RE: Building Qt for Tizen IVI M2

[VanCutsem, Geoffroy]

Hi Tomasz,

We typically always publish the debuginfo RPMs too... why would you not want to 
build and distribute these (I don't personnally consider these 'dirty' packages 
:))?

But to your question: I don't know of a way of not building the *-debuginfo-* 
RPMs.

Thanks,
Geoffroy

From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On 
Behalf Of Tomasz Olszak
Sent: Wednesday, August 28, 2013 4:17 PM
To: Chang, Esmond
Cc: ivi@lists.tizen.org
Subject: Re: Building Qt for Tizen IVI M2

One more question :)
Is there a way to extract(or not to build) debuginfo packages from gbs build?
I have many debug info packages in e.g. 
~/GBS-ROOT/local/repos/tizen_3.0_dev/i586/RPMS and they are also listed 
somewhere in ~/GBS-ROOT/local/repos/tizen_3.0_dev/i586/repodata. I would like 
to have clean release packages repository.

--
regards
Tomasz Olszak

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Tomasz Olszak]

One more question :)

Is there a way to extract(or not to build) debuginfo packages from gbs
build?
I have many debug info packages in e.g.
~/GBS-ROOT/local/repos/tizen_3.0_dev/i586/RPMS and they are also listed
somewhere in ~/GBS-ROOT/local/repos/tizen_3.0_dev/i586/repodata. I would
like to have clean release packages repository.

-- 
regards
Tomasz Olszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Tomasz Olszak]

2013/8/28 Chang, Esmond 

>  Hi Tomasz,
>
> ** **
>
> Do you know if Qt run on TizenIVI2.0 with X? Can I follow the instruction
> here to build the Qt run on TizenIVI2.0? Or other experience you can share?
> Thanks..
>
> http://qt-project.org/wiki/Tizen
>
> **
>
Hi,
In qt-project wiki you will find url to tizenbuildtools repository. It has
tools to automate build Qt for Tizen 2.2 emulator(i386) and Samsung
developer devices(arm). The main problem it with preparing sysroot for
cross compilation. As I See Tizen 2.2 is different from IVI 3.0 because
simple unpacking rpm's into one directory was sufficient. When I tried to
make it that way in IVI 3.0 it i didn't work (not all kernel headers was
available in includepath). I suppose that there were some post installl
scripts which made symbolic links to proper includepath directories and so
on. Anyway I hadn't got much time to analyze it so I tried gbs and it
worked.

If Tizen 2.0 Packages are more like Tizen 2.2 emulator then tizenbuildtools
can be used. It will download all rpms by wget and extract them to sysroot
directory, then download qt sources and build them.
I'm working on providing Tizen packages for IVI 3.0 and Tizen 2.2. I only
need to wait a few days for hosting service. If you are not in a hurry them
I suggest to wait a few days and use prepared specs (spec files for 2.2
should also work with 2.0 - maybe small modifications will be needed). If
you want to try it now then I can check out the tizenbuildtools this
evening (polish evening:) ) for [1] repo and maybe make a branch in
tizenbuildtools for your purpose.


[1]
http://download.tizen.org/snapshots/2.0/ivi/latest/repos/ivi/ia32/packages/
-- 
regards / pozdrawiam, Tomasz Olszak
Qt for Tizen | http://qt-project.org/wiki/Tizen
Qt Certified Developer | http://qt-project.org
http://linkedin.com/in/tolszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Building Qt for Tizen IVI M2

[Chang, Esmond]

Hi Tomasz,

Do you know if Qt run on TizenIVI2.0 with X? Can I follow the instruction here 
to build the Qt run on TizenIVI2.0? Or other experience you can share? Thanks..
http://qt-project.org/wiki/Tizen

Regards,
Esmond
From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On 
Behalf Of Tomasz Olszak
Sent: Friday, August 23, 2013 3:18 PM
To: Lynch, Rusty
Cc: ivi@lists.tizen.org
Subject: Re: Building Qt for Tizen IVI M2

Hi,
First I would like to thank all of you for help and support.
I managed to build almost all qt packages and run sample applications on IVI 
with wayland.
I also found out why 3d acceleration didn't work on VMWare Player on Linux 
hosts and I was able to use Player on Ubuntu 13.04 (Workstation has no free for 
non-commercial use license). I edited wiki page [1] accordingly

In next week I plan to provide external repository with qt packages and I will 
kindly ask to do some simple tests on real devices.

[1] 
https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware#Setting_up_VMware.C2.AE_on_your_host

<https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware#Setting_up_VMware.C2.AE_on_your_host>Thanks
 once again,
Tomasz Olszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Building Qt for Tizen IVI M2

[VanCutsem, Geoffroy]

From: Tomasz Olszak [mailto:olszak.tom...@gmail.com]
Sent: Friday, August 23, 2013 2:27 PM
To: VanCutsem, Geoffroy
Cc: Lynch, Rusty; ivi@lists.tizen.org
Subject: Re: Building Qt for Tizen IVI M2

2013/8/23 VanCutsem, Geoffroy 
mailto:geoffroy.vancut...@intel.com>>
Hi Tomasz,

From: ivi-boun...@lists.tizen.org<mailto:ivi-boun...@lists.tizen.org> 
[mailto:ivi-boun...@lists.tizen.org<mailto:ivi-boun...@lists.tizen.org>] On 
Behalf Of Tomasz Olszak
Sent: Friday, August 23, 2013 9:18 AM
To: Lynch, Rusty

Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Re: Building Qt for Tizen IVI M2

Hi,
First I would like to thank all of you for help and support.
I managed to build almost all qt packages and run sample applications on IVI 
with wayland.
[Geoffroy] Nice!
I also found out why 3d acceleration didn't work on VMWare Player on Linux 
hosts and I was able to use Player on Ubuntu 13.04 (Workstation has no free for 
non-commercial use license). I edited wiki page [1] accordingly
[Geoffroy] This looks very promising... and thanks for updating the wiki page 
along the way! I've quickly tried this on my Ubuntu 13.04 but that did not 
work... are you running in 32-bit or 64-bit mode? Have you possibly installed 
some other package that may be required and that are not installed out of the 
box?
I uninstalled workstation and used clean VMware-Player-5.0.2-1031769 on Ubuntu 
13.04 32 bit. I used lastest IVI 3.0 M2 
image(tizen_20130821.3_ivi-mbr-i586-sdb.raw), changed sdb to sda and added
mks.gl.allowBlacklistedDrivers = "TRUE"
line. I would like to mention that i have Intel Graphics on my desktop.

Ha... silly me! I had skipped that thinking it was a Workstation thing... now 
that I've added it, it works on my system too! :)

I've made minor tweaks to the wiki page to reflect that.

Thanks again!
Geoffroy
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Tomasz Olszak]

2013/8/23 VanCutsem, Geoffroy 

>  Hi Tomasz,
>
> ** **
>
> *From:* ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] *On
> Behalf Of *Tomasz Olszak
> *Sent:* Friday, August 23, 2013 9:18 AM
> *To:* Lynch, Rusty
>
> *Cc:* ivi@lists.tizen.org
> *Subject:* Re: Building Qt for Tizen IVI M2
>
>  ** **
>
> Hi,
>
> First I would like to thank all of you for help and support.
>
> I managed to build almost all qt packages and run sample applications on
> IVI with wayland.
>
> [Geoffroy] Nice!
>
> I also found out why 3d acceleration didn't work on VMWare Player on Linux
> hosts and I was able to use Player on Ubuntu 13.04 (Workstation has no free
> for non-commercial use license). I edited wiki page [1] accordingly
>
> [Geoffroy] This looks very promising… and thanks for updating the wiki
> page along the way! I’ve quickly tried this on my Ubuntu 13.04 but that did
> not work… are you running in 32-bit or 64-bit mode? Have you possibly
> installed some other package that may be required and that are not
> installed out of the box?
>
I uninstalled workstation and used clean VMware-Player-5.0.2-1031769 on
Ubuntu 13.04 32 bit. I used lastest IVI 3.0 M2
image(tizen_20130821.3_ivi-mbr-i586-sdb.raw), changed sdb to sda and added
mks.gl.allowBlacklistedDrivers = "TRUE"
line. I would like to mention that i have Intel Graphics on my desktop.
When I turned the VM on there was communicate that 3d acceleration may have
issues with my host graphics but I simply ignored it.

Perhaps I have edited wiki to early - but it looked like it should work on
other hosts too.

See if your Player runs from your user account. driconf creates .drirc file
in your home directory.

Regards,
Tomasz
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Building Qt for Tizen IVI M2

[VanCutsem, Geoffroy]

Hi Tomasz,

From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On 
Behalf Of Tomasz Olszak
Sent: Friday, August 23, 2013 9:18 AM
To: Lynch, Rusty
Cc: ivi@lists.tizen.org
Subject: Re: Building Qt for Tizen IVI M2

Hi,
First I would like to thank all of you for help and support.
I managed to build almost all qt packages and run sample applications on IVI 
with wayland.
[Geoffroy] Nice!
I also found out why 3d acceleration didn't work on VMWare Player on Linux 
hosts and I was able to use Player on Ubuntu 13.04 (Workstation has no free for 
non-commercial use license). I edited wiki page [1] accordingly
[Geoffroy] This looks very promising... and thanks for updating the wiki page 
along the way! I've quickly tried this on my Ubuntu 13.04 but that did not 
work... are you running in 32-bit or 64-bit mode? Have you possibly installed 
some other package that may be required and that are not installed out of the 
box?

In next week I plan to provide external repository with qt packages and I will 
kindly ask to do some simple tests on real devices.

[1] 
https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware#Setting_up_VMware.C2.AE_on_your_host

<https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware#Setting_up_VMware.C2.AE_on_your_host>Thanks
 once again,
Tomasz Olszak
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Tomasz Olszak]

Hi,
First I would like to thank all of you for help and support.
I managed to build almost all qt packages and run sample applications on
IVI with wayland.
I also found out why 3d acceleration didn't work on VMWare Player on Linux
hosts and I was able to use Player on Ubuntu 13.04 (Workstation has no free
for non-commercial use license). I edited wiki page [1] accordingly

In next week I plan to provide external repository with qt packages and I
will kindly ask to do some simple tests on real devices.

[1]
https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware#Setting_up_VMware.C2.AE_on_your_host

Thanks
once again,
Tomasz Olszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Tomasz Olszak]

2013/8/20 Rusty Lynch 

> On Tue, 2013-08-20 at 12:32 +0200, Tomasz Olszak wrote:
> > > 3. Building existing projects/repositories is clear to me
> > (just clone repo
> > > and make gbs build with proper tizen IVI gbs.conf file)
> >
> > > 4. Building and creating new projects is not clear. I can
> > only suppose that
> > > project need to be git based (contains .git directory and
> > its content). I
> > > don't know what tar.gz file you had in mind and what is the
> > packaging
> > > directory (I tried to looks docs for gbs directory tree but
> > couldn't find
> > > any)
> >
> >
> > I already gave you some pointers to gbs import (or run gbs
> > import --help)
> > I  didn't guess that
> > 1) tar.gz file imported to a local git tree
> > was about using gbs import.
> >
> >
> > Thank you for your support.
>
> Do you have a set of qt git trees hosted at some location with your
> experimental packaging changes on top of the upstream code? Perhaps a
> personal gitorious tree?
>
>--rusty
>
>
>
>
I manage to make everything work. Now I am struggling with spec but it is
not related gbs :) and I feel confident now :)

When I manage to build everything I will prepare some wiki article about it.
Anyway I think that I'm over the hump now.

Thanks once again.

-- 
regards / pozdrawiam, Tomasz Olszak
Qt for Tizen | http://qt-project.org/wiki/Tizen
Qt Certified Developer | http://qt-project.org
http://linkedin.com/in/tolszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Rusty Lynch]

On Tue, 2013-08-20 at 12:32 +0200, Tomasz Olszak wrote:
> > 3. Building existing projects/repositories is clear to me
> (just clone repo
> > and make gbs build with proper tizen IVI gbs.conf file)
> 
> > 4. Building and creating new projects is not clear. I can
> only suppose that
> > project need to be git based (contains .git directory and
> its content). I
> > don't know what tar.gz file you had in mind and what is the
> packaging
> > directory (I tried to looks docs for gbs directory tree but
> couldn't find
> > any)
> 
> 
> I already gave you some pointers to gbs import (or run gbs
> import --help)
> I  didn't guess that 
> 1) tar.gz file imported to a local git tree 
> was about using gbs import. 
> 
> 
> Thank you for your support. 

Do you have a set of qt git trees hosted at some location with your
experimental packaging changes on top of the upstream code? Perhaps a
personal gitorious tree?

   --rusty



___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Tomasz Olszak]

>
> > 3. Building existing projects/repositories is clear to me (just clone
> repo
> > and make gbs build with proper tizen IVI gbs.conf file)
> > 4. Building and creating new projects is not clear. I can only suppose
> that
> > project need to be git based (contains .git directory and its content). I
> > don't know what tar.gz file you had in mind and what is the packaging
> > directory (I tried to looks docs for gbs directory tree but couldn't find
> > any)
>
> I already gave you some pointers to gbs import (or run gbs import --help)
>
I  didn't guess that
*1) tar.gz file imported to a local git tree *
was about using gbs import.

Thank you for your support.

Regards,
Tomasz Olszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Ylinen, Mikko]

On Tue, Aug 20, 2013 at 12:35 PM, Tomasz Olszak  wrote:

> Thank you for the answer. I would like to mention that I suppose that repo
> sync hangs because I added
> Host tizen
>  
>
> to my .ssh/config and it should be
> Host review.tizen.org.
> Both names occurs in wiki and docs so I simply copy and paste some build
> instructions and encounter such issue. Using adequate url's should solve the
> problem.

make sure your .ssh/config contains proper Port: config as well.

> Unfortunately I think that I need more help with build process. So far I
> have some understanding of gbs but... could you please correct following
> statements or give an advice regarding some of them.
> 1. The only thing I need to build Qt for Tizen IVI is gbs build.

correct

> 2. Qt base module needs to run configure script before compilation part. It
> looks for different dependencies in sysroot and makes some assumptions
> (e.g. If it finds glib then glib event loop is used as Qt event loop, if it
> finds gstreamer then it uses it as backend for multimedia and so on). I need

Just add all these as "BuildRequires: " in your qt.spec file

> to do that after dependencies will appear in rootstrap. It should be done by
> gbs. Additionally qt uses internally qmake tool for creating makefiles, I
> know that there is possibility of building Qt with CMake but i don't know
> state of this and would rather not to test it now.

You can first build qmake with gbs and then have your qt build use that.

You need to have them under the same directory:

src/qt
src/qmake

and then

$ gbs build -A  src/

> 3. Building existing projects/repositories is clear to me (just clone repo
> and make gbs build with proper tizen IVI gbs.conf file)
> 4. Building and creating new projects is not clear. I can only suppose that
> project need to be git based (contains .git directory and its content). I
> don't know what tar.gz file you had in mind and what is the packaging
> directory (I tried to looks docs for gbs directory tree but couldn't find
> any)

I already gave you some pointers to gbs import (or run gbs import --help)

Mikko
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Tomasz Olszak]

