Re: ADR938E - PROBLEM WITH FASTREPLICATION
Gerhard, No, both volumes are on the same controller. I found that the target address was a 3390-9 instead of 3390-27. The error message is very misleading. Thanks. From: Gerhard Weisshaar gerhard_weissh...@compuserve.com To: IBM-MAIN@bama.ua.edu Sent: Monday, 16 April 2012 3:20 PM Subject: Re: ADR938E - PROBLEM WITH FASTREPLICATION Are the two volumes RXTRS1 and @@883C part of the same SFI (the same DASD box)? If not, then FlashCopy cannot be used for the requested operation. Gerhard Am 16.04.2012 20:10, schrieb Pommier, Rex R.: Is that all you got? The messages manual says that there should have been a reason code with the ADR918I message. Rex -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of John Dawes Sent: Saturday, April 14, 2012 6:18 PM To: IBM-MAIN@bama.ua.edu Subject: ADR938E - PROBLEM WITH FASTREPLICATION G'Day, I am trying to figure out this problem. I checked the error message but I was unable to figure out what I should do or why the problem occurred. ADR918I (052)-DDTFP(01), FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR938E (052)-DDTFP(01), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR006I (052)-STEND(02), 2012.105 02:34:11 EXECUTION ENDS Below is my jcl: //STEP1 EXEC PGM=ADRDSSU,REGION=4096K,TIME=1440 //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY FULL INDYNAM(RXTRS1) OUTDYNAM(@@883C) ALLE ALLD(*) - FASTREPLICATION(REQUIRED) FCNOCOPY DUMPCONDITIONING ADMIN PURGE Any suggestions? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN The information contained in this e-mail may contain confidential and/or privileged information and is intended for the sole use of the intended recipient. If you are not the intended recipient, you are hereby notified that any unauthorized use, disclosure, distribution or copying of this communication is strictly prohibited and that you will be held responsible for any such unauthorized activity, including liability for any resulting damages. As appropriate, such incident(s) may also be reported to law enforcement. If you received this e-mail in error, please reply to sender and destroy or delete the message and any attachments. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: ADR938E - PROBLEM WITH FASTREPLICATION
Rex, My apologies, I truncated the message. Here it is in its entirety: ADR006I (052)-STEND(01), 2012.106 08:41:32 EXECUTION BEGINS ADR918I (052)-DDTFP(01), FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1, RETURN CODE 1 ADR938E (052)-DDTFP(01), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR006I (052)-STEND(02), 2012.106 08:41:32 EXECUTION ENDS ADR013I (052)-CLTSK(01), 2012.106 08:41:32 TASK COMPLETED WITH RETURN CODE 0008 From: Pommier, Rex R. rex.pomm...@cnasurety.com To: IBM-MAIN@bama.ua.edu Sent: Monday, 16 April 2012 2:10 PM Subject: Re: ADR938E - PROBLEM WITH FASTREPLICATION Is that all you got? The messages manual says that there should have been a reason code with the ADR918I message. Rex -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of John Dawes Sent: Saturday, April 14, 2012 6:18 PM To: IBM-MAIN@bama.ua.edu Subject: ADR938E - PROBLEM WITH FASTREPLICATION G'Day, I am trying to figure out this problem. I checked the error message but I was unable to figure out what I should do or why the problem occurred. ADR918I (052)-DDTFP(01), FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR938E (052)-DDTFP(01), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR006I (052)-STEND(02), 2012.105 02:34:11 EXECUTION ENDS Below is my jcl: //STEP1 EXEC PGM=ADRDSSU,REGION=4096K,TIME=1440 //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY FULL INDYNAM(RXTRS1) OUTDYNAM(@@883C) ALLE ALLD(*) - FASTREPLICATION(REQUIRED) FCNOCOPY DUMPCONDITIONING ADMIN PURGE Any suggestions? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN The information contained in this e-mail may contain confidential and/or privileged information and is intended for the sole use of the intended recipient. If you are not the intended recipient, you are hereby notified that any unauthorized use, disclosure, distribution or copying of this communication is strictly prohibited and that you will be held responsible for any such unauthorized activity, including liability for any resulting damages. As appropriate, such incident(s) may also be reported to law enforcement. If you received this e-mail in error, please reply to sender and destroy or delete the message and any attachments. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: ADR938E - PROBLEM WITH FASTREPLICATION
Hmm, the RC=1 is odd, especially seeing that you found the problem 3390-27--3390-9. I would have expected it to have sent back a return code 2 indicating a problem on the target. I wonder what would have happened if you had changed it to FR(PREF) instead of FR(REQ). I know it would have tried to copy everything because you wouldn't have been able to do the FCNC parm, but it might have pointed out the size mismatch more quickly. In any case, glad you found the problem. Rex -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of John Dawes Sent: Tuesday, April 17, 2012 10:36 AM To: IBM-MAIN@bama.ua.edu Subject: Re: ADR938E - PROBLEM WITH FASTREPLICATION Rex, My apologies, I truncated the message. Here it is in its entirety: ADR006I (052)-STEND(01), 2012.106 08:41:32 EXECUTION BEGINS ADR918I (052)-DDTFP(01), FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1, RETURN CODE 1 ADR938E (052)-DDTFP(01), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR006I (052)-STEND(02), 2012.106 08:41:32 EXECUTION ENDS ADR013I (052)-CLTSK(01), 2012.106 08:41:32 TASK COMPLETED WITH RETURN CODE 0008 From: Pommier, Rex R. rex.pomm...@cnasurety.com To: IBM-MAIN@bama.ua.edu Sent: Monday, 16 April 2012 2:10 PM Subject: Re: ADR938E - PROBLEM WITH FASTREPLICATION Is that all you got? The messages manual says that there should have been a reason code with the ADR918I message. Rex -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of John Dawes Sent: Saturday, April 14, 2012 6:18 PM To: IBM-MAIN@bama.ua.edu Subject: ADR938E - PROBLEM WITH FASTREPLICATION G'Day, I am trying to figure out this problem. I checked the error message but I was unable to figure out what I should do or why the problem occurred. ADR918I (052)-DDTFP(01), FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR938E (052)-DDTFP(01), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR006I (052)-STEND(02), 2012.105 02:34:11 EXECUTION ENDS Below is my jcl: //STEP1EXEC PGM=ADRDSSU,REGION=4096K,TIME=1440 //SYSPRINT DD SYSOUT=* //SYSINDD * COPY FULL INDYNAM(RXTRS1) OUTDYNAM(@@883C) ALLE ALLD(*) - FASTREPLICATION(REQUIRED) FCNOCOPY DUMPCONDITIONING ADMIN PURGE Any suggestions? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN The information contained in this e-mail may contain confidential and/or privileged information and is intended for the sole use of the intended recipient. If you are not the intended recipient, you are hereby notified that any unauthorized use, disclosure, distribution or copying of this communication is strictly prohibited and that you will be held responsible for any such unauthorized activity, including liability for any resulting damages. As appropriate, such incident(s) may also be reported to law enforcement. If you received this e-mail in error, please reply to sender and destroy or delete the message and any attachments. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN The information contained in this e-mail may contain confidential and/or privileged information and is intended for the sole use of the intended recipient. If you are not the intended recipient, you are hereby notified that any unauthorized use, disclosure, distribution or copying of this communication is strictly prohibited and that you will be held responsible for any such unauthorized activity, including liability for any resulting damages. As appropriate, such incident(s) may also be reported to law enforcement. If you received this e-mail in error, please reply to sender and destroy or delete the message and any attachments. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: ADR938E - PROBLEM WITH FASTREPLICATION
Is that all you got? The messages manual says that there should have been a reason code with the ADR918I message. Rex -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of John Dawes Sent: Saturday, April 14, 2012 6:18 PM To: IBM-MAIN@bama.ua.edu Subject: ADR938E - PROBLEM WITH FASTREPLICATION G'Day, I am trying to figure out this problem. I checked the error message but I was unable to figure out what I should do or why the problem occurred. ADR918I (052)-DDTFP(01), FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR938E (052)-DDTFP(01), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR006I (052)-STEND(02), 2012.105 02:34:11 EXECUTION ENDS Below is my jcl: //STEP1EXEC PGM=ADRDSSU,REGION=4096K,TIME=1440 //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY FULL INDYNAM(RXTRS1) OUTDYNAM(@@883C) ALLE ALLD(*) - FASTREPLICATION(REQUIRED) FCNOCOPY DUMPCONDITIONING ADMIN PURGE Any suggestions? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN The information contained in this e-mail may contain confidential and/or privileged information and is intended for the sole use of the intended recipient. If you are not the intended recipient, you are hereby notified that any unauthorized use, disclosure, distribution or copying of this communication is strictly prohibited and that you will be held responsible for any such unauthorized activity, including liability for any resulting damages. As appropriate, such incident(s) may also be reported to law enforcement. If you received this e-mail in error, please reply to sender and destroy or delete the message and any attachments. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: ADR938E - PROBLEM WITH FASTREPLICATION
Are the two volumes RXTRS1 and @@883C part of the same SFI (the same DASD box)? If not, then FlashCopy cannot be used for the requested operation. Gerhard Am 16.04.2012 20:10, schrieb Pommier, Rex R.: Is that all you got? The messages manual says that there should have been a reason code with the ADR918I message. Rex -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of John Dawes Sent: Saturday, April 14, 2012 6:18 PM To: IBM-MAIN@bama.ua.edu Subject: ADR938E - PROBLEM WITH FASTREPLICATION G'Day, I am trying to figure out this problem. I checked the error message but I was unable to figure out what I should do or why the problem occurred. ADR918I (052)-DDTFP(01), FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR938E (052)-DDTFP(01), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR006I (052)-STEND(02), 2012.105 02:34:11 EXECUTION ENDS Below is my jcl: //STEP1EXEC PGM=ADRDSSU,REGION=4096K,TIME=1440 //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY FULL INDYNAM(RXTRS1) OUTDYNAM(@@883C) ALLE ALLD(*) - FASTREPLICATION(REQUIRED) FCNOCOPY DUMPCONDITIONING ADMIN PURGE Any suggestions? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN The information contained in this e-mail may contain confidential and/or privileged information and is intended for the sole use of the intended recipient. If you are not the intended recipient, you are hereby notified that any unauthorized use, disclosure, distribution or copying of this communication is strictly prohibited and that you will be held responsible for any such unauthorized activity, including liability for any resulting damages. As appropriate, such incident(s) may also be reported to law enforcement. If you received this e-mail in error, please reply to sender and destroy or delete the message and any attachments. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
ADR938E - PROBLEM WITH FASTREPLICATION
G'Day, I am trying to figure out this problem. I checked the error message but I was unable to figure out what I should do or why the problem occurred. ADR918I (052)-DDTFP(01), FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR938E (052)-DDTFP(01), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME RXTRS1 ADR006I (052)-STEND(02), 2012.105 02:34:11 EXECUTION ENDS Below is my jcl: //STEP1 EXEC PGM=ADRDSSU,REGION=4096K,TIME=1440 //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY FULL INDYNAM(RXTRS1) OUTDYNAM(@@883C) ALLE ALLD(*) - FASTREPLICATION(REQUIRED) FCNOCOPY DUMPCONDITIONING ADMIN PURGE Any suggestions? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
