Re: [JAWS-Users] keystrokes to verticly center in ms word 2007
that's it. bad choice of words by me, thanks -Original Message- From: Mario Sent: Thursday, August 18, 2016 7:21 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 Tom, I don't know of a JAWS keystroke, but to Center Text Vertically Using Word 2010 (I would imagine it would be similar in 2007): 1. Select the text you would like to have vertically centered. 2. Press Alt+P, followed by S, followed by P. 3. The Page Setup dialog will appear, you will be placed on the Margins page. 4. Control+Tab twice or until you land on the Layout Tab. 5. Tab about 5 or 6 times until you get to the Vertical Alignment combo box. 6. Down arrow to Center, or you can press the letter C when arriving at this combo box. 7. Tab once to the Apply To combo box. 8. Down arrow to center selection. 9. Press Enter twice, the first Enter will close the combo box and the second Enter will activate the OK button. Original Message From: Tom Clary [mailto:tclar...@gmail.com] Sent: Thursday, Aug 18, 2016 5:15 PM EST To: jaws-users-list Subject: [JAWS-Users] keystrokes to vertically center in ms word 2007 is there a jaws keystroke combination to vertically center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to vertically center in ms word 2007
that's it, thank you -Original Message- From: Justin Williams Sent: Thursday, August 18, 2016 6:57 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to vertically center in ms word 2007 I looked this up. Try this below. 1. Select the text you would like to have vertically centered. 2. Press Alt+P, followed by S, followed by P. 3. The Page Setup dialog will appear; you will be placed on the Margins page. 4. Control+Tab twice or until you land on the Layout Tab. 5. Tab about 5 or 6 times until you get to the Vertical Alignment combo box. 6. Down arrow to Center, or you can press the letter C when arriving at this combo box. 7. Tab once to the Apply To combo box. 8. Down arrow to center selection. 9. Press Enter twice; the first Enter will close the combo box and the second Enter will activate the OK button. Finished. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of wayne smith Sent: Thursday, August 18, 2016 7:47 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to vertically center in ms word 2007 Will that center it vertically? I thought that Control e was for horizontal centering. Wayne -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Thursday, August 18, 2016 5:34 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 Control e will senter text. Just write the paragraph, then select it, and hit control e is see if that works. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Clary Sent: Thursday, August 18, 2016 5:15 PM To: jaws-users-list Subject: [JAWS-Users] keystrokes to verticly center in ms word 2007 is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to vertically center in ms word 2007
Great minds think alike. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mario Sent: Thursday, August 18, 2016 8:44 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to vertically center in ms word 2007 hey Justin, looks like you and I are looking at the same notes. lol Original Message From: Justin Williams [mailto:justin.willia...@gmail.com] Sent: Thursday, Aug 18, 2016 7:57 PM EST To: Subject: [JAWS-Users] keystrokes to vertically center in ms word 2007 I looked this up. Try this below. > 1. Select the text you would like to have vertically centered. 2. Press Alt+P, followed by S, followed by P. 3. The Page Setup dialog will appear; you will be placed on the Margins page. 4. Control+Tab twice or until you land on the Layout Tab. 5. Tab about 5 or 6 times until you get to the Vertical Alignment combo box. 6. Down arrow to Center, or you can press the letter C when arriving at this combo box. 7. Tab once to the Apply To combo box. 8. Down arrow to center selection. 9. Press Enter twice; the first Enter will close the combo box and the second Enter will activate the OK button. Finished. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of wayne smith Sent: Thursday, August 18, 2016 7:47 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to vertically center in ms word 2007 Will that center it vertically? I thought that Control e was for horizontal centering. Wayne -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Thursday, August 18, 2016 5:34 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 Control e will senter text. Just write the paragraph, then select it, and hit control e is see if that works. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Clary Sent: Thursday, August 18, 2016 5:15 PM To: jaws-users-list Subject: [JAWS-Users] keystrokes to verticly center in ms word 2007 is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to vertically center in ms word 2007
