Re: OSA Express
We had this problem when we running on a z10 and these are the fixes. The formal PTF's are now available for PK98608. The PTF numbers are: . R530 PSY UK51449 R540 PSY UK51450 R610 PSY UK51451 Here is the text of the red alert that went out: October 28, 2009 PK98608 OSA-EXPRESS3 DEVICES FAIL DURING STARTUP WITH RESETTING EVENTS USERS AFFECTED: All users running OSA-Express3 devices with microcode level 7.31.0 and beyond who have a z/VM TCP/IP stack configuration that includes a VIPA interface. If you want more specifics, please see the updated PDF on the red alert page: http://www.vm.ibm.com/service/redalert If this applies to you, please get the APAR applied. Thank you, Keri Borrego IBM z/VM Support David Juárez Department of Veterans Affairs z/OS and z/VM Systems Programmer 512-326-6116 Work -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Steve Perez Sent: Friday, May 21, 2010 10:49 AM To: IBMVM@LISTSERV.UARK.EDU Subject: OSA Express We are new to running zVM 5.4 and have Red Hat zLinux as guest machines. We are using OSA Express 3. Two OSAs on different chpids and on differen t NIC addresses. We separated the two OSA because we want the primary OSA to be used only for production traffic and the secondary OSA for Netbacku p backup traffic only. However when we perform the Netbackup backup of files, the primary OSA slows down or stalls until the backup traffic completes on the secondary OSA. I heard that there may be a bug that is causing one OSA disabled while th e other OSA is enabled and active? Possibly with OSA Express 3 and TCP Layer 2? I searched the IBM knowledge base and could not find a match or locate a fix. I am holding off on opening a issue with IBM for now, but will soon if I can't find anyone having or have run into the same issue. Any help would be appreciated. Thanks, Steve.
Re: EREP recordings
Hi Ed. If you are willing to share I would like a copy of your exec as well please. Thanks. david.jua...@va.gov David Juárez Department of Veterans Affairs z/OS and z/VM Systems Programmer 512-326-6116 Work -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Ticona, Luis Sent: Tuesday, January 05, 2010 8:38 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: EREP recordings Hi Ed! Can you share this exec here with us at the NYC PD computer center?. Thank you! Luis Ticona 646-610-5304 -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Edward M Martin Sent: Tuesday, July 14, 2009 11:20 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: EREP recordings Hello Frank, We have a EREP EXEC that creates the reports and clear the EREP file. Then we use a modified EMAIL EXEC (MAILEREP EXEC) to email the reports to the 3-4 people. Ed Martin Aultman Health Foundation 330-363-5050 ext 35050 -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Huegel, Thomas Sent: Tuesday, July 14, 2009 10:16 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: EREP recordings I run the reports and clear the recorder weekly. I leave the reports in the print queue and let SFPURGER purge them after 60 days. Even that may be overkill, I can't remember the last time a CE asked for an EREP report. -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Frank M. Ramaekers Sent: Tuesday, July 14, 2009 8:39 AM To: IBMVM@LISTSERV.UARK.EDU Subject: EREP recordings What do you do with EREP recording information? Right now, it is simply filling up EREP's 191 disk. Do you run reports? What do you use for the reporting parameters? Do you archive it to tape/disk? TIA, Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr.Fax: (254)741-5777 Waco, Texas 76710 _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
Re: Time Estimate to Create a Fully Production Ready z/VM System!