2013/8/20 Ylinen, Mikko 

> On Tue, Aug 20, 2013 at 8:51 AM, Tomasz Olszak 
> wrote:
> > Correct me if I am wrong but it looks like it is can be helpful when I
> will
> > want to provide Qt projects/packages for Tizen.
> > What I need now is a way to prepare ivi rootstrap from command line. I
> tried
>
> GBS does it automatically for you.
>
> I realized we're missing documentation how to make new source code
> buildable in Tizen.  [1] and [2] are quite close thought.
>
> What you need is
>
> 1) tar.gz file imported to a local git tree
> 2) .spec file in the packaging/ directory with all build dependencies
> listed there
> 3) gbs build
>
> > to follow
> >
> https://source.tizen.org/documentation/developer-guide/creating-tizen-platform-image-scratch-through-local-build
> > But it hangs on repo sync:
> >
> >
> > ssh: connect to host review.tizen.org port 22: Connection timed out
> > ssh: connect to host review.tizen.org port 22: Connection timed out
> > ssh: connect to host review.tizen.org port 22: Connection timed out
> > ssh: connect to host review.tizen.org port 22: Connection timed out
> > ssh: connect to host review.tizen.org port 22: Connection timed out
> > fatal: Could not read from remote repository.
> >
> > Please make sure you have the correct access rights
> > and the repository exists.
> > fatal: Could not read from remote repository.
>
> (I did not test this but it looks you might have to modify the manifest
> .xml fetch url to ssh://@review.tizen.org:29418)
>
> > It is needed for gbs build right? In the time of writing this mail
> someone
>
> it is not needed.
>
> > also encounter such problem and I asked the question in the thread
> > too(https://lists.tizen.org/pipermail/ivi/2013-August/000792.html).
> Mikko
> > Ilynen pointed out that there should be no reason to build whole IVI
> > locally. How do I create rootstrap for cross compilation and development
> > then?
>
> Just follow the guidance I wrote above.
>
> -- Mikko
>

Thank you for the answer. I would like to mention that I suppose that repo
sync hangs because I added
Host tizen
 

to my .ssh/config and it should be
Host review.tizen.org.
Both names occurs in wiki and docs so I simply copy and paste some build
instructions and encounter such issue. Using adequate url's should solve
the problem.

Unfortunately I think that I need more help with build process. So far I
have some understanding of gbs but... could you please correct following
statements or give an advice regarding some of them.
1. The only thing I need to build Qt for Tizen IVI is gbs build.
2. Qt base module needs to run configure script before compilation part. It
looks for different dependencies in sysroot and makes some assumptions
(e.g. If it finds glib then glib event loop is used as Qt event loop, if it
finds gstreamer then it uses it as backend for multimedia and so on). I
need to do that after dependencies will appear in rootstrap. It should be
done by gbs. Additionally qt uses internally qmake tool for creating
makefiles, I know that there is possibility of building Qt with CMake but i
don't know state of this and would rather not to test it now.
3. Building existing projects/repositories is clear to me (just clone repo
and make gbs build with proper tizen IVI gbs.conf file).
4. Building and creating new projects is not clear. I can only suppose that
project need to be git based (contains .git directory and its content). I
don't know what tar.gz file you had in mind and what is the packaging
directory (I tried to looks docs for gbs directory tree but couldn't find
any)

I'm sorry for being troublesome and ask for your understanding. Barriers to
entry look rather high for gbs...

-- 
regards / pozdrawiam, Tomasz Olszak
Qt for Tizen | http://qt-project.org/wiki/Tizen
Qt Certified Developer | http://qt-project.org
http://linkedin.com/in/tolszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Ylinen, Mikko]

On Tue, Aug 20, 2013 at 8:51 AM, Tomasz Olszak  wrote:
> Correct me if I am wrong but it looks like it is can be helpful when I will
> want to provide Qt projects/packages for Tizen.
> What I need now is a way to prepare ivi rootstrap from command line. I tried

GBS does it automatically for you.

I realized we're missing documentation how to make new source code
buildable in Tizen.  [1] and [2] are quite close thought.

What you need is

1) tar.gz file imported to a local git tree
2) .spec file in the packaging/ directory with all build dependencies
listed there
3) gbs build

> to follow
> https://source.tizen.org/documentation/developer-guide/creating-tizen-platform-image-scratch-through-local-build
> But it hangs on repo sync:
>
>
> ssh: connect to host review.tizen.org port 22: Connection timed out
> ssh: connect to host review.tizen.org port 22: Connection timed out
> ssh: connect to host review.tizen.org port 22: Connection timed out
> ssh: connect to host review.tizen.org port 22: Connection timed out
> ssh: connect to host review.tizen.org port 22: Connection timed out
> fatal: Could not read from remote repository.
>
> Please make sure you have the correct access rights
> and the repository exists.
> fatal: Could not read from remote repository.

(I did not test this but it looks you might have to modify the manifest
.xml fetch url to ssh://@review.tizen.org:29418)

> It is needed for gbs build right? In the time of writing this mail someone

it is not needed.

