Re: TSO - Automatic notify messages after log on
It seems Tom was right, we found a new exit that we didn't ask. In SMPE we found the exit applied and don't know what it is doing yet, we are going to check it but if it is not necessary we can reject it. Thanks a lot to all for your time. 2007/12/5, Walt Farrell <[EMAIL PROTECTED]>: > > On Sun, 2 Dec 2007 17:54:42 -0500, Angel Tamayo <[EMAIL PROTECTED]> > wrote: > > >Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS 1.8, > but > >5 days ago we noticed a difference in TSO between being logged on and not > >logged on at the time the job completes with notify messages: > > > >If I'm logged on when the job finishes, I do receive the notify, but if > I'm > >not logged on I don't receive it the next time I logon as I did before > >upgrade from z/OS 1.7 to z/OS 1.8. > > > >We implemented in the LOGON procedure the next command: QCMND 'LISTBC'. > This > >command is working fine, but I need to restore the automatic notification > as > >it was working before the upgrade. > > This is probably too obvious to provide the answer, but are you sure that > you didn't request NOMAIL or NONOTICES on the logon panel? > > -- > Walt > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
On Sun, 2 Dec 2007 17:54:42 -0500, Angel Tamayo <[EMAIL PROTECTED]> wrote: >Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS 1.8, but >5 days ago we noticed a difference in TSO between being logged on and not >logged on at the time the job completes with notify messages: > >If I'm logged on when the job finishes, I do receive the notify, but if I'm >not logged on I don't receive it the next time I logon as I did before >upgrade from z/OS 1.7 to z/OS 1.8. > >We implemented in the LOGON procedure the next command: QCMND 'LISTBC'. This >command is working fine, but I need to restore the automatic notification as >it was working before the upgrade. This is probably too obvious to provide the answer, but are you sure that you didn't request NOMAIL or NONOTICES on the logon panel? -- Walt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
It's monoplex. 2007/12/5, ITURIEL DO NASCIMENTO NETO <[EMAIL PROTECTED]>: > > Angel, > > Is your 1.8 part of any Sysplex ? Monoplex ? > > > > Atenciosamente / Regards / Saludos > > Ituriel do Nascimento Neto > Banco Bradesco S/A > 4254/DPCD Alphaville > Engenharia de Software - Sistemas Operacionais Mainframes > Tel: 55 11 4197-2021 Fax: 55 11 4197-2814 > > > AVISO LEGAL Esta mensagem é > destinada exclusivamente para a(s) pessoa(s) a quem é dirigida, podendo > conter informação confidencial e/ou legalmente privilegiada. Se você não for > destinatário desta mensagem, desde já fica notificado de abster-se a > divulgar, copiar, distribuir, examinar ou, de qualquer forma, utilizar a > informação contida nesta mensagem, por ser ilegal. Caso você tenha recebido > esta mensagem por engano, pedimos que nos retorne este E-Mail, promovendo, > desde logo, a eliminação do seu conteúdo em sua base de dados, registros ou > sistema de controle. Fica desprovida de eficácia e validade a mensagem que > contiver vínculos obrigacionais, expedida por quem não detenha poderes de > representação. > > > LEGAL ADVICE This message is > exclusively destined for the people to whom it is directed, and it can bear > private and/or legally exceptional information. If you are not addressee of > this message, since now you are advised to not release, copy, distribute, > check or, otherwise, use the information contained in this message, because > it is illegal. If you received this message by mistake, we ask you to return > this email, making possible, as soon as possible, the elimination of its > contents of your database, registrations or controls system. The message > that bears any mandatory links, issued by someone who has no representation > powers, shall be null or void. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
RES: TSO - Automatic notify messages after log on
Angel, Is your 1.8 part of any Sysplex ? Monoplex ? Atenciosamente / Regards / Saludos Ituriel do Nascimento Neto Banco Bradesco S/A 4254/DPCD Alphaville Engenharia de Software - Sistemas Operacionais Mainframes Tel: 55 11 4197-2021 Fax: 55 11 4197-2814 AVISO LEGAL Esta mensagem é destinada exclusivamente para a(s) pessoa(s) a quem é dirigida, podendo conter informação confidencial e/ou legalmente privilegiada. Se você não for destinatário desta mensagem, desde já fica notificado de abster-se a divulgar, copiar, distribuir, examinar ou, de qualquer forma, utilizar a informação contida nesta mensagem, por ser ilegal. Caso você tenha recebido esta mensagem por engano, pedimos que nos retorne este E-Mail, promovendo, desde logo, a eliminação do seu conteúdo em sua base de dados, registros ou sistema de controle. Fica desprovida de eficácia e validade a mensagem que contiver vínculos obrigacionais, expedida por quem não detenha poderes de representação. LEGAL ADVICE This message is exclusively destined for the people to whom it is directed, and it can bear private and/or legally exceptional information. If you are not addressee of this message, since now you are advised to not release, copy, distribute, check or, otherwise, use the information contained in this message, because it is illegal. If you received this message by mistake, we ask you to return this email, making possible, as soon as possible, the elimination of its contents of your database, registrations or controls system. The message that bears any mandatory links, issued by someone who has no representation powers, shall be null or void. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
There is no differences between SEND section in z/OS 1.7 and SEND section in z/OS 1.8 but it is different than the yours: THE FOLLOWING ARE THE PARMLIB OPTIONS FOR SEND: OPERSEND(ON) USERSEND(ON) SAVE(ON) CHKBROD(OFF) LOGNAME(*) USEBROD(ON) MSGPROTECT(OFF) SYSPLEXSHR(OFF) OPERSEWAIT(ON) USERLOGSIZE(1,2) BROADCAST(DATASET(SYS1.BRODCAST) 2007/12/4, Field, Alan C. <[EMAIL PROTECTED]>: > > Did something change in PARMLIB member IKJTSO00? Are you using the same > PARMLIB on 1.8 as 1.7? > > Here is the SEND section from ours: > > SEND /* SEND COMMAND DEFAULTS */ + >OPERSEND(ON) /* */ + >USERSEND(ON) /* */ + >SAVE(ON) /* */ + >CHKBROD(ON)/* */ + >USEBROD(ON)/* */ + >MSGPROTECT(OFF)/* */ + >OPERSEWAIT(OFF)/* */ + >SYSPLEXSHR(ON) /* */ + >LOGNAME(ULOG.DATA) /* */ > > > > > > Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS > 1.8, > > but > > 5 days ago we noticed a difference in TSO between being logged on and > > not logged on at the time the job completes with notify messages: > > > > If I'm logged on when the job finishes, I do receive the notify, but > if > > I'm not logged on I don't receive it the next time I logon as I did > > before upgrade from z/OS 1.7 to z/OS 1.8. > > > > We implemented in the LOGON procedure the next command: QCMND > 'LISTBC'. > > This command is working fine, but I need to restore the automatic > > notification as it was working before the upgrade. > > > > I don't know too much about how TSO works but I can follow > instructions, > > could somebody tell me what do i have to check or what do i have to > > change to restore the automatic notification ? > > > > > > Thanks a lot, > > > > Angel Tamayo > > System Programmer > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
Did something change in PARMLIB member IKJTSO00? Are you using the same PARMLIB on 1.8 as 1.7? Here is the SEND section from ours: SEND /* SEND COMMAND DEFAULTS */ + OPERSEND(ON) /* */ + USERSEND(ON) /* */ + SAVE(ON) /* */ + CHKBROD(ON)/* */ + USEBROD(ON)/* */ + MSGPROTECT(OFF)/* */ + OPERSEWAIT(OFF)/* */ + SYSPLEXSHR(ON) /* */ + LOGNAME(ULOG.DATA) /* */ > Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS 1.8, > but > 5 days ago we noticed a difference in TSO between being logged on and > not logged on at the time the job completes with notify messages: > > If I'm logged on when the job finishes, I do receive the notify, but if > I'm not logged on I don't receive it the next time I logon as I did > before upgrade from z/OS 1.7 to z/OS 1.8. > > We implemented in the LOGON procedure the next command: QCMND 'LISTBC'. > This command is working fine, but I need to restore the automatic > notification as it was working before the upgrade. > > I don't know too much about how TSO works but I can follow instructions, > could somebody tell me what do i have to check or what do i have to > change to restore the automatic notification ? > > > Thanks a lot, > > Angel Tamayo > System Programmer -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
Thanks a lot for your responses. The answer for the last three questions: 1.- Did you then check for the IKJEESnn or IKJVSNXn system exits: We are not using those exits. 2.- Are there any messages in the SYSLOG at the point in time where a batch job would normally execute the NOTIFY?: At the end any job there are a normal SEND message: SE '15.01.07 J0295959 $HASP165 ATAMAYOJ ENDED AT SYS3 MAXCC=1',LOGON,USER=(ATAMAYO) 3.