Re: CHPID dynamic Activation error
Jake, Have you tried running 'Channel Problem Determination' function from the SE on the affected chpid? Depending on the System z server you have and the microcode level, you will get some useful diagnostics from this. Hope this helps. Roger -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: CHPID dynamic Activation error
Hello Roger,
The output are as :
COMMAND INPUT ===> /DS P,3000 SCROLL ===>
CSR
RESPONSE=DEV1
IEE459I 19.13.40 DEVSERV PATHS 065
UNIT DTYPE M CNT VOLSER CHPID=PATH STATUS
RTYPE SSID CFW TC DFW PIN DC-STATE CCA DDC CYL CU-TYPE
03000,33903 ,O,000,LX3000,A0=+ A1=+ A2=+ A3=+ A4=< A5=- A6=- A7=-
2107 3000 Y YY. YY. N SIMPLEX 00 00 1113 2107
SYMBOL DEFINITIONS
O = ONLINE + = PATH AVAILABLE
- = LOGICALLY OFF, PHYSICALLY OFF < = PHYSICALLY UNAVAILABLE
COMMAND INPUT ===> /DS QD,3000SCROLL
===> CSR
RESPONSE=DEV1
IEE459I 19.15.03 DEVSERV QDASD 067
UNIT VOLSER SCUTYPE DEVTYPE CYL SSID SCU-SERIAL DEV-SERIAL EFC
03000 LX3000 2107951 2107900 1113 3000 0175-WW631 0175-WW631 *OK
1 DEVICE(S) MET THE SELECTION CRITERIA
0 DEVICE(S) FAILED EXTENDED FUNCTION CHECKING
On Fri, Nov 22, 2013 at 10:51 PM, Roger Steyn wrote:
> Hello Jake ,
> This actually means "The system could not add the specified path to a
> path group."
>
> Is the cable connected properly ? That's the first thing to be checked .
>
> Also look at logrec data Sounds to me like a "no resources" condition
> over the control unit . Try these commands
>
>
> a) DS P,
>
> b) DS QD,
>
> Thank you ,
> Steyn !
>
>
>
>
> On Thursday, November 21, 2013 5:32 PM, Lizette Koehler <
> stars...@mindspring.com> wrote:
>
> I would start by doing an internet search on your messages IOS444I. There
> should be some helpful hints out there.
>
> Lizette
>
>
>
> > -Original Message-
> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> > Behalf Of Jake anderson
> > Sent: Thursday, November 21, 2013 1:18 AM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: CHPID dynamic Activation error
> >
> > Hello Group,
> >
> > For our New storage Box,While dynamically adding new CHPID to existing
> control
> > UNIT, I tried displaying new CHIPD but its only show that path are
> online
> not
> > operational. I have referred the below link but I am not able to get any
> Clue.
> >
> >
> > http://publibz.boulder.ibm.com/cgi-
> > bin/bookmgr_OS390/BOOKS/IEA2M9C1/SPTM013022
> >
> > D M=CHP(E2)
> > IEE174I 23.18.04 DISPLAY M 250
> > CHPID E2: TYPE=1A, DESC=FICON POINT TO POINT, ONLINE DEVICE
> > STATUS FOR CHANNEL PATH E2
> > 0 1 2 3 4 5 6 7 8 9 A B C D E F
> > 300 * * * * * * * * * * * * * * * *
> > 301 * * * * * * * * * * * * * * * *
> > 302 * * * * * * * * * * * * * * * *
> > 303 * * * * * * * * * * * * * * * *
> > 304 * * * * * * * * * * * * * * * *
> > 305 * * * * * * * * * * * * * * * *
> > 306 * * * * * * * * * * * * * * * *
> > 307 * * * * * * * * * * * * * * * *
> > 308 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL
> > 309 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL 30A AL AL AL AL AL AL
> > AL AL AL AL AL AL AL AL AL AL
> >
> >
> > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F38,E2)
> > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3E,E2)
> > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3F,E2)
> >
> > Could someone please shed light on the above. Any suggestions or
> directions are
> > much appreciated.
> >
> > Jake
> >
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: CHPID dynamic Activation error
Hello Jake , This actually means "The system could not add the specified path to a path group." Is the cable connected properly ? That's the first thing to be checked . Also look at logrec data Sounds to me like a "no resources" condition over the control unit . Try these commands a) DS P, b) DS QD, Thank you , Steyn ! On Thursday, November 21, 2013 5:32 PM, Lizette Koehler wrote: I would start by doing an internet search on your messages IOS444I. There should be some helpful hints out there. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Jake anderson > Sent: Thursday, November 21, 2013 1:18 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: CHPID dynamic Activation error > > Hello Group, > > For our New storage Box,While dynamically adding new CHPID to existing control > UNIT, I tried displaying new CHIPD but its only show that path are online not > operational. I have referred the below link but I am not able to get any Clue. > > > http://publibz.boulder.ibm.com/cgi- > bin/bookmgr_OS390/BOOKS/IEA2M9C1/SPTM013022 > > D M=CHP(E2) > IEE174I 23.18.04 DISPLAY M 250 > CHPID E2: TYPE=1A, DESC=FICON POINT TO POINT, ONLINE DEVICE > STATUS FOR CHANNEL PATH E2 > 0 1 2 3 4 5 6 7 8 9 A B C D E F > 300 * * * * * * * * * * * * * * * * > 301 * * * * * * * * * * * * * * * * > 302 * * * * * * * * * * * * * * * * > 303 * * * * * * * * * * * * * * * * > 304 * * * * * * * * * * * * * * * * > 305 * * * * * * * * * * * * * * * * > 306 * * * * * * * * * * * * * * * * > 307 * * * * * * * * * * * * * * * * > 308 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL > 309 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL 30A AL AL AL AL AL AL > AL AL AL AL AL AL AL AL AL AL > > > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F38,E2) > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3E,E2) > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3F,E2) > > Could someone please shed light on the above. Any suggestions or directions are > much appreciated. > > Jake > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: CHPID dynamic Activation error
I would start by doing an internet search on your messages IOS444I. There should be some helpful hints out there. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Jake anderson > Sent: Thursday, November 21, 2013 1:18 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: CHPID dynamic Activation error > > Hello Group, > > For our New storage Box,While dynamically adding new CHPID to existing control > UNIT, I tried displaying new CHIPD but its only show that path are online not > operational. I have referred the below link but I am not able to get any Clue. > > > http://publibz.boulder.ibm.com/cgi- > bin/bookmgr_OS390/BOOKS/IEA2M9C1/SPTM013022 > > D M=CHP(E2) > IEE174I 23.18.04 DISPLAY M 250 > CHPID E2: TYPE=1A, DESC=FICON POINT TO POINT, ONLINE DEVICE > STATUS FOR CHANNEL PATH E2 > 0 1 2 3 4 5 6 7 8 9 A B C D E F > 300 * * * * * * * * * * * * * * * * > 301 * * * * * * * * * * * * * * * * > 302 * * * * * * * * * * * * * * * * > 303 * * * * * * * * * * * * * * * * > 304 * * * * * * * * * * * * * * * * > 305 * * * * * * * * * * * * * * * * > 306 * * * * * * * * * * * * * * * * > 307 * * * * * * * * * * * * * * * * > 308 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL > 309 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL 30A AL AL AL AL AL AL > AL AL AL AL AL AL AL AL AL AL > > > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F38,E2) > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3E,E2) > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3F,E2) > > Could someone please shed light on the above. Any suggestions or directions are > much appreciated. > > Jake > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
CHPID dynamic Activation error
Hello Group, For our New storage Box,While dynamically adding new CHPID to existing control UNIT, I tried displaying new CHIPD but its only show that path are online not operational. I have referred the below link but I am not able to get any Clue. http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/IEA2M9C1/SPTM013022 D M=CHP(E2) IEE174I 23.18.04 DISPLAY M 250 CHPID E2: TYPE=1A, DESC=FICON POINT TO POINT, ONLINE DEVICE STATUS FOR CHANNEL PATH E2 0 1 2 3 4 5 6 7 8 9 A B C D E F 300 * * * * * * * * * * * * * * * * 301 * * * * * * * * * * * * * * * * 302 * * * * * * * * * * * * * * * * 303 * * * * * * * * * * * * * * * * 304 * * * * * * * * * * * * * * * * 305 * * * * * * * * * * * * * * * * 306 * * * * * * * * * * * * * * * * 307 * * * * * * * * * * * * * * * * 308 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL 309 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL 30A AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F38,E2) IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3E,E2) IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3F,E2) Could someone please shed light on the above. Any suggestions or directions are much appreciated. Jake -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