hey Justin, looks like you and I are looking at the same notes. lol Original Message From: Justin Williams [mailto:justin.willia...@gmail.com] Sent: Thursday, Aug 18, 2016 7:57 PM EST To: Subject: [JAWS-Users] keystrokes to vertically center in ms word 2007 I looked this up. Try this below. > 1. Select the text you would like to have vertically centered. 2. Press Alt+P, followed by S, followed by P. 3. The Page Setup dialog will appear; you will be placed on the Margins page. 4. Control+Tab twice or until you land on the Layout Tab. 5. Tab about 5 or 6 times until you get to the Vertical Alignment combo box. 6. Down arrow to Center, or you can press the letter C when arriving at this combo box. 7. Tab once to the Apply To combo box. 8. Down arrow to center selection. 9. Press Enter twice; the first Enter will close the combo box and the second Enter will activate the OK button. Finished. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of wayne smith Sent: Thursday, August 18, 2016 7:47 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to vertically center in ms word 2007 Will that center it vertically? I thought that Control e was for horizontal centering. Wayne -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Thursday, August 18, 2016 5:34 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 Control e will senter text. Just write the paragraph, then select it, and hit control e is see if that works. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Clary Sent: Thursday, August 18, 2016 5:15 PM To: jaws-users-list Subject: [JAWS-Users] keystrokes to verticly center in ms word 2007 is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to verticly center in ms word 2007
Tom, I don't know of a JAWS keystroke, but to Center Text Vertically Using Word 2010 (I would imagine it would be similar in 2007): 1. Select the text you would like to have vertically centered. 2. Press Alt+P, followed by S, followed by P. 3. The Page Setup dialog will appear, you will be placed on the Margins page. 4. Control+Tab twice or until you land on the Layout Tab. 5. Tab about 5 or 6 times until you get to the Vertical Alignment combo box. 6. Down arrow to Center, or you can press the letter C when arriving at this combo box. 7. Tab once to the Apply To combo box. 8. Down arrow to center selection. 9. Press Enter twice, the first Enter will close the combo box and the second Enter will activate the OK button. Original Message From: Tom Clary [mailto:tclar...@gmail.com] Sent: Thursday, Aug 18, 2016 5:15 PM EST To: jaws-users-list Subject: [JAWS-Users] keystrokes to vertically center in ms word 2007 is there a jaws keystroke combination to vertically center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to vertically center in ms word 2007
I looked this up. Try this below. > > 1. Select the text you would like to have vertically centered. > 2. Press Alt+P, followed by S, followed by P. > 3. The Page Setup dialog will appear; you will be placed on the Margins > page. > 4. Control+Tab twice or until you land on the Layout Tab. > 5. Tab about 5 or 6 times until you get to the Vertical Alignment combo > box. > > 6. Down arrow to Center, or you can press the letter C when arriving at > this > combo box. > 7. Tab once to the Apply To combo box. > 8. Down arrow to center selection. > 9. Press Enter twice; the first Enter will close the combo box and the > second Enter will activate the OK button. > Finished. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of wayne smith Sent: Thursday, August 18, 2016 7:47 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to vertically center in ms word 2007 Will that center it vertically? I thought that Control e was for horizontal centering. Wayne -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Thursday, August 18, 2016 5:34 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 Control e will senter text. Just write the paragraph, then select it, and hit control e is see if that works. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Clary Sent: Thursday, August 18, 2016 5:15 PM To: jaws-users-list Subject: [JAWS-Users] keystrokes to verticly center in ms word 2007 is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to vertically center in ms word 2007
It is, I messed up. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of wayne smith Sent: Thursday, August 18, 2016 7:47 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to vertically center in ms word 2007 Will that center it vertically? I thought that Control e was for horizontal centering. Wayne -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Thursday, August 18, 2016 5:34 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 Control e will senter text. Just write the paragraph, then select it, and hit control e is see if that works. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Clary Sent: Thursday, August 18, 2016 5:15 PM To: jaws-users-list Subject: [JAWS-Users] keystrokes to verticly center in ms word 2007 is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to vertically center in ms word 2007
