix you can see more information about the ttoc's etc and it also give you report which is more descriptory...I am not sure if it is availablein your environment however remember have had one on cbttape.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Packet Trace by specific jobname
Not sure if you can do it for a particular job however indeed yes for a particular IP address or Port it's possible..if you need procedure..contact me offline..thanks -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Not able to login to OMVS
did you check if all files are mounted and on correct mount point? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Clobbered SMPSCDS
Do you have PDSMAN? or PDSE tool that's pretty good on it.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: FB to VB can DFsort do this?
CONVERT option.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Amdahl training was RE: more on startio...
I did have sessions with Technowledge and can say they been pretty good with doc reference and trainer been knowledgable ..back in 2004 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RES: BatchPipes/MVS
we use it very heavily as well on 11 way sysplex.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: can limit JES2 RJE work?
I am not sure the scope of your question is it just limited to Printer or extend to Remote node job submission and getting output... Certainly RACF may have option for it ..however 1 of the inscope task with printers would be to limit the Lower and Higher records limit with Limit parameter in Printer..as below.. $DPRT78 $HASP603 PRT78 $HASP603 PRT78 UNIT=,STATUS=DRAINED,BURST=NO,CKPTLINE=0, $HASP603 CKPTMODE=PAGE,CKPTPAGE=100,CKPTSEC=0, $HASP603 CREATOR=,DEVFCB=,DEVFLASH=,FCB=SB08, $HASP603 FORMS=(STD,,,),FSS=SARFVC78,HONORTRC=YES, $HASP603 JOBNAME=,LASTFORM=STD,LIMIT=(0,*), $HASP603 COPYMARK=DATASET,MARK=NO,MODE=FSS, $HASP603 NEWPAGE=DEFAULT,NPRO=300,PAUSE=NO,PLIM=(0,*), $HASP603 PRESELCT=YES,PRMODE=(LINE),QUEUE=G,RANGE=(J1, $HASP603 99),ROUTECDE=(LOCAL),SEP=NO, $HASP603 SEPCHARS=DEFAULT,SEPDS=NO,SETUP=HALT,SPACE=, $HASP603 TRACE=NO,TRANS=DEFAULT,TRKCELL=NO,UCS=GY15, $HASP603 UCSVERFY=NO,VOLUME=(,,,),WRITER=, $HASP603 WS=(PRM,Q,R/),FSAROLTR=YES LIMIT Specifies the lower and upper record limits for jobs that this device will process. A limit of (0,*) means that this device selects all output. This keyword only applies for local and remote printers and punches and SYSOUT transmitters. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
nothing so far in June?
No questions in june month? or something wrong with my profile? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: nothing so far in June?
posting to my question : as soon as i put a message i started seeing june entries..thanks -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Question about Dynamic allocate
What kind of dataset it is? Try looking at the ICF Catalog record via processing SMF Type 60-65 ...MXG/SAS if you have can be handy in generating reports..also on the basis of type 15... snapshot of type 15 Record type 15 is written for non-VSAM direct access, or VIO tape data sets that are defined by DD statements or dynamic allocation and opened for OUTPUT, UPDAT, INOUT, or OUTIN processing by problem programs. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Decentralized Install Work
This is what and how my current mainframe support shop working and my personal opinion it just suck ..no good coordination,down the line broken connection with peers business,dimnishing skills and environment knowledge...overall bad idea... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: How to release PDS by Partial Release = YI
what was the allocation of space while allocating the PDS and once you came out of the PDS using F3? YI indicate it should be released with space management cycle run and also when close is issued against the dataset.. I assume by mistake or by other job/user dataset was not opened...sometime other session is active and we don't realize it.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Copying tapes with 256K blocksizes
what type of device output going to? SMS routines also interface with blocksize...paste the error msg.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Copying tapes with 256K blocksizes
Fred,AFIK copycat should be able to it however did you try basic ibm utilities without going to cbt tape org...? iebgener,adrdssu..Trying to understand completely what comes up if you copy over one tape to another with more than 256 blk.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ISPF error
It's being generated following either SPFLOG dataset...go over to your TSO Address space ..and see if there's any error...it can be following many reason..common are wrong dataset characterstic,not catalog,doesn't exist etc..however it will be possible to trace down following running bit of trace...check if you see some common msg.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Transmission files
I use below method.. Method adopted 1. Terse the dataset //STEP1 EXEC PGM=TRSMAIN,PARM='PACK' //SYSPRINT DD SYSOUT=* //INFILEDD DISP=SHR,DSN=.INFILE //OUTFILE DD DSN=.TERSE, // DISP=(,CATLG,DELETE),UNIT=3390, // SPACE=(CYL,(2,5),RLSE), // DCB=(RECFM=FB,LRECL=1024,BLKSIZE=0) //SYSIN DD DUMMY 2. Transfer the dataset to PC as a Binary transfer.(Via ind$file or ftp) 3. Upload the dataset in to the dataset which is having RECFM=FB,LRECL=1024,BLKSIZE=0 4. Use Unterse job to unterse //STEP1 EXEC PGM=TRSMAIN,PARM='UNPACK' //SYSPRINT DD SYSOUT=* //INFILEDD DISP=SHR,DSN=XXX.TERSE //OUTFILE DD DSN=XXX.INFILE,DISP=(,CATLG), // SPACE=(CYL,(6,4,100),RLSE),DCB=(*.INFILE) //* // -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RMF rec 74 subtype 7 FCD
Did a simple Google trick .. http://www.pacsys.com/smf/smf74_subtype7.htm and it explain SMF747CO 4 binary Offset to connector data section. Purpose: Record type 74 has several subtypes. Subtype 7 — FICON Director Statistics FCD connector data section : Contains configuration data for additional control units. hope this helps.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RMF rec 74 subtype 7 FCD
SMF747PO--- /*OFFSET TO PORT*/ SMF747CO--- /*OFFSET TO CONNECTOR*/ -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: moving extends for allocated VSAM linear data set
Do you have any third party tool? to do so... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: AC(authorization code) value change.
