Re: [IRCA] phasing units, then and now

[Andrew Ikin]

Hello Guy,

You have raised an interesting question ref. using dual channel SDR for 
phasing. These may in future afford an alternative to some expensive 
commercial phasers. Also the SDR has the option of offering a fixed phase 
over a very wide bandwidth. This could be useful for phasing two orthogonal 
loops to provide omni-direction or with a loop + a resistance loaded 
longwire for a wideband cardioid pattern.

However, like most other phasing schemes the SDR cannot provide a null over 
a wide bandwidth when used say with similar antenna pairs. This can only be 
done with a special Phased array controller when the two endfire antennas 
are run in anti-phase with a delay-line. This phasing also requires a design 
that has zero interaction on the antenna inputs verses phasing/amplitude 
adjustments.

One interesting phaser that may have been overlooked was designed by the 
Late Graham Maynard in the late 1980s. He used a variable delayline to 
provide a 90 degree phase shift with a fixed 180 degree phase reversal 
transformer switched in 4 quadrants to  provide 0-360 degree phasing. The 
advantage of this scheme was a wider null bandwidth as it could be used for 
an endfire array too.

73

Andrew  Ikin






___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

Re: [IRCA] phasing units, then and now

[Chuck Hutton]

Guy:


I've ben told the AFEDRI native software and HDSDR both support phasing. I have 
two problems with the AFEDRI: (1) it only records 600 kHz spans, and (2) 
phasing can only be done live. There's no way I know of to do phasing on 
recorded files.  This is a shortcomimng that no one has solved for any SDR, as 
best I know.



Chuck


From: IRCA  on behalf of Guy Atkins 

Sent: Monday, July 9, 2018 11:59 AM
To: Mailing list for the International Radio Club of America
Subject: Re: [IRCA] phasing units, then and now

Hi Mark,

That was an excellent overview of DX hobbyist use of phasers! You covered
the early history which I wasn't aware of, as I was mostly DXing on the
tropical bands when Gordon Nelson and others did their pioneering work.

There is one more phase (LoL) developing now--software based methods using
coherent dual tuners (or channels). I'm sure you're aware of Afedri's AFE822x
SDR-Net device
<http://www.afedri-sdr.com/index.php/new-afe822x-sdr-net-dual-channel>. It
AFE822x SDR-Net (Dual 
Channel)<http://www.afedri-sdr.com/index.php/new-afe822x-sdr-net-dual-channel>
www.afedri-sdr.com
AFE822x SDR-Net ( Dual Channel ) Features Synchronized (diversity) or separated 
(independent) Dual Channel reception mode 100 kHz to 30.00MHz continuous 
frequency range



was introduced a couple of years ago, but unfortunately software has not
appeared to easily take advantage of phasing. If you jump through a lot of
hoops and complexities with LINRAD, you can catch a glimpse of the future
of software phasing, but it's nothing practical for a DXer's use in my
opinion.

Much more recently, SDRplay's RSPduo <https://www.sdrplay.com/rspduo/> was
introduced with its dual tuners. I have one myself, mainly for its future
possibilities. I'm hoping that the 14-bit structure and additional front
end filters will provide better basic performance than earlier RSP models
I've owned.I expect it to be neck-and-neck with the AirSpy HF+ SDRs in a
quiet DXpedition setting...maybe not so much in my suburban RF jungle.

SDRplay looks to be the most active of all the SDR software developers, and
they say they fully intend to offer phasing features in a future release of
SDRuno software. Their activity, enthusiasm, and customer support make me
think they are the group most likely to take software phasing out of the
laboratory and into the DXer's shack. If he has the time and inclination,
Simon Brown of SDR-Console software could implement RSPduo phasing too, but
he's *not* dropped any hints about this.

73,

Guy Atkins
Puyallup, WA
___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

Re: [IRCA] phasing units, then and now

[Don Moman VE6JY]

The ANAN Sdr series has phasing capability with control built into the
graphical interface.

Don
VE6JY

On Mon, Jul 9, 2018 at 7:06 PM Les Rayburn  wrote:

> Guy,
>
> I own an SDRPlay RSP-1 Pro and an RSP-2 Pro, still waiting to install them
> and experiment with SDRUno. My plan was to be set up to record the entire
> FM band on I/Q output for this season, but that hasn’t happened yet.
>
> I’m also eying the SDRDuo for the phasing possibilities. This is
> intriguing for both AM and FM DXing and I hope they implement this option
> in the software soon. Also hopeful that Simon will implement this option in
> SDR-Console at some point in the future. How that guy keeps up is beyond
> me!
>
>
>
>
> 73,
>
> Les Rayburn, N1LF
> 121 Mayfair Park
> Maylene, AL 35114
> EM63nf
>
> Member WTFDA, IRCA, NRC. Former CPC Chairman for NRC & IRCA.
>
> Elad FDM-S2 SDR, AirSpy SDR2, SDRPlay RSP-2 Pro, Sony XDR-F1HD, Dennon
> TU-1500RD, Sangean HDT-1, Ray Dees RDS Decoders,
> Korner 9.2 Antenna, FM-6 Antenna, Quantum Phaser, Wellbrook ALA1530 Loop,
> Wellbrook Flag, Clifton Labs Active Whip.
>
> “Nothing but blues and Elvis, and somebody else’s favorite song…”
>
>
> > On Jul 9, 2018, at 1:59 PM, Guy Atkins  wrote:
> >
> > Hi Mark,
> >
> > That was an excellent overview of DX hobbyist use of phasers! You covered
> > the early history which I wasn't aware of, as I was mostly DXing on the
> > tropical bands when Gordon Nelson and others did their pioneering work.
> >
> > There is one more phase (LoL) developing now--software based methods
> using
> > coherent dual tuners (or channels).​ I'm sure you're aware of Afedri's
> AFE822x
> > SDR-Net device
> > .
> It
> > was introduced a couple of years ago, but unfortunately software has not
> > appeared to easily take advantage of phasing. If you jump through a lot
> of
> > hoops and complexities with LINRAD, you can catch a glimpse of the future
> > of software phasing, but it's nothing practical for a DXer's use in my
> > opinion.
> >
> > Much more recently, SDRplay's RSPduo 
> was
> > introduced with its dual tuners. I have one myself, mainly for its future
> > possibilities. I'm hoping that the 14-bit structure and additional front
> > end filters will provide better basic performance than earlier RSP models
> > I've owned.I expect it to be neck-and-neck with the AirSpy HF+ SDRs in a
> > quiet DXpedition setting...maybe not so much in my suburban RF jungle.
> >
> > SDRplay looks to be the most active of all the SDR software developers,
> and
> > they say they fully intend to offer phasing features in a future release
> of
> > SDRuno software. Their activity, enthusiasm, and customer support make me
> > think they are the group most likely to take software phasing out of the
> > laboratory and into the DXer's shack. If he has the time and inclination,
> > Simon Brown of SDR-Console software could implement RSPduo phasing too,
> but
> > he's *not* dropped any hints about this.
> >
> > 73,
> >
> > Guy Atkins
> > Puyallup, WA
> > ___
> > IRCA mailing list
> > IRCA@hard-core-dx.com
> > http://montreal.kotalampi.com/mailman/listinfo/irca
> >
> > Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
> >
> > For more information: http://www.ircaonline.org
> >
> > To Post a message: irca@hard-core-dx.com
> >
>
> ___
> IRCA mailing list
> IRCA@hard-core-dx.com
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@hard-core-dx.com
>
>
___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

Re: [IRCA] phasing units, then and now

[Les Rayburn]

Guy,

I own an SDRPlay RSP-1 Pro and an RSP-2 Pro, still waiting to install them and 
experiment with SDRUno. My plan was to be set up to record the entire FM band 
on I/Q output for this season, but that hasn’t happened yet. 

I’m also eying the SDRDuo for the phasing possibilities. This is intriguing for 
both AM and FM DXing and I hope they implement this option in the software 
soon. Also hopeful that Simon will implement this option in SDR-Console at some 
point in the future. How that guy keeps up is beyond me! 




73,

Les Rayburn, N1LF
121 Mayfair Park
Maylene, AL 35114
EM63nf

Member WTFDA, IRCA, NRC. Former CPC Chairman for NRC & IRCA. 

Elad FDM-S2 SDR, AirSpy SDR2, SDRPlay RSP-2 Pro, Sony XDR-F1HD, Dennon 
TU-1500RD, Sangean HDT-1, Ray Dees RDS Decoders,
Korner 9.2 Antenna, FM-6 Antenna, Quantum Phaser, Wellbrook ALA1530 Loop, 
Wellbrook Flag, Clifton Labs Active Whip. 

“Nothing but blues and Elvis, and somebody else’s favorite song…” 


> On Jul 9, 2018, at 1:59 PM, Guy Atkins  wrote:
> 
> Hi Mark,
> 
> That was an excellent overview of DX hobbyist use of phasers! You covered
> the early history which I wasn't aware of, as I was mostly DXing on the
> tropical bands when Gordon Nelson and others did their pioneering work.
> 
> There is one more phase (LoL) developing now--software based methods using
> coherent dual tuners (or channels).​ I'm sure you're aware of Afedri's AFE822x
> SDR-Net device
> . It
> was introduced a couple of years ago, but unfortunately software has not
> appeared to easily take advantage of phasing. If you jump through a lot of
> hoops and complexities with LINRAD, you can catch a glimpse of the future
> of software phasing, but it's nothing practical for a DXer's use in my
> opinion.
> 
> Much more recently, SDRplay's RSPduo  was
> introduced with its dual tuners. I have one myself, mainly for its future
> possibilities. I'm hoping that the 14-bit structure and additional front
> end filters will provide better basic performance than earlier RSP models
> I've owned.I expect it to be neck-and-neck with the AirSpy HF+ SDRs in a
> quiet DXpedition setting...maybe not so much in my suburban RF jungle.
> 
> SDRplay looks to be the most active of all the SDR software developers, and
> they say they fully intend to offer phasing features in a future release of
> SDRuno software. Their activity, enthusiasm, and customer support make me
> think they are the group most likely to take software phasing out of the
> laboratory and into the DXer's shack. If he has the time and inclination,
> Simon Brown of SDR-Console software could implement RSPduo phasing too, but
> he's *not* dropped any hints about this.
> 
> 73,
> 
> Guy Atkins
> Puyallup, WA
> ___
> IRCA mailing list
> IRCA@hard-core-dx.com
> http://montreal.kotalampi.com/mailman/listinfo/irca
> 
> Opinions expressed in messages on this mailing list are those of the original 
> contributors and do not necessarily reflect the opinion of the IRCA, its 
> editors, publishing staff, or officers
> 
> For more information: http://www.ircaonline.org
> 
> To Post a message: irca@hard-core-dx.com
> 

___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

Re: [IRCA] phasing units, then and now

[Guy Atkins]

Hi Mark,

That was an excellent overview of DX hobbyist use of phasers! You covered
the early history which I wasn't aware of, as I was mostly DXing on the
tropical bands when Gordon Nelson and others did their pioneering work.

There is one more phase (LoL) developing now--software based methods using
coherent dual tuners (or channels).​ I'm sure you're aware of Afedri's AFE822x
SDR-Net device
. It
was introduced a couple of years ago, but unfortunately software has not
appeared to easily take advantage of phasing. If you jump through a lot of
hoops and complexities with LINRAD, you can catch a glimpse of the future
of software phasing, but it's nothing practical for a DXer's use in my
opinion.

Much more recently, SDRplay's RSPduo  was
introduced with its dual tuners. I have one myself, mainly for its future
possibilities. I'm hoping that the 14-bit structure and additional front
end filters will provide better basic performance than earlier RSP models
I've owned.I expect it to be neck-and-neck with the AirSpy HF+ SDRs in a
quiet DXpedition setting...maybe not so much in my suburban RF jungle.

SDRplay looks to be the most active of all the SDR software developers, and
they say they fully intend to offer phasing features in a future release of
SDRuno software. Their activity, enthusiasm, and customer support make me
think they are the group most likely to take software phasing out of the
laboratory and into the DXer's shack. If he has the time and inclination,
Simon Brown of SDR-Console software could implement RSPduo phasing too, but
he's *not* dropped any hints about this.

73,

Guy Atkins
Puyallup, WA
___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

Re: [IRCA] phasing units, then and now

[Brandon Jordan]

Hi Mark. That is a very amazing history lesson! Thank you taking the time to 
post it.

73,
Brandon
___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

Re: [IRCA] phasing units, then and now

[Mark Mobile]

Mark:  Nice history.  Thank you!




Cheers!

Mark Durenberger, mobile


-Original Message- 
From: Mark Connelly via IRCA

Sent: Friday, July 06, 2018 10:18 PM
To: irca@hard-core-dx.com
Cc: Mark Connelly
Subject: [IRCA] phasing units, then and now

___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the 
original contributors and do not necessarily reflect the opinion of the 
IRCA, its editors, publishing staff, or officers


For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com

___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@hard-core-dx.com