> also encounter such problem and I asked the question in the thread
> too(https://lists.tizen.org/pipermail/ivi/2013-August/000792.html). Mikko
> Ilynen pointed out that there should be no reason to build whole IVI
> locally. How do I create rootstrap for cross compilation and development
> then?

Just follow the guidance I wrote above.

-- Mikko
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Tomasz Olszak]

2013/8/13 VanCutsem, Geoffroy 

>
>
> > -Original Message-
> > From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org]
> On
> > Behalf Of Rusty Lynch
> > Sent: Monday, August 12, 2013 7:10 PM
> > To: Tomasz Olszak
> > Cc: ivi@lists.tizen.org
> > Subject: Re: Building Qt for Tizen IVI M2
> >
> > On Mon, 2013-08-12 at 17:03 +, Tomasz Olszak wrote:
> > > 2013/8/12 Rees, Kevron 
> > > Why are you not using gbs to build?  Or are you?
> > 
> >
> > > Kevron, I asked for build privilege on tizen.org 2 weeks ago but still
> > > don't get any answer.
> >
> > You should be using local gbs builds instead of remote builds that
> require
> > build server access (something not generally available).
>
> For what it's worth, I try to keep the 'How to contribute to Tizen IVI'
> wiki [1] page up-to-date. It's not a replacement for reading the complete
> GBS documentation [2] but I do try to provide additional and relevant info
> for those working on Tizen IVI. I include for example a gbs.conf that is
> pre-configured for the latest Tizen IVI monthly preview:
> https://wiki.tizen.org/wiki/How_to_contribute_to_Tizen_IVI#Setting_up_GBS_for_Tizen_IVI
>
> Any suggestions/comments on how to improve this page are obviously welcome!
>
> Geoffroy
>
> [1] https://wiki.tizen.org/wiki/How_to_contribute_to_Tizen_IVI
> [2] https://source.tizen.org/documentation/reference/git-build-system/
>
> Intel Corporation NV/SA
> Kings Square, Veldkant 31
> 2550 Kontich
> RPM (Bruxelles) 0415.497.718.
> Citibank, Brussels, account 570/1031255/09
>
> This e-mail and any attachments may contain confidential material for the
> sole use of the intended recipient(s). Any review or distribution by others
> is strictly prohibited. If you are not the intended recipient, please
> contact the sender and delete all copies.
>
>
Thanks for detailed description.
Correct me if I am wrong but it looks like it is can be helpful when I will
want to provide Qt projects/packages for Tizen.
What I need now is a way to prepare ivi rootstrap from command line. I
tried to follow
https://source.tizen.org/documentation/developer-guide/creating-tizen-platform-image-scratch-through-local-build
But it hangs on repo sync:


ssh: connect to host review.tizen.org port 22: Connection timed out
ssh: connect to host review.tizen.org port 22: Connection timed out
ssh: connect to host review.tizen.org port 22: Connection timed out
ssh: connect to host review.tizen.org port 22: Connection timed out
ssh: connect to host review.tizen.org port 22: Connection timed out
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.
fatal: Could not read from remote repository.


It is needed for gbs build right? In the time of writing this mail someone
also encounter such problem and I asked the question in the thread too(
https://lists.tizen.org/pipermail/ivi/2013-August/000792.html). Mikko
Ilynen pointed out that there should be no reason to build whole IVI
locally. How do I create rootstrap for cross compilation and development
then?

When I will successfully build whole IVI I will try to build Qt using
created rootstrap as Qt sysroot and try out Qt wayland pluging.

Sorry if my questions are banal but I couldn't find documentation of
creating platform image from scratch that will work in my env(Ubuntu 13.04).

Regarding https://wiki.tizen.org/wiki/How_to_contribute_to_Tizen_IVI article
- could you please add some bits about how to start a new project - not
only contribute to existing one? Is there any sandbox area in
review.tizen.org for some kind of community alpha stage addons?

