[fsug-tvm] Re: hardy to jaunty upgrade
On Sun, 2009-10-11 at 10:47 +0530, Shino Jacob wrote: what about all the different programs that i have installed, that will go right? I have done a lot of customization to the root user. If you have installed additional software, that will be lost, of course. In that case, an upgrade should be better. I think one way to preserve the configuration of the system is to backup /etc. I am not sure, but it should be possible to retain the customisation by backing up the .files in /root. Best -- V. Sasi Kumar http://swatantryam.blogspot.com --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: GPRS connection Via bluetooth
hope the bluetooth is working in your computerDo you see a bluetooth icon in the notification corner of your desktop?if so can you send files to your phone by right clicking it? Yes I can. 2009/10/11 Srihari k harisult...@gmail.com 2009/10/10 .Keralafarmer chandrasekharan.n...@gmail.com ജിപിആര്എസ് ഉപയോഗിച്ച് ഉബുണ്ടു 9.04 -ല് യുഎസ്ബി വഴി നെറ്റ് കണക്ട് ആകുന്നു. എന്നാല് ബ്ലൂടൂത്ത് പ്രവര്ത്തിക്കുന്നില്ല. സഹായിക്കുക. @ .Keralafarmer hope the bluetooth is working in your computerDo you see a bluetooth icon in the notification corner of your desktop?if so can you send files to your phone by right clicking it? i am using my nokia 2600c to connect via aircel gprs using bluetooth. for doing this i needed to edit two files: /etc/bluetooth/rfcomm.conf and /etc/wvdial.conf for both you need super user permissions, So press Alt+F2 and enter 'gksu gedit' to open gedit as super user. IN the below file to find the Bluetooth address of the device for your mobile phone,Right click the bluetooth icon and choose to browse files now you will find a similar number in location bar of your file browser. open /etc/bluetooth/rfcomm.conf from gedit and edit it to look like follows: # # RFCOMM configuration file. # rfcomm0 { # Automatically bind the device at startup bind yes; #Bluetooth address of the device device 00:24:7D:61:6C:91; #RFCOMM channel for the connection channel 1; #Description of the connection comment Srihari's nokia 2600; } Now for aircel gprs connection the wvdial.conf file can be edited as: for other networks please replace aircelgprs with the access point of your mobile network provider. open /etc/wvdial.conf in gedit and edit to look like: [Dialer Defaults] Init1 = AT+CGDCONT=1,IP,aircelgprs Init2 = ATQ Phone = *99***1# Username = Password = New PPPD = yes Modem = /dev/rfcomm0 Baud = 460800 Once this is set up you can restart the bluetoth daemon by typing in the terminal: sudo /etc/init.d/bluetooth restart to get connected open terminal and type: sudo wvdial Please tell me if it worked or what went wrong, Regards, Srihari K -- ___ മണ്ണിരകളെ കൃഷിയിടങ്ങളില് സംരക്ഷിക്കൂ പ്രകൃതിയും ആരോഗ്യവും സംരക്ഷിക്കപ്പെടട്ടെ! Thank you എസ്.ചന്ദ്രശേഖരന് നായര്, ശ്രീരാഘവ്, പെരുകാവ്, പേയാട്-പി.ഒ, തിരുവനന്തപുരം. 695 573 Ph. 0471 2283033 Mob. 91 9447183033 OR 91 9495983033 Blog: http://keralafarmeronline.com --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: PROBLEM WITH BSNL ADSL ROUTER
Yep, I'll get it back to BSNL. Regards to all. Subin Sebastian College Of Engineering, Munnar +91-944-6475-826 Support Free Software --- On Sat, 10/10/09, Joju Joshua jojujos...@gmail.com wrote: From: Joju Joshua jojujos...@gmail.com Subject: [fsug-tvm] Re: PROBLEM WITH BSNL ADSL ROUTER To: ilug-tvm@googlegroups.com Date: Saturday, October 10, 2009, 10:39 AM On Sat, Oct 10, 2009 at 10:06 AM, subin sebastien subinsebast...@yahoo.com wrote: I've tried to update the firmware. But the config page shows an error. Anyway the modem is working until a power failure occurs. I think it may be a h/w trouble... Yeah. I believe the modem will work well until a power failure or if your switch it off and then turn it on, then again the settings are set back to default, right? It should be a hardware problem, where the settings that you change are not getting saved in it. Same was the issue with my modem, which i took it to the exchange and got it replaced. Probably, you should also do the same... This would be a hardware problem. -- Joju Joshua Change is something that cannot be changed --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] usb-creator problem
I tried to create a usb boot disl using usb -creator, but the created usb disk wont boot. On doing some searching some suggested MBR needs to be installed using install-mbr. How do I do that? -- Miles to go before I Sleep --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: hardy to jaunty upgrade
Mate, the easiest way to do a safe upgrade would be changing software update mirrors under Sytem-Administration-Software Sources, just change the mirrors and hit update. It will give you an option in update manager saying a latest version is available. This way you will not loose any customization or data. On Sun, Oct 11, 2009 at 1:17 PM, Shino Jacob shinoja...@gmail.com wrote: quote That will happen only if your home directory is in the same partition as the root. It is always advisable to have /home in a separate partition so that the OS can be re-installed without affecting your data. /quote what about all the different programs that i have installed, that will go right? I have done a lot of customization to the root user. On Sat, Oct 10, 2009 at 9:41 PM, David Shar dvds...@gmail.com wrote: That is correct. On Sat, Oct 10, 2009 at 11:47 PM, V. Sasi Kumar sasi@gmail.com wrote: On Sat, 2009-10-10 at 19:06 +0800, David Shar wrote: Live cd will erase the data. That will happen only if your home directory is in the same partition as the root. It is always advisable to have /home in a separate partition so that the OS can be re-installed without affecting your data. Best -- V. Sasi Kumar Free Sofware Foundation of India http://swatantryam.blogspot.com -- Miles to go before I Sleep --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: hardy to jaunty upgrade
APTonCD will back up the root directory and it will reverse the changes. On Sun, Oct 11, 2009 at 2:53 PM, V. Sasi Kumar sasi@gmail.com wrote: On Sun, 2009-10-11 at 10:47 +0530, Shino Jacob wrote: what about all the different programs that i have installed, that will go right? I have done a lot of customization to the root user. If you have installed additional software, that will be lost, of course. In that case, an upgrade should be better. I think one way to preserve the configuration of the system is to backup /etc. I am not sure, but it should be possible to retain the customisation by backing up the .files in /root. Best -- V. Sasi Kumar http://swatantryam.blogspot.com --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: usb-creator problem
Try unetbootin, you can find tutorial/instructions on their site. At first run it for DSL or Damn Small Linux, a 50 MB Knoppix based OS. There are many options and I guess it works fine. On Sun, Oct 11, 2009 at 3:39 PM, Shino Jacob shinoja...@gmail.com wrote: I tried to create a usb boot disl using usb -creator, but the created usb disk wont boot. On doing some searching some suggested MBR needs to be installed using install-mbr. How do I do that? -- Miles to go before I Sleep --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: GPRS connection Via bluetooth
I m able to send files via bluetooth but... unable to connect to net by the way i m using Airtel to connect to net errror -- piy...@piyush-laptop:~$ sudo wvdial -- WvDial: Internet dialer version 1.60 -- Cannot get information for serial port. -- Cannot open /dev/rfcomm0: Success -- Cannot get information for serial port. -- Initializing modem. -- Sending: AT+CGDCONT=1,IP,airtelgprs -- Sending: ATQ0 -- Re-Sending: AT+CGDCONT=1,IP,airtelgprs -- Modem not responding. 2009/10/11 .Keralafarmer chandrasekharan.n...@gmail.com Required blue tooth driver for Ubuntu 9.04 to download to run it. I searched on google find so many articles, but I am not able to follow due to a non techie. 2009/10/10 Pi¥Û$ħ МДÐДЙ® piyushthesuperh...@gmail.com I also have same problem.. i request all thread replies to use English... please 2009/10/10 .Keralafarmer chandrasekharan.n...@gmail.com ജിപിആര്എസ് ഉപയോഗിച്ച് ഉബുണ്ടു 9.04 -ല് യുഎസ്ബി വഴി നെറ്റ് കണക്ട് ആകുന്നു. എന്നാല് ബ്ലൂടൂത്ത് പ്രവര്ത്തിക്കുന്നില്ല. സഹായിക്കുക. -- ___ മണ്ണിരകളെ കൃഷിയിടങ്ങളില് സംരക്ഷിക്കൂ പ്രകൃതിയും ആരോഗ്യവും സംരക്ഷിക്കപ്പെടട്ടെ! Thank you എസ്.ചന്ദ്രശേഖരന് നായര്, ശ്രീരാഘവ്, പെരുകാവ്, പേയാട്-പി.ഒ, തിരുവനന്തപുരം. 695 573 Ph. 0471 2283033 Mob. 91 9447183033 OR 91 9495983033 Blog: http://keralafarmeronline.com -- Regards, Pi¥Û$ħ МДÐДЙ madanpiy...@gmail.com piyushma...@ieee.org contact me @ 9910455149 www.facebook.com/piyushmadan www.twitter.com/piyushmadan ~ Dont tell me sky is the limit.. there are also footprints on the moon!! ~ -- ___ മണ്ണിരകളെ കൃഷിയിടങ്ങളില് സംരക്ഷിക്കൂ പ്രകൃതിയും ആരോഗ്യവും സംരക്ഷിക്കപ്പെടട്ടെ! Thank you എസ്.ചന്ദ്രശേഖരന് നായര്, ശ്രീരാഘവ്, പെരുകാവ്, പേയാട്-പി.ഒ, തിരുവനന്തപുരം. 695 573 Ph. 0471 2283033 Mob. 91 9447183033 OR 91 9495983033 Blog: http://keralafarmeronline.com -- Regards, Pi¥Û$ħ МДÐДЙ madanpiy...@ieee.org madanpiy...@gmail.com contact me @ 9910455149 www.facebook.com/piyushmadan www.twitter.com/piyushmadan ~ I dont Overtake .. I TAKEOVER. ~ --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: Opportunity to learn C and contribute to Free Software development
iam in interested in contributing for the project.iam currently doing B-tech in computer engineering at university college of engineering.i have basic knowledge in c and gtk. i hav done a project using these 2 languages for my diploma project.but we used glade to generate it. On Sun, Oct 11, 2009 at 6:19 AM, Anoop John anoopj...@gmail.com wrote: Hi, I am looking for an(or two) enthusiastic volunteer(s) who can work with me on a Free Software project(www.gphpedit.org) with committed time schedules on a medium to long term basis. The technologies are C + GTK but you are not required to know these up front. Interested volunteers will get to use Zyxware infrastructure and Internet at the agreed upon hours while they are contributing to the project. If any of you are interested please get in touch with me directly. Best Regards Anoop John Zyxware Technologies http://www.zyxware.com http://www.anoopjohn.com http://www.thondomraughts.com Be the change you wish to see in the world, M. K. Gandhi -- Jesus loves you --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: Opportunity to learn C and contribute to Free Software development
On Sun, Oct 11, 2009 at 6:19 AM, Anoop John anoopj...@gmail.com wrote: If any of you are interested please get in touch with me directly. I had personally mailed you. --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: usb-creator problem
Finally done. I could create it using usb-creator itself, Previously i gave CDROM as the source to copy from. Then i created and ISO from the cd and tried again. it worked this time. thanks for everybodys replies. I am writing this after booting thru usb. On Sun, Oct 11, 2009 at 9:11 AM, David Shar dvds...@gmail.com wrote: Try unetbootin, you can find tutorial/instructions on their site. At first run it for DSL or Damn Small Linux, a 50 MB Knoppix based OS. There are many options and I guess it works fine. On Sun, Oct 11, 2009 at 3:39 PM, Shino Jacob shinoja...@gmail.com wrote: I tried to create a usb boot disl using usb -creator, but the created usb disk wont boot. On doing some searching some suggested MBR needs to be installed using install-mbr. How do I do that? -- Miles to go before I Sleep -- Miles to go before I Sleep --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: Install Ubuntu in USB Hard Drive
On Fri, Oct 9, 2009 at 3:34 PM, Aneesh A aneesh...@gmail.com wrote: Sure.. Choose the partition and hard disk as USB, as in another normal HDD. This will required around 4gb disk space ? I tried on my 2 gb usb and failed. --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: GPRS connection Via bluetooth
On 10/11/09, Pi¥Û$ħ МДÐДЙ® piyushthesuperh...@gmail.com wrote: -- Initializing modem. -- Sending: AT+CGDCONT=1,IP,airtelgprs -- Sending: ATQ0 -- Re-Sending: AT+CGDCONT=1,IP,airtelgprs -- Modem not responding. Most probably you haven't paired your phone to your computer.Look into your phone and take note what does it show when you are dialing from computer. My Nokia phone was asking wether to allow my computer to dial via it. -- Srihari K --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: GPRS connection Via bluetooth
For airtel the dialup number is : *99# i think Then you will have to change the dialing number line to(in /etc/wvdial.conf): Phone = *99# --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: usb-creator problem
good job. On Sun, Oct 11, 2009 at 10:25 PM, Shino Jacob shinoja...@gmail.com wrote: Finally done. I could create it using usb-creator itself, Previously i gave CDROM as the source to copy from. Then i created and ISO from the cd and tried again. it worked this time. thanks for everybodys replies. I am writing this after booting thru usb. On Sun, Oct 11, 2009 at 9:11 AM, David Shar dvds...@gmail.com wrote: Try unetbootin, you can find tutorial/instructions on their site. At first run it for DSL or Damn Small Linux, a 50 MB Knoppix based OS. There are many options and I guess it works fine. On Sun, Oct 11, 2009 at 3:39 PM, Shino Jacob shinoja...@gmail.com wrote: I tried to create a usb boot disl using usb -creator, but the created usb disk wont boot. On doing some searching some suggested MBR needs to be installed using install-mbr. How do I do that? -- Miles to go before I Sleep -- Miles to go before I Sleep --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: GPRS connection Via bluetooth
Phone is surely paired, because... i can send files through bluetooth. i already changed phone no. Any other suggesstions?!!! On Sun, Oct 11, 2009 at 8:20 PM, Srihari k harisult...@gmail.com wrote: For airtel the dialup number is : *99# i think Then you will have to change the dialing number line to(in /etc/wvdial.conf): Phone = *99# -- Regards, Pi¥Û$ħ МДÐДЙ madanpiy...@ieee.org madanpiy...@gmail.com contact me @ 9910455149 www.facebook.com/piyushmadan www.twitter.com/piyushmadan ~ I dont Overtake .. I TAKEOVER. ~ --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---
[fsug-tvm] Re: Opportunity to learn C and contribute to Free Software development
I want to get more details regarding period of work etc On Sun, Oct 11, 2009 at 6:04 PM, Mahesh Mohan maheshmohan...@gmail.comwrote: On Sun, Oct 11, 2009 at 6:19 AM, Anoop John anoopj...@gmail.com wrote: If any of you are interested please get in touch with me directly. I had personally mailed you. --~--~-~--~~~---~--~~ Freedom is the only law. Freedom Unplugged http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups ilug-tvm group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~--~~~~--~~--~--~---