- What message appear in SYSLOG when the NOTIFY is issued and you're not logged on ?. The message that appears in SYSLOG is the same as the question 2: SE '15.01.07 J0295959 $HASP165 ATAMAYOJ ENDED AT SYS3 MAXCC=1',LOGON,USER=(ATAMAYO) 2007/12/4, ITURIEL DO NASCIMENTO NETO <[EMAIL PROTECTED]>: > > Angel, > > What message appear in SYSLOG when the NOTIFY is issued and you're not > logged on ? > > > Atenciosamente / Regards / Saludos > > Ituriel do Nascimento Neto > Banco Bradesco S/A > 4254/DPCD Alphaville > Engenharia de Software - Sistemas Operacionais Mainframes > > Tel: 55 11 4197-2021 Fax: 55 11 4197-2814 > > > -Mensagem original- > De: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] Em nome > de Angel Tamayo > Enviada em: domingo, 2 de dezembro de 2007 20:55 > Para: IBM-MAIN@BAMA.UA.EDU > Assunto: TSO - Automatic notify messages after log on > > Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS 1.8, > but > 5 days ago we noticed a difference in TSO between being logged on and > not logged on at the time the job completes with notify messages: > > If I'm logged on when the job finishes, I do receive the notify, but if > I'm not logged on I don't receive it the next time I logon as I did > before upgrade from z/OS 1.7 to z/OS 1.8. > > We implemented in the LOGON procedure the next command: QCMND 'LISTBC'. > This command is working fine, but I need to restore the automatic > notification as it was working before the upgrade. > > I don't know too much about how TSO works but I can follow instructions, > could somebody tell me what do i have to check or what do i have to > change to restore the automatic notification ? > > > Thanks a lot, > > Angel Tamayo > System Programmer > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search > the archives at http://bama.ua.edu/archives/ibm-main.html > > AVISO LEGAL Esta mensagem é > destinada exclusivamente para a(s) pessoa(s) a quem é dirigida, podendo > conter informação confidencial e/ou legalmente privilegiada. Se você não for > destinatário desta mensagem, desde já fica notificado de abster-se a > divulgar, copiar, distribuir, examinar ou, de qualquer forma, utilizar a > informação contida nesta mensagem, por ser ilegal. Caso você tenha recebido > esta mensagem por engano, pedimos que nos retorne este E-Mail, promovendo, > desde logo, a eliminação do seu conteúdo em sua base de dados, registros ou > sistema de controle. Fica desprovida de eficácia e validade a mensagem que > contiver vínculos obrigacionais, expedida por quem não detenha poderes de > representação. > > > LEGAL ADVICE This message is > exclusively destined for the people to whom it is directed, and it can bear > private and/or legally exceptional information. If you are not addressee of > this message, since now you are advised to not release, copy, distribute, > check or, otherwise, use the information contained in this message, because > it is illegal. If you received this message by mistake, we ask you to return > this email, making possible, as soon as possible, the elimination of its > contents of your database, registrations or controls system. The message > that bears any mandatory links, issued by someone who has no representation > powers, shall be null or void. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
RES: TSO - Automatic notify messages after log on
Angel, What message appear in SYSLOG when the NOTIFY is issued and you're not logged on ? Atenciosamente / Regards / Saludos Ituriel do Nascimento Neto Banco Bradesco S/A 4254/DPCD Alphaville Engenharia de Software - Sistemas Operacionais Mainframes Tel: 55 11 4197-2021 Fax: 55 11 4197-2814 -Mensagem original- De: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] Em nome de Angel Tamayo Enviada em: domingo, 2 de dezembro de 2007 20:55 Para: IBM-MAIN@BAMA.UA.EDU Assunto: TSO - Automatic notify messages after log on Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS 1.8, but 5 days ago we noticed a difference in TSO between being logged on and not logged on at the time the job completes with notify messages: If I'm logged on when the job finishes, I do receive the notify, but if I'm not logged on I don't receive it the next time I logon as I did before upgrade from z/OS 1.7 to z/OS 1.8. We implemented in the LOGON procedure the next command: QCMND 'LISTBC'. This command is working fine, but I need to restore the automatic notification as it was working before the upgrade. I don't know too much about how TSO works but I can follow instructions, could somebody tell me what do i have to check or what do i have to change to restore the automatic notification ? Thanks a lot, Angel Tamayo System Programmer -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html AVISO LEGAL Esta mensagem é destinada exclusivamente para a(s) pessoa(s) a quem é dirigida, podendo conter informação confidencial e/ou legalmente privilegiada. Se você não for destinatário desta mensagem, desde já fica notificado de abster-se a divulgar, copiar, distribuir, examinar ou, de qualquer forma, utilizar a informação contida nesta mensagem, por ser ilegal. Caso você tenha recebido esta mensagem por engano, pedimos que nos retorne este E-Mail, promovendo, desde logo, a eliminação do seu conteúdo em sua base de dados, registros ou sistema de controle. Fica desprovida de eficácia e validade a mensagem que contiver vínculos obrigacionais, expedida por quem não detenha poderes de representação. LEGAL ADVICE This message is exclusively destined for the people to whom it is directed, and it can bear private and/or legally exceptional information. If you are not addressee of this message, since now you are advised to not release, copy, distribute, check or, otherwise, use the information contained in this message, because it is illegal. If you received this message by mistake, we ask you to return this email, making possible, as soon as possible, the elimination of its contents of your database, registrations or controls system. The message that bears any mandatory links, issued by someone who has no representation powers, shall be null or void. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