Valerie, it is difficult to give you estimates since it all depends on experience level and number of people on the team and if they are dedicated to the team or have other duties to work on like production! I have however given you a list of tasks our team came up with that you may not have thought of to get to a production environment; I'm sure there are others. Best wishes, David J. Certification required Oracle 10g certified with Red Hat 5 Patrol Agent QMX Agent Veritas Net backup DASD related tasks Hook up Open System DASD to z/VM Use Red Hat 5.0 kickstart to create a Linux guest on Open System DASD Use STK kickstart to create a Linux guest on a standalone server on the floor Create new Linux guest to run Nagios, deployment scripts Acquire replicatable DASD for z/VM on mainframe DASD in DEC 2008 Ensure z/VM backups are in place;replicatable;tested! Ensure Linux backups are in place;replicatable;tested! Ensure Oracle RMAN backups are in place;replicatable;tested! Automate shutdown of Oracle Migrate data to/from open systems Network related tasks OSA connection for backups Is redundancy set up in general? Via OSA cards? Technical tasks to discuss How to maintain software(z/VM, Linux, Oracle) z9 PORs. Definition of large, medium, small images and how they are created Non-technical related tasks Charge back accounting for CPU,DASD,tape storage, z/VM, zLinux, Oracle; accounting codes Maintaining production; roll of operations Training for z/VM, network,Linux, Oracle, Performance,RACF,Operators? etc. Resource spreadsheet for tracking z/VM, Linux, Oracle,network resources; discuss what should be in it Security related tasks Install RACF LINUX security(harden) Oracle security(harden) Performance related tasks Resources required; CPU, DASD, tape, network(ports); Do we have the same in Philly for DR? Performance monitoring; Network, Linux, z/VM, Oracle Documentation needed Process to kickstart a new Linux guest Process to clone a new Linux guest Process to define new Linux guest to z/VM. Startup/shutdown procedures for z/VM,Linux,Oracle Process to create new Oracle system Process to do a new Oracle build z/VM maintenance procedures and how to move into production Things to learn how to do Debugging FTP EREP Stand Alone Dumps Network traces; VTAM, TCPIP Slip Traps (if applicable) How to Print a text file, spool file System logs; view, print,FTP, save Standards that need to be discussed Maintenance procedures for all software (single or multiple customers on one Linux guest). DASD volume naming conventions; SAN, mainframe Mini disk numbering convention Linux guest Ids EREP, SMF,DUMPS, System logs; where to store and naming convention(daily, weekly, monthly?) Backup naming standards for system config, user directory Future Direction Consolidation - share binaries Multiple APPs in one zLinux guest Install z/VM 5.4 for z10 Create test LPAR create checklist for people who request zLinux guests z/vm maintenance schedule David Juárez Department of Veterans Affairs z/OS and z/VM Systems Programmer 512-326-6116 Work -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Le Grande Valerie Sent: Thursday, March 26, 2009 10:07 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Time Estimate to Create a Fully Production Ready z/VM System! Rich, We will be using backups from z/OS and/or combined with network backup fo r Linux. Not decided yet. We realize DIRMAINT is good to learn and we need to do that. We also need to decide with Security people whether we want to use LDAP with RACF on Mainframe or use what their current Linux uses. These decisions need to be made as well as getting all in place. What I REALLY need now is some kind of time/resource estimate for planning, learning, implementing beyond Proof of Concept. At this point we have a z/VM system up running a Linux guest that we can connect to. Estimates?? Thanks, Valerie
Re: Last call for chair bears for SHARE in Austin
Rich I can chair the following sessions if you still need help. 9134 Dynamically managing hardware I/O Configuration Using VM 9118 Servicing and Maintaining z/VM with VM/SES I will attend the training on Sunday for chairs. David Juárez Department of Veterans Affairs z/OS and z/VM Systems Programmer 512-326-6116 Work -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Rich Smrcina Sent: Wednesday, February 18, 2009 11:03 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Last call for chair bears for SHARE in Austin SHARE in Austin less than two weeks away! There are plenty of sessions left for charing. You really don't want to leave the speaker alone to fend for themselves in the sea of inquisitive faces, do you? Well do you!!!? I know you want to chair some sessions, I know you want to help out the Linux and VM Program! If you plan to attend a session anyway, why not volunteer to chair one or more sessions? It's very easy, I've done it, so it can't be that difficult. You know the drill, envy of your friends and colleagues, meet and introduce the speaker, make a speech, count attendees, keep order and collect evaluation forms, etc, etc... Here's the really cool part: To go along with the SHARE themes, one of which is Total Enterprise Virtualization, the Linux and VM Program is featured prominently in a new Virtualization theme room with a separate set of sessions. These sessions are listed along with the sessions below with a V after the session number. The list of sessions, in time sequence, is below: 9102VMon09:30a930Introduction to Virtualization: z/VM Basic Concepts and TermsBill Bitner 9127Mon03:00p1500z/VM for MVS Systems Programmers - Part 1 of 2 Martha McConaghy/Mark Post 9241Mon03:00p1500Securing Linux with RACF on z/VMAlan Altmark 9286Mon04:30p1630Tending the SANity of the Flock - SAN Experiences at Nationwide Rick Troth 9234Mon04:30p1630Managing Linux under z/VM using the Linux Performance Suite (ESALPS)Barton Robinson 9128Mon04:30p1630z/VM for MVS Systems Programmers - Part 2 of 2 Martha McConaghy/Mark Post 9293Tue08:00a800What's New in Red Hat Enterprise Linux 5 Bradford Hinson 9161Tue08:00a800Security Zones on z/VM Alan Altmark 9277Tue09:30a930Fedora for System z: The Open Source Build Process Explained Bradford Hinson 9294Tue09:30a930Automating Resource Management for Linux on z/VM - Lessons Learned Edmund MacKenty 9134Tue03:00p1500Dynamically Managing Hardware I/O Configuration Using VMRick Barlow 9249Tue04:30p1630Putting Linux on System z into Production: True Stories Erich Amrehn 9240Tue04:30p1630Linux on z/VM System Programmer Survival Guide Robert (Jay) Brenneman 9210Wed08:00a800z/VM and Linux Disaster Recovery - A Customer Experience Lee Stewart 9215Wed09:30a930Linux on System z at Wells Fargo: Penguins Board the Stagecoach Marcy Cortes 9272Wed11:00a1100Taming Your Storage Hungry Linuxen Using CMM(A) David Kreuter 9279Wed11:00a1100Problem Determination with Linux on System z Martin Schwidefsky 9166Wed01:30p1330z/VM Performance Case StudiesBill Bitner 9129Wed03:00p1500z/VM Security and IntegrityAlan Altmark 9146Wed03:00p1500Using Unicenter VM:Operator To Manage Linux Servers Brian Jagos 9273Wed03:00p1500Linux on z/VM Performance CasesRob van der Heij 9156Wed04:30p1630Configuring LDAP on z/VM and Linux Rich Smrcina 9266Wed04:30p1630Monitoring Linux Guests and Processes with Linux Tools Martin Schwidefsky 9137VThu08:00a800Virtual Linux Server Disaster Recovery Planning Rick Barlow 9224Thu08:00a800Linux System Management for the Mainframe System Programmer - Part 1 of 2Mark Post 9118Thu09:30a930Servicing and Maintaining z/VM with VM/SES - Live Demo Jim Vincent 9157Thu01:30p1330Virtualization and Disaster Recovery: Implementing and Automating Disaster/Data Recovery for z/VM Dan Martin 9290Thu03:00p1500Managing Your Red Hat Enterprise Linux Guests with RHN Satellite Bradford Hinson 9239Thu03:00p1500Linux for System z Goody BagRobert (Jay) Brenneman 9287Fri08:00a800Installing a Novell SLES 10 Starter System without a Net(work)Mark Post 9270Fri08:00a800Using Linux on System z for Web 2.0 - Infrastructure Wolfgang Taphorn 9274Fri09:30a930The Linux IPL ProcedureEdmund MacKenty -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 http://www.linkedin.com/in/richsmrcina Catch
Re: Last call for chair bears for SHARE in Austin
Rich I will know by Friday if I can chair a session or not. David Juárez Department of Veterans Affairs z/OS and z/VM Systems Programmer 512-326-6116 Work -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Rich Smrcina Sent: Wednesday, February 18, 2009 11:03 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Last call for chair bears for SHARE in Austin SHARE in Austin less than two weeks away! There are plenty of sessions left for charing. You really don't want to leave the speaker alone to fend for themselves in the sea of inquisitive faces, do you? Well do you!!!? I know you want to chair some sessions, I know you want to help out the Linux and VM Program! If you plan to attend a session anyway, why not volunteer to chair one