Will that center it vertically? I thought that Control e was for horizontal centering. Wayne -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Thursday, August 18, 2016 5:34 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 Control e will senter text. Just write the paragraph, then select it, and hit control e is see if that works. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Clary Sent: Thursday, August 18, 2016 5:15 PM To: jaws-users-list Subject: [JAWS-Users] keystrokes to verticly center in ms word 2007 is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to verticly center in ms word 2007
Oops, man you sure are right. I sitting here laughing at myself. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Sent: Thursday, August 18, 2016 7:18 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 that's horizontally -Original Message- From: Justin Williams Sent: Thursday, August 18, 2016 5:33 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 Control e will senter text. Just write the paragraph, then select it, and hit control e is see if that works. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Clary Sent: Thursday, August 18, 2016 5:15 PM To: jaws-users-list Subject: [JAWS-Users] keystrokes to verticly center in ms word 2007 is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] copying several pages of a 10 page document
thanks -Original Message- From: john_Justice Sent: Thursday, August 18, 2016 6:04 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] copying several pages of a 10 page document Tom, I'm using Word 2010 and Jaws 17. Here is how I do it. 1. Place your PC cursor on the first line at the beginning. 2. Hold down the shift key and press the Page Down button. 3. Remember. Pages in Word are usually divided into two sections. For a two page copy, you'll need to press Page down three times. 4. You have now highlighted the text. Press CONTROL+C to copy it to your clipboard. 5. Open a new Word document by pressing CONTROL+N. 6. Press CONTROL+V to paste the copied text into the new document. 7. Once this is done, I always check the work to make sure that I have copied all of the information I need. You might need to add or trim something at the top or bottom of the document. That's it, Tom. There are probably other ways to do this but I have found this method to be the most reliable. As rick would say, "HTH". JOHN AND LINDA JUSTICE PERSONAL E-MAIL: john_just...@verizon.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Sent: Wednesday, August 17, 2016 10:40 AM To: jul Subject: [JAWS-Users] copying several pages of a 10 page document could someone please refresh me on how to copy 2 continuous pages of a 10 page document. jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to verticly center in ms word 2007
that's horizontally -Original Message- From: Justin Williams Sent: Thursday, August 18, 2016 5:33 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] keystrokes to verticly center in ms word 2007 Control e will senter text. Just write the paragraph, then select it, and hit control e is see if that works. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Clary Sent: Thursday, August 18, 2016 5:15 PM To: jaws-users-list Subject: [JAWS-Users] keystrokes to verticly center in ms word 2007 is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] copying several pages of a 10 page document
Tom, I'm using Word 2010 and Jaws 17. Here is how I do it. 1. Place your PC cursor on the first line at the beginning. 2. Hold down the shift key and press the Page Down button. 3. Remember. Pages in Word are usually divided into two sections. For a two page copy, you'll need to press Page down three times. 4. You have now highlighted the text. Press CONTROL+C to copy it to your clipboard. 5. Open a new Word document by pressing CONTROL+N. 6. Press CONTROL+V to paste the copied text into the new document. 7. Once this is done, I always check the work to make sure that I have copied all of the information I need. You might need to add or trim something at the top or bottom of the document. That's it, Tom. There are probably other ways to do this but I have found this method to be the most reliable. As rick would say, "HTH". JOHN AND LINDA JUSTICE PERSONAL E-MAIL: john_just...@verizon.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Sent: Wednesday, August 17, 2016 10:40 AM To: jul Subject: [JAWS-Users] copying several pages of a 10 page document could someone please refresh me on how to copy 2 continuous pages of a 10 page document. jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] keystrokes to verticly center in ms word 2007
Control e will senter text. Just write the paragraph, then select it, and hit control e is see if that works. Justin -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Clary Sent: Thursday, August 18, 2016 5:15 PM To: jaws-users-list Subject: [JAWS-Users] keystrokes to verticly center in ms word 2007 is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] jaws on the tablet
Hi, all! My question is, does one need to do something to get the tablet in touch screen mode or is it automatic? I have acer w4 821, jaws 17.0.2619 x86 on Windows 8.1. -- With best regards, Chelenger. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] keystrokes to verticly center in ms word 2007
is there a jaws keystroke combination to verticly center a paragraph in ms word 2007? jaws 17 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] JAWS 17 And WEB Based Applications
Hi, When I use web based applications, like Google Drive and Google Docs, it is much better to turn off the virtual cursor with insert+Z and then tab around or use key commands that are built into the web based application. David Moore -Original Message- From: Bob Sent: Thursday, August 18, 2016 9:12 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] JAWS 17 And WEB Based Applications Moving to items on web based applications quickly depends only on how the said items have been created. There are so many possibilities on how a set of tabs can be created that its difficult to guess. If you can navigate to the tabs with the arrow keys then listen to how they are described. If they are links then use the links list, if list items use L or I to jump between them. If you are looking for a control + tab type keystroke then this is unlikely to work as it would clash with the IE use of the same keystroke. You may benefit from some custom scripts for the app if there are specific features you would like adding. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Hicks Steven (ROYAL CORNWALL HOSPITALS NHS TRUST) Sent: 17 August 2016 22:45 To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] JAWS 17 And WEB Based Applications Hi friends, I Have a web based application which is called Service anywhere and is written by HPE. I Would like to use this with JAWS, it seems to read o.k. but JAWS seems to re-form the screen content and it will be a task of getting training and used to the screen layout I think. Does anyone have any tips on how to make web based applications more useable please? Is there a way to jump around tabs on the screen for example? The programme sems to display information on the screen with tabs at the top of the screen but JAWS is reformatting this in to what appears to be one big long list, can I jump to the different tabs easily with JAWS? Many thanks in anticipation, This message may contain confidential information. If you are not the intended recipient please inform the sender that you have received the message in error before deleting it. Please do not disclose, copy or distribute information in this e-mail or take any action in reliance on its contents: to do so is strictly prohibited and may be unlawful. Thank you for your co-operation. NHSmail is the secure email and directory service available for all NHS staff in England and Scotland NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and GSi recipients NHSmail provides an email address for your career in the NHS and can be accessed anywhere For more information and to find out how you can switch, visit www.nhsdigital.nhs.uk/nhsmail For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Epsem Scanner Driver
Just a suggestion that I am not sure will work, but it may be worth a try. With Windows 7 64 bit, there is a built in generic driver for printers that do not have a 64 bit driver produced. So, you may want to connect the printer and choose the generic printer driver Sent from my iPhone > On Aug 18, 2016, at 8:38 AM, Subash wrote: > > Hi, thank you very much for taking the time for doing a search. > I think it's something to do with the 64 bits system and the drivers. > I had it working fine on a win7 32 system Del laptop, but the computer refuse > to boot a few weeks ago, so I was trying to create a temp system to scan my > mails etc. > Thanks for trying, really appreciate it. > > -Original Message- From: Scorpio > Sent: Wednesday, August 17, 2016 10:50 PM > To: jaws-users-list@jaws-users.com > Subject: Re: [JAWS-Users] Epsem Scanner Driver > > Hi, > > Upon doing a further Google search for the "code 28" error, It's yielded two > possible results that may help you. > > I'm not saying it will, but it would seem that this is not an isolated > incident. I am sorry, as I also used the Epson Perfection 1660, but since > getting a new printer/fax machine/all-in-one, I've never looked back, and > haven't used it since. I only had the drivers because I'm a hoarder when it > comes to software and the like, and I figured that if I ever sold the > scanner, they might have trouble looking for the drivers. LOL. > > Looks like I was not wrong, though the conditions are a bit different. > Smile. > > Here are the links I found, and at the bottom, I've pasted the link to the > actual Google search in case you want to look for a better result. > > First hit/result: > > http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/epson-perfection-1660-says-there-are-no-drivers/42c23d25-73ce-490f-a83b-680d3e6015c6?auth=1 > > Second hit/result: > > https://technet.microsoft.com/en-us/library/cc731268(v=ws.10).aspx > > Actual Google Search: > > https://www.google.ca/search?num=100&newwindow=1&site=&source=hp&q=epson+1660+windows+8.1+error+code+28&oq=epson+1660+windows+8.1+error+code+28&gs_l=hp.3...4689.22922.0.23513.43.37.3.3.3.0.187.4059.14j23.37.00...1c.1.64.hp..0.35.3582.0..0j0i131k1j0i10k1j0i22i30k1j33i21k1.f5WH3fZStX0 > > Hope this helps. > > Scorpio > > -Original Message- From: Subash > Sent: Wednesday, August 17, 2016 1:27 PM > To: jaws-users-list@jaws-users.com > Subject: Re: [JAWS-Users] Epsem Scanner Driver > > Hi, even though I install the driver, I'm still getting a code28. > I un-install and re-installed; change around scanner to all available USB > ports; > Install driver before I connected scanner; > Still the same. > It's windows 8.1 64 bit system. > Any other suggestions before I get more grey hairs? :-) > -Original Message- From: Scorpio > Sent: Tuesday, August 16, 2016 9:42 PM > To: jaws-users-list@jaws-users.com > Subject: Re: [JAWS-Users] Epsem Scanner Driver > > I'm uploading the drivers now as I type this, and the link will go directly > to you, so watch out for it. > > Scorpio > > > > -Original Message- From: Subash > Sent: Tuesday, August 16, 2016 6:56 PM > To: jaws-users-list@jaws-users.com > Subject: Re: [JAWS-Users] Epsem Scanner Driver > > Hi Dave, sorry for that first response, was kind doing too many things at > the same time. > It's a 1660 flatbed. > Thanks. > > -Original Message- From: David Ferrin > Sent: Tuesday, August 16, 2016 4:11 PM > To: jaws-users-list@jaws-users.com > Subject: Re: [JAWS-Users] Epsem Scanner Driver > > The first item of business would be to find out exactly what model of > scanner it is, at that point we might have a better chance of finding the > proper driver. > > I have the driver for a 1640 SU on hand here, but that does not sound like > what you are currently in need of or so it seems. > > -Original Message- From: Subash > Sent: Tuesday, August 16, 2016 2:31 PM > To: jaws-users-list@jaws-users.com > Subject: [JAWS-Users] Epsem Scanner Driver > > Hey gang, I’m in a quandary. > I install kurzweil on a windows 8.1 computer, but when I try to install my > old epsem scanner to scan my mails, windows 8 wouldn’t recognize the driver. > I tried doing a search on the net for the drivers, but I haven’t been able > to find any thus far. > I think it’s a 1663 scanner, but not sure. > Any suggestions? > Thanks. > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked qu
[JAWS-Users] Drop Box Question-Sharing a Folder?
Hello All, I have created a folder in Drop Box which I would like to share. In the past, I was able to follow the prompts to accomplish the task, and the folder would appear in the drop box of the people with whom I wanted to share. For some reason, the only thing I can find is a link which allows access to the shared folder. No folder appears in the Drop Box of the individual I wish to share with. What am I doing wrong? How should I proceed to accomplish my task? All help is appreciated. I am using JAWS17, Windows 8.1. Thank you. Pauline For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] jaws and orbit reader 20
hello for those of you who are interested in the very low-cost, rugged, durable, orbit-reader 20 braille display which acts as a reader, editor/note-taker, file manager, and braille terminal for screen reader for around $500 here is the link to the manual. you can use it with jaws by telling jaws it is a refreshabraille 18. http://tech.aph.org/or20/or20_doc.htm -- mozilla thunderbird email client For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Epsem Scanner Driver
Hi, thank you very much for taking the time for doing a search. I think it's something to do with the 64 bits system and the drivers. I had it working fine on a win7 32 system Del laptop, but the computer refuse to boot a few weeks ago, so I was trying to create a temp system to scan my mails etc. Thanks for trying, really appreciate it. -Original Message- From: Scorpio Sent: Wednesday, August 17, 2016 10:50 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Epsem Scanner Driver Hi, Upon doing a further Google search for the "code 28" error, It's yielded two possible results that may help you. I'm not saying it will, but it would seem that this is not an isolated incident. I am sorry, as I also used the Epson Perfection 1660, but since getting a new printer/fax machine/all-in-one, I've never looked back, and haven't used it since. I only had the drivers because I'm a hoarder when it comes to software and the like, and I figured that if I ever sold the scanner, they might have trouble looking for the drivers. LOL. Looks like I was not wrong, though the conditions are a bit different. Smile. Here are the links I found, and