AC=Access code does come with the linkedit step..however i certainly suggest you to cross check your apf list and joblib/steplib again and see from where the load module is being picked ..it's showing to me load module being picked is not apf authorize... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: AC(authorization code) value change.
Ifrom name dsnload it looks to me db2 ... Cud you send jcl of your stc/ job and output of d prog,Apf Sent from my iPhone On 11-Apr-2011, at 5:13 PM, jagadishan perumal jagadish...@gmail.com wrote: Ravi, I have added all the WLM Load modules to APF library On Mon, Apr 11, 2011 at 2:40 PM, Ravi Gaur gaur.ravi2...@gmail.com wrote: AC=Access code does come with the linkedit step..however i certainly suggest you to cross check your apf list and joblib/steplib again and see from where the load module is being picked ..it's showing to me load module being picked is not apf authorize... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TCP/NJE Outgoing Activity and SMF
Does below info help? A.3.8.1 Accounting Records (SMF) System management facilities (SMF) is a function of MVS that allows the collection and recording of various types of system and job-related information. This information is recorded in the form of a number of different records, which are numbered. Installations can process the SMF records with any number of application programs to analyze the data, produce reports, etc.Two SMF records (types 26 and 57) are recorded by JES3 that contain network-related information. The type 26 record is produced at job termination time and contains various job summary information. The type 57 record is produced for each transmitted job (or SYSOUT) after successful transmission and contains summary and resource usage information related to the network processing of the job.There are no records produced in JES3 that record information of a network management nature. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: SMPE apply RSU with SMPE changes
I know number of people have replied to your post however could not hold myself would like to reiterate NEVER apply maintenance to your running system libraries... It's a well defined procedure to clone your sysres,hfs or any other program products packs to new packs and mount the new HFS files under the /service mount point from running system and make sure all DDDEF in smpe are pointing towards new pack datasets ..carefully check against your apply check steps and see which libraries it is pointing.. Indeed it will cause system outage/subsystem failure if you apply on running system .. I would also suggest to cross check your output of jobs by senior peer so that you don't put yourself in trouble later...it's better to get help if not sure than you never get chance again... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: SMPE apply RSU with SMPE changes
to have anwer for manual z/OS planning and installation manual Appendix D : Making a copy of your software system(cloning) and z/OS Unix system services planning guide having index of Installing services in to HFS should help here.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: *CNZ4201E OPERLOG HAS FAILED
Please hit below commands and put output.. ( D EMCS ) ( D C,KEY=OPERLOG ) ( D GRS,RES=(SYSZCNZ,*) ) Also check if there has been any Plex defined system Ipled for upgrade if yes with what version... I see no Operlog structure in your output..since not connected... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ADRDSSU issue
use this and let me know what you get.. //VFRVOLSER EXEC PGM=ADRDSSU,PARM='LINECNT=',REGION=4M //SYSPRINT DD SYSOUT=* //INVOL1DD VOL=SER=FRVOLSER,UNIT=3390,DISP=SHR //OUTVOL1 DD VOL=SER=TOVOLSER,UNIT=3390,DISP=SHR //SYSIN DD * COPY DATASET(INCLUDE(**) - EXCLUDE(SYS1.VTOCIX.** - SYS1.VVDS.** - SYS1.DUMP.** - SYS1.MAN%.** - SYSMCAT.** - SYSUCAT.** - OMVS.**- PAGE.** - MVSSMP*.** ) - BY((DSORG NE VSAM), - (DSORG NE HFS ), - (DSORG NE ZFS ))) - LOGINDDNAME(INVOL1) - ALLDATA(*) - ALLEXCP - CANCELERROR - BYPASSACS(**) - FORCE - OUTDDNAME( - OUTVOL1 - ) - PERCENTUTILIZED( - 100 - ) - PROCESS(SYS1) - REPLACE - SHARE - SPHERE - TGTALLOC(SOURCE) - TOLERATE(ENQFAILURE) - ADMINISTRATOR //* -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ADRDSSU issue
aah,forgot remove by condition so job can be .. //VFRVOLSER EXEC PGM=ADRDSSU,REGION=4M,PARM='TYPRUN=NORUN' //SYSPRINT DD SYSOUT=* //INVOL1DD VOL=SER=FRVOLSER,UNIT=3390,DISP=SHR //OUTVOL1 DD VOL=SER=TOVOLSER,UNIT=3390,DISP=SHR //SYSIN DD * COPY DATASET(INCLUDE(**) - EXCLUDE(SYS1.VTOCIX.** - SYS1.VVDS.** - SYSUCAT.** - OMVS.**- MVSSMP*.** - )) - LOGINDDNAME(INVOL1) - ALLDATA(*) - ALLEXCP - CANCELERROR - BYPASSACS(**) - FORCE - NULLMGMTCLAS - NULLSTORCLAS - OUTDDNAME(OUTVOL1) - PERCENTUTILIZED(100) - PROCESS(SYS1) - REPLACE - SHARE - SPHERE - TGTALLOC(SOURCE) - TOLERATE(ENQFAILURE) - ADMINISTRATOR //* -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Status Difference Between JES2 and SDSF
It can be what you saying and I see some improvement is happening with z/OS 1.12.. share remarks (boston) --- z/OS 1.12 JES2 added support to place the SPOOL and Checkpoint data sets in EAS storage (above the 64K cylinder line). It also added a new SSI to retrieve printer status information. There were also a number of serviceability(RAS) changes that will be discussed. New in this release is an SSI (83 with SSOB extension IAZSSJD) to obtain information on local and remote printers. This information is available on z/OS 1.12 from any z/OS 1.11 MAS member and later. Only local and remote printer are currently supported via the SSI (though the IAZSSJVD data area does define additional devices). The information is provided via a data gather code that was shipped in z/OS 1.11. To fully support requests from z/OS 1.12, you must apply the data gatherer APARs OA31703 and OA32712 on your z/OS 1.11 system. These APARs are a pre-req for the JES2 toleration APAR OA28532. The initiator subfunction of the JES property SSI was enhanced to support requesting information from other members. This requires the target member to be running z/OS 1.12. SYSOUT ENF processing was enhanced to support requesting ENFs for data sets select by SAPI. This is useful if a SAPI application is requesting SYSOUT information and returning it for later processing but still wants to track the status of the data set. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Restoring DFSMShsm migrated data set without active DFHSM?
I have no idea why you got this requirement anyway it's a dfhsm recovery scenario and look like needed help from ibm.you might be needed to enable patches etc which are recommended by IBM...Like below manual does have some dfhsm recovery scenario.. http://publib.boulder.ibm.com/infocenter/zos/v1r9/index.jsp? topic=/com.ibm.zos.r9.idas200/hr1024.htm On the other hand question goes did you try with the recover option from backup since it's a ml2 there should be a backup copy created as well and if so look in the above manual there's a way to recover dataset from the dfdss backup...interesting question nevertheless. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: We can't delete a cataloged dataset
Please run the DELETE NOSCRATCH in batch job and post the output...I see no reason why it should not delete dataset from catalog when you specify noscratch... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: SMP/E CSI record layout
Why you looking for the record layout of Target CSI ? Just bit curious .. anyway other question I have is in what situation you see hex 070300 before zone name since I did print of records for target zone and they all appear to have 010300 ...thanks,Ravi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
NJE Nodes communication b/w RACF CA-Top secret
Got a question ...we have nodes define in NJE over TCPIP both with JES2 however one of the node is with security manager as RACF while other as CA Top secret and hence we get following if job is routed from RACF defined node to CA-Top secret defined node. 18.34.25 JOB72383 MONDAY,03 JAN 2011 18.34.25 JOB72383 TSS7145E Accessor ID NBKE Not Defined to Security $HASP106 JOB DELETED BY JES2 OR CANCELLED BY OPERATOR BEFORE EXECUTION Do we have some document reference which says it's not possible to run jobs between incompatible security manager nodes? or any manual which can help to customize it? Should raise it with IBM as a question? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Automatic SVCDUMP Dataset space allocation -Query