or more sessions? It's very easy, I've done it, so it can't be that difficult. You know the drill, envy of your friends and colleagues, meet and introduce the speaker, make a speech, count attendees, keep order and collect evaluation forms, etc, etc... Here's the really cool part: To go along with the SHARE themes, one of which is Total Enterprise Virtualization, the Linux and VM Program is featured prominently in a new Virtualization theme room with a separate set of sessions. These sessions are listed along with the sessions below with a V after the session number. The list of sessions, in time sequence, is below: 9102VMon09:30a930Introduction to Virtualization: z/VM Basic Concepts and TermsBill Bitner 9127Mon03:00p1500z/VM for MVS Systems Programmers - Part 1 of 2 Martha McConaghy/Mark Post 9241Mon03:00p1500Securing Linux with RACF on z/VMAlan Altmark 9286Mon04:30p1630Tending the SANity of the Flock - SAN Experiences at Nationwide Rick Troth 9234Mon04:30p1630Managing Linux under z/VM using the Linux Performance Suite (ESALPS)Barton Robinson 9128Mon04:30p1630z/VM for MVS Systems Programmers - Part 2 of 2 Martha McConaghy/Mark Post 9293Tue08:00a800What's New in Red Hat Enterprise Linux 5 Bradford Hinson 9161Tue08:00a800Security Zones on z/VM Alan Altmark 9277Tue09:30a930Fedora for System z: The Open Source Build Process Explained Bradford Hinson 9294Tue09:30a930Automating Resource Management for Linux on z/VM - Lessons Learned Edmund MacKenty 9134Tue03:00p1500Dynamically Managing Hardware I/O Configuration Using VMRick Barlow 9249Tue04:30p1630Putting Linux on System z into Production: True Stories Erich Amrehn 9240Tue04:30p1630Linux on z/VM System Programmer Survival Guide Robert (Jay) Brenneman 9210Wed08:00a800z/VM and Linux Disaster Recovery - A Customer Experience Lee Stewart 9215Wed09:30a930Linux on System z at Wells Fargo: Penguins Board the Stagecoach Marcy Cortes 9272Wed11:00a1100Taming Your Storage Hungry Linuxen Using CMM(A) David Kreuter 9279Wed11:00a1100Problem Determination with Linux on System z Martin Schwidefsky 9166Wed01:30p1330z/VM Performance Case StudiesBill Bitner 9129Wed03:00p1500z/VM Security and IntegrityAlan Altmark 9146Wed03:00p1500Using Unicenter VM:Operator To Manage Linux Servers Brian Jagos 9273Wed03:00p1500Linux on z/VM Performance CasesRob van der Heij 9156Wed04:30p1630Configuring LDAP on z/VM and Linux Rich Smrcina 9266Wed04:30p1630Monitoring Linux Guests and Processes with Linux Tools Martin Schwidefsky 9137VThu08:00a800Virtual Linux Server Disaster Recovery Planning Rick Barlow 9224Thu08:00a800Linux System Management for the Mainframe System Programmer - Part 1 of 2Mark Post 9118Thu09:30a930Servicing and Maintaining z/VM with VM/SES - Live Demo Jim Vincent 9157Thu01:30p1330Virtualization and Disaster Recovery: Implementing and Automating Disaster/Data Recovery for z/VM Dan Martin 9290Thu03:00p1500Managing Your Red Hat Enterprise Linux Guests with RHN Satellite Bradford Hinson 9239Thu03:00p1500Linux for System z Goody BagRobert (Jay) Brenneman 9287Fri08:00a800Installing a Novell SLES 10 Starter System without a Net(work)Mark Post 9270Fri08:00a800Using Linux on System z for Web 2.0 - Infrastructure Wolfgang Taphorn 9274Fri09:30a930The Linux IPL ProcedureEdmund MacKenty -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2009 - Orlando, FL - May 15-19, 2009
Re: Moving DASD to a new volume range
Thanks Mike and Aria for your input. We did plan on having everything shutdown and are going disk to disk. David Juárez Department of Veterans Affairs z/OS and z/VM Systems Programmer 512-326-6116 Work -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Mike Walter Sent: Tuesday, December 09, 2008 10:16 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Moving DASD to a new volume range As with any backup process that is not aware of the underlying file systems, FDR could back up files in an inconsistent state (i.e. files are changing as they are being backed up, usually: not committed to DASD). Thus, ensure that the target backup volumes are not being used by any system when being backed up. Best practice: shutdown the z/VM guest servers and even the z/VM system (since presumably it is being moved, too) during the backup. FDR can copy directly from disk to disk (presuming that the architecture is the same). Saves tape mounts and downtime. FDR has the capability to re-label the from volume when the copy has completed. Handy to prevent accidental usage when you are IPLing from the new DASD. All the data is on the old volumes, only the label has been changed to protect the innocent. ;-) Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. Juarez, David T. (AITC) [EMAIL PROTECTED] Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU 12/09/2008 09:49 AM Please respond to The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To IBMVM@LISTSERV.UARK.EDU cc Subject Moving DASD to a new volume range Hi there z/VM gurus. We are going to move our z/VM 5.3 and Red Hat Linux 5.2 DASD volumes from address range 7xxx to 8xxx using FDR full volume physical backups/restores and keep the same volume labels. We will modify the system config file to vary online the 8xxx range and IPL off the new 8xxx RES pack. Is there anything else we need to change or be aware of? We are using EMC DASD but I don?t think that matters. FDR runs on z/OS. Thanks! David Juárez Department of Veterans Affairs z/OS and z/VM Systems Programmer The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
Moving DASD to a new volume range
Hi there z/VM gurus. We are going to move our z/VM 5.3 and Red Hat Linux 5.2 DASD volumes from address range 7xxx to 8xxx using FDR full volume physical backups/restores and keep the same volume labels. We will modify the system config file to vary online the 8xxx range and IPL off the new 8xxx RES pack. Is there anything else we need to change or be aware of? We are using EMC DASD but I don't think that matters. FDR runs on z/OS. Thanks! David Juárez Department of Veterans Affairs z/OS and z/VM Systems Programmer
Re: How can we control how much CPU is used by each zLinux guest?
Thanks for the clarification Dave and Mike. David Juárez CDC eServer Systems Support (310B) IT Specialist - Systems Programmer 512-326-6116 Work From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Mike Walter Sent: Monday, November 24, 2008 5:33 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: How can we control how much CPU is used by each zLinux guest? To reply to the David Juarez's post, and clarify Dave Jones' reply, Dave Jones' reply is correct. It just leaves off the dynamic memory change up to the mstor (16G in the example) available via the CP DEFINE STORage command. That dynamic change is gone the moment that userid is logged off, unless it has been matched by Dave's suggestion to update the user directory entry, presuming that a permanent change is desirable (not always the case). We've had instances in which more memory was required for a big app (read: Websphere, or Omegamon/XE) installation, but not needed after the software was installed. Permanently increasing the memory in such instances would be a bad thing, causing extra real z/VM paging and I/O. Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. Dave Jones [EMAIL PROTECTED] Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU 11/24/2008 05:20 PM Please respond to The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To IBMVM@LISTSERV.UARK.EDU cc Subject Re: How can we control how much CPU is used by each zLinux guest? Hi, David. Juarez, David T. wrote: Thanks for the reply Mike. Ok so in your example if I logon with 2G and I do something that requires more than 2G I would need to issue CP DEFINE STORAGE to increase my storage above 2GB but can't request more than 16GB correct? z/VM will not dynamically add more memory up to 16GB? Correct. Your maximum memory size is set to 16GB, and z/VM will not automatically increase your virtual storage from 2GB to 16GB. If your application needs more than 16GB, you have to modify the USER statement in your user directory entry, and bring the modified user directory online. David Juarez IT Specialist -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Mike Walter Sent: Thursday, November 20, 2008 5:29 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: How can we control how much CPU is used by each zLinux guest? David, Others have already supplied the answer to how to limit a guests CPU absorption/abuse. But to answer the question about the USER MSTOR parm... I presume that you are referring to the USER record in the USER DIRECT file (or using whichever Directory Manager product you might have), as documented in the CP Planning and Administration Guide. If so, that mstor is the **maximum** size to which that virtual machine can increased with the 'CP DEFINE STORage' command. The CP DEFINE STORAGE command is dynamic, but instantly destructive to running the virtual machine. When issued, it resets the virtual machine, killing any running operating system. There are two memory sizes defined in the USER record, 'stor' and 'mstor'. 'stor' defines the default memory size of the virtual machine when logged on without any special logon operands. Lets assume that your server 'stor' size is 2G, and the 'msize' (Max size) is 16G. When you logon without any special LOGON operands, the virtual machine memory size will be 2G. But you may specify a size up to the 'mstor', by including the Storage operand to logon, e.g. LOGON yoursrvr S 16G (maybe you're doing some software installation that requires huge amounts of memory for the installation). Your server will then be allocated 16G of memory until you logoff or change it dynamically. OTOH, maybe you logged on with that server's default 2G of storage and after a while find that you temporarily need more memory for some reason. You may issue the command 'CP DEFine STorage 16G' (or anything less) on that server, without logging off. BUT -- when the command is issued, the running operating system in that server is killed instantly. Better... gracefully shut it down before issuing the command, then issue the CP IPL command as needed. Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. -- DJ V/Soft z/VM and mainframe Linux expertise, training, consulting, and software development www.vsoft-software.com The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message
Re: How can we control how much CPU is used by each zLinux guest?
Thanks for the reply Mike. Ok so in your example if I logon with 2G and I do something that requires more than 2G I would need to issue CP DEFINE STORAGE to increase my storage above 2GB but can't request more than 16GB correct? z/VM will not dynamically add more memory up to 16GB? David Juarez IT Specialist -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Mike Walter Sent: Thursday, November 20, 2008 5:29 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: How can we control how much CPU is used by each zLinux guest? David, Others have already supplied the answer to how to limit a guests CPU absorption/abuse. But to answer the question about the USER MSTOR parm... I presume that you are referring to the USER record in the USER DIRECT file (or using whichever Directory Manager product you might have), as documented in the CP Planning and Administration Guide. If so, that mstor is the **maximum** size to which that virtual machine can increased with the 'CP DEFINE STORage' command. The CP DEFINE STORAGE command is dynamic, but instantly destructive to running the virtual machine. When issued, it resets the virtual machine, killing any running operating system. There are two memory sizes defined in the USER record, 'stor' and 'mstor'. 'stor' defines the default memory size of the virtual machine when logged on without any special logon operands. Lets assume that your server 'stor' size is 2G, and the 'msize' (Max size) is 16G. When you logon without any special LOGON operands, the virtual machine memory size will be 2G. But you may specify a size up to the 'mstor', by including the Storage operand to logon, e.g. LOGON yoursrvr S 16G (maybe you're doing some software installation that requires huge amounts of memory for the installation). Your server will then be allocated 16G of memory until you logoff or change it dynamically. OTOH, maybe you logged on with that server's default 2G of storage and after a while find that you temporarily need more memory for some reason. You may issue the command 'CP DEFine STorage 16G' (or anything less) on that server, without logging off. BUT -- when the command is issued, the running operating system in that server is killed instantly. Better... gracefully shut it down before issuing the command, then issue the CP IPL command as needed. Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. Juarez, David T. [EMAIL PROTECTED] Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU 11/20/2008 03:20 PM Please respond to The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To IBMVM@LISTSERV.UARK.EDU cc Subject How can we control how much CPU is used by each zLinux guest? What controls can be put in place to manage zLinux guests running under z/VM 5.3, so they do not saturate CPU and memory? Does the USER MSTOR parm really limit the zLinux guest to the amount coded? Thanks. David T. Juárez IT Specialist The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
How can we control how much CPU is used by each zLinux guest?
What controls can be put in place to manage zLinux guests running under z/VM 5.3, so they do not saturate CPU and memory? Does the USER MSTOR parm really limit the zLinux guest to the amount coded? Thanks. David T. Juárez IT Specialist
Cost accounting for Linux guest running under z/VM
We are in the process of getting ready to add production Linux guest and we need to know how you are charging back the customer for running Linux under z/VM. We currently charge a fixed fee per month for small, medium and large based on the size of the individual server's memory, cpu, and network connections. Any ideas would be greatly appreciated. Thanks. David Juárez Department of Veterans Affairs IT Specialist - z/OS and z/VM Systems Programmer 512-326-6116
Linux guest not seeing mini disk
We are running z/VM 5.3 with Red Hat Linux 5. We have created a new guest and defined in the user directory some mini disks as follows: USER LIN0003 KK 2G 2G G INCLUDE LNXDFLT OPTION APPLMON MDISK 100 3390 0001 3338 VM7DBF MR MDISK 691 3390 0001 200 VM7DC0 MR MDISK 692 3390 0251 3038 VM7DC0 MR MDISK 693 3390 3289 3338 VM7DC0 MR MDISK 694 3390 6627 3389 VM7DC0 MR When we logon to the linux guest and issue #CP Q V DASD we get the following output and everything looks good. CP Q V DASD DASD 0100 3390 VM7DBF R/W 3338 CYL ON DASD 7DBF SUBCHANNEL = DASD 0101 9336 (VDSK) R/W 524288 BLK ON DASD VDSK SUBCHANNEL = 0011 DASD 0102 9336 (VDSK) R/W1048576 BLK ON DASD VDSK SUBCHANNEL = 0012 DASD 0190 3390 VR7DC4 R/O107 CYL ON DASD 7DC4 SUBCHANNEL = 000C DASD 0191 3390 VM7DA5 R/O300 CYL ON DASD 7DA5 SUBCHANNEL = 000F DASD 019D 3390 VR7DC4 R/O146 CYL ON DASD 7DC4 SUBCHANNEL = 000D DASD 019E 3390 VR7DC4 R/O250 CYL ON DASD 7DC4 SUBCHANNEL = 000E DASD 0592 3390 VR7DC4 R/O 70 CYL ON DASD 7DC4 SUBCHANNEL = 0010 DASD 0691 3390 VM7DC0 R/W200 CYL ON DASD 7DC0 SUBCHANNEL = 0001 DASD 0692 3390 VM7DC0 R/W 3038 CYL ON DASD 7DC0 SUBCHANNEL = 0002 DASD 0693 3390 VM7DC0 R/W 3338 CYL ON DASD 7DC0 SUBCHANNEL = 0003 DASD 0694 3390 VM7DC0 R/W 3389 CYL ON DASD 7DC0 SUBCHANNEL = 0004 When we logon to the linux guest and issue the fdisk -l command we only see one mini disk and two virtual disks as follows: fdisk -l Note: sector size is 4096 (not 512) Disk /dev/dasda: 2461 MB, 2461040640 bytes 15 heads, 12 sectors/track, 3338 cylinders Units = cylinders of 180 * 4096 = 737280 bytes Disk /dev/dasda doesn't contain a valid partition table Disk /dev/dasdb: 268 MB, 268435456 bytes 16 heads, 128 sectors/track, 256 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Disk /dev/dasdb doesn't contain a valid partition table Disk /dev/dasdc: 536 MB, 536870912 bytes 16 heads, 128 sectors/track, 512 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Disk /dev/dasdc doesn't contain a valid partition table Why are we not able to see mini-disk 0691-0694 when we issue the fdisk -l command? Is there some definition in Red Hat Linux 5 we need to make? Thanks in advance for any help. David T. Juárez IT Specialist
Oracle 10g mini disk set up on z/VM 5.3 with Red Hat Linux 4.6 and above
On page 21 in the PDF Using Oracle Solutions on Linux for System Z which can be found at http://www.redbooks.ibm.com/abstracts/sg247573.html it is not clear to me if minidisks 191, 201-204, 301-302 are all needed for Oracle's use or just a few of them. What are Oracle 10g's minidisk requirements when running under z/VM 5.3 and Red Hat Linux 4.6 and above? Thanks in advance. David Juárez CDC eServer Systems Support (310B) IT Specialist - Systems Programmer 512-326-6116 Work
creating an alternate z/VM res and spool pack
We just unloaded z/VM 5.3 and would like to create an alternate RES and spool pack. Current names are 530RES and 530SPL. Does someone have simple procedures to create alternate res and alternate spool volumes so we can IPL off the alternates and leave the original res and spool untouched. The Guide for Automated Installation and Service shows how to backup the Res and saved system and segments but the SPXTAPE utility implies you want to restore to the current spool volume not an alternate. Also is anyone using symbolics in system config and/or the user directory like we do in z/OS parmlib? Thanks. David T. Juárez Department of Veterans Affairs IT Specialist
Re: creating an alternate z/VM res and spool pack
Franz your procedures worked! We are now IPLed off a different Res pack, spool and page pack. Thank you very much for your help. David Juárez CDC eServer Systems Support (310B) IT Specialist - Systems Programmer 512-326-6116 Work -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, July 01, 2008 11:04 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: creating an alternate z/VM res and spool pack David, it's easier than you might think. I have done it several times with this procedure in user maint 1. attach new volumes to maint 2. copy all 530res, (if mod 3 530w01,530w02), 530pag and 530spl to new volumes with DDR. You can of course also restore them from a backup. 3. CPFMTXA device-of-530res 530rs1 LABEL (530rs1 is the new label of the new 530res disk), analog for all other volumes 4. Q MDISK 191 LOC This shows the location of the maint 191 on 530res. 5. DEF MDISK 111 startcyl-of-step4 size-of-step-4 530rs1 (The MAINT user must have OPTION DEVMAINT in user direct when using this command.) AC 111 T X USER DIRECT T C /530RES/530RS1/** (or whatever new label you have set in step3), analog for all other volumes save the changes DIRECTXA USER DIRECT T (The DIRECTORY statement in the new USER DIRECT must point also to the new res. Because it is not the active res it is only updated on disk, not made online) 6. Q MDISK CF1 LOC 7. DEF MDISK 111 startcyl-of-step6 size-of-step-6 530rs1 AC 111 T X SYSTEM CONFIG T C /530RES/530RS1/** (or whatever new label you have set in step3), analog for all other volumes eventually changes of the consoles, but this can also be overwritten with the standalone loader eventually changes of user_volume_include list etc. This depends if you want to start the new vm in 2nd level or lpar. In 2nd level the system sees only the volumes which you define to the user, in lpar it sees all the volumes it is allowed to by iocds. save the changes 8. ready to take IPL. You must do a FORCE start at first IPL Hope this helps. kind regards Franz Josef Pohlen Juarez, David T. schrieb: We just unloaded z/VM 5.3 and would like to create an alternate RES and spool pack. Current names are 530RES and 530SPL. Does someone have simple procedures to create alternate res and alternate spool volumes so we can IPL off the alternates and leave the original res and spool untouched. The Guide for Automated Installation and Service shows how to backup the Res and saved system and segments but the SPXTAPE utility implies you want to restore to the current spool volume not an alternate. Also is anyone using symbolics in system config and/or the user directory like we do in z/OS parmlib? Thanks. David T. Juárez Department of Veterans Affairs IT Specialist