Angel, Are there any messages in the SYSLOG at the point in time where a batch job would normally execute the NOTIFY? Regards, Ulrich Krueger -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Angel Tamayo Sent: Monday, December 03, 2007 15:02 To: IBM-MAIN@BAMA.UA.EDU Subject: Re: TSO - Automatic notify messages after log on Thanks for your responses. I have access to the old system in other LPAR and the displays of the command D IKJTSO,SEND are exactly the same, there is no differences. But in the LPAR with z/OS 1.7 works and in LPAR with z/OS 1.8 doesn't work the automatic notification. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
Angel, And did you then check for the system exits that I mentioned? -- Tom Schmidt On Mon, 3 Dec 2007 18:02:00 -0500, Angel Tamayo wrote: >Thanks for your responses. > >I have access to the old system in other LPAR and the displays of the >command D IKJTSO,SEND are exactly the same, there is no differences. But in >the LPAR with z/OS 1.7 works and in LPAR with z/OS 1.8 doesn't work the >automatic notification. > > >2007/12/3, Tom Schmidt <[EMAIL PROTECTED]>: >> >> Angel, >> >> If you have access to both the old and new systems, please issue: >> >> D IKJTSO,SEND >> >> Review the displays for differences. If there are no (zero) differences >> then >> you might want to see whether the old system was using one (or more) of >> the >> IKJEESnn or IKJVSNXn system exits. (They provide for site modification of >> SEND, OPERATOR SEND and LISTBC processing. See z/OS VvRr.0 TSO/E >> Customization manual for dirty details.) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
Thanks for your responses. I have access to the old system in other LPAR and the displays of the command D IKJTSO,SEND are exactly the same, there is no differences. But in the LPAR with z/OS 1.7 works and in LPAR with z/OS 1.8 doesn't work the automatic notification. 2007/12/3, Tom Schmidt <[EMAIL PROTECTED]>: > > Angel, > > If you have access to both the old and new systems, please issue: > > D IKJTSO,SEND > > Review the displays for differences. If there are no (zero) differences > then > you might want to see whether the old system was using one (or more) of > the > IKJEESnn or IKJVSNXn system exits. (They provide for site modification of > SEND, OPERATOR SEND and LISTBC processing. See z/OS VvRr.0 TSO/E > Customization manual for dirty details.) > > If you only have access to the new system, then please issue and post the > results of the system response to 'D IKJTSO,SEND' and someone will likely > notice what is (and is not) happening. > > -- > Tom Schmidt > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
Angel, If you have access to both the old and new systems, please issue: D IKJTSO,SEND Review the displays for differences. If there are no (zero) differences then you might want to see whether the old system was using one (or more) of the IKJEESnn or IKJVSNXn system exits. (They provide for site modification of SEND, OPERATOR SEND and LISTBC processing. See z/OS VvRr.0 TSO/E Customization manual for dirty details.) If you only have access to the new system, then please issue and post the results of the system response to 'D IKJTSO,SEND' and someone will likely notice what is (and is not) happening. -- Tom Schmidt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
1.- I ran Sync command but there is no change. 2.- I ran Prof command with next output: CHAR(0) LINE(0)PROMPT INTERCOM NOPAUSE NOMSGID NOMODE NOWTPMSG NORECO VER PREFIX(ATAMAYO) PLANGUAGE(ENU) SLANGUAGE(ENU) VARSTORAGE(LOW) DEFAULT LINE/CHARACTER DELETE CHARACTERS IN EFFECT FOR THIS TERMINAL 2007/12/3, Itschak Mugzach <[EMAIL PROTECTED]>: > > JES uses TSO / Console SEND command to notify job end. SEND has a > parameter > to force logging the message if user is not logged on. If LISTBC returns > the > lost messages, then the messages are logged in broadcast. Run PROF command > to see if your user is in broadcast mode or not. > > Itschak > > > Itschak Mugzach, Director > SecuriTeam Software ltd. > Tel: +972 (522) 986404 > Skype: Securiteam-Software > Email: [EMAIL PROTECTED] > Gmail: [EMAIL PROTECTED] for large mails > > -Original Message- > From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On > Behalf > Of Angel Tamayo > Sent: Monday, December 03, 2007 12:55 AM > To: IBM-MAIN@BAMA.UA.EDU > Subject: TSO - Automatic notify messages after log on > > Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS 1.8, > but > 5 days ago we noticed a difference in TSO between being logged on and not > logged on at the time the job completes with notify messages: > > If I'm logged on when the job finishes, I do receive the notify, but if > I'm > not logged on I don't receive it the next time I logon as I did before > upgrade from z/OS 1.7 to z/OS 1.8. > > We implemented in the LOGON procedure the next command: QCMND 'LISTBC'. > This > command is working fine, but I need to restore the automatic notification > as > it was working before the upgrade. > > I don't know too much about how TSO works but I can follow instructions, > could somebody tell me what do i have to check or what do i have to change > to restore the automatic notification ? > > > Thanks a lot, > > Angel Tamayo > System Programmer > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email > to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the > archives at http://bama.ua.edu/archives/ibm-main.html > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
JES uses TSO / Console SEND command to notify job end. SEND has a parameter to force logging the message if user is not logged on. If LISTBC returns the lost messages, then the messages are logged in broadcast. Run PROF command to see if your user is in broadcast mode or not. Itschak Itschak Mugzach, Director SecuriTeam Software ltd. Tel: +972 (522) 986404 Skype: Securiteam-Software Email: [EMAIL PROTECTED] Gmail: [EMAIL PROTECTED] for large mails -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Angel Tamayo Sent: Monday, December 03, 2007 12:55 AM To: IBM-MAIN@BAMA.UA.EDU Subject: TSO - Automatic notify messages after log on Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS 1.8, but 5 days ago we noticed a difference in TSO between being logged on and not logged on at the time the job completes with notify messages: If I'm logged on when the job finishes, I do receive the notify, but if I'm not logged on I don't receive it the next time I logon as I did before upgrade from z/OS 1.7 to z/OS 1.8. We implemented in the LOGON procedure the next command: QCMND 'LISTBC'. This command is working fine, but I need to restore the automatic notification as it was working before the upgrade. I don't know too much about how TSO works but I can follow instructions, could somebody tell me what do i have to check or what do i have to change to restore the automatic notification ? Thanks a lot, Angel Tamayo System Programmer -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO - Automatic notify messages after log on
Did you ever sync your BROADCAST dataset on the new system? Regards, Ulrich Krueger -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Angel Tamayo Sent: Sunday, December 02, 2007 14:55 To: IBM-MAIN@BAMA.UA.EDU Subject: TSO - Automatic notify messages after log on Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS 1.8, but 5 days ago we noticed a difference in TSO between being logged on and not logged on at the time the job completes with notify messages: If I'm logged on when the job finishes, I do receive the notify, but if I'm not logged on I don't receive it the next time I logon as I did before upgrade from z/OS 1.7 to z/OS 1.8. We implemented in the LOGON procedure the next command: QCMND 'LISTBC'. This command is working fine, but I need to restore the automatic notification as it was working before the upgrade. I don't know too much about how TSO works but I can follow instructions, could somebody tell me what do i have to check or what do i have to change to restore the automatic notification ? Thanks a lot, Angel Tamayo System Programmer -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
TSO - Automatic notify messages after log on
Recently (15 days ago) we upgrade successfully our z/OS 1.7 to z/OS 1.8, but 5 days ago we noticed a difference in TSO between being logged on and not logged on at the time the job completes with notify messages: If I'm logged on when the job finishes, I do receive the notify, but if I'm not logged on I don't receive it the next time I logon as I did before upgrade from z/OS 1.7 to z/OS 1.8. We implemented in the LOGON procedure the next command: QCMND 'LISTBC'. This command is working fine, but I need to restore the automatic notification as it was working before the upgrade. I don't know too much about how TSO works but I can follow instructions, could somebody tell me what do i have to check or what do i have to change to restore the automatic notification ? Thanks a lot, Angel Tamayo System Programmer -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html