at the bottom, I've pasted the link to the actual Google search in case you want to look for a better result. First hit/result: http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/epson-perfection-1660-says-there-are-no-drivers/42c23d25-73ce-490f-a83b-680d3e6015c6?auth=1 Second hit/result: https://technet.microsoft.com/en-us/library/cc731268(v=ws.10).aspx Actual Google Search: https://www.google.ca/search?num=100&newwindow=1&site=&source=hp&q=epson+1660+windows+8.1+error+code+28&oq=epson+1660+windows+8.1+error+code+28&gs_l=hp.3...4689.22922.0.23513.43.37.3.3.3.0.187.4059.14j23.37.00...1c.1.64.hp..0.35.3582.0..0j0i131k1j0i10k1j0i22i30k1j33i21k1.f5WH3fZStX0 Hope this helps. Scorpio -Original Message- From: Subash Sent: Wednesday, August 17, 2016 1:27 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Epsem Scanner Driver Hi, even though I install the driver, I'm still getting a code28. I un-install and re-installed; change around scanner to all available USB ports; Install driver before I connected scanner; Still the same. It's windows 8.1 64 bit system. Any other suggestions before I get more grey hairs? :-) -Original Message- From: Scorpio Sent: Tuesday, August 16, 2016 9:42 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Epsem Scanner Driver I'm uploading the drivers now as I type this, and the link will go directly to you, so watch out for it. Scorpio -Original Message- From: Subash Sent: Tuesday, August 16, 2016 6:56 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Epsem Scanner Driver Hi Dave, sorry for that first response, was kind doing too many things at the same time. It's a 1660 flatbed. Thanks. -Original Message- From: David Ferrin Sent: Tuesday, August 16, 2016 4:11 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Epsem Scanner Driver The first item of business would be to find out exactly what model of scanner it is, at that point we might have a better chance of finding the proper driver. I have the driver for a 1640 SU on hand here, but that does not sound like what you are currently in need of or so it seems. -Original Message- From: Subash Sent: Tuesday, August 16, 2016 2:31 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Epsem Scanner Driver Hey gang, I’m in a quandary. I install kurzweil on a windows 8.1 computer, but when I try to install my old epsem scanner to scan my mails, windows 8 wouldn’t recognize the driver. I tried doing a search on the net for the drivers, but I haven’t been able to find any thus far. I think it’s a 1663 scanner, but not sure. Any suggestions? Thanks. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] JAWS 17 And WEB Based Applications
Moving to items on web based applications quickly depends only on how the said items have been created. There are so many possibilities on how a set of tabs can be created that its difficult to guess. If you can navigate to the tabs with the arrow keys then listen to how they are described. If they are links then use the links list, if list items use L or I to jump between them. If you are looking for a control + tab type keystroke then this is unlikely to work as it would clash with the IE use of the same keystroke. You may benefit from some custom scripts for the app if there are specific features you would like adding. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Hicks Steven (ROYAL CORNWALL HOSPITALS NHS TRUST) Sent: 17 August 2016 22:45 To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] JAWS 17 And WEB Based Applications Hi friends, I Have a web based application which is called Service anywhere and is written by HPE. I Would like to use this with JAWS, it seems to read o.k. but JAWS seems to re-form the screen content and it will be a task of getting training and used to the screen layout I think. Does anyone have any tips on how to make web based applications more useable please? Is there a way to jump around tabs on the screen for example? The programme sems to display information on the screen with tabs at the top of the screen but JAWS is reformatting this in to what appears to be one big long list, can I jump to the different tabs easily with JAWS? Many thanks in anticipation, This message may contain confidential information. If you are not the intended recipient please inform the sender that you have received the message in error before deleting it. Please do not disclose, copy or distribute information in this e-mail or take any action in reliance on its contents: to do so is strictly prohibited and may be unlawful. Thank you for your co-operation. NHSmail is the secure email and directory service available for all NHS staff in England and Scotland NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and GSi recipients NHSmail provides an email address for your career in the NHS and can be accessed anywhere For more information and to find out how you can switch, visit www.nhsdigital.nhs.uk/nhsmail For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
