Subtests now forcibly call or request igt_abort on failures in order to
avoid silently leaving an exercised device in an unusable state.
However, a failure inside a subtest doesn't always mean the device is
no longer working correctly and reboot is needed. On the other hand,
if a subtest just fails without aborting, that doesn't mean in turn the
device is healthy. We should still perform a device health check
in that case before deciding on next steps.
Reuse the 'failure' structure field as a mark which is set before each
critical operation is executed that must be followed by a successful
health check in order to avoid aborting the test. Then, follow each
subtest with its individual igt_fixture section, from where device file
descriptors potentially left open are closed, device rediscover or
driver rebing operation is run as needed, and finally the health check
is run again if the preceding igt_subtest section has exited with the
marker set.
v2: Start each recovery phase from unconditionally closing file
descriptors potentially left open by a subtest before it entered
its critical section,
- replace igt_require() with 'if() return;' construct in recover() to
reduce noise,
- replace "subtest failure" message used as a request for healthcheck
with a more appropriate "need healthcheck" for clarity,
- rebase on current upstream master.
v3: Refresh,
- move bus_rescan() and driver_bind() function calls back from
heaalthcheck() to recover() so a pure health check can still be
called from a subtest if essential,
- move failure mark assignments back from subtests to helpers for
more adequate abort reason reporting but clean the mark only on
health check success,
- call cleanup() also from post_healthcheck() in order to close a
device file descriptor potentially left open by a failed health
check,
- reword commit message and update description.
v4: Close exercised device fd before failing a health check run,
- don't drop health checks from subtest bodies, their results should
always matter.
Signed-off-by: Janusz Krzysztofik <janusz.krzyszto...@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiar...@intel.com> # v1
---
tests/core_hotunplug.c | 100 ++++++++++++++++++++++++++++++-----------
1 file changed, 74 insertions(+), 26 deletions(-)
diff --git a/tests/core_hotunplug.c b/tests/core_hotunplug.c
index 25508db85..b72361900 100644
--- a/tests/core_hotunplug.c
+++ b/tests/core_hotunplug.c
@@ -69,6 +69,9 @@ static int local_drm_open_driver(const char *prefix, const
char *suffix)
static int local_close(int fd, const char *message)
{
+ if (fd < 0) /* not open - return current status */
+ return fd;
+
errno = 0;
if (igt_warn_on_f(close(fd), "%s\n", message))
return -errno; /* (never -1) */
@@ -116,24 +119,22 @@ static void prepare(struct hotunplug *priv)
static void driver_unbind(struct hotunplug *priv, const char *prefix)
{
igt_debug("%sunbinding the driver from the device\n", prefix);
+ priv->failure = "Driver unbind failure!";
- priv->failure = "Driver unbind timeout!";
- igt_set_timeout(60, priv->failure);
+ igt_set_timeout(60, "Driver unbind timeout!");
igt_sysfs_set(priv->fd.sysfs_drv, "unbind", priv->dev_bus_addr);
igt_reset_timeout();
- priv->failure = NULL;
}
/* Re-bind the driver to the device */
static void driver_bind(struct hotunplug *priv)
{
igt_debug("rebinding the driver to the device\n");
+ priv->failure = "Driver re-bind failure!";
- priv->failure = "Driver re-bind timeout!";
- igt_set_timeout(60, priv->failure);
+ igt_set_timeout(60, "Driver re-bind timeout!");
igt_sysfs_set(priv->fd.sysfs_drv, "bind", priv->dev_bus_addr);
igt_reset_timeout();
- priv->failure = NULL;
}
/* Remove (virtually unplug) the device from its bus */
@@ -146,12 +147,11 @@ static void device_unplug(struct hotunplug *priv, const
char *prefix)
igt_assert_fd(priv->fd.sysfs_dev);
igt_debug("%sunplugging the device\n", prefix);
+ priv->failure = "Device unplug failure!";
- priv->failure = "Device unplug timeout!";
- igt_set_timeout(60, priv->failure);
+ igt_set_timeout(60, "Device unplug timeout!");
igt_sysfs_set(priv->fd.sysfs_dev, "remove", "1");
igt_reset_timeout();
- priv->failure = NULL;
priv->fd.sysfs_dev = close_sysfs(priv->fd.sysfs_dev);
}
@@ -160,17 +160,23 @@ static void device_unplug(struct hotunplug *priv, const
char *prefix)
static void bus_rescan(struct hotunplug *priv)
{
igt_debug("rediscovering the device\n");
+ priv->failure = "Bus rescan failure!";
- priv->failure = "Bus rescan timeout!";
- igt_set_timeout(60, priv->failure);
+ igt_set_timeout(60, "Bus rescan timeout!");
igt_sysfs_set(priv->fd.sysfs_bus, "../rescan", "1");
igt_reset_timeout();
- priv->failure = NULL;
+}
+
+static void cleanup(struct hotunplug *priv)
+{
+ priv->fd.drm = close_device(priv->fd.drm);
+ priv->fd.sysfs_dev = close_sysfs(priv->fd.sysfs_dev);
}
static void healthcheck(struct hotunplug *priv)
{
/* preserve error code potentially stored before in priv->fd.drm */
+ bool closed = priv->fd.drm == -1;
int fd_drm;
/* device name may have changed, rebuild IGT device list */
@@ -178,23 +184,45 @@ static void healthcheck(struct hotunplug *priv)
priv->failure = "Device reopen failure!";
fd_drm = local_drm_open_driver("re", " for healthcheck");
- priv->failure = NULL;
+ if (closed) /* store for cleanup if no error code to preserve */
+ priv->fd.drm = fd_drm;
if (is_i915_device(fd_drm)) {
priv->failure = "GEM failure";
igt_require_gem(fd_drm);
priv->failure = NULL;
+ } else {
+ /* no device specific healthcheck, rely on reopen result */
+ priv->failure = NULL;
}
fd_drm = close_device(fd_drm);
- if (priv->fd.drm == -1) /* store result if no error code to preserve */
+ if (closed) /* store result if no error code to preserve */
priv->fd.drm = fd_drm;
+
+ /* not only request igt_abort on failure, also fail the health check */
+ igt_fail_on_f(priv->failure, "%s\n", priv->failure);
+}
+
+static void recover(struct hotunplug *priv)
+{
+ cleanup(priv);
+
+ if (faccessat(priv->fd.sysfs_bus, priv->dev_bus_addr, F_OK, 0))
+ bus_rescan(priv);
+
+ else if (faccessat(priv->fd.sysfs_drv, priv->dev_bus_addr, F_OK, 0))
+ driver_bind(priv);
+
+ if (priv->failure)
+ healthcheck(priv);
}
static void post_healthcheck(struct hotunplug *priv)
{
igt_abort_on_f(priv->failure, "%s\n", priv->failure);
+ cleanup(priv);
igt_require(priv->fd.drm == -1);
}
@@ -295,30 +323,50 @@ igt_main
prepare(&priv);
}
- igt_describe("Check if the driver can be cleanly unbound from a device
believed to be closed");
- igt_subtest("unbind-rebind")
- unbind_rebind(&priv);
+ igt_subtest_group {
+ igt_describe("Check if the driver can be cleanly unbound from a
device believed to be closed");
+ igt_subtest("unbind-rebind")
+ unbind_rebind(&priv);
+
+ igt_fixture
+ recover(&priv);
+ }
igt_fixture
post_healthcheck(&priv);
- igt_describe("Check if a device believed to be closed can be cleanly
unplugged");
- igt_subtest("unplug-rescan")
- unplug_rescan(&priv);
+ igt_subtest_group {
+ igt_describe("Check if a device believed to be closed can be
cleanly unplugged");
+ igt_subtest("unplug-rescan")
+ unplug_rescan(&priv);
+
+ igt_fixture
+ recover(&priv);
+ }
igt_fixture
post_healthcheck(&priv);
- igt_describe("Check if the driver can be cleanly unbound from a still
open device, then released");
- igt_subtest("hotunbind-lateclose")
- hotunbind_lateclose(&priv);
+ igt_subtest_group {
+ igt_describe("Check if the driver can be cleanly unbound from a
still open device, then released");
+ igt_subtest("hotunbind-lateclose")
+ hotunbind_lateclose(&priv);
+
+ igt_fixture
+ recover(&priv);
+ }
igt_fixture
post_healthcheck(&priv);
- igt_describe("Check if a still open device can be cleanly unplugged,
then released");
- igt_subtest("hotunplug-lateclose")
- hotunplug_lateclose(&priv);
+ igt_subtest_group {
+ igt_describe("Check if a still open device can be cleanly
unplugged, then released");
+ igt_subtest("hotunplug-lateclose")
+ hotunplug_lateclose(&priv);
+
+ igt_fixture
+ recover(&priv);
+ }
igt_fixture {
post_healthcheck(&priv);
--
2.21.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
