Re: [Intel-gfx] [PATCH] i915/perf: Avoid reading OA reports before they land
On Tue, May 23, 2023 at 11:20:54AM -0700, Dixit, Ashutosh wrote: On Mon, 22 May 2023 15:08:42 -0700, Umesh Nerlige Ramappa wrote: Hi Umesh, On Mon, May 22, 2023 at 01:20:12PM -0700, Dixit, Ashutosh wrote: > On Fri, 19 May 2023 15:56:42 -0700, Umesh Nerlige Ramappa wrote: >> >> On DG2, capturing OA reports while running heavy render workloads >> sometimes results in invalid OA reports where 64-byte chunks inside >> reports have stale values. Under memory pressure, high OA sampling rates >> (13.3 us) and heavy render workload, occassionally, the OA HW TAIL >> pointer does not progress as fast as the sampling rate. When these >> glitches occur, the TAIL pointer takes approx. 200us to progress. While >> this is expected behavior from the HW perspective, invalid reports are >> not expected. >> >> In oa_buffer_check_unlocked(), when we execute the if condition, we are >> updating the oa_buffer.tail to the aging tail and then setting pollin >> based on this tail value, however, we do not have a chance to rewind and >> validate the reports prior to setting pollin. The validation happens >> in a subsequent call to oa_buffer_check_unlocked(). If a read occurs >> before this validation, then we end up reading reports up until this >> oa_buffer.tail value which includes invalid reports. Though found on >> DG2, this affects all platforms. >> >> Set the pollin only in the else condition in oa_buffer_check_unlocked. >> >> Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7484 >> Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7757 >> Signed-off-by: Umesh Nerlige Ramappa >> --- >> drivers/gpu/drm/i915/i915_perf.c | 8 >> 1 file changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c >> index 19d5652300ee..61536e3c4ac9 100644 >> --- a/drivers/gpu/drm/i915/i915_perf.c >> +++ b/drivers/gpu/drm/i915/i915_perf.c >> @@ -545,7 +545,7 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream) >>u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma); >>int report_size = stream->oa_buffer.format->size; >>unsigned long flags; >> - bool pollin; >> + bool pollin = false; >>u32 hw_tail; >>u64 now; >>u32 partial_report_size; >> @@ -620,10 +620,10 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream) >>stream->oa_buffer.tail = gtt_offset + tail; >>stream->oa_buffer.aging_tail = gtt_offset + hw_tail; >>stream->oa_buffer.aging_timestamp = now; >> - } >> >> - pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, >> -stream->oa_buffer.head - gtt_offset) >= report_size; >> + pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, >> +stream->oa_buffer.head - gtt_offset) >= report_size; >> + } > > The issue has been correctly identified above. But seems that the real > cause for the issue is not that pollin statement above is misplaced but > that updating the tail via aging is unreliable (at least with the present > timeout as you mention above). Also, it is not clear why we have tail aging > at all, since it seems we can detect when reports land (by checking > report_id and timestamp). So rather than move the pollin into the else, we > should just eliminate the if () part. And if we are eliminating the if () > we can just eliminate the concept of tail aging from the code (and > comments) and rely solely on explicit detection of reports landing. I missed this yesterday but the above patch is basically incorrect. We need to return pollin true when we have a "non-zero distance between head and tail", i.e. when there is data to be read. And we have violated this for the if () part with this patch (because we are unconditionally returning false from the if () even when there is data to be read). So there are only two ways to solve this: Yikes, didn't see that. Ideally if the tail did progress the first time we entered this function, then let's say pollin is true since we find some valid reports. If the tail hasn't moved when the function is entered second time, then we return false (which is wrong) since there may still be data to be read. a. Increase OA_TAIL_MARGIN_NSEC (the aging time) b. Eliminate tail aging (i.e. eliminate the if ()) We cannot move the pollin statement into the else. The preferred way is b. since it makes the overall code consistent again. And it seems easy enough to do. I thought so too, it would be much simpler code. Looks like Lionel agrees with removing this code as well. I do have a couple concerns though. - In the blocking case, i915_perf_read() path waits on a queue with the condition being oa_buffer_check_unlocked(). If sampling rate is high, oa_buffer_check_unlocked will almost always return true. If we remove the if block, we may run the rewind logic too often to detect rep