-- 
regards / pozdrawiam, Tomasz Olszak
Qt for Tizen | http://qt-project.org/wiki/Tizen
Qt Certified Developer | http://qt-project.org
http://linkedin.com/in/tolszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Building Qt for Tizen IVI M2

[VanCutsem, Geoffroy]

> -Original Message-
> From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On
> Behalf Of Rusty Lynch
> Sent: Monday, August 12, 2013 7:10 PM
> To: Tomasz Olszak
> Cc: ivi@lists.tizen.org
> Subject: Re: Building Qt for Tizen IVI M2
> 
> On Mon, 2013-08-12 at 17:03 +, Tomasz Olszak wrote:
> > 2013/8/12 Rees, Kevron 
> > Why are you not using gbs to build?  Or are you?
> 
> 
> > Kevron, I asked for build privilege on tizen.org 2 weeks ago but still
> > don't get any answer.
> 
> You should be using local gbs builds instead of remote builds that require
> build server access (something not generally available).

For what it's worth, I try to keep the 'How to contribute to Tizen IVI' wiki 
[1] page up-to-date. It's not a replacement for reading the complete GBS 
documentation [2] but I do try to provide additional and relevant info for 
those working on Tizen IVI. I include for example a gbs.conf that is 
pre-configured for the latest Tizen IVI monthly preview: 
https://wiki.tizen.org/wiki/How_to_contribute_to_Tizen_IVI#Setting_up_GBS_for_Tizen_IVI

Any suggestions/comments on how to improve this page are obviously welcome!

Geoffroy

[1] https://wiki.tizen.org/wiki/How_to_contribute_to_Tizen_IVI
[2] https://source.tizen.org/documentation/reference/git-build-system/

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Rusty Lynch]

On Mon, 2013-08-12 at 17:03 +, Tomasz Olszak wrote:
> 2013/8/12 Rees, Kevron 
> Why are you not using gbs to build?  Or are you?


> Kevron, I asked for build privilege on tizen.org 2 weeks ago but still
> don't get any answer. 

You should be using local gbs builds instead of remote builds that
require build server access (something not generally available).

--rusty


___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Tomasz Olszak]

2013/8/12 Rees, Kevron 

> Why are you not using gbs to build?  Or are you?
>
>
> On Mon, Aug 12, 2013 at 7:05 AM, VanCutsem, Geoffroy <
> geoffroy.vancut...@intel.com> wrote:
>
>>  Hi Tomasz,
>>
>> ** **
>>
>> *From:* ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org]
>> *On Behalf Of *Tomasz Olszak
>> *Sent:* Saturday, August 10, 2013 6:23 PM
>> *To:* ivi@lists.tizen.org
>> *Subject:* Building Qt for Tizen IVI M2
>>
>> ** **
>>
>> Hi,
>>
>> ** **
>>
>> As far as I remeber I was able to build(crosscompile) Qt for IVI M1. I
>> simply downloaded all packages from:
>>
>> http://download.tizen.org/releases/milestone/tizen/ivi/latest/repos/ivi/ia32/packages
>> 
>>
>> ** **
>>
>> unpacked them into one directory and treated it as rootfs. Now with M2
>> something has changed. 
>>
>> I don't have e.g. asm/errno.h and asm/types.th in /usr/include (I think
>> that there was something like bootstrap directory in root directory which
>> has these headers).
>>
>> [Geoffroy] IIRC, these used to be installed by the kernel-headers
>> package. There does not seem to be such package in M2 anymore and it **
>> looks** like it’s replaced by the linux-glibc-devel package. Can you
>> this a try and let us know if it helps?
>>
>> ** **
>>
>> Cheers,
>>
>> Geoffroy
>>
>> Intel Corporation NV/SA
>> Kings Square, Veldkant 31
>> 2550 Kontich
>> RPM (Bruxelles) 0415.497.718.
>> Citibank, Brussels, account 570/1031255/09
>>
>> This e-mail and any attachments may contain confidential material for the
>> sole use of the intended recipient(s). Any review or distribution by others
>> is strictly prohibited. If you are not the intended recipient, please
>> contact the sender and delete all copies.
>>
>> ___
>> IVI mailing list
>> IVI@lists.tizen.org
>> https://lists.tizen.org/listinfo/ivi
>>
>>
>
Geoffroy, I will try this out.
Kevron, I asked for build privilege on tizen.org 2 weeks ago but still
don't get any answer.
But when I checked while writing this email - I have access to gerrit now
(I didn't have it 2 days ago :) ). So now I can try with gbs.

