Hi,
I servicee of airtel broadband. I am trying to cofigure my modem in ubuntu
5.10 using eciadsl.My modems model name is Xentrix X7005Q and it figures in
the supported modem list of eciadsl. THe modem on the outside is marked RB
comtec and i have connected using USB interface. Now i get the following
output when i run eciadsl-firmware. Please point me to anything that could
help me understand the problem or If anyone could suggest any alternative
method for settin up this modem on ubuntu, that would be great too
[EMAIL PROTECTED]:~$ sudo eciadsl-firmware
can't set interface 0 to use alt setting 1
: No route to host
ERROR eciadsl-firmware: failed
eciadsl-firmware: success
---end of output---
and this is the output on eciadsl-doctor
[EMAIL PROTECTED]:~$ sudo eciadsl-doctor
You are using linux kernel version 2.6.12-9-386
Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
UHCI support is not needed
OHCI support is OK
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
Loading EZ-USB firmware...
can't set interface 0 to use alt setting 1
: No route to host
ERROR eciadsl-firmware: failed
eciadsl-firmware: success
Loading the GlobeSpan firmware...
ERROR can't set configuration 1
ERROR eciadsl-synch: failed
You are using pppd version 2.4.3 (untested)
You have an /etc/ppp/options file. Options in this file may conflict with
options from /etc/ppp/peers/adsl. We suggest to remove this file or make a
backup copy.
No existing PPP connection... trying to make one (please wait)
using channel 31
Using interface ppp0
Connect: ppp0 <--> /dev/pts/12
Script /usr/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x0915 -product
0x8101 -mode VCM_RFC2364 finished (pid 10824), status = 0xfa
Modem hangup
Connection terminated.
-- end of
output
If it helps I have noticed one thing about my modem it has two lights. One
is marked "pwr" and the other is marked "link/data"
Now this light for "link/data" comes on when windows xp welcome screen comes
and stays on. But it never comes on when Im using linux. I use ubuntu-linux
5.10.
Thanks for any help.
--
Puneet
My eciadsl.conf
VID1=0915
PID1=8101
VID2=0915
PID2=8101
MODE=VCM_RFC2364
VCI=32
VPI=1
FIRMWARE=/etc/eciadsl/firmware00.bin
SYNCH=/etc/eciadsl/synch01.bin
[EMAIL PROTECTED]
PPPD_PASSWD=
USE_DHCP=yes
USE_STATICIP=no
STATICIP=
GATEWAY=
MODEM=Other
MODEM_CHIPSET=GS7070
SYNCH_ALTIFACE=4
PPPOECI_ALTIFACE=4
PROVIDER=Other
DNS1=
DNS2=
I obtained the values for vid1,pid1,vid2,pid2 using eciadsl-probe-device
[EMAIL PROTECTED]:~$ sudo eciadsl-probe-device
WARNING: before probing, please ensure that your USB devices are plugged in
and that your system's USB support is properly configured
USB modem to probe must be UNinitialized, it will surely appear as an
unknown
device (because it is not initialized yet), for instance: ? (0547:2131)
config read from /etc/eciadsl/eciadsl.conf
your USB devices:
1: nVidia Corporation nForce2 USB Controller / Linux 2.6.12-9-386 ehci_hcd
(:)
2: nVidia Corporation nForce2 USB Controller (#2) / Linux
2.6.12-9-386ohci_hcd (:)
3: nVidia Corporation nForce2 USB Controller / Linux 2.6.12-9-386 ohci_hcd
(:)
4: USB-ADSL Modem / GlobeSpan Inc. (0915:8101)
enter device to probe (1-4): 4
cannot find /usr/local/bin/eciadsl-firmware in $PATH, test mode assumed
probing, please wait..
your USB devices now:
1: nVidia Corporation nForce2 USB Controller / Linux 2.6.12-9-386 ehci_hcd
(:)
2: nVidia Corporation nForce2 USB Controller (#2) / Linux
2.6.12-9-386ohci_hcd (:)
3: nVidia Corporation nForce2 USB Controller / Linux 2.6.12-9-386 ohci_hcd
(:)
4: USB-ADSL Modem / GlobeSpan Inc. (0915:8101)
probed USB device: USB-ADSL Modem / GlobeSpan Inc.
VID1=0915, PID1=8101
VID2=0915, PID2=8101
Did you really unplug/replug your modem before launching this script?
end of output
---end of email message-
--
Puneet
___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