Re: [Intel-gfx] [PATCH] i915/perf: Avoid reading OA reports before they land
On Mon, 22 May 2023 15:08:42 -0700, Umesh Nerlige Ramappa wrote: > Hi Umesh, > On Mon, May 22, 2023 at 01:20:12PM -0700, Dixit, Ashutosh wrote: > > On Fri, 19 May 2023 15:56:42 -0700, Umesh Nerlige Ramappa wrote: > >> > >> On DG2, capturing OA reports while running heavy render workloads > >> sometimes results in invalid OA reports where 64-byte chunks inside > >> reports have stale values. Under memory pressure, high OA sampling rates > >> (13.3 us) and heavy render workload, occassionally, the OA HW TAIL > >> pointer does not progress as fast as the sampling rate. When these > >> glitches occur, the TAIL pointer takes approx. 200us to progress. While > >> this is expected behavior from the HW perspective, invalid reports are > >> not expected. > >> > >> In oa_buffer_check_unlocked(), when we execute the if condition, we are > >> updating the oa_buffer.tail to the aging tail and then setting pollin > >> based on this tail value, however, we do not have a chance to rewind and > >> validate the reports prior to setting pollin. The validation happens > >> in a subsequent call to oa_buffer_check_unlocked(). If a read occurs > >> before this validation, then we end up reading reports up until this > >> oa_buffer.tail value which includes invalid reports. Though found on > >> DG2, this affects all platforms. > >> > >> Set the pollin only in the else condition in oa_buffer_check_unlocked. > >> > >> Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7484 > >> Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7757 > >> Signed-off-by: Umesh Nerlige Ramappa > >> --- > >> drivers/gpu/drm/i915/i915_perf.c | 8 > >> 1 file changed, 4 insertions(+), 4 deletions(-) > >> > >> diff --git a/drivers/gpu/drm/i915/i915_perf.c > >> b/drivers/gpu/drm/i915/i915_perf.c > >> index 19d5652300ee..61536e3c4ac9 100644 > >> --- a/drivers/gpu/drm/i915/i915_perf.c > >> +++ b/drivers/gpu/drm/i915/i915_perf.c > >> @@ -545,7 +545,7 @@ static bool oa_buffer_check_unlocked(struct > >> i915_perf_stream *stream) > >>u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma); > >>int report_size = stream->oa_buffer.format->size; > >>unsigned long flags; > >> - bool pollin; > >> + bool pollin = false; > >>u32 hw_tail; > >>u64 now; > >>u32 partial_report_size; > >> @@ -620,10 +620,10 @@ static bool oa_buffer_check_unlocked(struct > >> i915_perf_stream *stream) > >>stream->oa_buffer.tail = gtt_offset + tail; > >>stream->oa_buffer.aging_tail = gtt_offset + hw_tail; > >>stream->oa_buffer.aging_timestamp = now; > >> - } > >> > >> - pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, > >> -stream->oa_buffer.head - gtt_offset) >= report_size; > >> + pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, > >> +stream->oa_buffer.head - gtt_offset) >= > >> report_size; > >> + } > > > > The issue has been correctly identified above. But seems that the real > > cause for the issue is not that pollin statement above is misplaced but > > that updating the tail via aging is unreliable (at least with the present > > timeout as you mention above). Also, it is not clear why we have tail aging > > at all, since it seems we can detect when reports land (by checking > > report_id and timestamp). So rather than move the pollin into the else, we > > should just eliminate the if () part. And if we are eliminating the if () > > we can just eliminate the concept of tail aging from the code (and > > comments) and rely solely on explicit detection of reports landing. I missed this yesterday but the above patch is basically incorrect. We need to return pollin true when we have a "non-zero distance between head and tail", i.e. when there is data to be read. And we have violated this for the if () part with this patch (because we are unconditionally returning false from the if () even when there is data to be read). So there are only two ways to solve this: a. Increase OA_TAIL_MARGIN_NSEC (the aging time) b. Eliminate tail aging (i.e. eliminate the if ()) We cannot move the pollin statement into the else. The preferred way is b. since it makes the overall code consistent again. And it seems easy enough to do. > I thought so too, it would be much simpler code. Looks like Lionel agrees > with removing this code as well. > I do have a couple concerns though. > > - In the blocking case, i915_perf_read() path waits on a queue with the > condition being oa_buffer_check_unlocked(). If sampling rate is high, > oa_buffer_check_unlocked will almost always return true. If we remove the > if block, we may run the rewind logic too often to detect reports that > landed. The aging logic is just giving a 100us buffer to avoid repeated > checks here if tail hasn't moved. (although tbh, 100 us is very small). I am pretty sure if we eliminate tail aging, we would fairly easily be able to solve the problem of rewind logic running too often (e.g
Re: [Intel-gfx] [PATCH] i915/perf: Avoid reading OA reports before they land
On Mon, May 22, 2023 at 01:20:12PM -0700, Dixit, Ashutosh wrote: On Fri, 19 May 2023 15:56:42 -0700, Umesh Nerlige Ramappa wrote: Hi Umesh, On DG2, capturing OA reports while running heavy render workloads sometimes results in invalid OA reports where 64-byte chunks inside reports have stale values. Under memory pressure, high OA sampling rates (13.3 us) and heavy render workload, occassionally, the OA HW TAIL pointer does not progress as fast as the sampling rate. When these glitches occur, the TAIL pointer takes approx. 200us to progress. While this is expected behavior from the HW perspective, invalid reports are not expected. In oa_buffer_check_unlocked(), when we execute the if condition, we are updating the oa_buffer.tail to the aging tail and then setting pollin based on this tail value, however, we do not have a chance to rewind and validate the reports prior to setting pollin. The validation happens in a subsequent call to oa_buffer_check_unlocked(). If a read occurs before this validation, then we end up reading reports up until this oa_buffer.tail value which includes invalid reports. Though found on DG2, this affects all platforms. Set the pollin only in the else condition in oa_buffer_check_unlocked. Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7484 Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7757 Signed-off-by: Umesh Nerlige Ramappa --- drivers/gpu/drm/i915/i915_perf.c | 8 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 19d5652300ee..61536e3c4ac9 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -545,7 +545,7 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream) u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma); int report_size = stream->oa_buffer.format->size; unsigned long flags; - bool pollin; + bool pollin = false; u32 hw_tail; u64 now; u32 partial_report_size; @@ -620,10 +620,10 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream) stream->oa_buffer.tail = gtt_offset + tail; stream->oa_buffer.aging_tail = gtt_offset + hw_tail; stream->oa_buffer.aging_timestamp = now; - } - pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, - stream->oa_buffer.head - gtt_offset) >= report_size; + pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, + stream->oa_buffer.head - gtt_offset) >= report_size; + } The issue has been correctly identified above. But seems that the real cause for the issue is not that pollin statement above is misplaced but that updating the tail via aging is unreliable (at least with the present timeout as you mention above). Also, it is not clear why we have tail aging at all, since it seems we can detect when reports land (by checking report_id and timestamp). So rather than move the pollin into the else, we should just eliminate the if () part. And if we are eliminating the if () we can just eliminate the concept of tail aging from the code (and comments) and rely solely on explicit detection of reports landing. I thought so too, it would be much simpler code. Looks like Lionel agrees with removing this code as well. I do have a couple concerns though. - In the blocking case, i915_perf_read() path waits on a queue with the condition being oa_buffer_check_unlocked(). If sampling rate is high, oa_buffer_check_unlocked will almost always return true. If we remove the if block, we may run the rewind logic too often to detect reports that landed. The aging logic is just giving a 100us buffer to avoid repeated checks here if tail hasn't moved. (although tbh, 100 us is very small). - The other concern - by dropping all this aging logic, are we changing underlying behavior? - Is there a significant ROI on current patch vs. dropping all the aging logic? Separately, there seems to be another related bug in the code, I have sent a patch for that here: https://patchwork.freedesktop.org/series/118151/ That's a valid new issue and different from this one, but related to the rewind logic. lgtm. Thanks, Umesh Thanks. -- Ashutosh
Re: [Intel-gfx] [PATCH] i915/perf: Avoid reading OA reports before they land
On Fri, 19 May 2023 15:56:42 -0700, Umesh Nerlige Ramappa wrote: > Hi Umesh, > On DG2, capturing OA reports while running heavy render workloads > sometimes results in invalid OA reports where 64-byte chunks inside > reports have stale values. Under memory pressure, high OA sampling rates > (13.3 us) and heavy render workload, occassionally, the OA HW TAIL > pointer does not progress as fast as the sampling rate. When these > glitches occur, the TAIL pointer takes approx. 200us to progress. While > this is expected behavior from the HW perspective, invalid reports are > not expected. > > In oa_buffer_check_unlocked(), when we execute the if condition, we are > updating the oa_buffer.tail to the aging tail and then setting pollin > based on this tail value, however, we do not have a chance to rewind and > validate the reports prior to setting pollin. The validation happens > in a subsequent call to oa_buffer_check_unlocked(). If a read occurs > before this validation, then we end up reading reports up until this > oa_buffer.tail value which includes invalid reports. Though found on > DG2, this affects all platforms. > > Set the pollin only in the else condition in oa_buffer_check_unlocked. > > Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7484 > Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7757 > Signed-off-by: Umesh Nerlige Ramappa > --- > drivers/gpu/drm/i915/i915_perf.c | 8 > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_perf.c > b/drivers/gpu/drm/i915/i915_perf.c > index 19d5652300ee..61536e3c4ac9 100644 > --- a/drivers/gpu/drm/i915/i915_perf.c > +++ b/drivers/gpu/drm/i915/i915_perf.c > @@ -545,7 +545,7 @@ static bool oa_buffer_check_unlocked(struct > i915_perf_stream *stream) > u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma); > int report_size = stream->oa_buffer.format->size; > unsigned long flags; > - bool pollin; > + bool pollin = false; > u32 hw_tail; > u64 now; > u32 partial_report_size; > @@ -620,10 +620,10 @@ static bool oa_buffer_check_unlocked(struct > i915_perf_stream *stream) > stream->oa_buffer.tail = gtt_offset + tail; > stream->oa_buffer.aging_tail = gtt_offset + hw_tail; > stream->oa_buffer.aging_timestamp = now; > - } > > - pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, > - stream->oa_buffer.head - gtt_offset) >= report_size; > + pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, > + stream->oa_buffer.head - gtt_offset) >= > report_size; > + } The issue has been correctly identified above. But seems that the real cause for the issue is not that pollin statement above is misplaced but that updating the tail via aging is unreliable (at least with the present timeout as you mention above). Also, it is not clear why we have tail aging at all, since it seems we can detect when reports land (by checking report_id and timestamp). So rather than move the pollin into the else, we should just eliminate the if () part. And if we are eliminating the if () we can just eliminate the concept of tail aging from the code (and comments) and rely solely on explicit detection of reports landing. Separately, there seems to be another related bug in the code, I have sent a patch for that here: https://patchwork.freedesktop.org/series/118151/ Thanks. -- Ashutosh
Re: [Intel-gfx] [PATCH] i915/perf: Avoid reading OA reports before they land
Hi Umesh, Looks like there is still a problem with the if block moving the stream->oa_buffer.tail forward. An application not doing any polling would still run into the same problem. If I understand correctly this change, it means the time based workaround doesn't work. We need to actually check the report's content before moving the software tracked tail. If that's the case, they maybe we should just delete that code. -Lionel On 20/05/2023 01:56, Umesh Nerlige Ramappa wrote: On DG2, capturing OA reports while running heavy render workloads sometimes results in invalid OA reports where 64-byte chunks inside reports have stale values. Under memory pressure, high OA sampling rates (13.3 us) and heavy render workload, occassionally, the OA HW TAIL pointer does not progress as fast as the sampling rate. When these glitches occur, the TAIL pointer takes approx. 200us to progress. While this is expected behavior from the HW perspective, invalid reports are not expected. In oa_buffer_check_unlocked(), when we execute the if condition, we are updating the oa_buffer.tail to the aging tail and then setting pollin based on this tail value, however, we do not have a chance to rewind and validate the reports prior to setting pollin. The validation happens in a subsequent call to oa_buffer_check_unlocked(). If a read occurs before this validation, then we end up reading reports up until this oa_buffer.tail value which includes invalid reports. Though found on DG2, this affects all platforms. Set the pollin only in the else condition in oa_buffer_check_unlocked. Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7484 Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7757 Signed-off-by: Umesh Nerlige Ramappa --- drivers/gpu/drm/i915/i915_perf.c | 8 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 19d5652300ee..61536e3c4ac9 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -545,7 +545,7 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream) u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma); int report_size = stream->oa_buffer.format->size; unsigned long flags; - bool pollin; + bool pollin = false; u32 hw_tail; u64 now; u32 partial_report_size; @@ -620,10 +620,10 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream) stream->oa_buffer.tail = gtt_offset + tail; stream->oa_buffer.aging_tail = gtt_offset + hw_tail; stream->oa_buffer.aging_timestamp = now; - } - pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, - stream->oa_buffer.head - gtt_offset) >= report_size; + pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, + stream->oa_buffer.head - gtt_offset) >= report_size; + } spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
[Intel-gfx] [PATCH] i915/perf: Avoid reading OA reports before they land
On DG2, capturing OA reports while running heavy render workloads sometimes results in invalid OA reports where 64-byte chunks inside reports have stale values. Under memory pressure, high OA sampling rates (13.3 us) and heavy render workload, occassionally, the OA HW TAIL pointer does not progress as fast as the sampling rate. When these glitches occur, the TAIL pointer takes approx. 200us to progress. While this is expected behavior from the HW perspective, invalid reports are not expected. In oa_buffer_check_unlocked(), when we execute the if condition, we are updating the oa_buffer.tail to the aging tail and then setting pollin based on this tail value, however, we do not have a chance to rewind and validate the reports prior to setting pollin. The validation happens in a subsequent call to oa_buffer_check_unlocked(). If a read occurs before this validation, then we end up reading reports up until this oa_buffer.tail value which includes invalid reports. Though found on DG2, this affects all platforms. Set the pollin only in the else condition in oa_buffer_check_unlocked. Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7484 Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7757 Signed-off-by: Umesh Nerlige Ramappa --- drivers/gpu/drm/i915/i915_perf.c | 8 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 19d5652300ee..61536e3c4ac9 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -545,7 +545,7 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream) u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma); int report_size = stream->oa_buffer.format->size; unsigned long flags; - bool pollin; + bool pollin = false; u32 hw_tail; u64 now; u32 partial_report_size; @@ -620,10 +620,10 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream) stream->oa_buffer.tail = gtt_offset + tail; stream->oa_buffer.aging_tail = gtt_offset + hw_tail; stream->oa_buffer.aging_timestamp = now; - } - pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, - stream->oa_buffer.head - gtt_offset) >= report_size; + pollin = OA_TAKEN(stream->oa_buffer.tail - gtt_offset, + stream->oa_buffer.head - gtt_offset) >= report_size; + } spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags); -- 2.38.1