But on second thought, I did't get any information about giving me the
access and there is no information about it in my tizen.org account. Is
there any way that I can confirm that?


-- 
regards,
Tomasz Olszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Building Qt for Tizen IVI M2

[Rees, Kevron]

Why are you not using gbs to build?  Or are you?


On Mon, Aug 12, 2013 at 7:05 AM, VanCutsem, Geoffroy <
geoffroy.vancut...@intel.com> wrote:

>  Hi Tomasz,
>
> ** **
>
> *From:* ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] *On
> Behalf Of *Tomasz Olszak
> *Sent:* Saturday, August 10, 2013 6:23 PM
> *To:* ivi@lists.tizen.org
> *Subject:* Building Qt for Tizen IVI M2
>
> ** **
>
> Hi,
>
> ** **
>
> As far as I remeber I was able to build(crosscompile) Qt for IVI M1. I
> simply downloaded all packages from:
>
> http://download.tizen.org/releases/milestone/tizen/ivi/latest/repos/ivi/ia32/packages
> 
>
> ** **
>
> unpacked them into one directory and treated it as rootfs. Now with M2
> something has changed. 
>
> I don't have e.g. asm/errno.h and asm/types.th in /usr/include (I think
> that there was something like bootstrap directory in root directory which
> has these headers).
>
> [Geoffroy] IIRC, these used to be installed by the kernel-headers package.
> There does not seem to be such package in M2 anymore and it **looks**
> like it’s replaced by the linux-glibc-devel package. Can you this a try and
> let us know if it helps?
>
> ** **
>
> Cheers,
>
> Geoffroy
>
> Intel Corporation NV/SA
> Kings Square, Veldkant 31
> 2550 Kontich
> RPM (Bruxelles) 0415.497.718.
> Citibank, Brussels, account 570/1031255/09
>
> This e-mail and any attachments may contain confidential material for the
> sole use of the intended recipient(s). Any review or distribution by others
> is strictly prohibited. If you are not the intended recipient, please
> contact the sender and delete all copies.
>
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi
>
>
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Building Qt for Tizen IVI M2

[VanCutsem, Geoffroy]

Hi Tomasz,

From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On 
Behalf Of Tomasz Olszak
Sent: Saturday, August 10, 2013 6:23 PM
To: ivi@lists.tizen.org
Subject: Building Qt for Tizen IVI M2

Hi,

As far as I remeber I was able to build(crosscompile) Qt for IVI M1. I simply 
downloaded all packages from:
http://download.tizen.org/releases/milestone/tizen/ivi/latest/repos/ivi/ia32/packages<http://download.tizen.org/releases/milestone/tizen/ivi/latest/repos/ivi/ia32/packages/>

unpacked them into one directory and treated it as rootfs. Now with M2 
something has changed.
I don't have e.g. asm/errno.h and asm/types.th<http://types.th> in /usr/include 
(I think that there was something like bootstrap directory in root directory 
which has these headers).
[Geoffroy] IIRC, these used to be installed by the kernel-headers package. 
There does not seem to be such package in M2 anymore and it *looks* like it's 
replaced by the linux-glibc-devel package. Can you this a try and let us know 
if it helps?

Cheers,
Geoffroy
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Building Qt for Tizen IVI M2

[Tomasz Olszak]

Hi,

As far as I remeber I was able to build(crosscompile) Qt for IVI M1. I
simply downloaded all packages from:
http://download.tizen.org/releases/milestone/tizen/ivi/latest/repos/ivi/ia32/packages

unpacked them into one directory and treated it as rootfs. Now with M2
something has changed.
I don't have e.g. asm/errno.h and asm/types.th in /usr/include (I think
that there was something like bootstrap directory in root directory which
has these headers).

Do you know how could I prepare rootfs for crosscompilation? Or maybe there
is somewhere such development image.

I use i386 gnu compiler from Tizen SDK. I would prefer not to build Qt in
vmware image - rather crosscompile on desktop and install on image.

-- 
regards,
Tomasz Olszak
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi