Oh no, stop, this thread drifts off to a wrong direction. Probably I wasn't clear enough. So forget everything I told you, forget any malfunction of drives.
New try: I have 2 sources of information: 1. HSEND Q ACT (TCBADDRESS) which gives me the active HSM tasks with request no. and tcb address 2. any monitor (e.g. MXI TAPE), showing the SUN/STK robot drives used by HSM and the mounted volsers If there is an active request using tapes (e.g. recycle, recall from ML2) I'd like to know what volsers are involved. Is there any HSM command telling me for example: - recall currently uses volser 111111 - recycle currently uses volsers 222222, 333333, 444444 Werner Kuehnel IBM Mainframe Discussion List <IBM-MAIN@BAMA.UA.EDU> schrieb am 02.09.2008 12:56:31: > Werner, > > It would help to know your issue. > > Are you an HSMPLEX, a SYSPLEX a MONOPLEX? > What is your OS? z/OS V1.7??? What type of robots do you use ATL, VTS, > STK, EMC? > > Why are you varying the drives on/offline? How is HSM holding them? > Does HSM hold onto your tape drives during one type of process? Migration, > Backup, Dump, Recall? > > HSM during MIGRATION, RECALL, BACKUP, processes will require a mount of a > tape if it is setup that way. Typically HSM only requests a Tape Drive when > it needs it. It does not have a pre allocation process for drives and then > just hangs onto them. > > Can you help me understand your problem better? > > Does HSM HOLD ONTO THE TAPE when one of these processes completes? Are you > short on Tape drives and so trying to manually control how HSM uses them? > > More details will be helpful to me. > > Lizette Koehler > > > > > > > I'm no HSM guy, so please bear with me ...... > > Currently we're having lots of trouble with our roboter units and have > > to > > vary on/offline them more often than usual. > > When units are in use by HSM we would like to know what HSM request (we > > have request number and tcb address) uses which unit(s). > > Is there any command or way to get this information out of HSM? My > > search > > through the manuals wasn't successful yet. > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html