Today when one of the team(batch) pointed me out that vendor has come with saying that they don't have complete dump and Batch requested to make the changes in the automatic dump capturing process I had to go back again for process and could not figure out where and how the space is getting allocated for these datasets... Here's my observation while doing investigation :- 1. Status of our dump dataset IEE852I 02.13.47 SYS1.DUMP STATUS 026 SYS1.DUMP DATA SETS AVAILABLE=002 AND FULL=000 CAPTURED DUMPS=, SPACE USED=M, SPACE FREE=5000M AUTOMATIC ALLOCATION IS: ACTIVE AVAILABLE SMS CLASSES: (DATA=DCEXTSP,MGMT=,STOR=) NO DASD VOLUMES DEFINED NAME=SYS7A.DUMP.SSYSNAME..DLDATE..TLTIME..NSEQ EXAMPLE=SYS7A.DUMP.S1X01.D100714.T021347.N0 SYS1.DUMP AVAILABLE DASD DATA SETS : 10-11 Shows the dataclass=DCEXTSP which I thought responsible for allocating Primary and secondary space ..However that's not true since these are not defined in our environment. DATA CLASS LIST Entries 1-1 of 1 Data Columns 6-11 of 47 CDS Name : ACTIVE Enter Line Operators below: LINE DATACLAS AVGSPACE SPACE OPERATOR NAME KEYLEN KEYOFF AVGREC VALUE PRIMARY SECONDARY ---(1) --(2)--- -(6)-- -(7)-- -(8)-- -(9)- -(10)-- -- (11)--- DCEXTDMP--- - - - -- -- -- -- BOTTOM OF DATA -- -- 2. Now I tried with the test console dump for one test job and below is output and screen shot.. IEF196I IGD17070I DATA SET SYS7A.DUMP.S1X01.D100714.T004238.N4 IEF196I ALLOCATED SUCCESSFULLY WITH 4 STRIPE(S). IEF196I IGD101I SMS ALLOCATED TO DDNAME (SYS7) IEF196I DSN (SYS7A.DUMP.S1X01.D100714.T004238.N4 ) IEF196I STORCLAS (PRD10202) MGMTCLAS (PRD) DATACLAS (DCEXTDMP) IEF196I VOL SER NOS= 1X0DM0,1X0DM1,1X0DM2,1X0DM3 IEF196I IGD104I SYS7A.DUMP.S1X01.D100714.T004238.N4 RETAINED, IEF196I DDNAME=SYS7 IEA611I COMPLETE DUMP ON SYS7A.DUMP.S1X01.D100714.T004238.N4 250 DUMPID=004 REQUESTED BY JOB (*MASTER*) NONVSAM --- SYS7A.DUMP.S1X01.D100714.T013548.N5 IN-CAT --- SYS8C.UCAT1X.SYS02 HISTORY DATASET-OWNER-(NULL) CREATION2010.195 RELEASE2 EXPIRATION--.000 ACCOUNT-INFO--- (NULL) SMSDATA STORAGECLASS ---PRD10202 MANAGEMENTCLASS-- PRD DATACLASS --DCEXTDMP LBACKUP ---.000. VOLUMES VOLSER1X0DM2 DEVTYPE--X'3010200F' FSEQN-- VOLSER1X0DM3 DEVTYPE--X'3010200F' FSEQN-- VOLSER1X0DM0 DEVTYPE--X'3010200F' FSEQN-- VOLSER1X0DM1 DEVTYPE--X'3010200F' FSEQN-- ASSOCIATIONS (NULL) ATTRIBUTES STRIPE-COUNT---4 Data Set Name . . . . : SYS7A.DUMP.S1X01.D100714.T015331.N6 General Data Current Allocation Management class . . : PRD Allocated blocks . : 12,796 Storage class . . . : PRD10202Allocated extents . : 4 Volume serial . . . : 1X0DM2 + Device type . . . . : 3390 Data class . . . . . : DCEXTDMP Current Utilization Organization . . . : PS Used blocks . . . . : 12,796 Record format . . . : FBS Used extents . . . : 4 Record length . . . : 4160 Block size . . . . : 24960 1st extent blocks . : 3200 Secondary blocks . : 7756 Data set name type : EXTENDEDSMS Compressible : NO Creation date . . . : 2010/07/14 Referenced date . . : 2010/07/14 Expiration date . . : ***None*** No where I could find any answer how the space is defined for the SYS7A.DUMP.** datasets.. I presumed since dataclass=dcextdmp point to storage group SGDUMP which is having 4 volume defined ..my SVCDUMP dataset would try to extend to all these 4 volumes and acquire all space ..However these all are 3390-3 model and I see our process of clearing the dump dataset is also pretty fast to avoid situation where volumes are filled as soon as other svcdump request kicked on.. Can someone point me out to the manual/redbook which talk about process of space allocation here... Also fyi ..i have seen for the message which says PARTIAL complete could not see that either.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Update Notice area of Broadcast dataset
Don't know but SEND 'Text',SAVE command doesn't seems to be working for me...is there somekind of parameter/option should be enabled for a particular profile? any idea -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
