Re: NetView question
Hi Mark, Thanks a lot that's good to know. In this case I've just discovered it in the Defining Automation Policy manual. It generates this command by default. I need to add a parameter to the command and this can be done using the Application Information screen specifying the string of characters to be added. So the command itself doesn't need to be defined, just the parameters. The example in the manual is that if you want the command to be this: S VTAM,,,(LIST=00) Then you need to define this in the Application Information Startup Parameters field: ,,,(LIST=00) Regards, John. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: NetView question
John, In case you're not aware, there is a NetView and a SAusers group on groups.io where you can post your question to also. marktre...@gmail.com On Thu, Jan 13, 2022, 10:35 John Blythe Reid wrote: > Hello, > > I have a question about this NetView screen: > > AOFKINFO Automation Control - Command Dialogs Line 57of > 166 > Domain Id . : NETVx DISPINFO Date . . : > 01/13/22 > Operator Id : xTime . . : > 16:15:33 > > Subsystem => ADAxxx Target => CPUx System name, domain ID > > or sysplex name > > >Start Up Process - > > Prestart : > >None > > > Startup : > > >Start command to be used : > > MVS S ADAxxx > > >User Start Up Commands : > > CMD=(NORMAL,,'MVS S ADAxxx,MSGCLASS=T') > > CMD=(EMER,,'MVS S ADAxxx,MSGCLASS=T,ING=Y') > > In the policy definition for Automation Control the two 'User Start Up > Commands' are defined. However the 'Start command to be used', the 'MVS S > ADAxxx' is not defined anywhere. But it must have come from somewhere. > > I've been digging through the manuals to no avail. Could anyone please > shed any light on where this command would have come from ? > > Thanks in advance. > > Regards, > John. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
NetView question
Hello, I have a question about this NetView screen: AOFKINFO Automation Control - Command Dialogs Line 57of 166 Domain Id . : NETVx DISPINFO Date . . : 01/13/22 Operator Id : xTime . . : 16:15:33 Subsystem => ADAxxx Target => CPUx System name, domain ID or sysplex name Start Up Process - Prestart : None Startup : Start command to be used : MVS S ADAxxx User Start Up Commands : CMD=(NORMAL,,'MVS S ADAxxx,MSGCLASS=T') CMD=(EMER,,'MVS S ADAxxx,MSGCLASS=T,ING=Y') In the policy definition for Automation Control the two 'User Start Up Commands' are defined. However the 'Start command to be used', the 'MVS S ADAxxx' is not defined anywhere. But it must have come from somewhere. I've been digging through the manuals to no avail. Could anyone please shed any light on where this command would have come from ? Thanks in advance. Regards, John. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN