Re: zVM RSU Package
Anson, you can also order it via internet delivery. The ptf number is always UM97release number, e.g. zVM 5.3 UM97530, zVM 5.4 UM97540. There is also a menu point of ordering recommended Service for zVM, There you can get also the critical service ptfs. kind regards Franz Josef Pohlen Am 09.02.2010 08:20, schrieb Anson: Hi, I'm not sure how you get the zVM RSU package? Can it be downloaded from shopz directly? I only can see it's delivered via DVD and Tape in shopz. Best Regards Anson Y 好玩贺卡等你发，邮箱贺卡全新上线！ http://cn.rd.yahoo.com/mail_cn/tagline/card/*http://card.mail.cn.yahoo.com/
Re: tcpip / osae guest lan / tpf configuration problem
Mike -- Thanks for the suggestion. I've just tried it, but ipwizard doesn't seem to help with setting up multiple adapters nor with connecting them together. i -- Original Message -- Received: 12:49 PM COT, 02/08/2010 From: Michael MacIsaac mike...@us.ibm.com To: IBMVM@LISTSERV.UARK.EDU Subject: Re: tcpip / osae guest lan / tpf configuration problem Any suggestions what to try next? I haven't been following this thread closely, but have you tried IPWIZARD? I used to configure z/VM's TCPIP using the CONFIG file, but then I found IPWIZARD. It usually just works, and in a matter of minutes. Then I never have to touch TCP/IP on z/VM again (now Linux is another matter ... :)) So you could try backing out the CONFIG files on TCPMAINT, logging onto MAINT, ACCessing 193 as G, and running IPWIZARD, filling in the values, and pressing F5 and F8 where appropriate. Again, just a suggestion ... Mike MacIsaac mike...@us.ibm.com (845) 433-7061
Re: zVM RSU Package
I use IBMLINK http://www.ibm.com/ibmlink Frank M. Ramaekers Jr. From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Anson Sent: Tuesday, February 09, 2010 1:21 AM To: IBMVM@LISTSERV.UARK.EDU Subject: zVM RSU Package Hi, I'm not sure how you get the zVM RSU package? Can it be downloaded from shopz directly? I only can see it's delivered via DVD and Tape in shopz. Best Regards Anson Y 好玩贺卡等你发，邮箱贺卡全新上线！ http://cn.rd.yahoo.com/mail_cn/tagline/card/*http:/card.mail.cn.yahoo.com/ _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
Re: zVM RSU Package
That is easier than Shopz. It is too bad that all z/VM distribution cannot be done from IBMLINK. Regards, Richard Schuh From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Frank M. Ramaekers Sent: Tuesday, February 09, 2010 6:17 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: zVM RSU Package I use IBMLINK http://www.ibm.com/ibmlink Frank M. Ramaekers Jr. From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Anson Sent: Tuesday, February 09, 2010 1:21 AM To: IBMVM@LISTSERV.UARK.EDU Subject: zVM RSU Package Hi, I'm not sure how you get the zVM RSU package? Can it be downloaded from shopz directly? I only can see it's delivered via DVD and Tape in shopz. Best Regards Anson Y 好玩贺卡等你发，邮箱贺卡全新上线！http://cn.rd.yahoo.com/mail_cn/tagline/card/*http:/card.mail.cn.yahoo.com/ _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
DB2 Server for VM with VMDSS enabled
Hello DB2 Server for VM users with VMDSS enabled running in z/VM 5.30 and above: VM APAR VM64775 has been opened to address the ARIYI19 09 abends encountered by DB2/VM server running with VMDSS enabled under z/VM 5.30 and above. ERROR DESCRIPTION: An error in pageable PGMBK processing causes segments which may contain changed pages to be skipped. This can lead to changed pages not being saved which in turn can lead to DB2 data corruption. The PTFs are now available: R530 UM32966 R540 UM32967 R610 UM32968 Note that this may happen in a particular workload and in a very heavily loaded (paging rate up to hundred of thousands pages per second) VM system. So far, only couple of customers had reported this kind of abends to IBM. The abends can be avoided by changing the workload. Please review DOC APAR PK73730 for more details. Regards, Roland
Re: DB2 Server for VM with VMDSS enabled
Hmm, gotta point out that The abends can be avoided by changing the workload. sounds a lot like, Doc, it hurts when I do this! Then don't do that...
use of 3494 library in a second level vm system
Is it possible to use a 3494 tape library in a second level VM system? We have a 1st level VM 5.2 system that I just recently installed DFSMS/VM on as RMSONLY. And I successfully tested use of 3590 tape drive s that are in our 3494 library on our 1st level VM 5.2 system. I also have a second level VM 5.4 system installed and have DFSMS/VM installed on that as RMSONLY also. We would like to test out CA's VM:Tape, VM:Backup, and VM:Operator on this second level system (user vm54test). But I am unsure on how to use the 3494 library on the second level system. Our tape devices controlled by this library are c00-c05. I varied c00 offline in our z/OS system (in a separate LPAR) and online in VM 1st level (and left c01-c05 online in z/os and offline in z/VM 1st level) and then issued: att c00 vm54test c00 But when I try to start RMSMASTR on the second level vm54test system, I get: TAPE 0C00 ATTACHED TO RMSMASTR 0C00 FSMBAC2006E Library I/O error; reason code = 3800, request identifier = 0, devic e = 0C00, library = FSMBAC2019E Sense Data = 804800C020302041C3804004E80 0BC361311 TAPE 0C00 DETACHED BY RMSMASTR Is there something else that needs to be done other than attaching the tape device to the second level system to get this to work?
Re: use of 3494 library in a second level vm system
Did you put STDEVOPT LIBRARY CTL in the 2nd level system's directory entry? -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Barbara Andrews Sent: Tuesday, February 09, 2010 4:00 PM To: IBMVM@LISTSERV.UARK.EDU Subject: use of 3494 library in a second level vm system Is it possible to use a 3494 tape library in a second level VM system? We have a 1st level VM 5.2 system that I just recently installed DFSMS/VM on as RMSONLY. And I successfully tested use of 3590 tape drive= s that are in our 3494 library on our 1st level VM 5.2 system. I also have a second level VM 5.4 system installed and have DFSMS/VM= installed on that as RMSONLY also. We would like to test out CA's VM:Tape, VM:Backup, and VM:Operator on this second level system (user vm54test). But I am unsure on how to use the 3494 library on the second = level system. Our tape devices controlled by this library are c00-c05. = I varied c00 offline in our z/OS system (in a separate LPAR) and online in = VM 1st level (and left c01-c05 online in z/os and offline in z/VM 1st level) and then issued: att c00 vm54test c00 But when I try to start RMSMASTR on the second level vm54test system, I = get: TAPE 0C00 ATTACHED TO RMSMASTR 0C00 = FSMBAC2006E Library I/O error; reason code = 3800, request identifier == 0, devic e = 0C00, library == = FSMBAC2019E Sense Data = 804800C020302041C3804004E80 0BC361311 = = TAPE 0C00 DETACHED BY RMSMASTR Is there something else that needs to be done other than attaching the = tape device to the second level system to get this to work? =
Re: use of 3494 library in a second level vm system
Did you add STDEVOPT LIBRARY CTL to your first level directory for the VM540 second level system guest? Ray Waters -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Barbara Andrews Sent: Tuesday, February 09, 2010 3:00 PM To: IBMVM@LISTSERV.UARK.EDU Subject: use of 3494 library in a second level vm system Is it possible to use a 3494 tape library in a second level VM system? We have a 1st level VM 5.2 system that I just recently installed DFSMS/VM on as RMSONLY. And I successfully tested use of 3590 tape drives that are in our 3494 library on our 1st level VM 5.2 system. I also have a second level VM 5.4 system installed and have DFSMS/VM installed on that as RMSONLY also. We would like to test out CA's VM:Tape, VM:Backup, and VM:Operator on this second level system (user vm54test). But I am unsure on how to use the 3494 library on the second level system. Our tape devices controlled by this library are c00-c05. I varied c00 offline in our z/OS system (in a separate LPAR) and online in VM 1st level (and left c01-c05 online in z/os and offline in z/VM 1st level) and then issued: att c00 vm54test c00 But when I try to start RMSMASTR on the second level vm54test system, I get: TAPE 0C00 ATTACHED TO RMSMASTR 0C00 FSMBAC2006E Library I/O error; reason code = 3800, request identifier = 0, devic e = 0C00, library = FSMBAC2019E Sense Data = 804800C020302041C3804004E80 0BC361311 TAPE 0C00 DETACHED BY RMSMASTR Is there something else that needs to be done other than attaching the tape device to the second level system to get this to work? NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
Re: use of 3494 library in a second level vm system
No, I didn't realize that statement had to the on the userid for the guest. I just had it on both the 1st level and 2nd level RMSMASTR id's. I'll give that a try. Thanks. On Tue, 9 Feb 2010 16:13:50 -0500, Ray Waters ray.wat...@opensolutions.com wrote: Did you add STDEVOPT LIBRARY CTL to your first level directory for the VM540 second level system guest? Ray Waters -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Barbara Andrews Sent: Tuesday, February 09, 2010 3:00 PM To: IBMVM@LISTSERV.UARK.EDU Subject: use of 3494 library in a second level vm system Is it possible to use a 3494 tape library in a second level VM system? We have a 1st level VM 5.2 system that I just recently installed DFSMS/VM on as RMSONLY. And I successfully tested use of 3590 tape driv es that are in our 3494 library on our 1st level VM 5.2 system. I also have a second level VM 5.4 system installed and have DFSMS/V M installed on that as RMSONLY also. We would like to test out CA's VM:Tape, VM:Backup, and VM:Operator on this second level system (user vm54test). But I am unsure on how to use the 3494 library on the second level system. Our tape devices controlled by this library are c00-c05. I varied c00 offline in our z/OS system (in a separate LPAR) and online in VM 1st level (and left c01-c05 online in z/os and offline in z/VM 1st level) and then issued: att c00 vm54test c00 But when I try to start RMSMASTR on the second level vm54test system, I get: TAPE 0C00 ATTACHED TO RMSMASTR 0C00 FSMBAC2006E Library I/O error; reason code = 3800, request identifier = 0, devic e = 0C00, library = FSMBAC2019E Sense Data = 804800C020302041C3804004E80 0BC361311 TAPE 0C00 DETACHED BY RMSMASTR Is there something else that needs to be done other than attaching the tape device to the second level system to get this to work? NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for deliverin g the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
